Commit actual files instead of my symlinks

I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git.

Contributes to issue CURA-6742.

1 files changed, 63 insertions, 0 deletions

diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..548cdbdb0d
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@@ -0,0 +1,63 @@
+[general]
+version = 4
+name = Normal
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 9
+type = quality
+quality_type = fast
+weight = -1
+material = generic_pc
+variant = AA 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + layer_height
+cool_fan_speed_max = 85
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+infill_overlap_mm = 0.05
+infill_pattern = triangles
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 25
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_print_temperature = =default_material_print_temperature + 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+ooze_shield_angle = 40
+prime_tower_enable = True
+prime_tower_wipe_enabled = True
+raft_airgap = 0.25
+raft_interface_thickness = =max(layer_height * 1.5, 0.225)
+retraction_count_max = 80
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 15
+skin_overlap = 30
+speed_layer_0 = =math.ceil(speed_print * 25 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_density = 87.5
+support_interface_pattern = lines
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+wall_thickness = 1.2