Commit actual files instead of my symlinks

I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git.

Contributes to issue CURA-6742.

1 files changed, 63 insertions, 0 deletions

diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..33a03d7d81
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -0,0 +1,63 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 9
+type = quality
+quality_type = draft
+weight = -2
+material = generic_tpu
+variant = AA 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 8.75
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 4
+gradual_infill_step_height = =5 * layer_height
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = cross_3d
+infill_sparse_density = 10
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 25
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
+material_final_print_temperature = =material_print_temperature
+material_flow = 106
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =material_print_temperature + 15
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_wipe_enabled = True
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop_only_when_collides = True
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = 15
+skin_overlap = 5
+speed_equalize_flow_enabled = True
+speed_layer_0 = =math.ceil(speed_print * 18 / 25)
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 0.7
+travel_avoid_distance = 1.5
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = 0.76