diff options
author | Ghostkeeper <rubend@tutanota.com> | 2019-09-04 10:23:27 +0300 |
---|---|---|
committer | Ghostkeeper <rubend@tutanota.com> | 2019-09-04 10:23:27 +0300 |
commit | 52cb68fdb38dda18c9a9f7e854509dd9d7a1d7d3 (patch) | |
tree | 3aec1ebd4fe6024739f06989977a61416d1f936c /resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg | |
parent | de7915688aa382bf0db1992539a7e93d84abe3f9 (diff) |
Commit actual files instead of my symlinks
I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git.
Contributes to issue CURA-6742.
Diffstat (limited to 'resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg')
-rw-r--r-- | resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg | 62 |
1 files changed, 62 insertions, 0 deletions
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..3bd6295712 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -0,0 +1,62 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +material = generic_tpu +variant = AA 0.8 + +[values] +brim_width = 8.75 +cool_min_layer_time_fan_speed_max = 6 +top_skin_expand_distance = =line_width * 2 +infill_before_walls = True +infill_line_width = =round(line_width * 0.7 / 0.8, 2) +infill_pattern = cross_3d +infill_sparse_density = 10 +jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) +jerk_support = =math.ceil(jerk_print * 25 / 25) +jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 +material_final_print_temperature = =material_print_temperature +material_flow = 105 +material_initial_print_temperature = =material_print_temperature +material_print_temperature_layer_0 = =material_print_temperature + 17 +material_standby_temperature = 100 +multiple_mesh_overlap = 0.2 +prime_tower_enable = True +prime_tower_flow = 100 +retract_at_layer_change = False +retraction_count_max = 12 +retraction_extra_prime_amount = 0.5 +retraction_hop = 1.5 +retraction_hop_only_when_collides = False +retraction_min_travel = =line_width * 2 +retraction_prime_speed = 15 +skin_line_width = =round(line_width * 0.78 / 0.8, 2) +speed_print = 30 +speed_topbottom = =math.ceil(speed_print * 23 / 30) + +speed_wall = =math.ceil(speed_print * 30 / 30) +speed_wall_x = =math.ceil(speed_wall * 30 / 30) +support_angle = 50 +support_bottom_distance = =support_z_distance +support_line_width = =round(line_width * 0.7 / 0.8, 2) +support_offset = =line_width +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 45 +top_bottom_thickness = 1.2 +travel_avoid_distance = 1.5 +travel_compensate_overlapping_walls_0_enabled = False +wall_0_wipe_dist = =line_width * 2 +wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) +wall_thickness = 1.3 + +jerk_travel = 50 |