Updates wall order and top surface quality

For PP-5, PP-27, PP-29

19 files changed, 17 insertions, 19 deletions

diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
index ef2cce367c..493ca436a2 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
@@ -19,5 +19,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
 wall_thickness = 0.92
 initial_layer_line_width_factor = 100
-infill_before_walls = true 
+
 material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
index f04c84f8bd..0dd0a53eb0 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
index a229a4c0af..1b1e52033b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
index b5df637996..3dd94709ee 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
index 2c87b43a3f..9a98be3135 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_before_walls = True
+
 infill_line_width = =line_width
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
index 8f1588d6aa..3f0b9e0e06 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_before_walls = True
+
 infill_line_width = =line_width
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
index 533845be93..1f43d241d3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_before_walls = True
+
 infill_line_width = =line_width
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg
index c5e359aaf3..6bdb14bdf5 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
index 513161bb05..c3af9333f1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature_layer_0 = =material_print_temperature
 material_standby_temperature = 100
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
index 5d9fa4f2da..b529b956ec 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
index 2683dafad5..8f6026e176 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
@@ -24,4 +24,3 @@ speed_wall = =math.ceil(speed_print * 30 / 40)
 jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
-infill_before_walls = true 
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
index ef23481606..fab71760d3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
@@ -25,4 +25,3 @@ speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 jerk_travel = 50
 cool_fan_speed = 20 
 initial_layer_line_width_factor = 100
-infill_before_walls = true 
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
index e29efed202..cbb178b2dd 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
@@ -25,4 +25,4 @@ jerk_travel = 50
 cool_fan_speed = 20
 layer_height_0 = 0.27
 initial_layer_line_width_factor = 100
-infill_before_walls = true 
+
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
index c02b61f9cc..d7d5ff32bf 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
index 19ad60d6b3..19bf973154 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
index e84a2c753b..a5c6902c9f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
index 97cb06d3f7..023851dded 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
index 2357faa842..82fa45fbd3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
index 143e41d1d4..dfed86dfa0 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10