Set line widths equal to nozzle diameter

and remove line width lines from profiles (PP-13)

80 files changed, 105 insertions, 214 deletions

diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
index f4a41586b8..2f7677d850 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.25
 [values]
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
@@ -32,6 +31,6 @@ speed_wall = =math.ceil(speed_print * 30 / 70)
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
+
 raft_surface_speed = 45
 speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
index 245f19fb7c..b19a7b9c7d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -19,7 +19,6 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-infill_line_width = =line_width
 infill_pattern = triangles
 infill_wipe_dist = 0.1
 jerk_enabled = True
@@ -49,5 +48,5 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
index 0d0fc4df75..a097d692dd 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
@@ -17,12 +17,11 @@ brim_width = 10
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.92
 machine_min_cool_heat_time_window = 15
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
@@ -52,5 +51,5 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg
index d50e151552..a03260d3e8 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg
@@ -15,10 +15,9 @@ variant = AA 0.25
 brim_width = 8
 cool_fan_full_at_height = =layer_height_0
 cool_min_speed = 7
-infill_line_width = =line_width
+
 infill_overlap = 10
 infill_pattern = grid
-line_width = =machine_nozzle_size * 0.92
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,7 +33,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 top_bottom_thickness = 0.72
 wall_0_inset = 0.015
 wall_0_wipe_dist = 0.25
-wall_line_width = =line_width
-wall_line_width_x= =line_width
 wall_thickness = 0.7
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
index 43a456238a..6fd7afc364 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
@@ -26,7 +26,7 @@ speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 wall_thickness = 1
 
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 speed_infill = =math.ceil(speed_print * 50 / 60)
 
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg
index a8a9a68d83..0f22b8977b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg
@@ -25,7 +25,7 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 speed_infill = =math.ceil(speed_print * 45 / 60)
 
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg
index 2e778e0ad9..3364e4720d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg
@@ -24,7 +24,7 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
 
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 speed_infill = =math.ceil(speed_print * 40 / 50)
 
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg
index ec82e4de33..93f2e1a739 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg
@@ -23,7 +23,7 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
 
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 speed_infill = =math.ceil(speed_print * 40 / 55)
 
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
index 286e2da004..9e85a31e5e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -14,7 +14,7 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 80
 cool_min_speed = 5
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
+
 infill_overlap = 0
 infill_wipe_dist = 0
 jerk_enabled = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
index 70c710da88..a95e3ca53b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -14,7 +14,7 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 80
 cool_min_speed = 6
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
+
 infill_overlap = 0
 infill_wipe_dist = 0
 jerk_enabled = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
index 0c5d20e570..ef67add796 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -14,7 +14,7 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 50
 cool_min_speed = 5
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
+
 infill_overlap = 0
 infill_wipe_dist = 0
 jerk_enabled = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
index ab8735ca06..6f8cc41f26 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -14,7 +14,7 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 50
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
+
 infill_overlap = 0
 infill_wipe_dist = 0
 jerk_enabled = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
index 69dc6993da..11274b2f0d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -15,8 +15,8 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
+
+
 material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
@@ -33,7 +33,7 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
+
 
 jerk_travel = 50
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
index df6754b065..626d56d1b2 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -15,8 +15,8 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
+
+
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
@@ -33,7 +33,7 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
+
 
 jerk_travel = 50
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
index c09ee2a95a..c3b3e14dc4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
@@ -15,8 +15,8 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 15
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
+
+
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
@@ -32,7 +32,7 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
+
 
 jerk_travel = 50
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
index dc0c34c7b2..59eadf035b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -15,8 +15,8 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
+
+
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
@@ -32,7 +32,7 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
+
 
 jerk_travel = 50
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
index 7a4894f065..adf6786e83 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 90
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 6
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 infill_overlap = 0
 infill_overlap_mm = 0.05
 infill_pattern = triangles
@@ -57,5 +57,5 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
index 460672ac0f..5ae2735f2d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 85
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 infill_overlap_mm = 0.05
 infill_pattern = triangles
 infill_wipe_dist = 0.1
@@ -57,5 +57,5 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
index 77b5bc8ee4..5085510594 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 8
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 infill_overlap = 0
 infill_overlap_mm = 0.05
 infill_pattern = triangles
@@ -58,5 +58,5 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
index 77f1c1659f..68c9a1bbec 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 infill_overlap = 0
 infill_pattern = triangles
 infill_wipe_dist = 0.1
@@ -56,5 +56,5 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
index 5045b5b0ab..e12e733e3d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
@@ -28,7 +28,7 @@ top_bottom_thickness = 0.8
 wall_thickness = 0.8
 
 jerk_travel = 50
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+
 infill_sparse_density = 15
 layer_height_0 = 0.2
 acceleration_wall = 2000
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
index 0cc2754a69..2c2a2b39a7 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
@@ -27,7 +27,7 @@ top_bottom_thickness = 1
 wall_thickness = 1
 
 jerk_travel = 50
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+
 layer_height_0 = 0.2
 
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
index 0d60d544a6..c5ea2e1400 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
@@ -29,7 +29,7 @@ top_bottom_thickness = 1
 wall_thickness = 1
 
 jerk_travel = 50
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+
 layer_height_0 = 0.2
 
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
index daa75b8dd0..9636a55c61 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -25,7 +25,7 @@ top_bottom_thickness = 1
 wall_thickness = 1
 
 jerk_travel = 50
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+
 layer_height_0 = 0.2
 
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
index 20eb2c084b..6142412e33 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
@@ -17,13 +17,12 @@ cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
@@ -55,5 +54,5 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
index 1e2927b94a..e29f83ed8e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
@@ -17,13 +17,11 @@ cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
@@ -57,5 +55,5 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
index 62d45c44ed..cd8db42a37 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -17,13 +17,13 @@ cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
+
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
@@ -57,5 +57,5 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
index 39fe086b64..efd14ee639 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.4
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.45/0.35,2)
 jerk_print = 25
 jerk_roofing = 1
 layer_height_0 = 0.2
@@ -34,5 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 36 / 50)
 speed_wall_0 = =math.ceil(speed_print * 26 / 50)
 top_bottom_thickness = 1.2
-wall_line_width_x = =round(line_width * 0.35/0.35,2)
+
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
index 58c582e061..deffe82cd0 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.4
 [values]
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
-infill_line_width = =round(line_width * 1.285, 2)
 layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
@@ -27,5 +26,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 top_bottom_thickness = 1.2
-wall_line_width_x = =round(line_width * 0.35/0.35,2)
+
 wall_thickness = 1.23
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
index 6b67046216..7512adc068 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
@@ -31,6 +31,3 @@ wall_thickness = 1.23
 
 layer_height_0 = 0.2
 
-line_width = =round(machine_nozzle_size * 1.025, 3)
-wall_line_width_x = =line_width
-infill_line_width = =line_width
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
index ba051c3da0..0c9d86f51f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.4
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
-infill_line_width = =round(line_width * 1.285, 2)
 layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
index 585e77b07f..b985c97b11 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -17,14 +17,14 @@ cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = cross_3d
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
+
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
@@ -56,5 +56,5 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = 0.76
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
index 0edd73415c..03a7c8fae4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -17,14 +17,14 @@ cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = cross_3d
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
+
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
@@ -56,6 +56,6 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = 0.76
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
index 83cfa8b4f7..482fc42161 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -17,14 +17,14 @@ cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = cross_3d
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
+
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
@@ -55,6 +55,6 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = 0.76
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg
index 8cae3917a2..83307b3989 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg
@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.8
 
 [values]
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 20
 material_standby_temperature = 100
 speed_print = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg
index 4114848e22..597a7bb4fe 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg
@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.8
 
 [values]
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 25
 material_standby_temperature = 100
 speed_print = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg
index 0680929256..0fee66e2e4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg
@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.8
 
 [values]
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 22
 material_standby_temperature = 100
 speed_print = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
index 0dd0a53eb0..a3c1641407 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
@@ -16,7 +16,7 @@ is_experimental = True
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 
-line_width = =machine_nozzle_size * 0.9375
+
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 10
@@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
index 1b1e52033b..340c20d968 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -16,7 +16,7 @@ is_experimental = True
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
 
-line_width = =machine_nozzle_size * 0.9375
+
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 5
@@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
index 3dd94709ee..d064920dcf 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -16,7 +16,7 @@ is_experimental = True
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 
-line_width = =machine_nozzle_size * 0.9375
+
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 7
@@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg
index a1533ea905..3cb350975c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 15
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 15
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
index 246ef4cc63..91bce0f11b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 15
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 20
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg
index d9259fdecc..0cf188093b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 15
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 17
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
index 9a98be3135..a0c3386e76 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 
-infill_line_width = =line_width
+
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
@@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
index 3f0b9e0e06..687e9f371f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 
-infill_line_width = =line_width
+
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
@@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
index 1f43d241d3..06c806d85b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 
-infill_line_width = =line_width
+
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
@@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg
index 6bdb14bdf5..f291ab075a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg
@@ -16,7 +16,7 @@ is_experimental = True
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
 material_standby_temperature = 100
@@ -29,4 +29,3 @@ speed_slowdown_layers = 15
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
index c3af9333f1..313d31e1a3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
@@ -16,7 +16,7 @@ is_experimental = True
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
 
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature_layer_0 = =material_print_temperature
 material_standby_temperature = 100
 raft_airgap = 0.5
@@ -28,4 +28,3 @@ speed_slowdown_layers = 8
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
index b529b956ec..7bf8768c6d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
@@ -16,7 +16,7 @@ is_experimental = True
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
 material_standby_temperature = 100
@@ -29,4 +29,3 @@ speed_slowdown_layers = 10
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
index 8f6026e176..4b66d6fdaf 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 7
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
index fab71760d3..7a2c5261e1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 7
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
index cbb178b2dd..190f74524b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 7
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg
index 9e1dff0827..30fd5c9eca 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg
@@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -25,13 +23,9 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature -
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
-
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
index 42d3a435c5..47e921703b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
@@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -26,11 +24,8 @@ material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = True
 raft_margin = 10
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
index 95035c6996..e9f282c87e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
@@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -25,11 +23,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature -
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
index d7d5ff32bf..2a37bcb466 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
@@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
 
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
 jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -36,16 +36,12 @@ retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
 wall_thickness = 1.6
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
index 19bf973154..15c6de5603 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
 
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
 jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -36,16 +36,12 @@ retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
 wall_thickness = 1.6
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
index a5c6902c9f..a035d08418 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
 
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
 jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -35,16 +35,12 @@ retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
 wall_thickness = 1.6
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
index a5eac8aaa8..26585acf60 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
@@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.75 / 0.75, 2)
 infill_pattern = cubic
 layer_height_0 = 0.4
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -32,9 +30,6 @@ speed_topbottom = =round(speed_print * 35 / 45)
 speed_wall = =round(speed_print * 40 / 45)
 speed_wall_0 = =round(speed_print * 35 / 45)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 6
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
index 52df4bed2c..32eb10ae89 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
@@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.75 / 0.75, 2)
 infill_pattern = cubic
 layer_height_0 = 0.4
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,8 +32,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 25/ 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
index 11230abb5a..d92ee73bb1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
@@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.75 / 0.75, 2)
 infill_pattern = cubic
 layer_height_0 = 0.4
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -35,9 +33,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35)
 speed_wall = =math.ceil(speed_print * 25/ 35)
 speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
index 023851dded..a2752126a4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -15,8 +15,6 @@ variant = AA 0.8
 brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
-
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
 jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -39,15 +37,12 @@ retraction_hop = 1.5
 retraction_hop_only_when_collides = False
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 25 / 30)
-
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
@@ -55,7 +50,5 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
 wall_thickness = 1.3
-
 jerk_travel = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
index 82fa45fbd3..bff82d1c3b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
 
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+
 infill_pattern = cross_3d
 infill_sparse_density = 10
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -40,15 +40,12 @@ retraction_hop = 1.5
 retraction_hop_only_when_collides = False
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
-
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
@@ -56,6 +53,5 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
 wall_thickness = 1.3
 jerk_travel = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
index dfed86dfa0..7471e5031e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
 
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+
 infill_pattern = cross_3d
 infill_sparse_density = 10
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -39,15 +39,12 @@ retraction_hop = 1.5
 retraction_hop_only_when_collides = False
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 23 / 30)
-
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
@@ -55,6 +52,5 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
 wall_thickness = 1.3
 jerk_travel = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
index 0778af5eeb..db9f7a118e 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
index 0231e933f5..a4270f7c79 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
index c51fab4ee3..a675beb61e 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
index a6e0bd1744..e9003721ec 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
index c77bdd9ebf..7f692d8a8c 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
index 835d86ea59..26a2e6fae4 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
index 001959a334..4b63017464 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
index 7a055b6e29..58076ba6e9 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
index be856977a8..ed376310c0 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
 infill_pattern = triangles
-line_width = =machine_nozzle_size
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
index fe6a05e98a..69d0d5274b 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
 infill_pattern = triangles
-line_width = =machine_nozzle_size 
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
index 2ee202a68a..07d37ef967 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size * (0.58/0.6)
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +26,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
index 073d07dbef..969da49a51 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size * (0.58/0.6)
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +26,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
index 3f1fd4c34e..bc65773a45 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size * (0.58/0.6)
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +26,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
index 3d3e746d63..8ed2e7fb96 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size * (0.58/0.6)
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +26,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
index d993a5ae22..cb8264338f 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
 infill_pattern = triangles
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
index 008ecc21e3..3bde0b6e99 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
 infill_pattern = triangles
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x