diff options
author | Rijk van Manen <r.vanmanen@ultimaker.com> | 2022-06-01 16:18:25 +0300 |
---|---|---|
committer | Rijk van Manen <r.vanmanen@ultimaker.com> | 2022-06-01 16:18:25 +0300 |
commit | 0779cbbbdd1a9b58a1ead516f8fcc9ff71c4f453 (patch) | |
tree | b825dc942da4464110f79cef6f011e53a79eb97e /resources/quality/ultimaker_s3 | |
parent | 3a2a58f54650c613505c5cb89f483273522bd30a (diff) |
set material specific settingsPP-170-clean-up-retraction_count_max
TPU, PP and PVA have a lower retraction count then default. PP-170
Diffstat (limited to 'resources/quality/ultimaker_s3')
21 files changed, 21 insertions, 20 deletions
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index d0668b64f6..4fd18781f5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -31,9 +31,8 @@ multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_count_max = 6 +retraction_count_max = 15 retraction_extra_prime_amount = 0.2 -retraction_extrusion_window = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index 75eba5b995..267c57c21a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -36,9 +36,8 @@ multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index fdf769ed38..1cc6ff8595 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -35,9 +35,8 @@ multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index 821e1f4840..49754af9e7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -37,9 +37,8 @@ multiple_mesh_overlap = 0 prime_tower_enable = False prime_tower_size = 16 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index 566f474dc4..09bb37312d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15 material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index e968507192..baf8608604 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15 material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index ca8410766a..c0445e739c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -35,9 +35,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 17 material_standby_temperature = 100 multiple_mesh_overlap = 0 prime_tower_wipe_enabled = True -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.8 -retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 skin_line_width = =round(line_width / 0.8, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index 4572e3fabc..14a7451bcc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 10 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index 596f34d7b9..c466b76c1c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -26,7 +26,7 @@ prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 20 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index 4f1a91337a..804149a584 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -25,7 +25,7 @@ prime_tower_enable = True prime_tower_flow = 100 prime_tower_min_volume = 15 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index dc4858e463..ab71a4c37e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index d2e23c81a9..ac2181d373 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -29,7 +29,7 @@ multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index 3d4076c08c..e4bb128599 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 retract_at_layer_change = False -retraction_count_max = 12 +retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg index afb19f1769..94802d49fc 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg @@ -16,5 +16,6 @@ brim_replaces_support = False material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 skin_overlap = 20 support_brim_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg index 6b1cef8991..bafe3e88d6 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg @@ -16,6 +16,7 @@ brim_replaces_support = False material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 skin_overlap = 15 support_brim_enable = True support_infill_sparse_thickness = 0.3 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg index 0a9a37ca05..c1b9556636 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg @@ -15,5 +15,6 @@ variant = BB 0.4 brim_replaces_support = False material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 support_brim_enable = True support_infill_sparse_thickness = 0.18 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg index a899959d98..0a4e11c158 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -15,4 +15,5 @@ variant = BB 0.4 brim_replaces_support = False material_standby_temperature = 100 prime_tower_enable = False +retraction_count_max = 5 support_brim_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg index 0cd6094bbc..8bd0e5d375 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg @@ -15,6 +15,7 @@ is_experimental = True [values] brim_replaces_support = False material_standby_temperature = 100 +retraction_count_max = 5 support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_height = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg index 388ebeff72..587b7b29cd 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg @@ -15,4 +15,5 @@ variant = BB 0.8 brim_replaces_support = False material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 +retraction_count_max = 5 support_brim_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg index e9030819ea..c1cbac87a0 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -14,5 +14,6 @@ variant = BB 0.8 [values] brim_replaces_support = False material_standby_temperature = 100 +retraction_count_max = 5 support_brim_enable = True support_interface_height = 0.9 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg index c35737bb97..b5e22bef62 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -14,6 +14,7 @@ variant = BB 0.8 [values] brim_replaces_support = False material_standby_temperature = 100 +retraction_count_max = 5 support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_height = 1.2 |