diff options
author | Rijk van Manen <r.vanmanen@ultimaker.com> | 2022-04-04 15:29:40 +0300 |
---|---|---|
committer | Rijk van Manen <r.vanmanen@ultimaker.com> | 2022-04-04 15:29:40 +0300 |
commit | 44a33e0fed47571292612c3edbe23abb90f01ed1 (patch) | |
tree | 1bc7f59625d6a873c0aa0f49d27a5f5645d08400 /resources/quality/ultimaker_s3 | |
parent | df72cd8da48fabf864e3d4469d361748effc43e4 (diff) |
follow the defaults set in ultimaker.def.json
Only UM2+C keeps his on resolution settings, since this printer has a lower segments per second performance, and we are not going to work on it. PP-54
Diffstat (limited to 'resources/quality/ultimaker_s3')
19 files changed, 1 insertions, 45 deletions
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index 5fb23190d1..ba2af050fc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -34,8 +34,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - - -jerk_travel = 50 - raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index a46e184d05..1604c1a815 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -34,8 +34,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - - -jerk_travel = 50 - raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index 50d885b55f..7822926663 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -33,8 +33,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - - -jerk_travel = 50 - raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index 84aebaf798..bd8048528b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -33,8 +33,4 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 - - -jerk_travel = 50 - raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index a4b3fb3380..bbb6b61202 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -26,8 +26,6 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) top_bottom_thickness = 0.8 -jerk_travel = 50 - infill_sparse_density = 15 layer_height_0 = 0.2 acceleration_wall = 2000 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index 2f89be38f9..6b870c0af2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -25,8 +25,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) top_bottom_thickness = 1 -jerk_travel = 50 - layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index d80d8427c9..fbfca15254 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -27,8 +27,6 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 -jerk_travel = 50 - layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index 20025a8c0b..4262e22ac8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -23,8 +23,6 @@ retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = 10 top_bottom_thickness = 1 -jerk_travel = 50 - layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg index fd5e5a7217..7666860661 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] infill_sparse_density = 15 - -jerk_travel = 20 acceleration_print = 2000 acceleration_wall = 1500 acceleration_wall_0 = 1000 acceleration_topbottom = 1000 -acceleration_travel = 2000 - speed_print = 50 speed_wall = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg index 7a67e10783..6a7a43d808 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -14,14 +14,10 @@ is_experimental = True [values] infill_sparse_density = 15 - -jerk_travel = 20 acceleration_print = 2000 acceleration_wall = 1500 acceleration_wall_0 = 1000 acceleration_topbottom = 1000 -acceleration_travel = 2000 - speed_print = 50 speed_wall = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg index 9e293db418..7410ebd8d6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg @@ -21,5 +21,3 @@ retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) - -jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg index 0062aa89f8..ab407a7dcb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -22,5 +22,3 @@ speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - -jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg index 86e7b2465e..8b537d4df0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -21,5 +21,3 @@ retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) - -jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg index c34d5b281b..719fb8fce1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg @@ -21,6 +21,5 @@ retraction_combing_max_distance = 8 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) -jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg index 8940e53e23..8c57c89aa1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -22,6 +22,5 @@ speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -jerk_travel = 50 -cool_fan_speed = 20 +cool_fan_speed = 20 initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg index 56d72118c6..d00c906c2e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -21,7 +21,6 @@ retraction_combing_max_distance = 8 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) -jerk_travel = 50 cool_fan_speed = 20 layer_height_0 = 0.27 initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index bc3464b305..40beaf4b56 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index bbbc40dd0d..ea048cecfa 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -48,4 +48,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index 1eb27c3e9a..e682ba9664 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 -jerk_travel = 50 |