diff options
author | Rijk van Manen <r.vanmanen@ultimaker.com> | 2022-02-22 16:24:47 +0300 |
---|---|---|
committer | Rijk van Manen <r.vanmanen@ultimaker.com> | 2022-02-22 16:24:47 +0300 |
commit | 9b35dc18b55b283567de96adbe16100a4cc98e94 (patch) | |
tree | a2b1a18d0dc93e73770b614ef87b5080bb5a1f62 /resources/quality/ultimaker_s3 | |
parent | 5632d85339b5247e40426511880efe24dbb40229 (diff) |
material specific exceptions on the defaults
Some materials can handle higher unretract speeds. Also some unnecessary overwrites of the defaults are removed. PP-96
Diffstat (limited to 'resources/quality/ultimaker_s3')
35 files changed, 23 insertions, 13 deletions
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg index 08a82f1d5d..f3cc0937a0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg @@ -15,6 +15,5 @@ variant = AA 0.25 cool_fan_speed = 40 infill_overlap = =0 if infill_sparse_density > 80 else 15 material_final_print_temperature = =material_print_temperature - 5 -retraction_prime_speed = 25 speed_topbottom = =math.ceil(speed_print * 30 / 55) wall_thickness = 0.92 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index 47119e62bf..59423682f1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -34,7 +34,6 @@ retraction_count_max = 80 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index e426ee3efd..2f6c5f2888 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -37,7 +37,7 @@ retraction_extrusion_window = 6.5 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 13 +retraction_prime_speed = 15 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_travel_layer_0 = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg index d0e6e36ea3..1aad4c498f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -32,6 +32,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg index 51f90c6c8f..1172267ed4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -32,6 +32,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg index e5241c36c6..19b5094f03 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg @@ -34,6 +34,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg index 155001b888..a282ca7222 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -34,6 +34,7 @@ retraction_extrusion_window = 1 retraction_hop = 0.2 retraction_hop_enabled = False retraction_hop_only_when_collides = True +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg index 1a6ae612ce..7c42d02ada 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg @@ -16,6 +16,7 @@ material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_print = 60 speed_layer_0 = =math.ceil(speed_print * 20 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg index f0b55841f3..c5641afd64 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg @@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_print = 60 speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg index fdbe5fb1d6..a6ee66b17e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg @@ -19,6 +19,7 @@ material_print_temperature = =default_material_print_temperature - 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_print = 50 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg index 9bffd6f794..e888cf8ae0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -17,6 +17,7 @@ machine_nozzle_heat_up_speed = 1.5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 +retraction_prime_speed = =retraction_speed speed_print = 55 speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index 5bc7246093..5fb23190d1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index 614254e9d9..a46e184d05 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index 3a11b6dbe3..50d885b55f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index a5abd1bab6..84aebaf798 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_jerk = =jerk_layer_0 raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_prime_speed = =retraction_speed skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg index 69bbcf001d..f4bb4ba024 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -43,7 +43,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg index 63568363d2..ece85f2168 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -41,7 +41,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index 3a317c820e..0caf9b1cd6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -43,7 +43,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index 8b264ad751..751942b0f9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -41,7 +41,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 15 skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index 7ca3b04031..d5a5be70f8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -19,6 +19,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 40 / 70) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index 38741f40ff..d274eaffd3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -18,6 +18,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed speed_print = 70 speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index 871ab6adc8..2f54d272fe 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_print = 50 speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index 7c8b71cd68..2c23a4ae71 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -19,6 +19,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = 10 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg index 1f005ff77a..362d9ef5b9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0 skin_overlap = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index 816eaeda5d..b59e2537e3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -42,7 +42,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 18 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index 498bdd6bd5..3b3ff5b463 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -41,7 +41,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 18 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index 28b1470419..2530ca9490 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -43,7 +43,6 @@ retraction_extrusion_window = 1 retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 -retraction_prime_speed = 18 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg index 2201b135b1..a3d1d1f255 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -23,6 +23,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg index b97bdbece7..cb2d019fdc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature -10 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg index 262a1593a3..32ae7fbd53 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg @@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_print = 45 speed_layer_0 = =math.ceil(speed_print * 20 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg index c438fd2a93..a81a3b9f08 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -21,6 +21,7 @@ machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg index f00bf89dc6..bda8ad2775 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 prime_tower_enable = False +retraction_prime_speed = =retraction_speed skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0 skin_overlap = 20 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index 0a01d45a0c..8b0b8abf0c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 -retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index 18c5c014f8..0f4a416273 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 -retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index 536f766916..2b0b1c1720 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -40,7 +40,6 @@ retraction_extra_prime_amount = 0.8 retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 -retraction_prime_speed = 15 skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_layer_0 = =math.ceil(speed_print * 18 / 25) |