remove all wall_thickness statements

All print profiles are following the global rules, no print profile specific exceptions. PP-115

51 files changed, 0 insertions, 79 deletions

diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg
index f3cc0937a0..777dc63222 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg
@@ -16,4 +16,3 @@ cool_fan_speed = 40
 infill_overlap = =0 if infill_sparse_density > 80 else 15
 material_final_print_temperature = =material_print_temperature - 5
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
-wall_thickness = 0.92
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg
index fc2ae7e17f..1d62998c14 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg
@@ -17,4 +17,3 @@ retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
-wall_thickness = 0.92
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
index 59423682f1..e39774bf16 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -47,4 +47,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
index 34fa0d7c84..f65f3b2043 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
-wall_thickness = 0.92
 initial_layer_line_width_factor = 100
 
 material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg
index 5f51f32b6a..74350d9509 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg
@@ -33,4 +33,3 @@ top_bottom_thickness = 0.72
 travel_avoid_distance = 0.4
 wall_0_inset = 0.015
 wall_0_wipe_dist = 0.25
-wall_thickness = 0.7
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
index 2f6c5f2888..7b335ddd02 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
@@ -50,4 +50,3 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg
index 447d0412aa..faf54f8f77 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg
@@ -32,5 +32,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 top_bottom_thickness = 0.72
 wall_0_inset = 0.015
 wall_0_wipe_dist = 0.25
-wall_thickness = 0.7
-
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
index 9644732c0c..69ee9155fc 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
@@ -24,9 +24,6 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-wall_thickness = 1
-
-
 speed_infill = =math.ceil(speed_print * 50 / 60)
 
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg
index 4d33d3f8e2..79d9d27df7 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg
@@ -26,7 +26,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 top_bottom_thickness = 1
-wall_thickness = 1
 support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg
index a803e13f20..d9153d20b1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg
@@ -25,7 +25,6 @@ speed_topbottom = =math.ceil(speed_print * 30 / 80)
 speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 top_bottom_thickness = 1
-wall_thickness = 1
 support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg
index b3ef4abe94..2d7f889236 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg
@@ -35,4 +35,3 @@ support_offset = 2
 support_pattern = triangles
 support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
 top_bottom_thickness = 1
-wall_thickness = 1
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg
index 757743c70b..c732cb2deb 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg
@@ -26,7 +26,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 top_bottom_thickness = 1
-wall_thickness = 1
 support_brim_enable = True
 support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
index 1aad4c498f..78e6cee580 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -43,5 +43,3 @@ speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
 support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
-wall_thickness = 1
-
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg
index 7c42d02ada..8b4cdca8f1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg
@@ -23,8 +23,6 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-wall_thickness = 1
-
 
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 speed_infill = =math.ceil(speed_print * 50 / 60)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
index f4bb4ba024..71ae63c975 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@@ -56,5 +56,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-
-wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
index ece85f2168..37a0599ee7 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@@ -55,5 +55,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-
-wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
index 0caf9b1cd6..363a8ab0b7 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@@ -57,5 +57,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-
-wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
index 751942b0f9..81b352fe8c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -55,5 +55,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-
-wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg
index bff77a1390..0fd77e24b3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg
@@ -22,8 +22,6 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-wall_thickness = 1
-
 
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 speed_infill = =math.ceil(speed_print * 50 / 60)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
index d5a5be70f8..a4b3fb3380 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
@@ -26,8 +26,6 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70)
 speed_wall = =math.ceil(speed_print * 55 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
 top_bottom_thickness = 0.8
-wall_thickness = 0.8
-
 jerk_travel = 50
 
 infill_sparse_density = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
index d274eaffd3..2f89be38f9 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
@@ -25,8 +25,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 70)
 top_bottom_thickness = 1
-wall_thickness = 1
-
 jerk_travel = 50
 
 layer_height_0 = 0.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
index 2f54d272fe..d80d8427c9 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
@@ -27,8 +27,6 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 35 / 50)
 top_bottom_thickness = 1
-wall_thickness = 1
-
 jerk_travel = 50
 
 layer_height_0 = 0.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
index 2c23a4ae71..20025a8c0b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -23,8 +23,6 @@ retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = 10
 top_bottom_thickness = 1
-wall_thickness = 1
-
 jerk_travel = 50
 
 layer_height_0 = 0.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
index 362d9ef5b9..fd5e5a7217 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
@@ -37,8 +37,6 @@ prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20
-
-wall_thickness = =line_width * 3
 top_bottom_thickness = 0.9
 
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
index b59e2537e3..66aed15373 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
@@ -53,5 +53,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-
-wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
index 3b3ff5b463..a600281dc4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
@@ -54,5 +54,3 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 wall_0_inset = 0
-
-wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
index 2530ca9490..37a9293976 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -56,5 +56,3 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 wall_0_inset = 0
-
-wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
index a3d1d1f255..d212ce86e6 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
@@ -32,5 +32,3 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 36 / 50)
 speed_wall_0 = =math.ceil(speed_print * 26 / 50)
 top_bottom_thickness = 1.2
-
-wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
index cb2d019fdc..9cf21612a2 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
@@ -27,5 +27,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 top_bottom_thickness = 1.2
-
-wall_thickness = 1.23
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
index 32ae7fbd53..14dcd79a29 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
@@ -28,7 +28,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 top_bottom_thickness = 1.2
-wall_thickness = 1.23
-
 layer_height_0 = 0.2
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
index a81a3b9f08..126cf13670 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
@@ -29,5 +29,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 top_bottom_thickness = 1.2
-wall_thickness = 1.23
-
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
index bda8ad2775..7a67e10783 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
@@ -37,8 +37,6 @@ prime_tower_enable = False
 retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20
-
-wall_thickness = =line_width * 3
 top_bottom_thickness = 1.2
 
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
index 8b0b8abf0c..b20cc2eaef 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -55,5 +55,3 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-
-wall_thickness = 0.76
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
index 0f4a416273..849763dd0d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -55,6 +55,3 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-
-wall_thickness = 0.76
-
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
index 2b0b1c1720..5b2d81f30e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -54,6 +54,3 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-
-wall_thickness = 0.76
-
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg
index 279e4f4beb..ab1d37a0ed 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg
@@ -25,7 +25,6 @@ prime_tower_enable = True
 support_angle = 70
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_thickness = =wall_line_width_0 + wall_line_width_x
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
index 9c6ec154fe..01bec374a6 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
@@ -26,7 +26,6 @@ raft_margin = 10
 support_angle = 70
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_thickness = =wall_line_width_0 + wall_line_width_x
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
index 6ef378376d..86734f57a5 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
@@ -25,7 +25,6 @@ prime_tower_enable = True
 support_angle = 70
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_thickness = =wall_line_width_0 + wall_line_width_x
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
index 0350a1836f..4ae29a2e78 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
@@ -39,4 +39,3 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 wall_0_wipe_dist = =line_width * 2
-wall_thickness = 1.6
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
index cfe751f38b..690ae20b68 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -39,4 +39,3 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 wall_0_wipe_dist = =line_width * 2
-wall_thickness = 1.6
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
index 58a7cea554..ed4ca081cb 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -38,4 +38,3 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 wall_0_wipe_dist = =line_width * 2
-wall_thickness = 1.6
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
index 91e9ac5632..d8f7e4e236 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
@@ -32,4 +32,3 @@ speed_wall_0 = =round(speed_print * 35 / 45)
 support_angle = 70
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 6
-wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
index db12dff2f0..f9a23df7dc 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
@@ -34,4 +34,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 support_angle = 70
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
index a97439f98c..31d43d6d1a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
@@ -35,4 +35,3 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 support_angle = 70
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
index 47cb0623eb..bc3464b305 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -47,5 +47,4 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-wall_thickness = 1.3
 jerk_travel = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
index 1155e46024..bbbc40dd0d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -48,5 +48,4 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-wall_thickness = 1.3
 jerk_travel = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
index ab5562474d..1eb27c3e9a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -47,5 +47,4 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-wall_thickness = 1.3
 jerk_travel = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
index c354eea9e3..6ce68aea6b 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
@@ -35,4 +35,3 @@ support_angle = 70
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
index a0778a7f88..a6cc519d08 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
@@ -35,4 +35,3 @@ support_angle = 70
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
index c78b060dee..7c660d8d67 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
@@ -35,4 +35,3 @@ support_angle = 70
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
index 031db016b6..7cb6a071fb 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
@@ -35,4 +35,3 @@ support_angle = 70
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_thickness = =wall_line_width_0 + wall_line_width_x