Updates Jerk settings to a minimum of 20mmps

For PP-1

6 files changed, 18 insertions, 27 deletions

diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
index 1d30f3b80d..11a00e7466 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
@@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20)
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
@@ -37,7 +37,6 @@ retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.7 / 0.8, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
index 5c6247bad8..2f1d841329 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20)
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = =default_material_print_temperature + 2
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
@@ -37,7 +37,6 @@ retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.7 / 0.8, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
index 9df8d24ede..cc6c666d45 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20)
 material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature + 2
 material_standby_temperature = 100
@@ -36,7 +36,6 @@ retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
-
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
 support_line_width = =round(line_width * 0.7 / 0.8, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
index 0bdf141bbd..3592e721d7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
@@ -18,9 +18,9 @@ top_skin_expand_distance = =line_width * 2
 infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature
@@ -42,7 +42,6 @@ retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 25 / 30)
-
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
@@ -57,5 +56,4 @@ travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
 wall_thickness = 1.3
-
 jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index 4fc076ea74..460dd06716 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -19,9 +19,9 @@ infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature
@@ -43,7 +43,6 @@ retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
-
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
@@ -58,5 +57,4 @@ travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
 wall_thickness = 1.3
-
 jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
index 603e3ffb14..49aef7edde 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -19,9 +19,9 @@ infill_before_walls = True
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10
-jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
-jerk_support = =math.ceil(jerk_print * 25 / 25)
-jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
+jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20)
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
 material_final_print_temperature = =material_print_temperature
@@ -42,7 +42,6 @@ retraction_prime_speed = 15
 skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 23 / 30)
-
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
@@ -57,5 +56,4 @@ travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
 wall_thickness = 1.3
-
 jerk_travel = 50