diff options
author | Ghostkeeper <rubend@tutanota.com> | 2021-12-14 13:48:58 +0300 |
---|---|---|
committer | Ghostkeeper <rubend@tutanota.com> | 2021-12-14 13:48:58 +0300 |
commit | 9140b71b1998d75d51ae556bbb63059de6016c9c (patch) | |
tree | 6bc49869a84820770d325d5c0300ed9f1e42bdec /resources/quality/ultimaker_s5 | |
parent | 64dec9ecc10eb81b68aecc4dcf586e80c03dec01 (diff) | |
parent | 2000f8143a1392ea1d198b485ba17e84dba33594 (diff) |
Merge branch 'libArachne_rebased'
Conflicts:
plugins/SimulationView/SimulationPass.py -> Reverted layer view optimisation in Master while some whitespace changed in Arachne.
resources/definitions -> Bunch of conflicts with profile updates.
resources/quality -> Bunch of conflicts with profile updates.
resources/texts/change_log.txt -> Removed the Arachne change log (as they are internal versions). It'll have to be re-added when we release this version as stable.
Diffstat (limited to 'resources/quality/ultimaker_s5')
81 files changed, 101 insertions, 286 deletions
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg index a751c7a58d..a4a5945c91 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -14,7 +14,7 @@ variant = AA 0.25 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 @@ -32,4 +32,4 @@ speed_wall = =math.ceil(speed_print * 30 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index 9559e510c3..ee3750680f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -13,15 +13,12 @@ variant = AA 0.25 is_experimental = True [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =line_width infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 jerk_enabled = True @@ -51,5 +48,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg index 335f1746dc..d81ae5f88e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg @@ -19,5 +19,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 wall_thickness = 0.92 initial_layer_line_width_factor = 100 -infill_before_walls = true + material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index 70dadbcd4d..07aa9462e1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -13,18 +13,14 @@ variant = AA 0.25 is_experimental = True [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 10 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.92 machine_min_cool_heat_time_window = 15 material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_final_print_temperature = =material_print_temperature - 10 @@ -42,7 +38,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 13 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_travel_layer_0 = 50 @@ -55,5 +50,4 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 -wall_line_width_x = =line_width wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg index f767f93e56..e4aa517abb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -15,10 +15,8 @@ variant = AA 0.25 brim_width = 8 cool_fan_full_at_height = =layer_height_0 cool_min_speed = 7 -infill_line_width = =line_width infill_overlap = =0 if infill_sparse_density > 80 else 10 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid' -line_width = =machine_nozzle_size * 0.92 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,7 +32,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30) top_bottom_thickness = 0.72 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 -wall_line_width = =line_width -wall_line_width_x= =line_width wall_thickness = 0.7 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg index fe204e4b36..d6ef41abe1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg @@ -25,8 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) wall_thickness = 1 - -infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 50 / 60) - raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg index a3ab1e4454..e5ed77862a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg @@ -24,8 +24,5 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - -infill_line_width = =round(line_width * 0.4 / 0.35, 2) speed_infill = =math.ceil(speed_print * 45 / 60) - raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg index 582b6577e9..73d1ad25d4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg @@ -24,7 +24,7 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 40 / 50) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg index 396a6f6046..bb8f9c5bb9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg @@ -23,6 +23,6 @@ speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + speed_infill = =math.ceil(speed_print * 40 / 55) raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg index 88a9b174f2..f6927953d1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 80 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg index 8b080cc8a7..ffb22e619d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg @@ -12,11 +12,9 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 80 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg index feebe6c54b..262e6583a2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg @@ -12,11 +12,9 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 50 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) + infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg index 2ab011d608..a11519fb05 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -12,11 +12,8 @@ material = generic_cpe_plus variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 cool_fan_speed_max = 50 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.35 / 0.35, 2) infill_overlap = 0 infill_wipe_dist = 0 jerk_enabled = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index d1f0d4faf4..9a02eeede4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size material_print_temperature = =default_material_print_temperature + 10 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,7 +31,5 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width - jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index 766829df65..01859d49a1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_print_temperature = =default_material_print_temperature + 5 material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 @@ -33,7 +33,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index 24a6d8390b..c25a46ce20 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 15 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,7 +32,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index 80fbfa1a1d..321c369975 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.4 adhesion_type = brim cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -infill_line_width = =round(line_width * 0.5 / 0.4, 2) -line_width = =machine_nozzle_size + + material_initial_print_temperature = =material_print_temperature - 5 material_final_print_temperature = =material_print_temperature - 10 material_standby_temperature = 100 @@ -32,7 +32,7 @@ speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 -wall_line_width_x = =wall_line_width + jerk_travel = 50 raft_surface_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg index fe2d64d58a..2fdc113b3c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg @@ -12,15 +12,12 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 90 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 6 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) infill_overlap = 0 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' @@ -59,5 +56,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index 4e0a2d3e9a..9adceaa9cd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -12,15 +12,12 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 85 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 7 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 @@ -59,5 +56,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg index 5595008d1e..65364d955a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' @@ -60,5 +58,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg index 235dd1d577..e6adcfaf22 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg @@ -12,15 +12,13 @@ material = generic_pc variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 adhesion_type = brim brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 -infill_line_width = =round(line_width * 0.4 / 0.35, 2) + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 @@ -58,5 +56,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index 3869313801..fcc7ce6278 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -29,7 +29,7 @@ top_bottom_thickness = 0.8 wall_thickness = 0.8 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + infill_sparse_density = 15 layer_height_0 = 0.2 acceleration_wall = 2000 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index b90ace8ace..27df25d5d5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -27,6 +27,6 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index 4928021740..9df48afa7b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -29,6 +29,6 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index a06fd6ecca..b3d096ed71 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -25,6 +25,6 @@ top_bottom_thickness = 1 wall_thickness = 1 jerk_travel = 50 -infill_line_width = =round(line_width * 0.42 / 0.35, 2) + layer_height_0 = 0.2 raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index 1e5dfad31e..3acfe41222 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -12,20 +12,18 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -46,7 +44,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) @@ -58,5 +55,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index abdbb57f1e..4f7e5c5860 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -12,20 +12,18 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -46,7 +44,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) @@ -60,5 +57,5 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1.1 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index 099cdef747..b2b03b494d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -12,20 +12,18 @@ material = generic_pp variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 20 cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 @@ -46,7 +44,6 @@ retraction_hop = 2 retraction_hop_only_when_collides = True retraction_min_travel = 0.8 retraction_prime_speed = 18 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) @@ -60,5 +57,5 @@ switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 35 top_bottom_thickness = 1 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg index d5a69fd393..94be77a109 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 0.45/0.35,2) jerk_print = 25 jerk_roofing = 1 layer_height_0 = 0.2 @@ -33,5 +32,5 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 36 / 50) speed_wall_0 = =math.ceil(speed_print * 26 / 50) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) + wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg index b7df7b81b2..e66b376515 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg @@ -14,7 +14,6 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 @@ -27,5 +26,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 -wall_line_width_x = =round(line_width * 0.35/0.35,2) + wall_thickness = 1.23 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index 3301bd2a52..cb9e545007 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -28,9 +28,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 wall_thickness = 1.23 - layer_height_0 = 0.2 - -line_width = =round(machine_nozzle_size * 1.025, 3) -wall_line_width_x = =line_width -infill_line_width = =line_width diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg index ff21b4cc75..405fd35825 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -15,7 +15,6 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -infill_line_width = =round(line_width * 1.285, 2) layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 79f3a1b769..5c4734a32a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -12,21 +12,19 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -45,7 +43,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) @@ -59,5 +56,5 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index 7bce192f75..62c40c1b18 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -12,21 +12,19 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -45,7 +43,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) @@ -59,6 +56,6 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 056871cfa9..018b755036 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -12,21 +12,19 @@ material = generic_tpu variant = AA 0.4 [values] -acceleration_enabled = True -acceleration_print = 4000 brim_width = 8.75 cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height -infill_line_width = =round(line_width * 0.38 / 0.38, 2) + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 infill_wipe_dist = 0.1 jerk_enabled = True jerk_print = 25 -line_width = =machine_nozzle_size * 0.95 + machine_min_cool_heat_time_window = 15 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -44,7 +42,6 @@ retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 -speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) @@ -58,6 +55,6 @@ switch_extruder_retraction_speeds = 35 top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 -wall_line_width_x = =line_width + wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg index 5a3b6978d6..01d7e53670 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg index 1734f808b1..96b7e79ad5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 25 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg index aa4997489a..d7a7a85eeb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -12,7 +12,7 @@ material = generic_abs variant = AA 0.8 [values] -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 22 material_standby_temperature = 100 speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg index 77880f2e2a..36145680b5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg @@ -15,8 +15,7 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.9375 + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 @@ -34,6 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index 2e9ab45f9a..d31ca4ffbe 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.9375 + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 @@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg index 801469f563..5770d4057c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.9375 + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 @@ -34,6 +34,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.6 / 0.7, 2) + support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg index a917cfa5c5..f7dbe85c00 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg index 4d5d7a8f7c..07e19b9ca3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg index 35ba606771..350c99833c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature + 17 material_standby_temperature = 100 prime_tower_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg index b9109fc19e..467eec435c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg index 51108615c4..4d307200d4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg index ceae874f6a..de5699b976 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -15,8 +15,8 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -infill_before_walls = True -infill_line_width = =line_width + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 @@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) raft_margin = 10 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg index 12e7c5bb32..57d0f13aca 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.875 + + material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +29,4 @@ speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index de971b9bd5..1ee17fd498 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -15,8 +15,8 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.875 + + material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 raft_airgap = 0.5 @@ -28,4 +28,4 @@ speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg index eba73f4bae..be23988e50 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg @@ -15,8 +15,6 @@ is_experimental = True [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height -infill_before_walls = True -line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature material_standby_temperature = 100 @@ -29,4 +27,3 @@ speed_slowdown_layers = 10 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg index 553ceeebc6..762b2ebca8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True @@ -24,4 +24,3 @@ speed_wall = =math.ceil(speed_print * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg index a4fb2106fd..855a5ae292 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True @@ -25,4 +25,4 @@ speed_wall_0 = =math.ceil(speed_wall * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg index 3f143f88bc..8b688debf0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -13,7 +13,7 @@ variant = AA 0.8 [values] brim_width = 7 -line_width = =machine_nozzle_size * 0.875 + material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 prime_tower_enable = True @@ -24,4 +24,4 @@ speed_wall = =math.ceil(speed_print * 30 / 40) jerk_travel = 50 cool_fan_speed = 20 initial_layer_line_width_factor = 100 -infill_before_walls = true + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg index a56d25544c..495f18dc4a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -25,13 +23,9 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x - retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index f5ee003217..814c7a2b5e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -26,11 +24,8 @@ material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True raft_margin = 10 support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg index 89d05725e8..bf341d3bf0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -25,11 +23,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature - material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg index 64c94a74bd..2042e29518 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg @@ -16,8 +16,6 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 @@ -33,17 +31,12 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 -travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index f40280a355..f0b09c333d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,8 +16,6 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 @@ -33,17 +31,12 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 -travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg index d2b380fc97..9cb6b43d70 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg @@ -16,8 +16,6 @@ brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -32,17 +30,12 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 -travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg index c9a856dde8..6f02b91def 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -32,9 +30,6 @@ speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) speed_wall_0 = =round(speed_print * 35 / 45) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 6 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg index 00367c0b28..818e9130e5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,8 +32,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =math.ceil(speed_print * 25/ 30) speed_wall_0 = =math.ceil(speed_print * 20 / 30) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg index 88074eea54..b5d32d020c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.75 / 0.75, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' layer_height_0 = 0.4 -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -35,9 +33,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) speed_wall_0 = =math.ceil(speed_print * 20 / 35) support_angle = 70 -support_line_width = =line_width * 0.75 support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index c7ccc9a2a0..d89919328e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -36,24 +34,18 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 -travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 3d3bc26a5b..a400721d90 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 machine_nozzle_cool_down_speed = 0.5 @@ -37,24 +35,18 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 -travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index f6979ef1c7..19842185fe 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -15,8 +15,6 @@ variant = AA 0.8 brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 -infill_before_walls = True -infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 machine_nozzle_cool_down_speed = 0.5 @@ -36,24 +34,18 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance -support_line_width = =round(line_width * 0.7 / 0.8, 2) support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 -travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 -wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg index 049fc9c94b..d685b0686e 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg index 9d83f4a959..1d096fdfd2 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg index 7df168e3d2..e55f7b8e62 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg index 3b740c7e74..2aac3f8e40 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg index ad819a0251..b84b684382 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg index e6cb3461b6..3244681911 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg index 1b885a0884..6002ab3ac8 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg index 7409b2e9d5..eb9a93ef15 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg @@ -17,9 +17,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +28,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg index 82cfff1037..a9cef5ca36 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -line_width = =machine_nozzle_size machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg index 0491fd7613..e8a37bb6fc 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -line_width = =machine_nozzle_size machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg index 5877bc2929..df034335ef 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +27,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg index 6d87f91b8a..299ba1eb95 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -17,9 +17,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +27,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg index b8fa2d70d3..d4a52ed87e 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -17,9 +17,8 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width + initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +27,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg index 87a3c4e2e6..2e7f7b3eb7 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 -infill_line_width = =line_width initial_layer_line_width_factor = 130.0 -line_width = =machine_nozzle_size * (0.58/0.6) material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -28,4 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 -wall_line_width_x = =line_width + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg index be522d3908..9052dfee7d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg index b2201a159e..fd41d88a76 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg @@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -infill_line_width = =round(line_width * 0.65 / 0.75, 2) infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -line_width = =machine_nozzle_size * 0.9375 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) @@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_x = =speed_wall speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 -support_line_width = =line_width * 0.75 support_pattern = ='triangles' support_xy_distance = =wall_line_width_0 * 1.5 top_bottom_thickness = =layer_height * 4 -wall_line_width = =round(line_width * 0.75 / 0.75, 2) -wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) wall_thickness = =wall_line_width_0 + wall_line_width_x |