follow the defaults set in ultimaker.def.json

Only UM2+C keeps his on resolution settings, since this  printer has a lower segments per second performance, and we are not going to work on it. PP-54

19 files changed, 0 insertions, 38 deletions

diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
index 58d05433c0..3ae123e796 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -32,5 +32,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
index 26a74aae03..55edc46a60 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -34,7 +34,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
index 8a6d7bdca2..80d9206f15 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@@ -33,7 +33,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
index 4976153044..66fac26eeb 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -33,7 +33,4 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-
-
-jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
index d057a8a057..c60839af84 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
@@ -27,8 +27,6 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70)
 speed_wall = =math.ceil(speed_print * 55 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
 top_bottom_thickness = 0.8
-jerk_travel = 50
-
 infill_sparse_density = 15
 layer_height_0 = 0.2
 acceleration_wall = 2000
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
index 1ed844b4fc..a9b9c5cfc1 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
@@ -25,7 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 45 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 70)
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
index 2e69215798..e92bc85cac 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
@@ -27,7 +27,5 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 35 / 50)
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
index 8939294b54..c389c1331f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -23,7 +23,5 @@ retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = 10
 top_bottom_thickness = 1
-jerk_travel = 50
-
 layer_height_0 = 0.2
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
index efccc3a347..093be3da66 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
@@ -14,14 +14,10 @@ is_experimental = True
 
 [values]
 infill_sparse_density = 15
-
-jerk_travel = 20
 acceleration_print = 2000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
 acceleration_topbottom = 1000
-acceleration_travel = 2000
-
 speed_print = 50
 speed_wall = 50
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
index 54eb99d099..3e680302c1 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
@@ -14,14 +14,10 @@ is_experimental = True
 
 [values]
 infill_sparse_density = 15
-
-jerk_travel = 20
 acceleration_print = 2000
 acceleration_wall = 1500
 acceleration_wall_0 = 1000
 acceleration_topbottom = 1000
-acceleration_travel = 2000
-
 speed_print = 50
 speed_wall = 50
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
index f7dbe85c00..c715ce4a70 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
@@ -21,5 +21,3 @@ retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-
-jerk_travel = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
index 07e19b9ca3..8f5c87b04e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
@@ -22,5 +22,3 @@ speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-
-jerk_travel = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
index 350c99833c..d4677f4c29 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
@@ -21,5 +21,3 @@ retraction_combing_max_distance = 50
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-
-jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
index 762b2ebca8..e26eb61536 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
@@ -21,6 +21,5 @@ retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
index 855a5ae292..9a1db6e901 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
@@ -22,7 +22,6 @@ speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
index 8b688debf0..294566bec4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
@@ -21,7 +21,6 @@ retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
index 12b4734b7f..3712b9d477 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
@@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index bb6520947b..32e2238da0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
index 847552d471..59f6c26784 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -47,4 +47,3 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-jerk_travel = 50