reduce speed to match maximum flow in CURA413

With the increase in linewidth to the nozzle size, the material flow for especially the infill (but also inner walls) is increased. The speeds are reduced for the superdraft profiles to match the maximum material flow in CURA413. In the future we want to clean this up in a nice way, but for now this at least fixes some serious extrusion problems. PP-104

8 files changed, 15 insertions, 10 deletions

diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg
index 96b7e79ad5..12b8cb993d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg
@@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 25
 material_standby_temperature = 100
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
-speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall = =math.ceil(speed_print * 37 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_infill = =math.ceil(speed_print * 37 / 50)
 retract_at_layer_change = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
index d31ca4ffbe..89ea586ff0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -33,6 +33,7 @@ speed_slowdown_layers = 8
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_infill = =math.ceil(speed_print * 40 / 50)
 support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
index 07e19b9ca3..929557b076 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
@@ -20,7 +20,7 @@ prime_tower_enable = True
 retraction_combing_max_distance = 50
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
-speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-
+speed_infill = =math.ceil(speed_print * 33 / 45)
 jerk_travel = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
index 1ee17fd498..f13d0b015f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
@@ -26,6 +26,6 @@ speed_layer_0 = =math.ceil(speed_print * 15 / 50)
 speed_print = 50
 speed_slowdown_layers = 8
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
-speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall = =math.ceil(speed_print * 37 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-
+speed_infill = =math.ceil(speed_print * 37 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
index 855a5ae292..0725dbd57b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
@@ -20,9 +20,9 @@ prime_tower_enable = True
 retraction_combing_max_distance = 8
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
-speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall = =math.ceil(speed_print * 33 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+speed_infill = =math.ceil(speed_print * 33 / 45)
 jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
-
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg
index 6ea13295ba..f8c3ec8a15 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg
@@ -29,7 +29,8 @@ top_bottom_thickness = =layer_height * 4
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
-speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall = =math.ceil(speed_print * 35 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+speed_infill = =math.ceil(speed_print * 35 / 45)
 layer_height_0 = 0.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
index 067033d1c3..a770f71fe6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -32,6 +32,7 @@ retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+speed_infill = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
 support_offset = =line_width
 switch_extruder_prime_speed = 15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index 4092a930d3..896104d61a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -36,8 +36,9 @@ retraction_hop_only_when_collides = False
 retraction_min_travel = =line_width * 2
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
-speed_wall = =math.ceil(speed_print * 30 / 30)
-speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+speed_infill = =speed_print
 support_angle = 50
 support_bottom_distance = =support_z_distance
 support_offset = =line_width