Updates wall order and top surface quality

For PP-5, PP-27, PP-29

19 files changed, 18 insertions, 19 deletions

diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
index c4d7fb98b9..5e02fba901 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
@@ -19,5 +19,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
 wall_thickness = 0.92
 initial_layer_line_width_factor = 100
-infill_before_walls = true 
+
 material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
index 5b41601923..8ffd11928e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
index 05b4f49595..abc87da36d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
index 9c89019c81..5237ea6eab 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
index e6d76ed573..4459b7079e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_before_walls = True
+
 infill_line_width = =line_width
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
index 2e197f246a..d01339c2e8 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_before_walls = True
+
 infill_line_width = =line_width
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
index 2443b0dd45..d951b5ecf0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_before_walls = True
+
 infill_line_width = =line_width
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg
index e95d4fc943..53e1f3e8aa 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
index 8aadea2b82..9c72305acb 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature_layer_0 = =material_print_temperature
 material_standby_temperature = 100
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg
index edbf13c609..109cb8b6c9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg
@@ -15,7 +15,7 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
-infill_before_walls = True
+
 line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
index 138cb73cae..8b1a944e35 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
@@ -24,4 +24,3 @@ speed_wall = =math.ceil(speed_print * 30 / 40)
 jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
-infill_before_walls = true 
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
index 7635f1f64f..ab045702e2 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
@@ -25,4 +25,4 @@ speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
-infill_before_walls = true 
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
index 4aa2619fec..f22772f612 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
@@ -24,4 +24,4 @@ speed_wall = =math.ceil(speed_print * 30 / 40)
 jerk_travel = 50
 cool_fan_speed = 20
 initial_layer_line_width_factor = 100
-infill_before_walls = true 
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
index 11a00e7466..fe77ed6928 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
index 2f1d841329..2397c882fb 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
index cc6c666d45..8f4ca7e088 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 25
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
index 3592e721d7..b228d5453b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index 460dd06716..07778d66f0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
index 49aef7edde..edf361e7e3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -15,7 +15,7 @@ variant = AA 0.8
 brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
-infill_before_walls = True
+
 infill_line_width = =round(line_width * 0.7 / 0.8, 2)
 infill_pattern = cross_3d
 infill_sparse_density = 10