Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max

Pp 170 clean up retraction limits

32 files changed, 21 insertions, 35 deletions

diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg
index 52499d000c..f895450c0a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index 7f83286f73..ec8409137c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -29,7 +29,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
index 7a3b50c550..76c8372166 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 8
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
index 338bb22d26..df673c641c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
@@ -30,9 +30,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 6
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
-retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
index 495cf61bb5..fc2156acf5 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -27,7 +27,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
index 004a2d1e3b..9a17e20047 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -27,7 +27,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
index d6749fb862..1511dd698e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
@@ -29,7 +29,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
index f6ec122e53..881e89d91b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -28,7 +28,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index a1a6c983d3..1e2f58a3c3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -36,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index 605322ee27..ce5d8a5c89 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -35,8 +35,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index 6445e2deb0..99d5d7ef1d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -37,8 +37,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index 3d7242cf56..15b7a619e8 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -35,8 +35,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
index 5f42de95a2..4ee2ec2f4e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
@@ -35,9 +35,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
index 31e7216706..bd01a9e7e6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
@@ -35,9 +35,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
index 1121fe6507..9cc83fa123 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
@@ -36,9 +36,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
index 5bc61f0fbe..dd4fe11a2c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
@@ -35,9 +35,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
index 0b38a609ba..346bb31931 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
@@ -35,9 +35,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
index 276f497bb3..e8617e309f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -34,9 +34,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
index 1d2d0c68fd..aa86db8c84 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 10
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
index 7026544931..4bf0036315 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 20
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
index 98c8df6a6a..69a33b38f8 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -25,7 +25,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 15
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
index f6d8169fe8..9301d7d69f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
@@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index 561acf9fbc..f410bd8c85 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -29,7 +29,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
index fa432061bb..3df2f2ca0e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
index ef24c27b5a..b4ebe1f4e9 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
@@ -16,5 +16,6 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 20
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
index d630c3bd3a..5f14866677 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
@@ -16,6 +16,7 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 15
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
index 8d5448aafb..9e35615f14 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
@@ -15,5 +15,6 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.18
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
index cf4c07a411..b1774d2c27 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -15,4 +15,5 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
index e7a9936864..bd85b127a7 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
@@ -15,6 +15,7 @@ is_experimental = True
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
index 979295a38d..037e813e7f 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
@@ -15,4 +15,5 @@ variant = BB 0.8
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
index ffdc9c9d26..9a8a17da20 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -14,5 +14,6 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_interface_height = 0.9
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
index 871af303ed..4229ad1758 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -14,6 +14,7 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2