material specific exceptions on the defaults

Some materials can handle higher unretract speeds. Also some unnecessary overwrites of the defaults are removed. PP-96

36 files changed, 23 insertions, 14 deletions

diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg
index efacf651ab..c1d936a7a7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg
@@ -15,6 +15,5 @@ variant = AA 0.25
 cool_fan_speed = 40
 infill_overlap = =0 if infill_sparse_density > 80 else 15
 material_final_print_temperature = =material_print_temperature - 5
-retraction_prime_speed = 25
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 wall_thickness = 0.92
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index ee3750680f..2b6121e9ee 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -34,7 +34,6 @@ retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
index 07aa9462e1..9870b07ab4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
@@ -37,7 +37,7 @@ retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 13
+retraction_prime_speed = 15
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_travel_layer_0 = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
index f6927953d1..26dc7ea9c3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -32,6 +32,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
index ffb22e619d..4b3fcd3fd9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -32,6 +32,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
index 262e6583a2..6fc1c398c4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
@@ -34,6 +34,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
index a11519fb05..4f7901cd52 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -33,6 +33,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg
index 6c1a3a45af..3f3ce3ce79 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg
@@ -16,6 +16,7 @@ material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 speed_print = 60
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg
index 71c25958fa..cbabc4d432 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg
@@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg
index 9692faac22..86c81a14a2 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg
@@ -19,6 +19,7 @@ material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg
index 5698375c63..62163c286e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg
@@ -17,6 +17,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
index 9a02eeede4..58d05433c0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -26,6 +26,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
index 01859d49a1..26a74aae03 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
index c25a46ce20..8a6d7bdca2 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
index 321c369975..4976153044 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index 2fdc113b3c..601d1164fd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -42,7 +42,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index 9adceaa9cd..cad4e25f95 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index 65364d955a..6cc4d15e73 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index e6adcfaf22..093a04b8a2 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
index fcc7ce6278..f339aa3988 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
@@ -19,6 +19,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
index 27df25d5d5..206442121b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
@@ -18,6 +18,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 speed_print = 70
 speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
index 9df48afa7b..3f29983cfd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
@@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_print = 50
 speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
index b3d096ed71..227730f359 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -19,6 +19,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = 10
 top_bottom_thickness = 1
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
index 376cebd718..141c4604b0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
@@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
index 3acfe41222..8c8091cb1e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
@@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
index 4f7e5c5860..047ee82739 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
@@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
index b2b03b494d..c91c73983e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
@@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
index ef698a68e6..d65f61cf74 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
@@ -23,6 +23,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
index e66b376515..bea0ca9228 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
@@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
index cb9e545007..190f2f8e06 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
@@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_print = 45
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
index 405fd35825..190f3422b0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
@@ -21,6 +21,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
index bd3193df37..9e614cdd28 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
@@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
index 30eb73204b..a867e168b1 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
@@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
index b63ecbdad8..f4ef171a69 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
@@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
index ff25dd69a9..ce9b26051e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -40,7 +40,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index a400721d90..99511e1ab6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -34,7 +34,6 @@ retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 30 / 30)