Set line widths equal to nozzle diameter

and remove line width lines from profiles (PP-13)

80 files changed, 110 insertions, 216 deletions

diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg
index bddbc0a804..5d70a4654b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg
@@ -14,7 +14,7 @@ variant = AA 0.25
 [values]
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
+
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
@@ -32,4 +32,4 @@ speed_wall = =math.ceil(speed_print * 30 / 70)
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index 4d6e63f717..5b33819817 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -19,7 +19,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-infill_line_width = =line_width
+
 infill_pattern = triangles
 infill_wipe_dist = 0.1
 jerk_enabled = True
@@ -49,5 +49,5 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
index 665bcdb56e..d8b9738910 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
@@ -17,12 +17,12 @@ brim_width = 10
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.92
+
 machine_min_cool_heat_time_window = 15
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_final_print_temperature = =material_print_temperature - 10
@@ -52,5 +52,5 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 travel_avoid_distance = 3
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg
index 9f77222c38..cf07723ce3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_TPLA_Normal_Quality.inst.cfg
@@ -15,10 +15,10 @@ variant = AA 0.25
 brim_width = 8
 cool_fan_full_at_height = =layer_height_0
 cool_min_speed = 7
-infill_line_width = =line_width
+
 infill_overlap = 10
 infill_pattern = grid
-line_width = =machine_nozzle_size * 0.92
+
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 top_bottom_thickness = 0.72
 wall_0_inset = 0.015
 wall_0_wipe_dist = 0.25
-wall_line_width = =line_width
-wall_line_width_x= =line_width
 wall_thickness = 0.7
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg
index 156684593d..92e4ca53ea 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg
@@ -25,8 +25,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 wall_thickness = 1
-
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 50 / 60)
-
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg
index 8ec3cf7ff6..8b3af8702f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg
@@ -24,8 +24,5 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 45 / 60)
-
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg
index 8c2274b4f9..4d92585cdb 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg
@@ -24,7 +24,7 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
 
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 speed_infill = =math.ceil(speed_print * 40 / 50)
 
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg
index 172e4fc147..5d575bfc75 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg
@@ -23,6 +23,6 @@ speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
 
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 speed_infill = =math.ceil(speed_print * 40 / 55)
 raft_airgap = 0.15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
index c434ca1ebe..db713524e3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -14,7 +14,7 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 80
 cool_min_speed = 5
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
+
 infill_overlap = 0
 infill_wipe_dist = 0
 jerk_enabled = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
index 2b1f8dad32..7710a2372b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -14,7 +14,7 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 80
 cool_min_speed = 6
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
+
 infill_overlap = 0
 infill_wipe_dist = 0
 jerk_enabled = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
index cd034f531a..6313577880 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
@@ -14,7 +14,7 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 50
 cool_min_speed = 5
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
+
 infill_overlap = 0
 infill_wipe_dist = 0
 jerk_enabled = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
index 1ba548fc58..8a757abeb5 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.4
 [values]
 cool_fan_speed_max = 50
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.35 / 0.35, 2)
 infill_overlap = 0
 infill_wipe_dist = 0
 jerk_enabled = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
index 5a8dd34130..67f2fe4a45 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -15,8 +15,6 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
 material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
@@ -33,7 +31,5 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
-
 jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
index 76ffa690a3..b8ab1712e9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -15,8 +15,8 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
+
+
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
@@ -33,7 +33,7 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
+
 
 jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
index ae67bb193b..702ccd8fcd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@@ -15,8 +15,8 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 15
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
+
+
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
@@ -32,7 +32,7 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
+
 
 jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
index fc62e4b299..89be14ed90 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -15,8 +15,8 @@ variant = AA 0.4
 adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
-infill_line_width = =round(line_width * 0.5 / 0.4, 2)
-line_width = =machine_nozzle_size
+
+
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
@@ -32,7 +32,7 @@ speed_layer_0 = 10
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
-wall_line_width_x = =wall_line_width
+
 
 jerk_travel = 50
 raft_surface_speed = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index b962c495ac..85596210a6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -18,7 +18,6 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 90
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 6
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 infill_overlap = 0
 infill_overlap_mm = 0.05
 infill_pattern = triangles
@@ -57,5 +56,4 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index 39b6950cd4..7efa54f778 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 85
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 infill_overlap_mm = 0.05
 infill_pattern = triangles
 infill_wipe_dist = 0.1
@@ -57,5 +57,5 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index 813f8e47b9..efd031273b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 8
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 infill_overlap = 0
 infill_overlap_mm = 0.05
 infill_pattern = triangles
@@ -58,5 +58,5 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index f257b35f2e..327c2e81c4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -18,7 +18,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+
 infill_overlap = 0
 infill_pattern = triangles
 infill_wipe_dist = 0.1
@@ -56,5 +56,5 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
index 734501d7ae..19540fba2c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
@@ -29,7 +29,7 @@ top_bottom_thickness = 0.8
 wall_thickness = 0.8
 
 jerk_travel = 50
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+
 infill_sparse_density = 15
 layer_height_0 = 0.2
 acceleration_wall = 2000
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
index a8a8cfd35e..29ecfb903b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
@@ -27,6 +27,6 @@ top_bottom_thickness = 1
 wall_thickness = 1
 
 jerk_travel = 50
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+
 layer_height_0 = 0.2
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
index 4009bfaad0..8abcd19440 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
@@ -29,6 +29,6 @@ top_bottom_thickness = 1
 wall_thickness = 1
 
 jerk_travel = 50
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+
 layer_height_0 = 0.2
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
index 930ef3b7c7..b133cde125 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -25,6 +25,6 @@ top_bottom_thickness = 1
 wall_thickness = 1
 
 jerk_travel = 50
-infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+
 layer_height_0 = 0.2
 raft_airgap = 0.25
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
index 4135680fb3..666382da2b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
@@ -17,13 +17,13 @@ cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
+
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
@@ -55,5 +55,5 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
index c1b687c61a..f503800a2f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
@@ -17,13 +17,13 @@ cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
+
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
@@ -57,5 +57,5 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1.1
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
index 7900ed2944..80f1d5c522 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
@@ -17,13 +17,13 @@ cool_fan_speed_max = 100
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 7
 cool_min_speed = 2.5
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = tetrahedral
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
+
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.85
 machine_nozzle_heat_up_speed = 1.5
@@ -57,5 +57,5 @@ switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 1
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = =line_width * 3
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
index 7373f53e33..2dd354c591 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.4
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
-infill_line_width = =round(line_width * 0.45/0.35,2)
 jerk_print = 25
 jerk_roofing = 1
 layer_height_0 = 0.2
@@ -34,5 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 36 / 50)
 speed_wall_0 = =math.ceil(speed_print * 26 / 50)
 top_bottom_thickness = 1.2
-wall_line_width_x = =round(line_width * 0.35/0.35,2)
+
 wall_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
index 64a6a3f0a4..414002f41c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
@@ -14,7 +14,6 @@ variant = AA 0.4
 [values]
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
-infill_line_width = =round(line_width * 1.285, 2)
 layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
@@ -27,5 +26,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 top_bottom_thickness = 1.2
-wall_line_width_x = =round(line_width * 0.35/0.35,2)
+
 wall_thickness = 1.23
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
index a4241a45c0..c7eaaad188 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
@@ -28,9 +28,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 top_bottom_thickness = 1.2
 wall_thickness = 1.23
-
 layer_height_0 = 0.2
-
-line_width = =round(machine_nozzle_size * 1.025, 3)
-wall_line_width_x = =line_width
-infill_line_width = =line_width
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
index 1a2878fed2..94e5f21630 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
@@ -15,7 +15,6 @@ variant = AA 0.4
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =cool_fan_speed
 cool_min_speed = 7
-infill_line_width = =round(line_width * 1.285, 2)
 layer_height_0 = 0.2
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
index 05b8d39dcd..9fb1c609a5 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
@@ -17,14 +17,14 @@ cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = cross_3d
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
+
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
@@ -56,5 +56,5 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = 0.76
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
index e0836510d7..1877d2b85d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
@@ -17,14 +17,14 @@ cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = cross_3d
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
+
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
@@ -56,6 +56,6 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = 0.76
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
index 48227c0a1a..15956837e7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -17,14 +17,14 @@ cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 4
 gradual_infill_step_height = =5 * layer_height
-infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+
 infill_overlap = 0
 infill_pattern = cross_3d
 infill_sparse_density = 10
 infill_wipe_dist = 0.1
 jerk_enabled = True
 jerk_print = 25
-line_width = =machine_nozzle_size * 0.95
+
 machine_min_cool_heat_time_window = 15
 machine_nozzle_cool_down_speed = 0.5
 machine_nozzle_heat_up_speed = 2.5
@@ -55,6 +55,6 @@ switch_extruder_retraction_speeds = 35
 top_bottom_thickness = 0.7
 travel_avoid_distance = 1.5
 wall_0_inset = 0
-wall_line_width_x = =line_width
+
 wall_thickness = 0.76
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg
index 0f4e96d747..5df2bcfb82 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg
@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.8
 
 [values]
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 20
 material_standby_temperature = 100
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg
index 07ebd60b2c..ebd187fc1b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg
@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.8
 
 [values]
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 25
 material_standby_temperature = 100
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg
index 95dc342945..b97ae609d3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg
@@ -12,7 +12,7 @@ material = generic_abs
 variant = AA 0.8
 
 [values]
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 22
 material_standby_temperature = 100
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
index 8ffd11928e..347ffd48ac 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
@@ -16,7 +16,6 @@ is_experimental = True
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 10
@@ -34,6 +33,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
index abc87da36d..0e6600bad9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -16,7 +16,7 @@ is_experimental = True
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
 
-line_width = =machine_nozzle_size * 0.9375
+
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 5
@@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
index 5237ea6eab..7fe450be9b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -16,7 +16,7 @@ is_experimental = True
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
 
-line_width = =machine_nozzle_size * 0.9375
+
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_print_temperature = =default_material_print_temperature - 7
@@ -34,6 +34,6 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
+
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
index 8e31caaeb3..2d0ae892be 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 15
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 15
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
index d3a77ad844..befcdb7b3a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 15
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 20
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
index 5fa91c4ae0..b7ab4be733 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 15
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature + 17
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
index 4459b7079e..4b1705c084 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -15,8 +15,6 @@ variant = AA 0.8
 brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-
-infill_line_width = =line_width
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
@@ -28,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
index d01339c2e8..02d87b8600 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -15,8 +15,6 @@ variant = AA 0.8
 brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-
-infill_line_width = =line_width
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
@@ -28,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
index d951b5ecf0..a7180a4f9b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 5.6
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 
-infill_line_width = =line_width
+
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 material_standby_temperature = 100
@@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg
index 53e1f3e8aa..a2ea24662b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg
@@ -16,7 +16,7 @@ is_experimental = True
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
 
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature - 5
 material_print_temperature_layer_0 = =material_print_temperature
 material_standby_temperature = 100
@@ -29,4 +29,4 @@ speed_slowdown_layers = 15
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
index 9c72305acb..539f732dfd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg
@@ -16,7 +16,7 @@ is_experimental = True
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
 
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature_layer_0 = =material_print_temperature
 material_standby_temperature = 100
 raft_airgap = 0.5
@@ -28,4 +28,4 @@ speed_slowdown_layers = 8
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
+
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg
index 109cb8b6c9..8a1eb6519b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg
@@ -15,8 +15,6 @@ is_experimental = True
 [values]
 brim_width = 14
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
-
-line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 2
 material_print_temperature_layer_0 = =material_print_temperature
 material_standby_temperature = 100
@@ -29,4 +27,3 @@ speed_slowdown_layers = 10
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-support_line_width = =round(line_width * 0.6 / 0.7, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
index 8b1a944e35..ad368149c8 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 7
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
index ab045702e2..ba091c8b17 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 7
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
index f22772f612..59c97e5b76 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg
@@ -13,7 +13,7 @@ variant = AA 0.8
 
 [values]
 brim_width = 7
-line_width = =machine_nozzle_size * 0.875
+
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg
index 472b9443ef..dad634521b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg
@@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -25,13 +23,9 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature -
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
-
 retract_at_layer_change = False
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg
index 2e567f9078..60964f7210 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg
@@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -26,11 +24,8 @@ material_print_temperature = =default_material_print_temperature + 15
 prime_tower_enable = True
 raft_margin = 10
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg
index 3f97a63acc..240a8108f7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg
@@ -16,8 +16,6 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -25,11 +23,8 @@ material_initial_print_temperature = =max(-273.15, material_print_temperature -
 material_print_temperature = =default_material_print_temperature + 10
 prime_tower_enable = True
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
index fe77ed6928..7ed303a517 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
@@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
 
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
 jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -36,15 +36,12 @@ retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
 wall_thickness = 1.6
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
index 2397c882fb..28a67ff727 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
 
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
 jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -36,15 +36,13 @@ retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
+
 wall_thickness = 1.6
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
index 8f4ca7e088..7feb2ffdda 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -17,7 +17,7 @@ cool_min_layer_time_fan_speed_max = 6
 cool_min_speed = 17
 top_skin_expand_distance = =line_width * 2
 
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+
 infill_pattern = tetrahedral
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
 jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -35,15 +35,13 @@ retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.6
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
+
 wall_thickness = 1.6
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg
index 5b632ea5df..0b2e183947 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg
@@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.75 / 0.75, 2)
 infill_pattern = cubic
 layer_height_0 = 0.4
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -32,9 +30,6 @@ speed_topbottom = =round(speed_print * 35 / 45)
 speed_wall = =round(speed_print * 40 / 45)
 speed_wall_0 = =round(speed_print * 35 / 45)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 6
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg
index 5840a142b0..74b6765685 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg
@@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.75 / 0.75, 2)
 infill_pattern = cubic
 layer_height_0 = 0.4
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,8 +32,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 25/ 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg
index 9a800ad838..0d90fa543f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg
@@ -16,10 +16,8 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.75 / 0.75, 2)
 infill_pattern = cubic
 layer_height_0 = 0.4
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -35,9 +33,6 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35)
 speed_wall = =math.ceil(speed_print * 25/ 35)
 speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
index b228d5453b..8feb40167c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
 
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+
 infill_pattern = cross_3d
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
 jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -39,14 +39,12 @@ retraction_hop = 1.5
 retraction_hop_only_when_collides = False
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 25 / 30)
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
@@ -54,6 +52,5 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
 wall_thickness = 1.3
 jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index 07778d66f0..efa8ed52fd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
 
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+
 infill_pattern = cross_3d
 infill_sparse_density = 10
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -40,14 +40,12 @@ retraction_hop = 1.5
 retraction_hop_only_when_collides = False
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
@@ -55,6 +53,5 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
 wall_thickness = 1.3
 jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
index edf361e7e3..30aa50b2f0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -16,7 +16,7 @@ brim_width = 8.75
 cool_min_layer_time_fan_speed_max = 6
 top_skin_expand_distance = =line_width * 2
 
-infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+
 infill_pattern = cross_3d
 infill_sparse_density = 10
 jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20)
@@ -39,14 +39,12 @@ retraction_hop = 1.5
 retraction_hop_only_when_collides = False
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = 15
-skin_line_width = =round(line_width * 0.78 / 0.8, 2)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 23 / 30)
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_line_width = =round(line_width * 0.7 / 0.8, 2)
 support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
@@ -54,6 +52,6 @@ switch_extruder_retraction_speeds = 45
 top_bottom_thickness = 1.2
 travel_avoid_distance = 1.5
 wall_0_wipe_dist = =line_width * 2
-wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
+
 wall_thickness = 1.3
 jerk_travel = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
index 90123d5c39..9125145dae 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
index b35838edf2..bfc159f656 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
index 80bd62f36a..503980d76e 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
index 5fc9661de9..9216994d0a 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
index 1b10f01a6a..fc07c21439 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
index 7aedd8dbdb..b79484e54a 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
index 4d7a2ef685..8d6b4ee796 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
index 023763dfd7..b95351cde0 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
@@ -17,9 +17,9 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size 
+
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +28,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg
index 3fb92b6f8b..abbcd3a747 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
 infill_pattern = triangles
-line_width = =machine_nozzle_size 
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg
index c02df86438..06cfa6e6c5 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
 infill_pattern = triangles
-line_width = =machine_nozzle_size 
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
index 3a8c651fc0..2a69cd445c 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
@@ -17,9 +17,8 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size * (0.58/0.6)
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +27,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
index 641e4b9a6d..d754d2e6a0 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
@@ -17,9 +17,8 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size * (0.58/0.6)
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +27,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
index e035ffcad0..fb68f5abc7 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
@@ -17,9 +17,8 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
+
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size * (0.58/0.6)
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +27,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
index 70e4142e98..c32e8d446d 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-infill_line_width = =line_width
 initial_layer_line_width_factor = 130.0
-line_width = =machine_nozzle_size * (0.58/0.6)
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
@@ -28,4 +26,4 @@ skin_overlap = 20
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
-wall_line_width_x = =line_width
+
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg
index 0222afd01b..058aecc495 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
 infill_pattern = triangles
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg
index 5c8c1d2b53..b12afe0366 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg
@@ -17,9 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_fan_speed_max = =100
 cool_min_speed = 2
 gradual_infill_step_height = =3 * layer_height
-infill_line_width = =round(line_width * 0.65 / 0.75, 2)
 infill_pattern = triangles
-line_width = =machine_nozzle_size * 0.9375
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
@@ -34,10 +32,7 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_line_width = =line_width * 0.75
 support_pattern = ='triangles'
 support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
-wall_line_width = =round(line_width * 0.75 / 0.75, 2)
-wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
 wall_thickness = =wall_line_width_0 + wall_line_width_x