Updates acceleration settings to a max of 3500mmps2

And increases minimum to 1000mmps2.

16 files changed, 0 insertions, 32 deletions

diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index 9528a81950..4d6e63f717 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -13,8 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
index ce92209489..665bcdb56e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
@@ -13,8 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 10
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 5
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
index fbdb5dfb08..c434ca1ebe 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 80
 cool_min_speed = 5
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
index 02d70b8418..2b1f8dad32 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 80
 cool_min_speed = 6
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
index 7f391f689f..cd034f531a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 50
 cool_min_speed = 5
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
index 3148b99c74..1ba548fc58 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 50
 cool_min_speed = 7
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index 915c5d624e..b962c495ac 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index c934e66e1d..39b6950cd4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index 1b2fe478b2..813f8e47b9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index 7049f8601d..f257b35f2e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
index 6ebb81c560..4135680fb3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
index 9d4a379bd6..c1b687c61a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
index 959d3199d0..7900ed2944 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
index f2f557b8b8..05b8d39dcd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
index 78592d5de2..e0836510d7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
index 1a81413d39..48227c0a1a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6