move temperature setting in material

move temperature setting in material

8 files changed, 28 insertions, 104 deletions

diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_coarse.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_coarse.inst.cfg
deleted file mode 100644
index 0f4e18b7ea..0000000000
--- a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_coarse.inst.cfg
+++ /dev/null
@@ -1,24 +0,0 @@
-[general]
-version = 4
-name = Coarse Quality
-definition = xyzprinting_base
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = coarse
-material = xyzprinting_flexible
-variant = Copper 0.4mm Nozzle
-
-[values]
-material_bed_temperature = 70
-material_bed_temperature_layer_0 = =material_bed_temperature
-material_print_temperature = 220
-material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature
-material_final_print_temperature = =material_print_temperature
-speed_print = 30
-speed_infill = =speed_print
-speed_support = =speed_print
-speed_travel = 100
-infill_sparse_density = 20
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_draft.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_draft.inst.cfg
deleted file mode 100644
index 31b7019918..0000000000
--- a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_draft.inst.cfg
+++ /dev/null
@@ -1,24 +0,0 @@
-[general]
-version = 4
-name = Draft Quality
-definition = xyzprinting_base
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = draft
-material = xyzprinting_flexible
-variant = Copper 0.4mm Nozzle
-
-[values]
-material_bed_temperature = 70
-material_bed_temperature_layer_0 = =material_bed_temperature
-material_print_temperature = 220
-material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature
-material_final_print_temperature = =material_print_temperature
-speed_print = 30
-speed_infill = =speed_print
-speed_support = =speed_print
-speed_travel = 100
-infill_sparse_density = 20
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_fine.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_fine.inst.cfg
deleted file mode 100644
index cb56683ab3..0000000000
--- a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_fine.inst.cfg
+++ /dev/null
@@ -1,24 +0,0 @@
-[general]
-version = 4
-name = Fine Quality
-definition = xyzprinting_base
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = fine
-material = xyzprinting_flexible
-variant = Copper 0.4mm Nozzle
-
-[values]
-material_bed_temperature = 70
-material_bed_temperature_layer_0 = =material_bed_temperature
-material_print_temperature = 220
-material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature
-material_final_print_temperature = =material_print_temperature
-speed_print = 30
-speed_infill = =speed_print
-speed_support = =speed_print
-speed_travel = 100
-infill_sparse_density = 20
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_normal.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_normal.inst.cfg
deleted file mode 100644
index eace939e15..0000000000
--- a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_normal.inst.cfg
+++ /dev/null
@@ -1,24 +0,0 @@
-[general]
-version = 4
-name = Normal Quality
-definition = xyzprinting_base
-
-[metadata]
-setting_version = 17
-type = quality
-quality_type = normal
-material = xyzprinting_flexible
-variant = Copper 0.4mm Nozzle
-
-[values]
-material_bed_temperature = 70
-material_bed_temperature_layer_0 = =material_bed_temperature
-material_print_temperature = 220
-material_print_temperature_layer_0 = =material_print_temperature
-material_initial_print_temperature = =material_print_temperature
-material_final_print_temperature = =material_print_temperature
-speed_print = 30
-speed_infill = =speed_print
-speed_support = =speed_print
-speed_travel = 100
-infill_sparse_density = 20
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_coarse.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_coarse.inst.cfg
index ac68b16751..4eb1a0734c 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_coarse.inst.cfg
@@ -7,19 +7,24 @@ definition = xyzprinting_da_vinci_super
 setting_version = 17
 type = quality
 quality_type = coarse
+weight = -3
+global_quality = True
 material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-material_bed_temperature = 70
+layer_height = 0.4
+layer_height_0 = 0.4
+material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
-material_print_temperature = 220
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_infill = =speed_print
 speed_support = =speed_print
+speed_topbottom = 10 
 speed_travel = 100
 infill_sparse_density = 20
 retraction_amount = 6.0
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_draft.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_draft.inst.cfg
index a47ba48b28..4c96294da0 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_draft.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_draft.inst.cfg
@@ -7,19 +7,24 @@ definition = xyzprinting_da_vinci_super
 setting_version = 17
 type = quality
 quality_type = draft
+weight = -2
+global_quality = True
 material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-material_bed_temperature = 70
+layer_height = 0.3
+layer_height_0 = 0.4
+material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
-material_print_temperature = 220
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_infill = =speed_print
 speed_support = =speed_print
+speed_topbottom = 10 
 speed_travel = 100
 infill_sparse_density = 20
 retraction_amount = 6.0
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_fine.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_fine.inst.cfg
index 95ce01966a..98d146d7c4 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_fine.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_fine.inst.cfg
@@ -7,19 +7,24 @@ definition = xyzprinting_da_vinci_super
 setting_version = 17
 type = quality
 quality_type = fine
+weight = 0
+global_quality = True
 material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-material_bed_temperature = 70
+layer_height = 0.1
+layer_height_0 = 0.2
+material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
-material_print_temperature = 220
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_infill = =speed_print
 speed_support = =speed_print
+speed_topbottom = 10 
 speed_travel = 100
 infill_sparse_density = 20
 retraction_amount = 6.0
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_normal.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_normal.inst.cfg
index 33e90d4fd5..a6645706fe 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_normal.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_normal.inst.cfg
@@ -7,19 +7,24 @@ definition = xyzprinting_da_vinci_super
 setting_version = 17
 type = quality
 quality_type = normal
+weight = -1
+global_quality = True
 material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-material_bed_temperature = 70
+layer_height = 0.2
+layer_height_0 = 0.35
+material_diameter = 1.75
 material_bed_temperature_layer_0 = =material_bed_temperature
-material_print_temperature = 220
 material_print_temperature_layer_0 = =material_print_temperature
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_infill = =speed_print
 speed_support = =speed_print
+speed_topbottom = 10 
 speed_travel = 100
 infill_sparse_density = 20
 retraction_amount = 6.0