modify definition & quality

1.move cool_fan to definition from quality
2.use parameter to replace actual value when value equal

176 files changed, 1647 insertions, 1238 deletions

diff --git a/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_coarse.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_coarse.inst.cfg
index 7f528d34b8..f6ab591b7b 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_coarse.inst.cfg
@@ -11,13 +11,13 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 90
-material_bed_temperature_layer_0 = 90
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_draft.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_draft.inst.cfg
index 5df9d6ba1d..d5caa46fae 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_draft.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_draft.inst.cfg
@@ -11,13 +11,13 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 90
-material_bed_temperature_layer_0 = 90
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_fine.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_fine.inst.cfg
index 96baf9e16e..ead453f1c8 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_fine.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_fine.inst.cfg
@@ -11,13 +11,13 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 90
-material_bed_temperature_layer_0 = 90
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_normal.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_normal.inst.cfg
index 5864c1a1ae..75263de48c 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_normal.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_0.40_copper_abs_normal.inst.cfg
@@ -11,13 +11,13 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 90
-material_bed_temperature_layer_0 = 90
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_coarse.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_coarse.inst.cfg
index 3265aed964..3972f39948 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_coarse.inst.cfg
@@ -11,19 +11,17 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-material_initial_print_temperature = 240
-material_final_print_temperature = 240
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_wall = 20
 speed_print = 60
 speed_topbottom = 10 
 speed_roofing = 20
-speed_infill = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 retraction_amount = 3.0
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_draft.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_draft.inst.cfg
index 69b85ea6c2..a1c150d361 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_draft.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_draft.inst.cfg
@@ -11,19 +11,17 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-material_initial_print_temperature = 240
-material_final_print_temperature = 240
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_wall = 20
 speed_print = 60
 speed_topbottom = 10 
 speed_roofing = 20
-speed_infill = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 retraction_amount = 3.0
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_fine.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_fine.inst.cfg
index cf1f8048f9..51e10b7ff3 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_fine.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_fine.inst.cfg
@@ -11,19 +11,17 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-material_initial_print_temperature = 240
-material_final_print_temperature = 240
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_wall = 20
 speed_print = 60
 speed_topbottom = 10 
 speed_roofing = 20
-speed_infill = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 retraction_amount = 3.0
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_normal.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_normal.inst.cfg
index faad12eb51..0e07a2e722 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_normal.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_abs_normal.inst.cfg
@@ -11,19 +11,17 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-material_initial_print_temperature = 240
-material_final_print_temperature = 240
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_wall = 20
 speed_print = 60
 speed_topbottom = 10 
 speed_roofing = 20
-speed_infill = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 retraction_amount = 3.0
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_coarse.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_coarse.inst.cfg
index 88864f76cb..08db4b93e7 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_coarse.inst.cfg
@@ -11,18 +11,16 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 90
-material_bed_temperature_layer_0 = 90
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-material_initial_print_temperature = 240
-material_final_print_temperature = 240
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 40
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_draft.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_draft.inst.cfg
index 639ba437c1..d7c3141c8b 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_draft.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_draft.inst.cfg
@@ -11,18 +11,16 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 90
-material_bed_temperature_layer_0 = 90
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-material_initial_print_temperature = 240
-material_final_print_temperature = 240
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 40
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_fine.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_fine.inst.cfg
index 0c8e1cb669..cfe24d7564 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_fine.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_fine.inst.cfg
@@ -11,18 +11,16 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 90
-material_bed_temperature_layer_0 = 90
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-material_initial_print_temperature = 240
-material_final_print_temperature = 240
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 40
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_normal.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_normal.inst.cfg
index 7c045c5bf0..7565eb57a3 100644
--- a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_normal.inst.cfg
+++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_super_copper_0.40_abs_normal.inst.cfg
@@ -11,18 +11,16 @@ material = generic_abs
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 90
-material_bed_temperature_layer_0 = 90
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 240
-material_print_temperature_layer_0 = 240
-material_initial_print_temperature = 240
-material_final_print_temperature = 240
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 40
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_coarse.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_coarse.inst.cfg
index 66b8fa7ccd..67d6cc5a3c 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_coarse.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_antibact_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
-material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_draft.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_draft.inst.cfg
index 63c793da28..66f882dfab 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_draft.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_draft.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_antibact_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
-material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_fine.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_fine.inst.cfg
index 8ff9fb31a8..5b291d2d8a 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_fine.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_fine.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_antibact_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
-material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_normal.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_normal.inst.cfg
index c97e219a5f..f75d2c5c83 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_normal.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_0.40_antibact_normal.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_antibact_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
-material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_coarse.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_coarse.inst.cfg
index fe84c38030..9a8d7218e9 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_coarse.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_draft.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_draft.inst.cfg
index 5b22b543d5..8a94e59909 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_draft.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_draft.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_fine.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_fine.inst.cfg
index 97c60be7de..0625bd5faa 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_fine.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_fine.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_normal.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_normal.inst.cfg
index 426509b57d..811218ecdf 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_normal.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_antibact_normal.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_coarse.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_coarse.inst.cfg
index 1f2602cfd2..45cc7da185 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_coarse.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_draft.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_draft.inst.cfg
index bd36138949..42c0413144 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_draft.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_draft.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_fine.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_fine.inst.cfg
index 23fbb4aa1e..eb59ccf2ed 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_fine.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_fine.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_normal.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_normal.inst.cfg
index 4fa1e4abee..2ee39e3604 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_normal.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_antibact_normal.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_coarse.inst b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_coarse.inst
new file mode 100644
index 0000000000..f608598a9e
--- /dev/null
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_coarse.inst
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = coarse
+material = xyzprinting_antibact_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_draft.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_draft.inst.cfg
new file mode 100644
index 0000000000..2d23116418
--- /dev/null
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_draft.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Draft Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+material = xyzprinting_antibact_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_fine.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_fine.inst.cfg
new file mode 100644
index 0000000000..a4b31105f3
--- /dev/null
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_fine.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Fine Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = fine
+material = xyzprinting_antibact_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_normal.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_normal.inst.cfg
new file mode 100644
index 0000000000..612d5bd00a
--- /dev/null
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_jr_w_pro_ss_0.40_antibact_normal.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Normal Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+material = xyzprinting_antibact_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_coarse.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_coarse.inst.cfg
index cc413a8953..1e4a222c54 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_coarse.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
-material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
 retraction_speed = 80
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_draft.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_draft.inst.cfg
index 39750f6ca6..47cfbe76ca 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_draft.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_draft.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
-material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
 retraction_speed = 80
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_fine.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_fine.inst.cfg
index e109e3e1e7..1bce0ec0f6 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_fine.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_fine.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
-material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
 retraction_speed = 80
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_normal.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_normal.inst.cfg
index 26a5fea621..d0d0f2d39e 100644
--- a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_normal.inst.cfg
+++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_super_copper_0.40_antibact_normal.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_antibact_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
-material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
 retraction_speed = 80
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_coarse.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_coarse.inst.cfg
index f67f3fc1c8..706f9e2f47 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_coarse.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_draft.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_draft.inst.cfg
index 76a6f23917..26fd559987 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_draft.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_draft.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_fine.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_fine.inst.cfg
index 46bf4e101b..9f3390d1c1 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_fine.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_fine.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_normal.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_normal.inst.cfg
index 319bd53c9e..6b4ca1caed 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_normal.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_0.40_hs_carbon_normal.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_coarse.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_coarse.inst.cfg
index 57c36b4963..0c4c311948 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_coarse.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_draft.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_draft.inst.cfg
index 5d26222c30..b4dc5ceb1a 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_draft.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_draft.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_fine.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_fine.inst.cfg
index d1fe0d14b8..8b8313144d 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_fine.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_fine.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_normal.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_normal.inst.cfg
index d300bf3bf9..52fcd77c0c 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_normal.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_carbon_fiber_normal.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = 30
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_coarse.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_coarse.inst.cfg
index 86da828388..f4aea921b2 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_coarse.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-material_initial_print_temperature = 215
-material_final_print_temperature = 215
-speed_wall = 30
+matematerial_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 40
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 8.0
 retraction_speed = 20
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_draft.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_draft.inst.cfg
index 962f58dcd2..c039a1602e 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_draft.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_draft.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-material_initial_print_temperature = 215
-material_final_print_temperature = 215
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 40
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 8.0
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_fine.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_fine.inst.cfg
index 5d9a4f2cbf..0b3b9df873 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_fine.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_fine.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-material_initial_print_temperature = 215
-material_final_print_temperature = 215
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 40
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 8.0
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_normal.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_normal.inst.cfg
index b8e4ff1e27..88828e68b5 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_normal.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_carbon_fiber_normal.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-material_initial_print_temperature = 215
-material_final_print_temperature = 215
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 40
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 8.0
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_coarse.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_coarse.inst.cfg
new file mode 100644
index 0000000000..6585f2af50
--- /dev/null
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_coarse.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = coarse
+material = xyzprinting_carbon_fiber
+variant = Hardened Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 8.0
+retraction_speed = 50
+skirt_brim_speed = 15
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_draft.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_draft.inst.cfg
new file mode 100644
index 0000000000..b9804dcf70
--- /dev/null
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_draft.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Draft Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+material = xyzprinting_carbon_fiber
+variant = Hardened Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 8.0
+retraction_speed = 50
+skirt_brim_speed = 15
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_fine.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_fine.inst.cfg
new file mode 100644
index 0000000000..99e6738103
--- /dev/null
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_fine.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Fine Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = fine
+material = xyzprinting_carbon_fiber
+variant = Hardened Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 8.0
+retraction_speed = 50
+skirt_brim_speed = 15
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_normal.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_normal.inst.cfg
new file mode 100644
index 0000000000..606a5c70bd
--- /dev/null
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_jr_w_pro_hs_0.40_carbon_fiber_normal.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Normal Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+material = xyzprinting_carbon_fiber
+variant = Hardened Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 8.0
+retraction_speed = 50
+skirt_brim_speed = 15
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_coarse.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_coarse.inst.cfg
index 3b31da9c54..91b5b5ee7e 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_coarse.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-material_initial_print_temperature = 215
-material_final_print_temperature = 215
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 6.0
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_draft.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_draft.inst.cfg
index 4f8e480535..0664a1b579 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_draft.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_draft.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-material_initial_print_temperature = 215
-material_final_print_temperature = 215
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 6.0
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_fine.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_fine.inst.cfg
index a40d5a3ab2..8d3cdbee72 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_fine.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_fine.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-material_initial_print_temperature = 215
-material_final_print_temperature = 215
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 6.0
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_normal.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_normal.inst.cfg
index ae1590cd95..c78c753cee 100644
--- a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_normal.inst.cfg
+++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_super_hs_0.40_carbon_fiber_normal.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_carbon_fiber
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 215
-material_print_temperature_layer_0 = 215
-material_initial_print_temperature = 215
-material_final_print_temperature = 215
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 6.0
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_coarse.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_coarse.inst.cfg
index 76b11c7a7d..0f4e18b7ea 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_coarse.inst.cfg
@@ -11,14 +11,14 @@ material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 100
 infill_sparse_density = 20
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_draft.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_draft.inst.cfg
index dce7262f47..31b7019918 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_draft.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_draft.inst.cfg
@@ -11,14 +11,14 @@ material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 100
 infill_sparse_density = 20
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_fine.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_fine.inst.cfg
index a70c09406b..cb56683ab3 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_fine.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_fine.inst.cfg
@@ -11,14 +11,14 @@ material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 100
 infill_sparse_density = 20
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_normal.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_normal.inst.cfg
index 3637b6931d..eace939e15 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_normal.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_0.40_flexible_normal.inst.cfg
@@ -11,14 +11,14 @@ material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 100
 infill_sparse_density = 20
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_coarse.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_coarse.inst.cfg
index 921668e72a..ac68b16751 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_coarse.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 100
 infill_sparse_density = 20
 retraction_amount = 6.0
 retraction_speed = 40
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_draft.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_draft.inst.cfg
index c4a452a8f9..a47ba48b28 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_draft.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_draft.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 100
 infill_sparse_density = 20
 retraction_amount = 6.0
 retraction_speed = 40
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_fine.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_fine.inst.cfg
index e949703d36..95ce01966a 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_fine.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_fine.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 100
 infill_sparse_density = 20
 retraction_amount = 6.0
 retraction_speed = 40
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_normal.inst.cfg b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_normal.inst.cfg
index 041dff6125..33e90d4fd5 100644
--- a/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_normal.inst.cfg
+++ b/resources/quality/xyzprinting/flexible/xyzprinting_da_vinci_super_copper_0.40_flexible_normal.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_flexible
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 100
 infill_sparse_density = 20
 retraction_amount = 6.0
 retraction_speed = 40
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_coarse.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_coarse.inst.cfg
index eeca25e9f5..9f74d44e12 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_coarse.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_draft.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_draft.inst.cfg
index 388df4f66d..69b36f200a 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_draft.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_draft.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_fine.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_fine.inst.cfg
index e646682022..0599ad0013 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_fine.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_fine.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_normal.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_normal.inst.cfg
index 6fbd4067fc..fb4975fab0 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_normal.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_0.40_hs_metallic_normal.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_coarse.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_coarse.inst.cfg
index b1eb6770bc..7358d17420 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_coarse.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_draft.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_draft.inst.cfg
index ab1ab8abff..771a9c9348 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_draft.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_draft.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_fine.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_fine.inst.cfg
index 48fa4f5da0..46f151b4ae 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_fine.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_fine.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_normal.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_normal.inst.cfg
index 9335e3af63..a9fca5b7fe 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_normal.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xeplus_hs_0.40_metallic_normal.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_coarse.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_coarse.inst.cfg
index 12275f5721..ef80690098 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_coarse.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+mmaterial_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_draft.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_draft.inst.cfg
index de704862a8..39eaef259f 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_draft.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_draft.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_fine.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_fine.inst.cfg
index 844747be2e..ce1da40419 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_fine.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_fine.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_normal.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_normal.inst.cfg
index 1f3abfd36d..8681c1d102 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_normal.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_pro_xplus_hs_0.40_metallic_normal.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_coarse.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_coarse.inst.cfg
new file mode 100644
index 0000000000..92ec9f6523
--- /dev/null
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_coarse.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = coarse
+material = xyzprinting_metallic_pla
+variant = Hardened Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_bed_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 120
+retraction_amount = 4.0
+retraction_speed = 40
+skirt_brim_speed = 30
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_draft.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_draft.inst.cfg
new file mode 100644
index 0000000000..1ed6e5c52a
--- /dev/null
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_draft.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Draft Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+material = xyzprinting_metallic_pla
+variant = Hardened Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_bed_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 120
+retraction_amount = 4.0
+retraction_speed = 40
+skirt_brim_speed = 30
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_fine.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_fine.inst.cfg
new file mode 100644
index 0000000000..1121cbaa71
--- /dev/null
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_fine.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Fine Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = fine
+material = xyzprinting_metallic_pla
+variant = Hardened Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_bed_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 120
+retraction_amount = 4.0
+retraction_speed = 40
+skirt_brim_speed = 30
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_normal.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_normal.inst.cfg
new file mode 100644
index 0000000000..c7fd52290f
--- /dev/null
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_jr_w_pro_hs_0.40_metallic_normal.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Normal Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+material = xyzprinting_metallic_pla
+variant = Hardened Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_bed_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 120
+retraction_amount = 4.0
+retraction_speed = 40
+skirt_brim_speed = 30
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_coarse.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_coarse.inst.cfg
index 5cc127a179..06efaa3ef8 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_coarse.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 6.0
-retraction_speed = 30
-skirt_brim_speed = 30
\ No newline at end of file
+retraction_speed = =speed_print
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_draft.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_draft.inst.cfg
index 8a99f6c7eb..3f0b2e4c2f 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_draft.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_draft.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 6.0
-retraction_speed = 30
-skirt_brim_speed = 30
\ No newline at end of file
+retraction_speed = =speed_print
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_fine.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_fine.inst.cfg
index 620c326cf7..5b33e515d6 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_fine.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_fine.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 6.0
-retraction_speed = 30
-skirt_brim_speed = 30
\ No newline at end of file
+retraction_speed = =speed_print
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_normal.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_normal.inst.cfg
index 9a2e4b82ca..28efbb88c8 100644
--- a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_normal.inst.cfg
+++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_super_hs_0.40_metallic_normal.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_metallic_pla
 variant = Hardened Steel 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 6.0
-retraction_speed = 30
-skirt_brim_speed = 30
\ No newline at end of file
+retraction_speed = =speed_print
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_coarse.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_coarse.inst.cfg
index d719c5fde8..428169d66d 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_coarse.inst.cfg
@@ -11,14 +11,14 @@ material = generic_nylon
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 80
-material_bed_temperature_layer_0 = 80
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 255
-material_print_temperature_layer_0 = 255
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 brim_width = 5.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_draft.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_draft.inst.cfg
index 43ca81c7fc..9f8c8cb4f0 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_draft.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_draft.inst.cfg
@@ -11,14 +11,14 @@ material = generic_nylon
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 80
-material_bed_temperature_layer_0 = 80
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 255
-material_print_temperature_layer_0 = 255
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 brim_width = 5.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_fine.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_fine.inst.cfg
index e4e33e86fb..089798bd66 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_fine.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_fine.inst.cfg
@@ -11,14 +11,14 @@ material = generic_nylon
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 80
-material_bed_temperature_layer_0 = 80
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 255
-material_print_temperature_layer_0 = 255
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 brim_width = 5.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_normal.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_normal.inst.cfg
index 466f3f542f..32dbdb7f55 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_normal.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_0.40_copper_nylon_normal.inst.cfg
@@ -11,14 +11,14 @@ material = generic_nylon
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 80
-material_bed_temperature_layer_0 = 80
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 255
-material_print_temperature_layer_0 = 255
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 brim_width = 5.0
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_coarse.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_coarse.inst.cfg
index f6bf6494ff..478ef70db4 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_coarse.inst.cfg
@@ -11,20 +11,18 @@ material = generic_nylon
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 80
-material_bed_temperature_layer_0 = 80
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 255
-material_print_temperature_layer_0 = 255
-material_initial_print_temperature = 255
-material_final_print_temperature = 255
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 8.0
-retraction_speed = 30
-skirt_brim_speed = 30
+retraction_speed = =speed_print
+skirt_brim_speed = =speed_print
 infill_sparse_density = 0
 brim_width = 5.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_draft.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_draft.inst.cfg
index 75b97daad8..54ea0714c2 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_draft.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_draft.inst.cfg
@@ -11,20 +11,18 @@ material = generic_nylon
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 80
-material_bed_temperature_layer_0 = 80
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 255
-material_print_temperature_layer_0 = 255
-material_initial_print_temperature = 255
-material_final_print_temperature = 255
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 8.0
-retraction_speed = 30
-skirt_brim_speed = 30
+retraction_speed = =speed_print
+skirt_brim_speed = =speed_print
 infill_sparse_density = 0
 brim_width = 5.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_fine.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_fine.inst.cfg
index d59017bbfd..332b4331de 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_fine.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_fine.inst.cfg
@@ -11,20 +11,18 @@ material = generic_nylon
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 80
-material_bed_temperature_layer_0 = 80
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 255
-material_print_temperature_layer_0 = 255
-material_initial_print_temperature = 255
-material_final_print_temperature = 255
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 8.0
-retraction_speed = 30
-skirt_brim_speed = 30
+retraction_speed = =speed_print
+skirt_brim_speed = =speed_print
 infill_sparse_density = 0
 brim_width = 5.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_normal.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_normal.inst.cfg
index 1dd598ae88..01248dee03 100644
--- a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_normal.inst.cfg
+++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_super_copper_0.40_nylon_normal.inst.cfg
@@ -11,20 +11,18 @@ material = generic_nylon
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 80
-material_bed_temperature_layer_0 = 80
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 255
-material_print_temperature_layer_0 = 255
-material_initial_print_temperature = 255
-material_final_print_temperature = 255
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 8.0
-retraction_speed = 30
-skirt_brim_speed = 30
+retraction_speed = =speed_print
+skirt_brim_speed = =speed_print
 infill_sparse_density = 0
 brim_width = 5.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_coarse.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_coarse.inst.cfg
index 6b3f78922a..a7fd406a0d 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_coarse.inst.cfg
@@ -11,13 +11,13 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-speed_infill = 60
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_draft.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_draft.inst.cfg
index 5dbb696034..e7996daec7 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_draft.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_draft.inst.cfg
@@ -11,13 +11,13 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-speed_infill = 60
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_fine.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_fine.inst.cfg
index 8c7baeb130..8471ba8f3d 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_fine.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_fine.inst.cfg
@@ -11,13 +11,13 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-speed_infill = 60
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_normal.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_normal.inst.cfg
index 03123f2bdb..9a5c94a4ea 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_normal.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_0.40_copper_petg_normal.inst.cfg
@@ -11,13 +11,13 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-speed_infill = 60
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_coarse.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_coarse.inst.cfg
index de31888641..5a7cc4bd3a 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_coarse.inst.cfg
@@ -11,19 +11,17 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 3.5
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_draft.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_draft.inst.cfg
index 79ee84c808..9a05f63afb 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_draft.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_draft.inst.cfg
@@ -11,19 +11,17 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 3.5
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_fine.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_fine.inst.cfg
index a74b87acd4..256be74cc0 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_fine.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_fine.inst.cfg
@@ -11,19 +11,17 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 3.5
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_normal.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_normal.inst.cfg
index 5bf45c7a2f..71eefd0e06 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_normal.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_petg_normal.inst.cfg
@@ -11,19 +11,17 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 3.5
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_coarse.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_coarse.inst.cfg
index 54d06c64e3..ddf69f02d9 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_coarse.inst.cfg
@@ -11,21 +11,19 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 60
-material_bed_temperature_layer_0 = 60
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 3.5
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_draft.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_draft.inst.cfg
index 6c8da2cdf3..a333f66d60 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_draft.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_draft.inst.cfg
@@ -11,21 +11,19 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 60
-material_bed_temperature_layer_0 = 60
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 3.5
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_fine.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_fine.inst.cfg
index e2f1d4cd47..5f3449fc81 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_fine.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_fine.inst.cfg
@@ -11,21 +11,19 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
-material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature = 60
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 3.5
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_normal.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_normal.inst.cfg
index a4056d9994..5069f85573 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_normal.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_petg_normal.inst.cfg
@@ -11,21 +11,19 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 60
-material_bed_temperature_layer_0 = 60
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 3.5
 retraction_speed = 20
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_coarse.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_coarse.inst.cfg
new file mode 100644
index 0000000000..edf0780ac9
--- /dev/null
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_coarse.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = coarse
+material = generic_petg
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 220
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 50
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_draft.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_draft.inst.cfg
new file mode 100644
index 0000000000..3f17b31e85
--- /dev/null
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_draft.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Draft Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+material = generic_petg
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 220
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 50
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_fine.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_fine.inst.cfg
new file mode 100644
index 0000000000..f7f722d478
--- /dev/null
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_fine.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Fine Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = fine
+material = generic_petg
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 220
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 50
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_normal.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_normal.inst.cfg
new file mode 100644
index 0000000000..815897cb56
--- /dev/null
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_jr_w_pro_ss_0.40_petg_normal.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Normal Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+material = generic_petg
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 220
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 50
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_coarse.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_coarse.inst.cfg
index 457cccf3f1..39a7d1c603 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_coarse.inst.cfg
@@ -11,18 +11,16 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_infill = 60
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 retraction_amount = 4.0
 retraction_speed = 25
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_support
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_draft.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_draft.inst.cfg
index bdf8feb289..188bcc1c78 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_draft.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_draft.inst.cfg
@@ -11,18 +11,16 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_infill = 60
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 retraction_amount = 4.0
 retraction_speed = 25
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_support
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_fine.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_fine.inst.cfg
index e967c62a03..219dbd3fd7 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_fine.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_fine.inst.cfg
@@ -11,18 +11,16 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_infill = 60
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 retraction_amount = 4.0
 retraction_speed = 25
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_support
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_normal.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_normal.inst.cfg
index bb59e41b51..3076c7d4d0 100644
--- a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_normal.inst.cfg
+++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_super_copper_0.40_petg_normal.inst.cfg
@@ -11,18 +11,16 @@ material = generic_petg
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 220
-material_print_temperature_layer_0 = 220
-material_initial_print_temperature = 220
-material_final_print_temperature = 220
-speed_infill = 60
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 60
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 retraction_amount = 4.0
 retraction_speed = 25
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_support
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_coarse.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_coarse.inst.cfg
index 52f18fc93d..134e89ceed 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_coarse.inst.cfg
@@ -11,13 +11,13 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_draft.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_draft.inst.cfg
index ce1b36a236..d73b1bf0db 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_draft.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_draft.inst.cfg
@@ -11,13 +11,12 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
-material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_fine.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_fine.inst.cfg
index 0d772c71ab..a1ae2ab98a 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_fine.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_fine.inst.cfg
@@ -11,13 +11,13 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_normal.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_normal.inst.cfg
index aea4b105d7..3880520dba 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_0.40_copper_pla_normal.inst.cfg
@@ -11,13 +11,13 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_coarse.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_coarse.inst.cfg
index 4d77c727c1..a1cacc1f15 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_coarse.inst.cfg
@@ -11,13 +11,13 @@ material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 24
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 24
-speed_support = 24
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 70
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_draft.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_draft.inst.cfg
index d673cd8d43..d28d33d155 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_draft.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_draft.inst.cfg
@@ -11,13 +11,13 @@ material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 24
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 24
-speed_support = 24
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 70
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_fine.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_fine.inst.cfg
index f4ae267456..a67a176e4b 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_fine.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_fine.inst.cfg
@@ -11,13 +11,13 @@ material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 24
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 24
-speed_support = 24
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 70
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_normal.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_normal.inst.cfg
index 5876f74a9f..c4e6343528 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_0.40_pla_normal.inst.cfg
@@ -11,13 +11,13 @@ material = generic_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 70
-material_bed_temperature_layer_0 = 70
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 24
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 24
-speed_support = 24
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 70
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_coarse.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_coarse.inst.cfg
index 3bc43a6f93..68ea8e3228 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_coarse.inst.cfg
@@ -11,19 +11,17 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_draft.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_draft.inst.cfg
index 58dea2d15f..b6ec76d6d6 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_draft.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_draft.inst.cfg
@@ -11,19 +11,17 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_fine.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_fine.inst.cfg
index 88fd6ec658..71485eb982 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_fine.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_fine.inst.cfg
@@ -11,19 +11,17 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_normal.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_normal.inst.cfg
index d542d29a67..4682155082 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_pla_normal.inst.cfg
@@ -11,19 +11,17 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_coarse.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_coarse.inst.cfg
index 5ce51a9267..9331cc6c10 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_coarse.inst.cfg
@@ -11,21 +11,19 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_draft.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_draft.inst.cfg
index e07085afaa..161df46aed 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_draft.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_draft.inst.cfg
@@ -11,21 +11,19 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_fine.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_fine.inst.cfg
index 75e06584fc..ae086fe232 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_fine.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_fine.inst.cfg
@@ -11,21 +11,19 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_normal.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_normal.inst.cfg
index e841cbfa11..386a7bd082 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_pla_normal.inst.cfg
@@ -11,21 +11,19 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_coarse.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_coarse.inst.cfg
new file mode 100644
index 0000000000..036595d2a4
--- /dev/null
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_coarse.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = coarse
+material = generic_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_draft.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_draft.inst.cfg
new file mode 100644
index 0000000000..64c427b498
--- /dev/null
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_draft.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Draft Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+material = generic_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_fine.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_fine.inst.cfg
new file mode 100644
index 0000000000..2e10025007
--- /dev/null
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_fine.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Fine Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = fine
+material = generic_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_normal.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_normal.inst.cfg
new file mode 100644
index 0000000000..606046bbfd
--- /dev/null
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_pla_normal.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Normal Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+material = generic_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_coarse.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_coarse.inst.cfg
index d4f89c14ef..fe4f303e9d 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_coarse.inst.cfg
@@ -11,18 +11,16 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_prin
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
-retraction_speed = 80
-skirt_brim_speed = 30
\ No newline at end of file
+retraction_speed = 50
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_draft.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_draft.inst.cfg
index bb435de683..f6f1168457 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_draft.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_draft.inst.cfg
@@ -11,18 +11,16 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
-retraction_speed = 80
-skirt_brim_speed = 30
\ No newline at end of file
+retraction_speed = 50
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_fine.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_fine.inst.cfg
index 54b068c8d0..21feaa68f9 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_fine.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_fine.inst.cfg
@@ -11,18 +11,16 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
-retraction_speed = 80
-skirt_brim_speed = 30
+retraction_speed = 50
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_normal.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_normal.inst.cfg
index bf60df401a..1a121dd0d9 100644
--- a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_normal.inst.cfg
@@ -11,18 +11,16 @@ material = generic_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
-retraction_speed = 80
-skirt_brim_speed = 30
\ No newline at end of file
+retraction_speed = 50
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_coarse.inst.cfg
index 818fcf74af..ef9bbf5aaa 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_coarse.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_tough_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = =speed_print
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_draft.inst.cfg
index eefb4009da..5c05ca32e8 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_draft.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_draft.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_tough_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_fine.inst.cfg
index fb49485b93..bd02f02405 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_fine.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_fine.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_tough_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_normal.inst.cfg
index 14e4bc01bf..f1d7a48a52 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_0.40_copper_tough_pla_normal.inst.cfg
@@ -11,13 +11,13 @@ material = xyzprinting_tough_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg
index c85727a1e2..4b1cd2b291 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_coarse.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg
index 931ffb663f..6dda00926e 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_draft.inst.cfg
@@ -11,19 +11,17 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg
index bed7c821e0..fe130b1ca8 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_fine.inst.cfg
@@ -11,20 +11,18 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
 
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg
index 646f54669c..ec0414b5fb 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xeplus_copper_0.40_tough_pla_normal.inst.cfg
@@ -12,19 +12,17 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
+speed_roofing = =speed_print
 speed_infill = 60
-speed_support = 30
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg
index dc5cc397a6..7484afdbad 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_coarse.inst.cfg
@@ -11,20 +11,19 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg
index a03fcc741c..41a9e2da78 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_draft.inst.cfg
@@ -11,21 +11,19 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
\ No newline at end of file
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg
index 6157ed727c..4542105482 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_fine.inst.cfg
@@ -11,21 +11,20 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = 200
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
 
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg
index 289d0092f9..a225ea02a6 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_pro_xplus_copper_0.40_tough_pla_normal.inst.cfg
@@ -12,21 +12,19 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 200
-material_print_temperature_layer_0 = 200
-material_initial_print_temperature = 200
-material_final_print_temperature = 200
-speed_wall = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
+speed_wall = =speed_print
 speed_topbottom = 10 
-speed_roofing = 30
-speed_infill = 30
-speed_support = 30
+speed_roofing = =speed_print
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 7.0
 retraction_speed = 15
-skirt_brim_speed = 30
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg
new file mode 100644
index 0000000000..e6ca74eb86
--- /dev/null
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_coarse.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Coarse Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = coarse
+material = xyzprinting_tough_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 	100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg
new file mode 100644
index 0000000000..6d9b5e18ac
--- /dev/null
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_draft.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Draft Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+material = xyzprinting_tough_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 	100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg
new file mode 100644
index 0000000000..71736416e3
--- /dev/null
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_fine.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Fine Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = fine
+material = xyzprinting_tough_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 	100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg
new file mode 100644
index 0000000000..cc22b6c14c
--- /dev/null
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_jr_w_pro_ss_0.40_tough_pla_normal.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Normal Quality
+definition = xyzprinting_da_vinci_jr_w_pro
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+material = xyzprinting_tough_pla
+variant = Stainless Steel 0.4mm Nozzle
+
+[values]
+material_print_temperature = 210
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
+speed_wall = 30
+speed_print = 30
+speed_topbottom = 10 
+speed_roofing = 30
+speed_infill = =speed_print
+speed_support = =speed_print
+speed_travel = 	100
+retraction_amount = 5.0
+retraction_speed = 30
+skirt_brim_speed = 30
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg
index a42b65c43b..f33ceccce1 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_coarse.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
-retraction_speed = 80
-skirt_brim_speed = 30
\ No newline at end of file
+retraction_speed = 50
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg
index c7a8fd489f..0f9469f4fd 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_draft.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
-retraction_speed = 80
-skirt_brim_speed = 30
\ No newline at end of file
+retraction_speed = 50
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg
index 7455132c5a..76bf909853 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_fine.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
-retraction_speed = 80
-skirt_brim_speed = 30
+retraction_speed = 50
+skirt_brim_speed = =speed_print
diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg
index 3457e46c38..ea7a268293 100644
--- a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_super_copper_0.40_tough_pla_normal.inst.cfg
@@ -11,18 +11,16 @@ material = xyzprinting_tough_pla
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = = aterial_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-material_initial_print_temperature = 210
-material_final_print_temperature = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 5.5
-retraction_speed = 80
-skirt_brim_speed = 30
\ No newline at end of file
+retraction_speed = 50
+skirt_brim_speed = =speed_print
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_coarse.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_coarse.inst.cfg
index 23f99a36ae..c3c7e05480 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_coarse.inst.cfg
@@ -11,14 +11,14 @@ material = xyzprinting_tough_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 15
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 15
+speed_infill =speed_print
 speed_support = 30
 speed_travel = 120
 brim_width = 5.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_draft.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_draft.inst.cfg
index 54f2d7b965..4243ce5809 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_draft.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_draft.inst.cfg
@@ -11,14 +11,14 @@ material = xyzprinting_tough_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 15
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 15
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 brim_width = 5.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_fine.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_fine.inst.cfg
index a13df6eb01..93b329a4dc 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_fine.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_fine.inst.cfg
@@ -11,14 +11,14 @@ material = xyzprinting_tough_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 15
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 15
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 brim_width = 5.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_pla_normal.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_pla_normal.inst.cfg
index f26ab65726..e8afa9915e 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_pla_normal.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_0.40_copper_tpu_pla_normal.inst.cfg
@@ -11,14 +11,14 @@ material = xyzprinting_tough_pla
 variant = 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 15
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 15
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 brim_width = 5.0
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_coarse.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_coarse.inst.cfg
index 8cf13553eb..783810603e 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_coarse.inst.cfg
@@ -11,15 +11,15 @@ material = generic_tpu
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 15
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 15
-speed_support = 15
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 4.0
 retraction_speed = 30
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_draft.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_draft.inst.cfg
index f334cca519..eb7d4b7716 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_draft.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_draft.inst.cfg
@@ -11,15 +11,15 @@ material = generic_tpu
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 15
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 15
-speed_support = 15
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 4.0
 retraction_speed = 30
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_fine.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_fine.inst.cfg
index b7b5a2d81c..54a669bc30 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_fine.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_fine.inst.cfg
@@ -11,15 +11,15 @@ material = generic_tpu
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 15
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 15
-speed_support = 15
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
 retraction_amount = 4.0
 retraction_speed = 30
diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_normal.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_normal.inst.cfg
index 34bb1bc3ed..b965a0bb82 100644
--- a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_normal.inst.cfg
+++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_super_copper_0.40_tpu_normal.inst.cfg
@@ -11,14 +11,14 @@ material = generic_tpu
 variant = Copper 0.4mm Nozzle
 
 [values]
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 material_bed_temperature = 45
-material_bed_temperature_layer_0 = 45
+material_bed_temperature_layer_0 = =material_bed_temperature
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 15
+material_print_temperature_layer_0 = =material_print_temperature
+material_initial_print_temperature = =material_print_temperature
+material_final_print_temperature = =material_print_temperature
 speed_print = 15
+speed_infill = =speed_print
 speed_support = 30
 speed_travel = 120
 retraction_amount = 4.0
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.10_fine.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.10_fine.inst.cfg
index 1ca3778241..e06dead984 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.10_fine.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.10_fine.inst.cfg
@@ -11,17 +11,13 @@ weight = 0
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.10
 layer_height_0 = 0.20
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.20_normal.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.20_normal.inst.cfg
index 527b10d2c4..d61eec0a11 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.20_normal.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.20_normal.inst.cfg
@@ -11,17 +11,13 @@ weight = -1
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.2
 layer_height_0 = 0.35
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.30_draft.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.30_draft.inst.cfg
index d4489125c8..18bbfb6ac5 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.30_draft.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.30_draft.inst.cfg
@@ -11,17 +11,13 @@ weight = -2
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.30
 layer_height_0 = 0.40
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.40_coarse.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.40_coarse.inst.cfg
index 5df474233b..5cddd082d8 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.40_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xeplus_global_0.40_coarse.inst.cfg
@@ -11,17 +11,13 @@ weight = -3
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.4
 layer_height_0 = 0.4
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.10_fine.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.10_fine.inst.cfg
index 0ca03b0b7d..1053451f1c 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.10_fine.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.10_fine.inst.cfg
@@ -11,17 +11,13 @@ weight = 0
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.10
 layer_height_0 = 0.20
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.20_normal.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.20_normal.inst.cfg
index ce83667725..db4ce22b86 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.20_normal.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.20_normal.inst.cfg
@@ -11,17 +11,13 @@ weight = -1
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.2
 layer_height_0 = 0.35
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.30_draft.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.30_draft.inst.cfg
index beac51465b..1aa1a380c5 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.30_draft.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.30_draft.inst.cfg
@@ -11,17 +11,13 @@ weight = -2
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.30
 layer_height_0 = 0.40
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.40_coarse.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.40_coarse.inst.cfg
index 0849adfd89..46888b94ed 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.40_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_jr_pro_xplus_global_0.40_coarse.inst.cfg
@@ -11,17 +11,13 @@ weight = -3
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.4
 layer_height_0 = 0.4
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.10_fine.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.10_fine.inst.cfg
index b0f4d59c13..e556caf2ef 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.10_fine.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.10_fine.inst.cfg
@@ -11,17 +11,13 @@ weight = 0
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.10
 layer_height_0 = 0.20
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.20_normal.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.20_normal.inst.cfg
index 6bf1bdc998..e322fa59e5 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.20_normal.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.20_normal.inst.cfg
@@ -11,17 +11,13 @@ weight = -1
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.2
 layer_height_0 = 0.35
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.30_draft.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.30_draft.inst.cfg
index 5688536431..66b22b721a 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.30_draft.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.30_draft.inst.cfg
@@ -11,17 +11,13 @@ weight = -2
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.30
 layer_height_0 = 0.40
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.40_coarse.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.40_coarse.inst.cfg
index 22ed077db5..fa0a7072e2 100644
--- a/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.40_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_super_global_0.40_coarse.inst.cfg
@@ -11,17 +11,13 @@ weight = -3
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.4
 layer_height_0 = 0.4
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 30
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 30
-speed_support = 30
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 120
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_global_0.10_fine.inst.cfg b/resources/quality/xyzprinting/xyzprinting_global_0.10_fine.inst.cfg
index 4564c5da25..6c3d4ccd17 100644
--- a/resources/quality/xyzprinting/xyzprinting_global_0.10_fine.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_global_0.10_fine.inst.cfg
@@ -11,17 +11,13 @@ weight = 0
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.10
 layer_height_0 = 0.20
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 24
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 24
-speed_support = 24
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 70
diff --git a/resources/quality/xyzprinting/xyzprinting_global_0.20_normal.inst.cfg b/resources/quality/xyzprinting/xyzprinting_global_0.20_normal.inst.cfg
index 93382ffcee..f782ad2a68 100644
--- a/resources/quality/xyzprinting/xyzprinting_global_0.20_normal.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_global_0.20_normal.inst.cfg
@@ -11,17 +11,13 @@ weight = -1
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.2
 layer_height_0 = 0.3
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 24
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 24
-speed_support = 24
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 70
\ No newline at end of file
diff --git a/resources/quality/xyzprinting/xyzprinting_global_0.30_draft.inst.cfg b/resources/quality/xyzprinting/xyzprinting_global_0.30_draft.inst.cfg
index 3721cf5823..2628afc5db 100644
--- a/resources/quality/xyzprinting/xyzprinting_global_0.30_draft.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_global_0.30_draft.inst.cfg
@@ -11,17 +11,13 @@ weight = -2
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.30
 layer_height_0 = 0.40
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 24
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 24
-speed_support = 24
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 70
diff --git a/resources/quality/xyzprinting/xyzprinting_global_0.40_coarse.inst.cfg b/resources/quality/xyzprinting/xyzprinting_global_0.40_coarse.inst.cfg
index aa68b25670..256b8fdd62 100644
--- a/resources/quality/xyzprinting/xyzprinting_global_0.40_coarse.inst.cfg
+++ b/resources/quality/xyzprinting/xyzprinting_global_0.40_coarse.inst.cfg
@@ -11,17 +11,13 @@ weight = -3
 global_quality = True
 
 [values]
-adhesion_type = brim
-brim_width = 10.0
-cool_fan_speed = 100
-cool_fan_speed_0 = 0
 layer_height = 0.4
 layer_height_0 = 0.4
 material_bed_temperature = 40
 material_diameter = 1.75
 material_print_temperature = 210
-material_print_temperature_layer_0 = 210
-speed_infill = 24
+material_print_temperature_layer_0 = =material_print_temperature
 speed_print = 24
-speed_support = 24
+speed_infill = =speed_print
+speed_support = =speed_print
 speed_travel = 70