Cleaned up of the support settings for the UM2+C quality modes.

Relates to PP-108

30 files changed, 0 insertions, 68 deletions

diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
index b3c245146d..076caebf21 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
@@ -35,7 +35,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
index 3b2b1651c7..eb2eb45552 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
@@ -35,7 +35,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 speed_wall_x = =math.ceil(speed_print * 30 / 35)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
index 8cb20a1905..255979e3a6 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
@@ -37,9 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 2.85
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
index 712fe966a1..88eda6c8ec 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
@@ -37,9 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 35)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 2.85
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
index 24d7ba3435..9d7a3851d8 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
@@ -33,8 +33,6 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 25)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2
 retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
index 2e23cfa5c6..4801f03a05 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
@@ -33,8 +33,6 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 speed_wall_x = =speed_print
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2
 retraction_combing_max_distance = 50
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
index 7f1be7c53c..f08257d7d6 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
@@ -34,9 +34,6 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =speed_print
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 40 / 40)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
index 27d4cd0876..ab17f0589d 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
@@ -34,8 +34,5 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =speed_print
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
index 2a5a24d792..d23859a47f 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
@@ -34,9 +34,6 @@ speed_travel = 150
 speed_wall = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 0.75
 speed_wall_0 = =math.ceil(speed_print * 30 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
index 551a9193de..e5d05294f2 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
@@ -33,8 +33,5 @@ speed_travel = 150
 speed_wall = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 0.75
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
index 2f1a81e06d..5d2bd1ff90 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
@@ -38,10 +38,7 @@ speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_bottom_distance = 0.55
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
 support_top_distance = 0.55
-support_xy_distance = 0.7
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 55 / 55)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
index 0523c4ec2e..25480e1e7d 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
@@ -37,8 +37,5 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
-support_xy_distance = 0.7
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
index d8a8945550..3e0c8530f3 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
@@ -36,9 +36,6 @@ speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_bottom_distance = 0.65
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
 support_top_distance = 0.5
-support_xy_distance = 0.75
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
index bec740338f..9ac5d56bd7 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
@@ -36,9 +36,6 @@ speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
 support_bottom_distance = 0.65
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_pattern = lines
 support_top_distance = 0.5
-support_xy_distance = 0.75
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
index 9688da7046..4898c72327 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
@@ -30,7 +30,5 @@ raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
 speed_topbottom = =math.ceil(speed_print * 15 / 30)
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
index a905fd96d2..2d159792c9 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
@@ -30,6 +30,4 @@ raft_surface_line_width = 0.2
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
index 970ff5f134..86a965d441 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
@@ -31,8 +31,6 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 45)
 speed_wall_x = =math.ceil(speed_print * 30 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_infill = =math.ceil(speed_print * 45 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
index 0066aa16b4..b782ea63d4 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
@@ -31,6 +31,4 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 45)
 speed_wall_x = =math.ceil(speed_print * 30 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.19
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
index 2438f341df..739d72072f 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
@@ -35,9 +35,6 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 3.5333
-support_pattern = lines
 support_z_distance = 0.21
 top_bottom_thickness = 0.75
 speed_infill = =math.ceil(speed_print * 45 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
index 3a139dc3cb..d95596953e 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
@@ -35,8 +35,5 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 20
-support_line_distance = 3.5333
-support_pattern = lines
 support_z_distance = 0.21
 top_bottom_thickness = 0.75
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
index 4cf4438216..751696ca93 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
@@ -30,7 +30,5 @@ speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_structure == 'tree' else 20
-support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
index 4f67fa891d..56784dde18 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
@@ -48,7 +48,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 travel_avoid_distance = 3
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
index 6c39f15e6d..dd46b498a6 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
@@ -48,7 +48,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 travel_avoid_distance = 3
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
index 578b7615b5..7a74d35fa1 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
@@ -47,7 +47,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.1
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
index d39191f6d5..c2a99e450c 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
@@ -47,7 +47,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.1
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
index b2c62ba2b4..36c6cc7014 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
@@ -57,7 +57,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.5
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
index 35b5f52e1e..8f970dd37f 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
@@ -48,7 +48,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.5
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
index 169b990d3d..42c185a769 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
@@ -36,8 +36,6 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 40)
 speed_wall_x = =math.ceil(speed_print * 38 / 40)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_xy_distance = 0.6
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 40 / 40)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
index b822d913b3..acf28f2ad3 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
@@ -34,7 +34,5 @@ speed_wall_0 = =math.ceil(speed_print * 20 / 40)
 speed_wall_x = =math.ceil(speed_print * 35 / 40)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_enable and support_structure == 'tree' else 25
-support_xy_distance = 0.65
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
index 941f119653..db3a812f97 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
@@ -37,8 +37,6 @@ speed_wall_0 = =math.ceil(speed_print * 15 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 support_angle = 45
 support_enable = True
-support_infill_rate = =0 if support_structure == 'tree' else 25
-support_xy_distance = 0.7
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 45 / 45)