Updates acceleration settings to a max of 3500mmps2

And increases minimum to 1000mmps2.

48 files changed, 0 insertions, 96 deletions

diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
index d709092cf0..43548ae864 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -13,8 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
index a6f33ebf61..000e271b14 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
@@ -13,8 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 10
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 5
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
index 9f7942674b..f3d45432c3 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 80
 cool_min_speed = 5
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
index 356f8e24b7..b7a112a228 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 80
 cool_min_speed = 6
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
index b2cbe677ca..b3ee2c98b8 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 50
 cool_min_speed = 5
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
index 5ab06b36cb..8dd6278d5c 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 50
 cool_min_speed = 7
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
index 8019b4ea65..3877cd9fbc 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = raft
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
index 179bbe2a83..b9c8c4d224 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = raft
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
index 76f6235728..a24eb1127b 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = raft
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
index 2c5a97a7e4..e97c40e61d 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = raft
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
index 4c3b37375c..95de9768a6 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
index 2fa6c35c0a..f576339a7e 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
index ba5e6db078..2ac4a3dcb9 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
index 14aefd647c..98745c8801 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
index 1b20c8c454..7c2c01c13c 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
index 42c4a94179..5b0211a743 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
index edb5751e06..245f19fb7c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -13,8 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
index 17131e9397..0d0fc4df75 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
@@ -13,8 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 10
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 5
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
index 16adc37587..286e2da004 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 80
 cool_min_speed = 5
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
index 086927544d..70c710da88 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 80
 cool_min_speed = 6
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
index c82a701e4b..0c5d20e570 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 50
 cool_min_speed = 5
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
index 0d116eb04e..ab8735ca06 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 50
 cool_min_speed = 7
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
index 5637f57c13..7a4894f065 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
index 6a79f242b9..460672ac0f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
index 6a08b61393..77b5bc8ee4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
index 37167b4890..77f1c1659f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
index 2132288bfe..20eb2c084b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
index ca0e648e7c..1e2927b94a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
index 3569786c19..62d45c44ed 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
index 522a574315..585e77b07f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
index 85b643be83..0edd73415c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
index 8d4d0a2be8..83cfa8b4f7 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index 9528a81950..4d6e63f717 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -13,8 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
index ce92209489..665bcdb56e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
@@ -13,8 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 10
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 5
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
index fbdb5dfb08..c434ca1ebe 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 80
 cool_min_speed = 5
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
index 02d70b8418..2b1f8dad32 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 80
 cool_min_speed = 6
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
index 7f391f689f..cd034f531a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 50
 cool_min_speed = 5
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
index 3148b99c74..1ba548fc58 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_cpe_plus
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 cool_fan_speed_max = 50
 cool_min_speed = 7
 infill_line_width = =round(line_width * 0.35 / 0.35, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index 915c5d624e..b962c495ac 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index c934e66e1d..39b6950cd4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index 1b2fe478b2..813f8e47b9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index 7049f8601d..f257b35f2e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
index 6ebb81c560..4135680fb3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
index 9d4a379bd6..c1b687c61a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
index 959d3199d0..7900ed2944 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_pp
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 20
 cool_fan_speed_max = 100
 cool_min_layer_time = 7
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
index f2f557b8b8..05b8d39dcd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
index 78592d5de2..e0836510d7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
index 1a81413d39..48227c0a1a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -12,8 +12,6 @@ material = generic_tpu
 variant = AA 0.4
 
 [values]
-acceleration_enabled = True
-acceleration_print = 4000
 brim_width = 8.75
 cool_fan_speed_max = 100
 cool_min_layer_time_fan_speed_max = 6