diff options
author | Ghostkeeper <rubend@tutanota.com> | 2019-09-04 10:23:27 +0300 |
---|---|---|
committer | Ghostkeeper <rubend@tutanota.com> | 2019-09-04 10:23:27 +0300 |
commit | 52cb68fdb38dda18c9a9f7e854509dd9d7a1d7d3 (patch) | |
tree | 3aec1ebd4fe6024739f06989977a61416d1f936c /resources/quality | |
parent | de7915688aa382bf0db1992539a7e93d84abe3f9 (diff) |
Commit actual files instead of my symlinks
I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git.
Contributes to issue CURA-6742.
Diffstat (limited to 'resources/quality')
91 files changed, 3324 insertions, 1 deletions
diff --git a/resources/quality/ultimaker_s3 b/resources/quality/ultimaker_s3 deleted file mode 120000 index f2a52666c7..0000000000 --- a/resources/quality/ultimaker_s3 +++ /dev/null @@ -1 +0,0 @@ -/home/ruben/Projects/cura-private-data/resources/quality/ultimaker_s3
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..3116222771 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg @@ -0,0 +1,20 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_abs +variant = AA 0.25 + +[values] +cool_fan_speed = 40 +infill_overlap = 15 +material_final_print_temperature = =material_print_temperature - 5 +retraction_prime_speed = 25 +speed_topbottom = =math.ceil(speed_print * 30 / 55) +wall_thickness = 0.92 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..350985ef89 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg @@ -0,0 +1,20 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_cpe +variant = AA 0.25 + +[values] +retraction_combing_max_distance = 50 +retraction_extrusion_window = 0.5 +speed_infill = =math.ceil(speed_print * 40 / 55) +speed_topbottom = =math.ceil(speed_print * 30 / 55) +top_bottom_thickness = 0.8 +wall_thickness = 0.92
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..882bb06cd4 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_nylon +variant = AA 0.25 + +[values] +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 12 +infill_line_width = =round(line_width * 0.5 / 0.4, 2) +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 +ooze_shield_angle = 40 +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 3) +raft_jerk = =jerk_layer_0 +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +retraction_min_travel = 5 +skin_overlap = 50 +speed_print = 70 +speed_topbottom = =math.ceil(speed_print * 30 / 70) +speed_wall = =math.ceil(speed_print * 30 / 70) +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 +wall_line_width_x = =wall_line_width diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..5e34121579 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -0,0 +1,55 @@ +[general] +version = 4 +name = Fine - Experimental +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_pc +variant = AA 0.25 +is_experimental = True + +[values] +acceleration_enabled = True +acceleration_print = 4000 +adhesion_type = brim +brim_width = 20 +cool_fan_full_at_height = =layer_height_0 + layer_height +cool_fan_speed_max = 50 +cool_min_layer_time_fan_speed_max = 5 +cool_min_speed = 5 +infill_line_width = =line_width +infill_pattern = triangles +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +machine_min_cool_heat_time_window = 15 +multiple_mesh_overlap = 0 +ooze_shield_angle = 40 +prime_tower_enable = True +prime_tower_wipe_enabled = True +raft_airgap = 0.25 +raft_interface_thickness = =max(layer_height * 1.5, 0.225) +retraction_count_max = 80 +retraction_hop = 2 +retraction_hop_only_when_collides = True +retraction_min_travel = 0.8 +retraction_prime_speed = 15 +skin_overlap = 30 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 25 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 25 / 40) +support_bottom_distance = =support_z_distance +support_interface_density = 87.5 +support_interface_pattern = lines +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +wall_0_inset = 0 +wall_line_width_x = =line_width +wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..b216eac68a --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_pla +variant = AA 0.25 + +[values] +brim_width = 8 +cool_fan_full_at_height = =layer_height_0 +cool_min_speed = 10 +infill_overlap = 10 +infill_pattern = grid +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = 190 +retraction_hop = 0.2 +skin_overlap = 5 +speed_layer_0 = =speed_print +speed_print = 30 +speed_travel_layer_0 = 120 +speed_wall = =math.ceil(speed_print * 25 / 30) +speed_wall_0 = =math.ceil(speed_print * 20 / 30) +top_bottom_thickness = 0.72 +travel_avoid_distance = 0.4 +wall_0_inset = 0.015 +wall_0_wipe_dist = 0.25 +wall_thickness = 0.7 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..32c40c3787 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -0,0 +1,59 @@ +[general] +version = 4 +name = Fine - Experimental +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_pp +variant = AA 0.25 +is_experimental = True + +[values] +acceleration_enabled = True +acceleration_print = 4000 +brim_width = 10 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 5 +cool_min_speed = 2.5 +infill_line_width = =round(line_width * 0.38 / 0.38, 2) +infill_pattern = tetrahedral +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +line_width = =machine_nozzle_size * 0.92 +machine_min_cool_heat_time_window = 15 +material_bed_temperature_layer_0 = =material_bed_temperature + 5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature_layer_0 = =material_print_temperature + 3 +multiple_mesh_overlap = 0 +prime_tower_enable = False +prime_tower_size = 16 +prime_tower_wipe_enabled = True +retraction_count_max = 6 +retraction_extra_prime_amount = 0.2 +retraction_extrusion_window = 6.5 +retraction_hop = 2 +retraction_hop_only_when_collides = True +retraction_min_travel = 0.8 +retraction_prime_speed = 13 +speed_equalize_flow_enabled = True +speed_layer_0 = =math.ceil(speed_print * 15 / 25) +speed_print = 25 +speed_travel_layer_0 = 50 +speed_wall = =math.ceil(speed_print * 25 / 25) +speed_wall_0 = =math.ceil(speed_wall * 25 / 25) +support_angle = 50 +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +top_bottom_thickness = 1 +travel_avoid_distance = 3 +wall_0_inset = 0 +wall_line_width_x = =line_width +wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..bc04462e00 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg @@ -0,0 +1,40 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_tough_pla +variant = AA 0.25 + +[values] +brim_width = 8 +cool_fan_full_at_height = =layer_height_0 +cool_min_speed = 7 +infill_line_width = =line_width +infill_overlap = 10 +infill_pattern = grid +line_width = =machine_nozzle_size * 0.92 +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = =default_material_print_temperature - 15 +skin_overlap = 5 +speed_layer_0 = =math.ceil(speed_print * 30 / 30) +speed_print = 30 +speed_topbottom = =math.ceil(speed_print * 20 / 30) +speed_travel_layer_0 = 120 +speed_wall = =math.ceil(speed_print * 25 / 30) +speed_wall_0 = =math.ceil(speed_print * 20 / 30) +top_bottom_thickness = 0.72 +wall_0_inset = 0.015 +wall_0_wipe_dist = 0.25 +wall_line_width = =line_width +wall_line_width_x= =line_width +wall_thickness = 0.7 + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg new file mode 100644 index 0000000000..7ffab11e22 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_abs +variant = AA 0.4 + +[values] +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature + 20 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 +prime_tower_enable = False +skin_overlap = 20 +speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_topbottom = =math.ceil(speed_print * 35 / 60) +speed_wall = =math.ceil(speed_print * 45 / 60) +speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +wall_thickness = 1 + +infill_line_width = =round(line_width * 0.4 / 0.35, 2) +speed_infill = =math.ceil(speed_print * 50 / 60) + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg new file mode 100644 index 0000000000..e5fd572624 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg @@ -0,0 +1,30 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_abs +variant = AA 0.4 + +[values] +cool_min_speed = 7 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature + 15 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 +prime_tower_enable = False +speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_topbottom = =math.ceil(speed_print * 30 / 60) +speed_wall = =math.ceil(speed_print * 40 / 60) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + +infill_line_width = =round(line_width * 0.4 / 0.35, 2) +speed_infill = =math.ceil(speed_print * 45 / 60) + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg new file mode 100644 index 0000000000..8ec152171b --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg @@ -0,0 +1,29 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = high +weight = 1 +material = generic_abs +variant = AA 0.4 + +[values] +cool_min_speed = 12 +machine_nozzle_cool_down_speed = 0.8 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 +prime_tower_enable = False +speed_print = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 30 / 50) + +infill_line_width = =round(line_width * 0.4 / 0.35, 2) +speed_infill = =math.ceil(speed_print * 40 / 50) + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..4f9a156b22 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -0,0 +1,27 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_abs +variant = AA 0.4 + +[values] +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature + 10 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 +prime_tower_enable = False +speed_print = 55 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) +speed_topbottom = =math.ceil(speed_print * 30 / 55) +speed_wall = =math.ceil(speed_print * 30 / 55) + +infill_line_width = =round(line_width * 0.4 / 0.35, 2) +speed_infill = =math.ceil(speed_print * 40 / 55) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg new file mode 100644 index 0000000000..98e79c0475 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg @@ -0,0 +1,40 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_bam +variant = AA 0.4 + +[values] +brim_replaces_support = False +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature + 5 +# prime_tower_enable: see CURA-4248 +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +skin_overlap = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_topbottom = =math.ceil(speed_print * 35 / 70) +speed_wall = =math.ceil(speed_print * 50 / 70) +speed_wall_0 = =math.ceil(speed_wall * 35 / 50) +top_bottom_thickness = 1 +wall_thickness = 1 +support_brim_enable = True +support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) +support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' +support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_angle = 45 +support_join_distance = 5 +support_offset = 2 +support_pattern = triangles +support_infill_rate = =10 if support_enable else 0 if support_tree_enable else 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg new file mode 100644 index 0000000000..10b8791943 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_bam +variant = AA 0.4 + +[values] +brim_replaces_support = False +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +# prime_tower_enable: see CURA-4248 +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +speed_print = 80 +speed_layer_0 = =math.ceil(speed_print * 20 / 80) +speed_topbottom = =math.ceil(speed_print * 30 / 80) +speed_wall = =math.ceil(speed_print * 40 / 80) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +top_bottom_thickness = 1 +wall_thickness = 1 +support_brim_enable = True +support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) +support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' +support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_angle = 45 +support_join_distance = 5 +support_offset = 2 +support_pattern = triangles +support_infill_rate = =10 if support_enable else 0 if support_tree_enable else 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..00c8f60b74 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -0,0 +1,38 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_bam +variant = AA 0.4 + +[values] +brim_replaces_support = False +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +cool_min_speed = 7 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature - 10 +# prime_tower_enable: see CURA-4248 +prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +skin_overlap = 10 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +support_brim_enable = True +support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) +support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric' +support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_angle = 45 +support_join_distance = 5 +support_offset = 2 +support_pattern = triangles +support_infill_rate = =10 if support_enable else 0 if support_tree_enable else 10 +top_bottom_thickness = 1 +wall_thickness = 1 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg new file mode 100644 index 0000000000..4e6feee81a --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_cpe_plus +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +cool_fan_speed_max = 80 +cool_min_speed = 5 +infill_line_width = =round(line_width * 0.35 / 0.35, 2) +infill_overlap = 0 +infill_wipe_dist = 0 +jerk_enabled = True +jerk_print = 25 +machine_min_cool_heat_time_window = 15 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =material_print_temperature +multiple_mesh_overlap = 0 +prime_tower_enable = True +prime_tower_wipe_enabled = True +retraction_combing_max_distance = 50 +retraction_extrusion_window = 1 +retraction_hop = 0.2 +retraction_hop_enabled = False +retraction_hop_only_when_collides = True +skin_overlap = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 40 / 50) + +speed_wall = =math.ceil(speed_print * 50 / 50) +speed_wall_0 = =math.ceil(speed_wall * 40 / 50) +support_bottom_distance = =support_z_distance +support_z_distance = =layer_height +wall_0_inset = 0 +wall_thickness = 1 + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg new file mode 100644 index 0000000000..49fcd51a8f --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -0,0 +1,46 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_cpe_plus +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +cool_fan_speed_max = 80 +cool_min_speed = 6 +infill_line_width = =round(line_width * 0.35 / 0.35, 2) +infill_overlap = 0 +infill_wipe_dist = 0 +jerk_enabled = True +jerk_print = 25 +machine_min_cool_heat_time_window = 15 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 10 +material_print_temperature_layer_0 = =material_print_temperature +multiple_mesh_overlap = 0 +prime_tower_enable = True +prime_tower_wipe_enabled = True +retraction_combing_max_distance = 50 +retraction_extrusion_window = 1 +retraction_hop = 0.2 +retraction_hop_enabled = False +retraction_hop_only_when_collides = True +skin_overlap = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) + +speed_wall = =math.ceil(speed_print * 45 / 45) +speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +support_bottom_distance = =support_z_distance +support_z_distance = =layer_height +wall_0_inset = 0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg new file mode 100644 index 0000000000..6e0408d82d --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = high +weight = 1 +material = generic_cpe_plus +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +cool_fan_speed_max = 50 +cool_min_speed = 5 +infill_line_width = =round(line_width * 0.35 / 0.35, 2) +infill_overlap = 0 +infill_wipe_dist = 0 +jerk_enabled = True +jerk_print = 25 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature_layer_0 = =material_print_temperature +multiple_mesh_overlap = 0 +prime_tower_enable = True +prime_tower_wipe_enabled = True +retraction_combing_max_distance = 50 +retraction_extrusion_window = 1 +retraction_hop = 0.2 +retraction_hop_enabled = False +retraction_hop_only_when_collides = True +skin_overlap = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 40) +speed_print = 40 +speed_topbottom = =math.ceil(speed_print * 30 / 35) + +speed_wall = =math.ceil(speed_print * 35 / 40) +speed_wall_0 = =math.ceil(speed_wall * 30 / 35) +support_bottom_distance = =support_z_distance +support_z_distance = =layer_height +wall_0_inset = 0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..e24a84d32b --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -0,0 +1,48 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_cpe_plus +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +cool_fan_speed_max = 50 +cool_min_speed = 7 +infill_line_width = =round(line_width * 0.35 / 0.35, 2) +infill_overlap = 0 +infill_wipe_dist = 0 +jerk_enabled = True +jerk_print = 25 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =material_print_temperature +multiple_mesh_overlap = 0 +prime_tower_enable = True +prime_tower_wipe_enabled = True +retraction_combing_max_distance = 50 +retraction_extrusion_window = 1 +retraction_hop = 0.2 +retraction_hop_enabled = False +retraction_hop_only_when_collides = True +skin_overlap = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 40) +speed_print = 40 +speed_topbottom = =math.ceil(speed_print * 30 / 35) + +speed_wall = =math.ceil(speed_print * 35 / 40) +speed_wall_0 = =math.ceil(speed_wall * 30 / 35) +support_bottom_distance = =support_z_distance +support_z_distance = =layer_height +wall_0_inset = 0 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg new file mode 100644 index 0000000000..284cef4107 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg @@ -0,0 +1,29 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_cpe +variant = AA 0.4 + +[values] +material_print_temperature = =default_material_print_temperature + 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 +retraction_combing_max_distance = 50 +skin_overlap = 20 +speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_topbottom = =math.ceil(speed_print * 35 / 60) +speed_wall = =math.ceil(speed_print * 45 / 60) +speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +wall_thickness = 1 + + +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg new file mode 100644 index 0000000000..487ad68099 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg @@ -0,0 +1,27 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_cpe +variant = AA 0.4 + +[values] +cool_min_speed = 7 +material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 +retraction_combing_max_distance = 50 +speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) +speed_topbottom = =math.ceil(speed_print * 30 / 60) +speed_wall = =math.ceil(speed_print * 40 / 60) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 50 / 60)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg new file mode 100644 index 0000000000..9de2de588e --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg @@ -0,0 +1,28 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = high +weight = 1 +material = generic_cpe +variant = AA 0.4 + +[values] +cool_min_speed = 12 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 +retraction_combing_max_distance = 50 +speed_print = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 30 / 50) + +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 40 / 50)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..0cfa9778ff --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -0,0 +1,26 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_cpe +variant = AA 0.4 + +[values] +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 +retraction_combing_max_distance = 50 +speed_print = 55 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) +speed_topbottom = =math.ceil(speed_print * 30 / 55) +speed_wall = =math.ceil(speed_print * 30 / 55) + +infill_pattern = triangles +speed_infill = =math.ceil(speed_print * 45 / 55)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg new file mode 100644 index 0000000000..98ae2900f7 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -0,0 +1,38 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_nylon +variant = AA 0.4 + +[values] +adhesion_type = brim +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 10 +infill_line_width = =round(line_width * 0.5 / 0.4, 2) +line_width = =machine_nozzle_size +material_print_temperature = =default_material_print_temperature + 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 +material_standby_temperature = 100 +ooze_shield_angle = 40 +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +skin_overlap = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 +wall_line_width_x = =wall_line_width + +jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg new file mode 100644 index 0000000000..afe5c03f8e --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -0,0 +1,38 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_nylon +variant = AA 0.4 + +[values] +adhesion_type = brim +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 10 +infill_line_width = =round(line_width * 0.5 / 0.4, 2) +line_width = =machine_nozzle_size +material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 +material_standby_temperature = 100 +ooze_shield_angle = 40 +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +skin_overlap = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 +wall_line_width_x = =wall_line_width + +jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg new file mode 100644 index 0000000000..64a8dfe7cf --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -0,0 +1,37 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = high +weight = 1 +material = generic_nylon +variant = AA 0.4 + +[values] +adhesion_type = brim +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 15 +infill_line_width = =round(line_width * 0.5 / 0.4, 2) +line_width = =machine_nozzle_size +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 +material_standby_temperature = 100 +ooze_shield_angle = 40 +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +skin_overlap = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 +wall_line_width_x = =wall_line_width + +jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..3ee447eb2d --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -0,0 +1,37 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_nylon +variant = AA 0.4 + +[values] +adhesion_type = brim +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 12 +infill_line_width = =round(line_width * 0.5 / 0.4, 2) +line_width = =machine_nozzle_size +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 +material_standby_temperature = 100 +ooze_shield_angle = 40 +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_jerk = =jerk_layer_0 +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +skin_overlap = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 +wall_line_width_x = =wall_line_width + +jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg new file mode 100644 index 0000000000..63985bfcd2 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg @@ -0,0 +1,63 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_pc +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +adhesion_type = brim +brim_width = 20 +cool_fan_full_at_height = =layer_height_0 + layer_height +cool_fan_speed_max = 90 +cool_min_layer_time_fan_speed_max = 5 +cool_min_speed = 6 +infill_line_width = =round(line_width * 0.4 / 0.35, 2) +infill_overlap = 0 +infill_overlap_mm = 0.05 +infill_pattern = triangles +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 10 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +ooze_shield_angle = 40 +prime_tower_enable = True +prime_tower_wipe_enabled = True +raft_airgap = 0.25 +raft_interface_thickness = =max(layer_height * 1.5, 0.225) +retraction_count_max = 80 +retraction_extrusion_window = 1 +retraction_hop = 2 +retraction_hop_only_when_collides = True +retraction_min_travel = 0.8 +retraction_prime_speed = 15 +skin_overlap = 30 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 25 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 25 / 40) +support_bottom_distance = =support_z_distance +support_interface_density = 87.5 +support_interface_pattern = lines +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +wall_0_inset = 0 +wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) +wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg new file mode 100644 index 0000000000..548cdbdb0d --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg @@ -0,0 +1,63 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_pc +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +adhesion_type = brim +brim_width = 20 +cool_fan_full_at_height = =layer_height_0 + layer_height +cool_fan_speed_max = 85 +cool_min_layer_time_fan_speed_max = 5 +cool_min_speed = 7 +infill_line_width = =round(line_width * 0.4 / 0.35, 2) +infill_overlap_mm = 0.05 +infill_pattern = triangles +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature + 10 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +ooze_shield_angle = 40 +prime_tower_enable = True +prime_tower_wipe_enabled = True +raft_airgap = 0.25 +raft_interface_thickness = =max(layer_height * 1.5, 0.225) +retraction_count_max = 80 +retraction_extrusion_window = 1 +retraction_hop = 2 +retraction_hop_only_when_collides = True +retraction_min_travel = 0.8 +retraction_prime_speed = 15 +skin_overlap = 30 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 25 / 50) + +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 25 / 40) +support_bottom_distance = =support_z_distance +support_interface_density = 87.5 +support_interface_pattern = lines +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +wall_0_inset = 0 +wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) +wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg new file mode 100644 index 0000000000..f840c296b4 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -0,0 +1,64 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = high +weight = 1 +material = generic_pc +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +adhesion_type = brim +brim_width = 20 +cool_fan_full_at_height = =layer_height_0 + layer_height +cool_fan_speed_max = 50 +cool_min_layer_time_fan_speed_max = 5 +cool_min_speed = 8 +infill_line_width = =round(line_width * 0.4 / 0.35, 2) +infill_overlap = 0 +infill_overlap_mm = 0.05 +infill_pattern = triangles +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 10 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +ooze_shield_angle = 40 +prime_tower_enable = True +prime_tower_wipe_enabled = True +raft_airgap = 0.25 +raft_interface_thickness = =max(layer_height * 1.5, 0.225) +retraction_count_max = 80 +retraction_extrusion_window = 1 +retraction_hop = 2 +retraction_hop_only_when_collides = True +retraction_min_travel = 0.8 +retraction_prime_speed = 15 +skin_overlap = 30 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 25 / 50) + +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 25 / 40) +support_bottom_distance = =support_z_distance +support_interface_density = 87.5 +support_interface_pattern = lines +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +wall_0_inset = 0 +wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) +wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..c93903293e --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -0,0 +1,62 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_pc +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +adhesion_type = brim +brim_width = 20 +cool_fan_full_at_height = =layer_height_0 + layer_height +cool_fan_speed_max = 50 +cool_min_layer_time_fan_speed_max = 5 +cool_min_speed = 5 +infill_line_width = =round(line_width * 0.4 / 0.35, 2) +infill_overlap = 0 +infill_pattern = triangles +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +ooze_shield_angle = 40 +prime_tower_enable = True +prime_tower_wipe_enabled = True +raft_airgap = 0.25 +raft_interface_thickness = =max(layer_height * 1.5, 0.225) +retraction_count_max = 80 +retraction_extrusion_window = 1 +retraction_hop = 2 +retraction_hop_only_when_collides = True +retraction_min_travel = 0.8 +retraction_prime_speed = 15 +skin_overlap = 30 +speed_layer_0 = =math.ceil(speed_print * 25 / 50) +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 25 / 50) + +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 25 / 40) +support_bottom_distance = =support_z_distance +support_interface_density = 87.5 +support_interface_pattern = lines +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +wall_0_inset = 0 +wall_line_width_x = =round(line_width * 0.4 / 0.35, 2) +wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg new file mode 100644 index 0000000000..1dfa09e923 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_pla +variant = AA 0.4 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature + 5 +material_standby_temperature = 100 +prime_tower_enable = False +skin_overlap = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_topbottom = =math.ceil(speed_print * 40 / 70) +speed_wall = =math.ceil(speed_print * 55 / 70) +speed_wall_0 = =math.ceil(speed_wall * 45 / 50) +top_bottom_thickness = 0.8 +wall_thickness = 0.8 + +jerk_travel = 50 +infill_line_width = =round(line_width * 0.42 / 0.35, 2) +infill_sparse_density = 15 +layer_height_0 = 0.2 +acceleration_wall = 2000 +acceleration_wall_0 = 2000 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg new file mode 100644 index 0000000000..1c2b49839e --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_pla +variant = AA 0.4 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_standby_temperature = 100 +prime_tower_enable = False +speed_print = 70 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +speed_topbottom = =math.ceil(speed_print * 35 / 70) +speed_wall = =math.ceil(speed_print * 45 / 70) +speed_wall_0 = =math.ceil(speed_wall * 35 / 70) +top_bottom_thickness = 1 +wall_thickness = 1 + +jerk_travel = 50 +infill_line_width = =round(line_width * 0.42 / 0.35, 2) +layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg new file mode 100644 index 0000000000..8863835f09 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = high +weight = 1 +material = generic_pla +variant = AA 0.4 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +cool_min_speed = 10 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature - 5 +material_standby_temperature = 100 +prime_tower_enable = False +skin_overlap = 10 +speed_print = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_topbottom = =math.ceil(speed_print * 35 / 50) +speed_wall = =math.ceil(speed_print * 35 / 50) +top_bottom_thickness = 1 +wall_thickness = 1 + +jerk_travel = 50 +infill_line_width = =round(line_width * 0.42 / 0.35, 2) +layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..1cf0cbef92 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -0,0 +1,29 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_pla +variant = AA 0.4 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +cool_min_speed = 7 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_standby_temperature = 100 +prime_tower_enable = False +skin_overlap = 10 +speed_layer_0 = =math.ceil(speed_print * 20 / 70) +top_bottom_thickness = 1 +wall_thickness = 1 + +jerk_travel = 50 +infill_line_width = =round(line_width * 0.42 / 0.35, 2) +layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg new file mode 100644 index 0000000000..dc46520c97 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -0,0 +1,62 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_pp +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +brim_width = 20 +cool_fan_speed_max = 100 +cool_min_layer_time = 7 +cool_min_layer_time_fan_speed_max = 7 +cool_min_speed = 2.5 +infill_line_width = =round(line_width * 0.38 / 0.38, 2) +infill_overlap = 0 +infill_pattern = tetrahedral +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +line_width = =machine_nozzle_size * 0.95 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_bed_temperature_layer_0 = =material_bed_temperature + 5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =material_print_temperature + 5 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +prime_tower_enable = False +prime_tower_size = 16 +prime_tower_wipe_enabled = True +retraction_count_max = 12 +retraction_extra_prime_amount = 0.8 +retraction_extrusion_window = 1 +retraction_hop = 2 +retraction_hop_only_when_collides = True +retraction_min_travel = 0.8 +retraction_prime_speed = 18 +speed_equalize_flow_enabled = True +speed_layer_0 = =math.ceil(speed_print * 15 / 25) +speed_print = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 25) +speed_travel_layer_0 = 50 +speed_wall = =math.ceil(speed_print * 25 / 25) +speed_wall_0 = =math.ceil(speed_wall * 25 / 25) +support_angle = 50 +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +wall_0_inset = 0 +wall_line_width_x = =line_width +wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg new file mode 100644 index 0000000000..fb047fc502 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -0,0 +1,64 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_pp +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +brim_width = 20 +cool_fan_speed_max = 100 +cool_min_layer_time = 7 +cool_min_layer_time_fan_speed_max = 7 +cool_min_speed = 2.5 +infill_line_width = =round(line_width * 0.38 / 0.38, 2) +infill_overlap = 0 +infill_pattern = tetrahedral +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +line_width = =machine_nozzle_size * 0.95 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_bed_temperature_layer_0 = =material_bed_temperature + 5 +material_final_print_temperature = =material_print_temperature - 12 +material_initial_print_temperature = =material_print_temperature - 2 +material_print_temperature = =default_material_print_temperature - 13 +material_print_temperature_layer_0 = =material_print_temperature + 3 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +prime_tower_enable = False +prime_tower_size = 16 +prime_tower_wipe_enabled = True +retraction_count_max = 12 +retraction_extra_prime_amount = 0.8 +retraction_extrusion_window = 1 +retraction_hop = 2 +retraction_hop_only_when_collides = True +retraction_min_travel = 0.8 +retraction_prime_speed = 18 +speed_equalize_flow_enabled = True +speed_layer_0 = =math.ceil(speed_print * 15 / 25) +speed_print = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 25) + +speed_travel_layer_0 = 50 +speed_wall = =math.ceil(speed_print * 25 / 25) +speed_wall_0 = =math.ceil(speed_wall * 25 / 25) +support_angle = 50 +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +top_bottom_thickness = 1.1 +wall_0_inset = 0 +wall_line_width_x = =line_width +wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..b49d3945d4 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -0,0 +1,64 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_pp +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +brim_width = 20 +cool_fan_speed_max = 100 +cool_min_layer_time = 7 +cool_min_layer_time_fan_speed_max = 7 +cool_min_speed = 2.5 +infill_line_width = =round(line_width * 0.38 / 0.38, 2) +infill_overlap = 0 +infill_pattern = tetrahedral +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +line_width = =machine_nozzle_size * 0.95 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.85 +machine_nozzle_heat_up_speed = 1.5 +material_bed_temperature_layer_0 = =material_bed_temperature + 5 +material_final_print_temperature = =material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_print_temperature = =default_material_print_temperature - 15 +material_print_temperature_layer_0 = =material_print_temperature + 3 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +prime_tower_enable = False +prime_tower_size = 16 +prime_tower_wipe_enabled = True +retraction_count_max = 12 +retraction_extra_prime_amount = 0.8 +retraction_extrusion_window = 1 +retraction_hop = 2 +retraction_hop_only_when_collides = True +retraction_min_travel = 0.8 +retraction_prime_speed = 18 +speed_equalize_flow_enabled = True +speed_layer_0 = =math.ceil(speed_print * 15 / 25) +speed_print = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 25) + +speed_travel_layer_0 = 50 +speed_wall = =math.ceil(speed_print * 25 / 25) +speed_wall_0 = =math.ceil(speed_wall * 25 / 25) +support_angle = 50 +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +top_bottom_thickness = 1 +wall_0_inset = 0 +wall_line_width_x = =line_width +wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg new file mode 100644 index 0000000000..c02c4c642d --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -0,0 +1,38 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_tough_pla +variant = AA 0.4 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +cool_min_speed = 7 +infill_line_width = =round(line_width * 0.45/0.35,2) +jerk_print = 25 +jerk_roofing = 1 +layer_height_0 = 0.2 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature -10 +material_standby_temperature = 100 +prime_tower_enable = False +roofing_layer_count = 2 +skin_outline_count = 0 +skin_overlap = 20 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) +speed_print = 50 +speed_roofing = =math.ceil(speed_wall * 20 / 24) +speed_topbottom = =math.ceil(speed_print * 25 / 50) +speed_wall = =math.ceil(speed_print * 36 / 50) +speed_wall_0 = =math.ceil(speed_print * 26 / 50) +top_bottom_thickness = 1.2 +wall_line_width_x = =round(line_width * 0.35/0.35,2) +wall_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg new file mode 100644 index 0000000000..bf37d1dd4d --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_tough_pla +variant = AA 0.4 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +infill_line_width = =round(line_width * 1.285, 2) +layer_height_0 = 0.2 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature -10 +material_standby_temperature = 100 +prime_tower_enable = False +speed_layer_0 = =math.ceil(speed_print * 20 / 45) +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +top_bottom_thickness = 1.2 +wall_line_width_x = =round(line_width * 0.35/0.35,2) +wall_thickness = 1.23 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg new file mode 100644 index 0000000000..6333124f22 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = high +weight = 1 +material = generic_tough_pla +variant = AA 0.4 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +cool_min_speed = 10 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature - 15 +material_standby_temperature = 100 +prime_tower_enable = False +skin_overlap = 10 +speed_print = 45 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +top_bottom_thickness = 1.2 +wall_thickness = 1.23 + +layer_height_0 = 0.2 + +line_width = =round(machine_nozzle_size * 1.025, 3) +wall_line_width_x = =line_width +infill_line_width = =line_width diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..9de9001f11 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_tough_pla +variant = AA 0.4 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =cool_fan_speed +cool_min_speed = 7 +infill_line_width = =round(line_width * 1.285, 2) +layer_height_0 = 0.2 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_print_temperature = =default_material_print_temperature - 15 +material_standby_temperature = 100 +prime_tower_enable = False +skin_overlap = 10 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +top_bottom_thickness = 1.2 +wall_thickness = 1.23 + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg new file mode 100644 index 0000000000..33a03d7d81 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -0,0 +1,63 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_tpu +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +brim_width = 8.75 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 6 +cool_min_speed = 4 +gradual_infill_step_height = =5 * layer_height +infill_line_width = =round(line_width * 0.38 / 0.38, 2) +infill_overlap = 0 +infill_pattern = cross_3d +infill_sparse_density = 10 +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +line_width = =machine_nozzle_size * 0.95 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 +material_final_print_temperature = =material_print_temperature +material_flow = 106 +material_initial_print_temperature = =material_print_temperature +material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature_layer_0 = =material_print_temperature + 15 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +prime_tower_wipe_enabled = True +retraction_count_max = 12 +retraction_extra_prime_amount = 0.8 +retraction_extrusion_window = 1 +retraction_hop_only_when_collides = True +retraction_min_travel = =line_width * 2 +retraction_prime_speed = 15 +skin_overlap = 5 +speed_equalize_flow_enabled = True +speed_layer_0 = =math.ceil(speed_print * 18 / 25) +speed_print = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 25) + +speed_wall = =math.ceil(speed_print * 25 / 25) +speed_wall_0 = =math.ceil(speed_wall * 25 / 25) +support_angle = 50 +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +top_bottom_thickness = 0.7 +travel_avoid_distance = 1.5 +wall_0_inset = 0 +wall_line_width_x = =line_width +wall_thickness = 0.76 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg new file mode 100644 index 0000000000..566a368dd4 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -0,0 +1,64 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_tpu +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +brim_width = 8.75 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 6 +cool_min_speed = 4 +gradual_infill_step_height = =5 * layer_height +infill_line_width = =round(line_width * 0.38 / 0.38, 2) +infill_overlap = 0 +infill_pattern = cross_3d +infill_sparse_density = 10 +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +line_width = =machine_nozzle_size * 0.95 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 +material_final_print_temperature = =material_print_temperature +material_flow = 106 +material_initial_print_temperature = =material_print_temperature +material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature_layer_0 = =material_print_temperature + 15 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +prime_tower_wipe_enabled = True +retraction_count_max = 12 +retraction_extra_prime_amount = 0.8 +retraction_extrusion_window = 1 +retraction_hop_only_when_collides = True +retraction_min_travel = =line_width * 2 +retraction_prime_speed = 15 +skin_overlap = 5 +speed_equalize_flow_enabled = True +speed_layer_0 = =math.ceil(speed_print * 18 / 25) +speed_print = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 25) + +speed_wall = =math.ceil(speed_print * 25 / 25) +speed_wall_0 = =math.ceil(speed_wall * 25 / 25) +support_angle = 50 +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +top_bottom_thickness = 0.7 +travel_avoid_distance = 1.5 +wall_0_inset = 0 +wall_line_width_x = =line_width +wall_thickness = 0.76 + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..fe37bfe94a --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -0,0 +1,63 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_tpu +variant = AA 0.4 + +[values] +acceleration_enabled = True +acceleration_print = 4000 +brim_width = 8.75 +cool_fan_speed_max = 100 +cool_min_layer_time_fan_speed_max = 6 +cool_min_speed = 4 +gradual_infill_step_height = =5 * layer_height +infill_line_width = =round(line_width * 0.38 / 0.38, 2) +infill_overlap = 0 +infill_pattern = cross_3d +infill_sparse_density = 10 +infill_wipe_dist = 0.1 +jerk_enabled = True +jerk_print = 25 +line_width = =machine_nozzle_size * 0.95 +machine_min_cool_heat_time_window = 15 +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 +material_final_print_temperature = =material_print_temperature +material_flow = 106 +material_initial_print_temperature = =material_print_temperature +material_print_temperature_layer_0 = =material_print_temperature + 17 +material_standby_temperature = 100 +multiple_mesh_overlap = 0 +prime_tower_wipe_enabled = True +retraction_count_max = 12 +retraction_extra_prime_amount = 0.8 +retraction_extrusion_window = 1 +retraction_hop_only_when_collides = True +retraction_min_travel = =line_width * 2 +retraction_prime_speed = 15 +skin_overlap = 5 +speed_equalize_flow_enabled = True +speed_layer_0 = =math.ceil(speed_print * 18 / 25) +speed_print = 25 +speed_topbottom = =math.ceil(speed_print * 25 / 25) + +speed_wall = =math.ceil(speed_print * 25 / 25) +speed_wall_0 = =math.ceil(speed_wall * 25 / 25) +support_angle = 50 +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 35 +top_bottom_thickness = 0.7 +travel_avoid_distance = 1.5 +wall_0_inset = 0 +wall_line_width_x = =line_width +wall_thickness = 0.76 + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg new file mode 100644 index 0000000000..8e4b1415f9 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg @@ -0,0 +1,22 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_abs +variant = AA 0.8 + +[values] +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 20 +material_standby_temperature = 100 +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..f4b1588f39 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -0,0 +1,22 @@ +[general] +version = 4 +name = Sprint +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = superdraft +weight = -4 +material = generic_abs +variant = AA 0.8 + +[values] +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 25 +material_standby_temperature = 100 +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..a303655ec5 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -0,0 +1,22 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +material = generic_abs +variant = AA 0.8 + +[values] +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 22 +material_standby_temperature = 100 +speed_print = 50 +speed_topbottom = =math.ceil(speed_print * 30 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +retract_at_layer_change = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg new file mode 100644 index 0000000000..1465d5bb99 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Fast - Experimental +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_cpe_plus +variant = AA 0.8 +is_experimental = True + +[values] +brim_width = 14 +cool_fan_full_at_height = =layer_height_0 + 14 * layer_height +infill_before_walls = True +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 10 +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +retraction_hop = 0.1 +retraction_hop_enabled = False +skin_overlap = 0 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) +speed_print = 50 +speed_slowdown_layers = 15 +speed_topbottom = =math.ceil(speed_print * 35 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +support_bottom_distance = =support_z_distance +support_line_width = =round(line_width * 0.6 / 0.7, 2) +support_z_distance = =layer_height +top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..18ba654a63 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Sprint - Experimental +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = superdraft +weight = -4 +material = generic_cpe_plus +variant = AA 0.8 +is_experimental = True + +[values] +brim_width = 14 +cool_fan_full_at_height = =layer_height_0 + 7 * layer_height +infill_before_walls = True +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +retraction_hop = 0.1 +retraction_hop_enabled = False +skin_overlap = 0 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) +speed_print = 50 +speed_slowdown_layers = 8 +speed_topbottom = =math.ceil(speed_print * 35 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +support_bottom_distance = =support_z_distance +support_line_width = =round(line_width * 0.6 / 0.7, 2) +support_z_distance = =layer_height +top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..8683d9f498 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -0,0 +1,39 @@ +[general] +version = 4 +name = Extra Fast - Experimental +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +material = generic_cpe_plus +variant = AA 0.8 +is_experimental = True + +[values] +brim_width = 14 +cool_fan_full_at_height = =layer_height_0 + 9 * layer_height +infill_before_walls = True +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 +material_print_temperature = =default_material_print_temperature - 7 +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +retraction_hop = 0.1 +retraction_hop_enabled = False +skin_overlap = 0 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) +speed_print = 50 +speed_slowdown_layers = 10 +speed_topbottom = =math.ceil(speed_print * 35 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +support_bottom_distance = =support_z_distance +support_line_width = =round(line_width * 0.6 / 0.7, 2) +support_z_distance = =layer_height +top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg new file mode 100644 index 0000000000..dabff34ce6 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg @@ -0,0 +1,25 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_cpe +variant = AA 0.8 + +[values] +brim_width = 15 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 15 +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +speed_print = 40 +speed_topbottom = =math.ceil(speed_print * 25 / 40) +speed_wall = =math.ceil(speed_print * 30 / 40) + +jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..6371ce1337 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -0,0 +1,26 @@ +[general] +version = 4 +name = Sprint +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = superdraft +weight = -4 +material = generic_cpe +variant = AA 0.8 + +[values] +brim_width = 15 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 20 +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 30 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + +jerk_travel = 50
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..d3f5fb50be --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -0,0 +1,25 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +material = generic_cpe +variant = AA 0.8 + +[values] +brim_width = 15 +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature + 17 +material_standby_temperature = 100 +prime_tower_enable = True +retraction_combing_max_distance = 50 +speed_print = 40 +speed_topbottom = =math.ceil(speed_print * 25 / 40) +speed_wall = =math.ceil(speed_print * 30 / 40) + +jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg new file mode 100644 index 0000000000..b09f0f00df --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_nylon +variant = AA 0.8 + +[values] +brim_width = 5.6 +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 10 +infill_before_walls = True +infill_line_width = =line_width +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 +material_standby_temperature = 100 +ooze_shield_angle = 40 +prime_tower_enable = True +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..639ceb2348 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Sprint +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = superdraft +weight = -4 +material = generic_nylon +variant = AA 0.8 + +[values] +brim_width = 5.6 +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 10 +infill_before_walls = True +infill_line_width = =line_width +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 +material_standby_temperature = 100 +ooze_shield_angle = 40 +prime_tower_enable = True +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..6477e2d0a0 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -0,0 +1,35 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +material = generic_nylon +variant = AA 0.8 + +[values] +brim_width = 5.6 +cool_min_layer_time_fan_speed_max = 20 +cool_min_speed = 10 +infill_before_walls = True +infill_line_width = =line_width +machine_nozzle_cool_down_speed = 0.9 +machine_nozzle_heat_up_speed = 1.4 +material_standby_temperature = 100 +ooze_shield_angle = 40 +prime_tower_enable = True +raft_acceleration = =acceleration_layer_0 +raft_airgap = =round(layer_height_0 * 0.85, 2) +raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) +raft_margin = 10 +raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +switch_extruder_prime_speed = 30 +switch_extruder_retraction_amount = 30 +switch_extruder_retraction_speeds = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg new file mode 100644 index 0000000000..d1d716858d --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Fast - Experimental +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_pc +variant = AA 0.8 +is_experimental = True + +[values] +brim_width = 14 +cool_fan_full_at_height = =layer_height_0 + 14 * layer_height +infill_before_walls = True +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature - 5 +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +raft_airgap = 0.5 +raft_margin = 15 +skin_overlap = 0 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) +speed_print = 50 +speed_slowdown_layers = 15 +speed_topbottom = =math.ceil(speed_print * 25 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..e6a742599b --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Sprint - Experimental +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = superdraft +weight = -4 +material = generic_pc +variant = AA 0.8 +is_experimental = True + +[values] +brim_width = 14 +cool_fan_full_at_height = =layer_height_0 + 7 * layer_height +infill_before_walls = True +line_width = =machine_nozzle_size * 0.875 +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +raft_airgap = 0.5 +raft_margin = 15 +skin_overlap = 0 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) +speed_print = 50 +speed_slowdown_layers = 8 +speed_topbottom = =math.ceil(speed_print * 25 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..01b63d5ac5 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Extra Fast - Experimental +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +material = generic_pc +variant = AA 0.8 +is_experimental = True + +[values] +brim_width = 14 +cool_fan_full_at_height = =layer_height_0 + 9 * layer_height +infill_before_walls = True +line_width = =machine_nozzle_size * 0.875 +material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +raft_airgap = 0.5 +raft_margin = 15 +skin_overlap = 0 +speed_layer_0 = =math.ceil(speed_print * 15 / 50) +speed_print = 50 +speed_slowdown_layers = 10 +speed_topbottom = =math.ceil(speed_print * 25 / 50) +speed_wall = =math.ceil(speed_print * 40 / 50) +speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +support_line_width = =round(line_width * 0.6 / 0.7, 2) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg new file mode 100644 index 0000000000..50acc663ab --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg @@ -0,0 +1,42 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_pla +variant = AA 0.8 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =100 +cool_min_speed = 2 +gradual_infill_step_height = =3 * layer_height +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = =default_material_print_temperature + 10 +prime_tower_enable = True +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +top_bottom_thickness = =layer_height * 4 +wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) +wall_thickness = =wall_line_width_0 + wall_line_width_x + +retract_at_layer_change = False +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +infill_sparse_density = 15 +layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..e4e6c1a75d --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -0,0 +1,42 @@ +[general] +version = 4 +name = Sprint +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = superdraft +weight = -4 +material = generic_pla +variant = AA 0.8 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =100 +cool_min_speed = 2 +gradual_infill_step_height = =3 * layer_height +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = =default_material_print_temperature + 15 +prime_tower_enable = True +raft_margin = 10 +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +top_bottom_thickness = =layer_height * 4 +wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) +wall_thickness = =wall_line_width_0 + wall_line_width_x +retract_at_layer_change = False +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +infill_sparse_density = 15 +layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..005aaf3e04 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -0,0 +1,41 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +material = generic_pla +variant = AA 0.8 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =100 +cool_min_speed = 2 +gradual_infill_step_height = =3 * layer_height +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = =default_material_print_temperature + 10 +prime_tower_enable = True +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +top_bottom_thickness = =layer_height * 4 +wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) +wall_thickness = =wall_line_width_0 + wall_line_width_x +retract_at_layer_change = False +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +infill_sparse_density = 15 +layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg new file mode 100644 index 0000000000..ea17ee7b2d --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -0,0 +1,52 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_pp +variant = AA 0.8 + +[values] +brim_width = 25 +cool_min_layer_time_fan_speed_max = 6 +cool_min_speed = 17 +top_skin_expand_distance = =line_width * 2 +infill_before_walls = True +infill_line_width = =round(line_width * 0.7 / 0.8, 2) +infill_pattern = tetrahedral +jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) +jerk_support = =math.ceil(jerk_print * 25 / 25) +jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature_layer_0 = =default_material_print_temperature + 2 +material_standby_temperature = 100 +multiple_mesh_overlap = 0.2 +prime_tower_enable = True +prime_tower_flow = 100 +prime_tower_min_volume = 10 +retract_at_layer_change = False +retraction_count_max = 12 +retraction_extra_prime_amount = 0.5 +retraction_hop = 0.5 +retraction_min_travel = 1.5 +retraction_prime_speed = 15 +skin_line_width = =round(line_width * 0.78 / 0.8, 2) + +speed_wall_x = =math.ceil(speed_wall * 30 / 30) +support_bottom_distance = =support_z_distance +support_line_width = =round(line_width * 0.7 / 0.8, 2) +support_offset = =line_width +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 45 +top_bottom_thickness = 1.6 +travel_compensate_overlapping_walls_0_enabled = False +wall_0_wipe_dist = =line_width * 2 +wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) +wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..cce48c4d79 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -0,0 +1,52 @@ +[general] +version = 4 +name = Sprint +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = superdraft +weight = -4 +material = generic_pp +variant = AA 0.8 + +[values] +brim_width = 25 +cool_min_layer_time_fan_speed_max = 6 +cool_min_speed = 17 +top_skin_expand_distance = =line_width * 2 +infill_before_walls = True +infill_line_width = =round(line_width * 0.7 / 0.8, 2) +infill_pattern = tetrahedral +jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) +jerk_support = =math.ceil(jerk_print * 25 / 25) +jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature_layer_0 = =default_material_print_temperature + 2 +material_standby_temperature = 100 +multiple_mesh_overlap = 0.2 +prime_tower_enable = True +prime_tower_flow = 100 +prime_tower_min_volume = 20 +retract_at_layer_change = False +retraction_count_max = 12 +retraction_extra_prime_amount = 0.5 +retraction_hop = 0.5 +retraction_min_travel = 1.5 +retraction_prime_speed = 15 +skin_line_width = =round(line_width * 0.78 / 0.8, 2) + +speed_wall_x = =math.ceil(speed_wall * 30 / 30) +support_bottom_distance = =support_z_distance +support_line_width = =round(line_width * 0.7 / 0.8, 2) +support_offset = =line_width +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 45 +top_bottom_thickness = 1.6 +travel_compensate_overlapping_walls_0_enabled = False +wall_0_wipe_dist = =line_width * 2 +wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) +wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..9b7bfd217b --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -0,0 +1,51 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +material = generic_pp +variant = AA 0.8 + +[values] +brim_width = 25 +cool_min_layer_time_fan_speed_max = 6 +cool_min_speed = 17 +top_skin_expand_distance = =line_width * 2 +infill_before_walls = True +infill_line_width = =round(line_width * 0.7 / 0.8, 2) +infill_pattern = tetrahedral +jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) +jerk_support = =math.ceil(jerk_print * 25 / 25) +jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =default_material_print_temperature + 2 +material_standby_temperature = 100 +multiple_mesh_overlap = 0.2 +prime_tower_enable = True +prime_tower_flow = 100 +prime_tower_min_volume = 15 +retract_at_layer_change = False +retraction_count_max = 12 +retraction_extra_prime_amount = 0.5 +retraction_hop = 0.5 +retraction_min_travel = 1.5 +retraction_prime_speed = 15 +skin_line_width = =round(line_width * 0.78 / 0.8, 2) + +speed_wall_x = =math.ceil(speed_wall * 30 / 30) +support_bottom_distance = =support_z_distance +support_line_width = =round(line_width * 0.7 / 0.8, 2) +support_offset = =line_width +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 45 +top_bottom_thickness = 1.6 +travel_compensate_overlapping_walls_0_enabled = False +wall_0_wipe_dist = =line_width * 2 +wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) +wall_thickness = 1.6 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg new file mode 100644 index 0000000000..1c628f57c8 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -0,0 +1,40 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_tough_pla +variant = AA 0.8 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =100 +cool_min_speed = 2 +gradual_infill_step_height = =3 * layer_height +infill_line_width = =round(line_width * 0.75 / 0.75, 2) +infill_pattern = cubic +layer_height_0 = 0.4 +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = =default_material_print_temperature + 0 +prime_tower_enable = False +retract_at_layer_change = False +speed_print = 45 +speed_topbottom = =round(speed_print * 35 / 45) +speed_wall = =round(speed_print * 40 / 45) +speed_wall_0 = =round(speed_print * 35 / 45) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +top_bottom_thickness = =layer_height * 6 +wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) +wall_thickness = =wall_line_width_0 + wall_line_width_x
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..f0adc177a3 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -0,0 +1,41 @@ +[general] +version = 4 +name = Sprint +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = superdraft +weight = -4 +material = generic_tough_pla +variant = AA 0.8 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =100 +cool_min_speed = 2 +gradual_infill_step_height = =3 * layer_height +infill_line_width = =round(line_width * 0.75 / 0.75, 2) +infill_pattern = cubic +layer_height_0 = 0.4 +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = =default_material_print_temperature + 5 +prime_tower_enable = False +raft_margin = 10 +retract_at_layer_change = False +speed_infill = =math.ceil(speed_print * 30 / 30) +speed_print = 30 +speed_topbottom = =math.ceil(speed_print * 20 / 30) +speed_wall = =math.ceil(speed_print * 25/ 30) +speed_wall_0 = =math.ceil(speed_print * 20 / 30) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +top_bottom_thickness = =layer_height * 4 +wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..818426141e --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -0,0 +1,43 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +material = generic_tough_pla +variant = AA 0.8 + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =100 +cool_min_speed = 2 +gradual_infill_step_height = =3 * layer_height +infill_line_width = =round(line_width * 0.75 / 0.75, 2) +infill_pattern = cubic +layer_height_0 = 0.4 +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = =default_material_print_temperature + 5 +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +prime_tower_enable = False +retract_at_layer_change = False +speed_infill = =math.ceil(speed_print * 30 / 35) +speed_print = 35 +speed_topbottom = =math.ceil(speed_print * 20 / 35) +speed_wall = =math.ceil(speed_print * 25/ 35) +speed_wall_0 = =math.ceil(speed_print * 20 / 35) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_xy_distance = =wall_line_width_0 * 1.5 +top_bottom_thickness = =layer_height * 4 +wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_line_width_x = =round(wall_line_width * 0.75 / 0.75, 2) +wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg new file mode 100644 index 0000000000..439f6a7063 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -0,0 +1,62 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_tpu +variant = AA 0.8 + +[values] +brim_width = 8.75 +cool_min_layer_time_fan_speed_max = 6 +top_skin_expand_distance = =line_width * 2 +infill_before_walls = True +infill_line_width = =round(line_width * 0.7 / 0.8, 2) +infill_pattern = cross_3d +jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) +jerk_support = =math.ceil(jerk_print * 25 / 25) +jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 +material_final_print_temperature = =material_print_temperature +material_flow = 105 +material_initial_print_temperature = =material_print_temperature +material_print_temperature = =default_material_print_temperature - 2 +material_print_temperature_layer_0 = =material_print_temperature + 19 +material_standby_temperature = 100 +multiple_mesh_overlap = 0.2 +prime_tower_enable = True +prime_tower_flow = 100 +retract_at_layer_change = False +retraction_count_max = 12 +retraction_extra_prime_amount = 0.5 +retraction_hop = 1.5 +retraction_hop_only_when_collides = False +retraction_min_travel = =line_width * 2 +retraction_prime_speed = 15 +skin_line_width = =round(line_width * 0.78 / 0.8, 2) +speed_print = 30 +speed_topbottom = =math.ceil(speed_print * 25 / 30) + +speed_wall = =math.ceil(speed_print * 30 / 30) +speed_wall_x = =math.ceil(speed_wall * 30 / 30) +support_angle = 50 +support_bottom_distance = =support_z_distance +support_line_width = =round(line_width * 0.7 / 0.8, 2) +support_offset = =line_width +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 45 +top_bottom_thickness = 1.2 +travel_avoid_distance = 1.5 +travel_compensate_overlapping_walls_0_enabled = False +wall_0_wipe_dist = =line_width * 2 +wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) +wall_thickness = 1.3 + +jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..dcef8ddf72 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -0,0 +1,63 @@ +[general] +version = 4 +name = Sprint +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = superdraft +weight = -4 +material = generic_tpu +variant = AA 0.8 + +[values] +brim_width = 8.75 +cool_min_layer_time_fan_speed_max = 6 +top_skin_expand_distance = =line_width * 2 +infill_before_walls = True +infill_line_width = =round(line_width * 0.7 / 0.8, 2) +infill_pattern = cross_3d +infill_sparse_density = 10 +jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) +jerk_support = =math.ceil(jerk_print * 25 / 25) +jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 +material_final_print_temperature = =material_print_temperature +material_flow = 105 +material_initial_print_temperature = =material_print_temperature +material_print_temperature = =default_material_print_temperature + 2 +material_print_temperature_layer_0 = =material_print_temperature + 15 +material_standby_temperature = 100 +multiple_mesh_overlap = 0.2 +prime_tower_enable = True +prime_tower_flow = 100 +retract_at_layer_change = False +retraction_count_max = 12 +retraction_extra_prime_amount = 0.5 +retraction_hop = 1.5 +retraction_hop_only_when_collides = False +retraction_min_travel = =line_width * 2 +retraction_prime_speed = 15 +skin_line_width = =round(line_width * 0.78 / 0.8, 2) +speed_print = 30 +speed_topbottom = =math.ceil(speed_print * 20 / 30) + +speed_wall = =math.ceil(speed_print * 30 / 30) +speed_wall_x = =math.ceil(speed_wall * 30 / 30) +support_angle = 50 +support_bottom_distance = =support_z_distance +support_line_width = =round(line_width * 0.7 / 0.8, 2) +support_offset = =line_width +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 45 +top_bottom_thickness = 1.2 +travel_avoid_distance = 1.5 +travel_compensate_overlapping_walls_0_enabled = False +wall_0_wipe_dist = =line_width * 2 +wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) +wall_thickness = 1.3 + +jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..3bd6295712 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -0,0 +1,62 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +material = generic_tpu +variant = AA 0.8 + +[values] +brim_width = 8.75 +cool_min_layer_time_fan_speed_max = 6 +top_skin_expand_distance = =line_width * 2 +infill_before_walls = True +infill_line_width = =round(line_width * 0.7 / 0.8, 2) +infill_pattern = cross_3d +infill_sparse_density = 10 +jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) +jerk_support = =math.ceil(jerk_print * 25 / 25) +jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +machine_nozzle_cool_down_speed = 0.5 +machine_nozzle_heat_up_speed = 2.5 +material_final_print_temperature = =material_print_temperature +material_flow = 105 +material_initial_print_temperature = =material_print_temperature +material_print_temperature_layer_0 = =material_print_temperature + 17 +material_standby_temperature = 100 +multiple_mesh_overlap = 0.2 +prime_tower_enable = True +prime_tower_flow = 100 +retract_at_layer_change = False +retraction_count_max = 12 +retraction_extra_prime_amount = 0.5 +retraction_hop = 1.5 +retraction_hop_only_when_collides = False +retraction_min_travel = =line_width * 2 +retraction_prime_speed = 15 +skin_line_width = =round(line_width * 0.78 / 0.8, 2) +speed_print = 30 +speed_topbottom = =math.ceil(speed_print * 23 / 30) + +speed_wall = =math.ceil(speed_print * 30 / 30) +speed_wall_x = =math.ceil(speed_wall * 30 / 30) +support_angle = 50 +support_bottom_distance = =support_z_distance +support_line_width = =round(line_width * 0.7 / 0.8, 2) +support_offset = =line_width +switch_extruder_prime_speed = 15 +switch_extruder_retraction_amount = 20 +switch_extruder_retraction_speeds = 45 +top_bottom_thickness = 1.2 +travel_avoid_distance = 1.5 +travel_compensate_overlapping_walls_0_enabled = False +wall_0_wipe_dist = =line_width * 2 +wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) +wall_thickness = 1.3 + +jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg new file mode 100644 index 0000000000..7e94ba6a7c --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg @@ -0,0 +1,20 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_pva +variant = BB 0.4 + +[values] +brim_replaces_support = False +material_print_temperature = =default_material_print_temperature + 10 +material_standby_temperature = 100 +prime_tower_enable = False +skin_overlap = 20 +support_brim_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg new file mode 100644 index 0000000000..4a8b11eef2 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg @@ -0,0 +1,21 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +material = generic_pva +variant = BB 0.4 + +[values] +brim_replaces_support = False +material_print_temperature = =default_material_print_temperature + 5 +material_standby_temperature = 100 +prime_tower_enable = False +skin_overlap = 15 +support_brim_enable = True +support_infill_sparse_thickness = 0.3 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg new file mode 100644 index 0000000000..aa83fa6a3b --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = high +weight = 1 +material = generic_pva +variant = BB 0.4 + +[values] +brim_replaces_support = False +material_standby_temperature = 100 +prime_tower_enable = False +support_brim_enable = True +support_infill_sparse_thickness = 0.18 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..1c9814a87d --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -0,0 +1,18 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +material = generic_pva +variant = BB 0.4 + +[values] +brim_replaces_support = False +material_standby_temperature = 100 +prime_tower_enable = False +support_brim_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg new file mode 100644 index 0000000000..aebbed3d5f --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg @@ -0,0 +1,18 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_pva +variant = BB 0.8 + +[values] +brim_replaces_support = False +material_print_temperature = =default_material_print_temperature + 5 +material_standby_temperature = 100 +support_brim_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg new file mode 100644 index 0000000000..c9179b1480 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -0,0 +1,18 @@ +[general] +version = 4 +name = Sprint +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = superdraft +weight = -4 +material = generic_pva +variant = BB 0.8 + +[values] +brim_replaces_support = False +material_standby_temperature = 100 +support_brim_enable = True +support_interface_height = 0.9 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg new file mode 100644 index 0000000000..57019cb91f --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -0,0 +1,19 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +material = generic_pva +variant = BB 0.8 + +[values] +brim_replaces_support = False +material_standby_temperature = 100 +support_brim_enable = True +support_infill_sparse_thickness = 0.3 +support_interface_height = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg new file mode 100644 index 0000000000..846679e355 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_cffcpe +variant = CC 0.6 + +[values] +adhesion_type = skirt +cool_fan_enabled = True +cool_min_layer_time = 7 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = 6 +infill_line_width = =line_width +initial_layer_line_width_factor = 130.0 +line_width = =machine_nozzle_size * (0.58/0.6) +material_bed_temperature_layer_0 = =material_bed_temperature + 5 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +skin_overlap = 20 +support_bottom_distance = =support_z_distance / 2 +support_top_distance = =support_z_distance +support_z_distance = =layer_height * 2 +wall_line_width_x = =line_width diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg new file mode 100644 index 0000000000..228045c134 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_cffpa +variant = CC 0.6 + +[values] +adhesion_type = skirt +cool_fan_enabled = True +cool_min_layer_time = 7 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = 6 +infill_line_width = =line_width +initial_layer_line_width_factor = 130.0 +line_width = =machine_nozzle_size * (0.58/0.6) +material_bed_temperature_layer_0 = =material_bed_temperature + 5 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +skin_overlap = 20 +support_bottom_distance = =support_z_distance / 2 +support_top_distance = =support_z_distance +support_z_distance = =layer_height * 2 +wall_line_width_x = =line_width diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg new file mode 100644 index 0000000000..ae9c23d1a8 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_gffcpe +variant = CC 0.6 + +[values] +adhesion_type = brim +cool_fan_enabled = True +cool_min_layer_time = 7 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = 6 +infill_line_width = =line_width +initial_layer_line_width_factor = 130.0 +line_width = =machine_nozzle_size * (0.58/0.6) +material_bed_temperature_layer_0 = =material_bed_temperature + 5 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +skin_overlap = 20 +support_bottom_distance = =support_z_distance / 2 +support_top_distance = =support_z_distance +support_z_distance = =layer_height * 2 +wall_line_width_x = =line_width diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg new file mode 100644 index 0000000000..56de714613 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +material = generic_gffpa +variant = CC 0.6 + +[values] +adhesion_type = brim +cool_fan_enabled = True +cool_min_layer_time = 7 +cool_min_layer_time_fan_speed_max = 15 +cool_min_speed = 6 +infill_line_width = =line_width +initial_layer_line_width_factor = 130.0 +line_width = =machine_nozzle_size * (0.58/0.6) +material_bed_temperature_layer_0 = =material_bed_temperature + 5 +material_print_temperature = =default_material_print_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_standby_temperature = 100 +skin_overlap = 20 +support_bottom_distance = =support_z_distance / 2 +support_top_distance = =support_z_distance +support_z_distance = =layer_height * 2 +wall_line_width_x = =line_width diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg new file mode 100644 index 0000000000..a5bdfad16a --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -0,0 +1,43 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -3 +material = generic_pla +variant = CC 0.6 +is_experimental = True + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =100 +cool_min_speed = 2 +gradual_infill_step_height = =3 * layer_height +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +infill_pattern = triangles +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = =default_material_print_temperature + 10 +material_standby_temperature = 100 +prime_tower_enable = True +retract_at_layer_change = False +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_pattern = ='triangles' +support_xy_distance = =wall_line_width_0 * 1.5 +top_bottom_thickness = =layer_height * 4 +wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) +wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg new file mode 100644 index 0000000000..f8bb270616 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg @@ -0,0 +1,43 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -2 +material = generic_pla +variant = CC 0.6 +is_experimental = True + +[values] +cool_fan_full_at_height = =layer_height_0 + 2 * layer_height +cool_fan_speed_max = =100 +cool_min_speed = 2 +gradual_infill_step_height = =3 * layer_height +infill_line_width = =round(line_width * 0.65 / 0.75, 2) +infill_pattern = triangles +line_width = =machine_nozzle_size * 0.9375 +machine_nozzle_cool_down_speed = 0.75 +machine_nozzle_heat_up_speed = 1.6 +material_final_print_temperature = =max(-273.15, material_print_temperature - 15) +material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) +material_print_temperature = =default_material_print_temperature + 10 +material_standby_temperature = 100 +prime_tower_enable = True +retract_at_layer_change = False +speed_print = 45 +speed_topbottom = =math.ceil(speed_print * 35 / 45) +speed_wall = =math.ceil(speed_print * 40 / 45) +speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +support_angle = 70 +support_line_width = =line_width * 0.75 +support_pattern = ='triangles' +support_xy_distance = =wall_line_width_0 * 1.5 +top_bottom_thickness = =layer_height * 4 +wall_line_width = =round(line_width * 0.75 / 0.75, 2) +wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2) +wall_thickness = =wall_line_width_0 + wall_line_width_x diff --git a/resources/quality/ultimaker_s3/um_s3_global_Draft_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_global_Draft_Quality.inst.cfg new file mode 100644 index 0000000000..f2203eddbc --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_global_Draft_Quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = draft +weight = -2 +global_quality = True + +[values] +layer_height = 0.2 diff --git a/resources/quality/ultimaker_s3/um_s3_global_Fast_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_global_Fast_Quality.inst.cfg new file mode 100644 index 0000000000..7d05340547 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_global_Fast_Quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Normal +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = fast +weight = -1 +global_quality = True + +[values] +layer_height = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_global_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_global_High_Quality.inst.cfg new file mode 100644 index 0000000000..4f12ea611f --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_global_High_Quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Extra Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = high +weight = 1 +global_quality = True + +[values] +layer_height = 0.06 diff --git a/resources/quality/ultimaker_s3/um_s3_global_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_global_Normal_Quality.inst.cfg new file mode 100644 index 0000000000..5fd3f6d3a6 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_global_Normal_Quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Fine +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = normal +weight = 0 +global_quality = True + +[values] +layer_height = 0.1 diff --git a/resources/quality/ultimaker_s3/um_s3_global_Superdraft_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_global_Superdraft_Quality.inst.cfg new file mode 100644 index 0000000000..eccb41a73e --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_global_Superdraft_Quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Sprint +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = superdraft +weight = -4 +global_quality = True + +[values] +layer_height = 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_global_Verydraft_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_global_Verydraft_Quality.inst.cfg new file mode 100644 index 0000000000..716a75d9e9 --- /dev/null +++ b/resources/quality/ultimaker_s3/um_s3_global_Verydraft_Quality.inst.cfg @@ -0,0 +1,14 @@ +[general] +version = 4 +name = Extra Fast +definition = ultimaker_s3 + +[metadata] +setting_version = 9 +type = quality +quality_type = verydraft +weight = -3 +global_quality = True + +[values] +layer_height = 0.3 |