material specific exceptions on the defaults

Some materials can handle higher unretract speeds. Also some unnecessary overwrites of the defaults are removed. PP-96

96 files changed, 82 insertions, 46 deletions

diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg
index 45f350cdbd..0ab179959f 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_fast.inst.cfg
@@ -17,6 +17,8 @@ cool_min_layer_time = 3
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_travel = 150
@@ -26,5 +28,4 @@ wall_thickness = 0.7
 speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
-speed_infill = =math.ceil(speed_print * 45 / 45)
-retraction_combing_max_distance = 50
+speed_infill = =math.ceil(speed_print * 45 / 45)
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg
index 3d0e9f6abd..dc4b06940c 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_high.inst.cfg
@@ -17,11 +17,12 @@ cool_min_layer_time = 2
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 15
 infill_sparse_density = 20
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall = =math.ceil(speed_print * 30 / 45)
 top_bottom_thickness = 0.72
 wall_thickness = 1.05
 speed_topbottom = =math.ceil(speed_print * 15 / 45)
-speed_infill = =math.ceil(speed_print * 45 / 45)
-retraction_combing_max_distance = 50
+speed_infill = =math.ceil(speed_print * 45 / 45)
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg
index ab5559b322..2ea0c4a828 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.4_normal.inst.cfg
@@ -17,9 +17,10 @@ cool_min_layer_time = 3
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall = =math.ceil(speed_print * 30 / 45)
 top_bottom_thickness = 0.8
-wall_thickness = 1.05
-retraction_combing_max_distance = 50
+wall_thickness = 1.05
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg
index 286474454b..60642a3c69 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpe_0.6_normal.inst.cfg
@@ -17,8 +17,9 @@ cool_min_layer_time = 5
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 8
 infill_sparse_density = 20
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 top_bottom_thickness = 1.2
 wall_thickness = 1.59
-retraction_combing_max_distance = 50
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
index d37743423b..fdaecf1142 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
@@ -26,6 +26,8 @@ raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
 raft_margin = 15
 raft_surface_line_width = 0.38
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
@@ -37,5 +39,4 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else
 support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5
-wall_thickness = 1.14
-retraction_combing_max_distance = 50
\ No newline at end of file
+wall_thickness = 1.14
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
index a0fd902e31..b9845f7002 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
@@ -26,6 +26,8 @@ raft_interface_line_spacing = 1
 raft_interface_line_width = 0.8
 raft_margin = 15
 raft_surface_line_width = 0.38
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
@@ -37,5 +39,4 @@ support_infill_rate = =0 if support_enable and support_structure == 'tree' else
 support_pattern = lines
 support_z_distance = 0.26
 top_bottom_thickness = 1.5
-wall_thickness = 1.14
-retraction_combing_max_distance = 50
\ No newline at end of file
+wall_thickness = 1.14
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
index b96242f569..965182eb4d 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
@@ -27,6 +27,8 @@ raft_interface_line_width = 1.2
 raft_margin = 15
 raft_surface_line_width = 0.57
 raft_surface_thickness = 0.2
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
@@ -41,5 +43,4 @@ support_pattern = lines
 support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75
-wall_thickness = 1.14
-retraction_combing_max_distance = 50
\ No newline at end of file
+wall_thickness = 1.14
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
index 58e7974fe6..817635d4fd 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
@@ -27,6 +27,8 @@ raft_interface_line_width = 1.2
 raft_margin = 15
 raft_surface_line_width = 0.57
 raft_surface_thickness = 0.2
+retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
@@ -41,5 +43,4 @@ support_pattern = lines
 support_xy_distance = 0.6
 support_z_distance = 0.22
 top_bottom_thickness = 0.75
-wall_thickness = 1.14
-retraction_combing_max_distance = 50
\ No newline at end of file
+wall_thickness = 1.14
\ No newline at end of file
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
index b9074df494..2358657ab3 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
@@ -26,6 +26,7 @@ raft_interface_line_width = 0.8
 raft_margin = 15
 raft_surface_line_width = 0.5
 raft_surface_thickness = 0.15
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
index 1986a09fc7..5a9283faff 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
@@ -26,6 +26,7 @@ raft_interface_line_width = 0.8
 raft_margin = 15
 raft_surface_line_width = 0.5
 raft_surface_thickness = 0.15
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_travel = 150
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
index 78cf8fd15d..18fe82d680 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
@@ -27,6 +27,7 @@ raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 retraction_hop_enabled = 0.2
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
 speed_support = 40
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
index 1b38f220e2..8685edd405 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
@@ -27,6 +27,7 @@ raft_margin = 15
 raft_surface_line_width = 0.6
 raft_surface_thickness = 0.15
 retraction_hop_enabled = 0.2
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
 speed_support = 40
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg
index c03d3ca7c3..94562f422d 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_draft.inst.cfg
@@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 60)
 speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg
index a267ce002a..43a5cb6596 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_fast.inst.cfg
@@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 60)
 speed_print = 60
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg
index 3a44812078..c7c7753cf2 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_high.inst.cfg
@@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 20 / 50)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg
index f85c61b885..2b3c24a912 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.4_normal.inst.cfg
@@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 20 / 50)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg
index 4f77e995d4..8f3079c4f4 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pla_0.6_normal.inst.cfg
@@ -15,6 +15,7 @@ variant = 0.6 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 55)
 speed_print = 55
 speed_topbottom = =math.ceil(speed_print * 20 / 55)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
index 077ce01713..a7dad05ae9 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
@@ -45,7 +45,6 @@ retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
-retraction_prime_speed = 15
 skin_overlap = 10
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
index 9e827e0da6..6f9612ff9a 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
@@ -45,7 +45,6 @@ retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.5
-retraction_prime_speed = 15
 skin_overlap = 10
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
index afc75d1238..7c94a57190 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
@@ -44,7 +44,6 @@ retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
-retraction_prime_speed = 15
 skin_overlap = 10
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
index 52b963bb90..6e2a8960bd 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
@@ -44,7 +44,6 @@ retraction_extrusion_window = 1
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
-retraction_prime_speed = 15
 skin_overlap = 10
 speed_layer_0 = =speed_print
 speed_prime_tower = =speed_topbottom
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg
index ab146869d9..4161bd3781 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_draft.inst.cfg
@@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg
index a985f0c797..b26340fdb2 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_fast.inst.cfg
@@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 30 / 40)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg
index 7da9e7165c..a4ee94c36c 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.4_normal.inst.cfg
@@ -15,6 +15,7 @@ variant = 0.4 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 20 / 40)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg
index 1fd07a8c85..173b551e8b 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpla_0.6_normal.inst.cfg
@@ -15,6 +15,7 @@ variant = 0.6 mm
 cool_min_layer_time = 5
 cool_min_speed = 10
 infill_sparse_density = 20
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 20 / 50)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg
index 08a82f1d5d..f3cc0937a0 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_ABS_Normal_Quality.inst.cfg
@@ -15,6 +15,5 @@ variant = AA 0.25
 cool_fan_speed = 40
 infill_overlap = =0 if infill_sparse_density > 80 else 15
 material_final_print_temperature = =material_print_temperature - 5
-retraction_prime_speed = 25
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 wall_thickness = 0.92
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
index 47119e62bf..59423682f1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -34,7 +34,6 @@ retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
index e426ee3efd..2f6c5f2888 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
@@ -37,7 +37,7 @@ retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 13
+retraction_prime_speed = 15
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_travel_layer_0 = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
index d0e6e36ea3..1aad4c498f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -32,6 +32,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
index 51f90c6c8f..1172267ed4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -32,6 +32,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
index e5241c36c6..19b5094f03 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -34,6 +34,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
index 155001b888..a282ca7222 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -34,6 +34,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg
index 1a6ae612ce..7c42d02ada 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg
@@ -16,6 +16,7 @@ material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg
index f0b55841f3..c5641afd64 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg
@@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg
index fdbe5fb1d6..a6ee66b17e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg
@@ -19,6 +19,7 @@ material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg
index 9bffd6f794..e888cf8ae0 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg
@@ -17,6 +17,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
index 5bc7246093..5fb23190d1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
index 614254e9d9..a46e184d05 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
index 3a11b6dbe3..50d885b55f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
@@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
index a5abd1bab6..84aebaf798 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
index 69bbcf001d..f4bb4ba024 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
index 63568363d2..ece85f2168 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
index 3a317c820e..0caf9b1cd6 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
index 8b264ad751..751942b0f9 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
index 7ca3b04031..d5a5be70f8 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
@@ -19,6 +19,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 40 / 70)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
index 38741f40ff..d274eaffd3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
@@ -18,6 +18,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 speed_print = 70
 speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
index 871ab6adc8..2f54d272fe 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
@@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_print = 50
 speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
index 7c8b71cd68..2c23a4ae71 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -19,6 +19,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = 10
 top_bottom_thickness = 1
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
index 1f005ff77a..362d9ef5b9 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
@@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
index 816eaeda5d..b59e2537e3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
@@ -42,7 +42,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
index 498bdd6bd5..3b3ff5b463 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
@@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
index 28b1470419..2530ca9490 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
index 2201b135b1..a3d1d1f255 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
@@ -23,6 +23,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
index b97bdbece7..cb2d019fdc 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
@@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
index 262a1593a3..32ae7fbd53 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
@@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_print = 45
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
index c438fd2a93..a81a3b9f08 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
@@ -21,6 +21,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
index f00bf89dc6..bda8ad2775 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
@@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
index 0a01d45a0c..8b0b8abf0c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
index 18c5c014f8..0f4a416273 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
index 536f766916..2b0b1c1720 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -40,7 +40,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg
index efacf651ab..c1d936a7a7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_ABS_Normal_Quality.inst.cfg
@@ -15,6 +15,5 @@ variant = AA 0.25
 cool_fan_speed = 40
 infill_overlap = =0 if infill_sparse_density > 80 else 15
 material_final_print_temperature = =material_print_temperature - 5
-retraction_prime_speed = 25
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 wall_thickness = 0.92
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index ee3750680f..2b6121e9ee 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -34,7 +34,6 @@ retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
index 07aa9462e1..9870b07ab4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
@@ -37,7 +37,7 @@ retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 13
+retraction_prime_speed = 15
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_travel_layer_0 = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
index f6927953d1..26dc7ea9c3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -32,6 +32,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
index ffb22e619d..4b3fcd3fd9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -32,6 +32,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
index 262e6583a2..6fc1c398c4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
@@ -34,6 +34,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
index a11519fb05..4f7901cd52 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -33,6 +33,7 @@ retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg
index 6c1a3a45af..3f3ce3ce79 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg
@@ -16,6 +16,7 @@ material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 speed_print = 60
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg
index 71c25958fa..cbabc4d432 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg
@@ -17,6 +17,7 @@ material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg
index 9692faac22..86c81a14a2 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg
@@ -19,6 +19,7 @@ material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg
index 5698375c63..62163c286e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg
@@ -17,6 +17,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 retraction_combing_max_distance = 50
+retraction_prime_speed = =retraction_speed
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
index 9a02eeede4..58d05433c0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -26,6 +26,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
index 01859d49a1..26a74aae03 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -28,6 +28,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
index c25a46ce20..8a6d7bdca2 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
index 321c369975..4976153044 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -27,6 +27,7 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_jerk = =jerk_layer_0
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+retraction_prime_speed = =retraction_speed
 skin_overlap = 50
 speed_layer_0 = 10
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index 2fdc113b3c..601d1164fd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -42,7 +42,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index 9adceaa9cd..cad4e25f95 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index 65364d955a..6cc4d15e73 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index e6adcfaf22..093a04b8a2 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -41,7 +41,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 15
 skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
index fcc7ce6278..f339aa3988 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
@@ -19,6 +19,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
index 27df25d5d5..206442121b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
@@ -18,6 +18,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 speed_print = 70
 speed_layer_0 = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
index 9df48afa7b..3f29983cfd 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
@@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_print = 50
 speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
index b3d096ed71..227730f359 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -19,6 +19,7 @@ machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = 10
 top_bottom_thickness = 1
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
index 376cebd718..141c4604b0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg
@@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
index 3acfe41222..8c8091cb1e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
@@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
index 4f7e5c5860..047ee82739 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
@@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
index b2b03b494d..c91c73983e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
@@ -43,7 +43,6 @@ retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
-retraction_prime_speed = 18
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
index ef698a68e6..d65f61cf74 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Draft_Print.inst.cfg
@@ -23,6 +23,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_print = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
index e66b376515..bea0ca9228 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Print.inst.cfg
@@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature -10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
index cb9e545007..190f2f8e06 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg
@@ -20,6 +20,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_print = 45
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
index 405fd35825..190f3422b0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Quality.inst.cfg
@@ -21,6 +21,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 15
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
index bd3193df37..9e614cdd28 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg
@@ -34,6 +34,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 
 prime_tower_enable = False
+retraction_prime_speed = =retraction_speed
 skin_edge_support_thickness = =0.9 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
index 30eb73204b..a867e168b1 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
@@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
index b63ecbdad8..f4ef171a69 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
@@ -41,7 +41,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
index ff25dd69a9..ce9b26051e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -40,7 +40,6 @@ retraction_extra_prime_amount = 0.8
 retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 skin_line_width = =round(line_width / 0.8, 2)
 skin_overlap = 5
 speed_layer_0 = =math.ceil(speed_print * 18 / 25)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index a400721d90..99511e1ab6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -34,7 +34,6 @@ retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
 retraction_min_travel = =line_width * 2
-retraction_prime_speed = 15
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 30 / 30)