diff options
author | Ghostkeeper <rubend@tutanota.com> | 2021-12-31 17:01:12 +0300 |
---|---|---|
committer | Ghostkeeper <rubend@tutanota.com> | 2021-12-31 17:01:12 +0300 |
commit | e6830f024161dee17632e178574530c65b9e1072 (patch) | |
tree | cc33fa1dfcccefe1a7e15cb824c2fe9828af1c0f /resources/quality | |
parent | 19821d8d684ea47350ef155229a787353c0d1f4b (diff) | |
parent | a8fbba3c2514b7655072ddcfb41a38a37de7e1cc (diff) |
Merge branch 'PP-95_reduce-top/bottom-speed-for-TPU' into 4.13
Diffstat (limited to 'resources/quality')
9 files changed, 18 insertions, 15 deletions
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index 4c1c2a1d9e..0ec8263f43 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -46,11 +46,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) +speed_topbottom = =math.ceil(speed_print * 0.8) speed_travel = 300 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 0dda14dcfc..068edf5972 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -47,11 +47,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) +speed_topbottom = =math.ceil(speed_print * 0.8) speed_travel = 300 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 5eded26b9f..947b33a6cb 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -44,11 +44,12 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) +speed_topbottom = =math.ceil(speed_print * 0.8) speed_travel = 300 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index 194a7d41ca..3c02550a8c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -44,12 +44,12 @@ retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) - +speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index 436b8a32e3..110fd361be 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -44,12 +44,12 @@ retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) - +speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index d8ade5a573..0e8d3c7e70 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -43,12 +43,12 @@ retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) - +speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 79f3a1b769..664f651341 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -44,12 +44,12 @@ retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) - +speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index 7bce192f75..2edc53b7c4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -44,12 +44,12 @@ retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) - +speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 056871cfa9..7804a7cb74 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -43,12 +43,12 @@ retraction_extrusion_window = 1 retraction_hop_only_when_collides = True retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 +skin_line_width = =round(line_width / 0.8, 2) skin_overlap = 5 speed_equalize_flow_enabled = True speed_layer_0 = =math.ceil(speed_print * 18 / 25) speed_print = 25 -speed_topbottom = =math.ceil(speed_print * 25 / 25) - +speed_topbottom = =math.ceil(speed_print * 0.8) speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) support_angle = 50 |