Readd qualities

4 files changed, 141 insertions, 0 deletions

diff --git a/resources/quality/elegoo_neptune_2/elegoo_neptune_2_best.inst.cfg b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_best.inst.cfg
new file mode 100644
index 0000000000..1e56dcb94f
--- /dev/null
+++ b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_best.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Best
+definition = elegoo_neptune_2
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = Xfine
+weight = 1
+global_quality = True
+
+[values]
+acceleration_enabled = True
+jerk_enabled = True
+layer_height = 0.12
+layer_height_0 = 0.2
+support_enable = False
+
+coasting_enable = False
+infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1))))
+infill_pattern = grid
+infill_sparse_density = 15
+material_flow_layer_0 = 95
+retraction_amount = 6
+skirt_brim_speed = 25.0
+speed_layer_0 = 25.0
+speed_travel_layer_0 = 125.0
+speed_wall_x = 50.0
+top_bottom_thickness = 1
+travel_compensate_overlapping_walls_0_enabled = True
+wall_0_material_flow = 95
+wall_0_wipe_dist = 0.4
+wall_thickness = 1.2
+z_seam_type = sharpest_corner
\ No newline at end of file
diff --git a/resources/quality/elegoo_neptune_2/elegoo_neptune_2_coarse.inst.cfg b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_coarse.inst.cfg
new file mode 100644
index 0000000000..dd014f2e73
--- /dev/null
+++ b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_coarse.inst.cfg
@@ -0,0 +1,24 @@
+[general]
+version = 4
+name = Coarse
+definition = elegoo_neptune_2
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = coarse
+weight = -3
+global_quality = True
+
+[values]
+layer_height = 0.4
+layer_height_0 = 0.45
+top_thickness = 1.2
+bottom_thickness = 1.2
+speed_print = 50
+wall_thickness = 1.2
+wall_line_count = 3
+retraction_enable = true
+retraction_amount = 5
+retraction_speed = 70
+retraction_combing = noskin
\ No newline at end of file
diff --git a/resources/quality/elegoo_neptune_2/elegoo_neptune_2_normal.inst.cfg b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_normal.inst.cfg
new file mode 100644
index 0000000000..486d46a6d7
--- /dev/null
+++ b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_normal.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+version = 4
+name = Normal
+definition = elegoo_neptune_2
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = normal
+weight = 0
+global_quality = True
+
+[values]
+acceleration_enabled = True
+adhesion_type = skirt
+jerk_enabled = True
+layer_height = 0.2
+layer_height_0 = 0.2
+support_enable = False
+coasting_enable = False
+infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1))))
+infill_pattern = grid
+infill_sparse_density = 15
+material_flow_layer_0 = 95
+retraction_amount = 6
+skin_angles = [90 ]
+skin_line_width = =line_width
+skin_monotonic = True
+skin_outline_count = 0
+skin_overlap = 30.0
+skirt_brim_speed = 25.0
+speed_layer_0 = 25.0
+speed_travel_layer_0 = 125.0
+speed_wall_x = 50.0
+support_xy_distance = 0.2
+top_bottom_thickness = 1
+travel_compensate_overlapping_walls_0_enabled = True
+wall_0_inset = 0.2
+wall_0_material_flow = 95
+wall_0_wipe_dist = 0.4
+wall_thickness = 1.2
+z_seam_type = sharpest_corner
\ No newline at end of file
diff --git a/resources/quality/elegoo_neptune_2/elegoo_neptune_2_rough.inst.cfg b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_rough.inst.cfg
new file mode 100644
index 0000000000..db35887a98
--- /dev/null
+++ b/resources/quality/elegoo_neptune_2/elegoo_neptune_2_rough.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = Draft
+definition = elegoo_neptune_2
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = draft
+weight = -2
+global_quality = True
+
+[values]
+acceleration_enabled = True
+jerk_enabled = True
+layer_height = 0.28
+layer_height_0 = 0.28
+
+bottom_layers = =999999 if infill_sparse_density == 100 else math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))
+coasting_enable = False
+infill_line_distance = =0 if infill_sparse_density == 0 else (infill_line_width * 100) / infill_sparse_density * (2 if infill_pattern == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cubicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_pattern == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_pattern == 'cross_3d' else 1))))
+infill_pattern = grid
+infill_sparse_density = 10.0
+material_flow_layer_0 = 95
+retraction_amount = 6
+roofing_layer_count = 1
+skin_overlap = 15.0
+skirt_brim_speed = 25.0
+speed_layer_0 = 30.0
+speed_print = 60.0
+speed_travel_layer_0 = 125.0
+speed_wall_x = 50.0
+top_bottom_thickness = =layer_height_0+layer_height*3
+top_layers = =0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))
+travel_compensate_overlapping_walls_0_enabled = True
+wall_0_material_flow = 95
+wall_0_wipe_dist = 0.4
+wall_thickness = 1.2
+z_seam_corner = z_seam_corner_weighted
+z_seam_type = sharpest_corner
\ No newline at end of file