Processed review comments of Rijk van Manen + cleanup redundant support_z related settings

Relates to PP-108

90 files changed, 39 insertions, 116 deletions

diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
index 29ca032a8f..cd5a66151d 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
@@ -36,9 +36,7 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
-support_bottom_distance = 0.55
 support_enable = True
-support_top_distance = 0.55
-support_z_distance = =layer_height * 2
+support_z_distance = 0.55
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 55 / 55)
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
index bba4afe562..9f4c534c86 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
@@ -35,8 +35,7 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
-support_bottom_distance = 0.65
 support_enable = True
-support_top_distance = 0.5
-support_z_distance = =layer_height * 2
+support_z_distance = 0.5
+support_bottom_distance = 0.65
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
index 85b90363e0..ec0abd5a9e 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
@@ -56,10 +56,9 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
+support_z_distance = =layer_height * 2
 support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
 support_xy_distance_overhang = =wall_line_width_0
-support_z_distance = =layer_height * 2
 travel_avoid_distance = 3
 wall_0_inset = 0
 speed_wall_x = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
index 1321320f7c..855f5c2288 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
@@ -47,8 +47,7 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 travel_avoid_distance = 3
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
index 506c3447e5..aa17d74a70 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
@@ -46,9 +46,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
index cd497b6cb6..f3a1ea0e98 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
@@ -55,9 +55,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
index 789b607efc..8a1fbc5a07 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
@@ -46,9 +46,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
index 92bfc15b0b..b902d16032 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
@@ -55,9 +55,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.5
 travel_avoid_distance = 3
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
index 5d2bd1ff90..59834b551d 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
@@ -36,9 +36,7 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
-support_bottom_distance = 0.55
 support_enable = True
-support_top_distance = 0.55
-support_z_distance = =layer_height * 2
+support_z_distance = 0.55
 top_bottom_thickness = 1.2
 speed_infill = =math.ceil(speed_print * 55 / 55)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
index 3e0c8530f3..ee0a2bd2a5 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
@@ -34,8 +34,7 @@ speed_travel = 150
 speed_wall_0 = =math.ceil(speed_print * 15 / 55)
 speed_wall_x = =math.ceil(speed_print * 40 / 55)
 support_angle = 45
-support_bottom_distance = 0.65
 support_enable = True
-support_top_distance = 0.5
-support_z_distance = =layer_height * 2
+support_z_distance = 0.5
+support_bottom_distance = 0.65
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
index ee9fe2140f..fc24da0222 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
@@ -46,9 +46,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 travel_avoid_distance = 3
 wall_0_inset = 0
 speed_wall_x = =math.ceil(speed_print * 25 / 25)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
index 7dee4b485e..dde91c441c 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
@@ -46,8 +46,7 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 travel_avoid_distance = 3
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
index 4a78f43359..1b3024f709 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
@@ -45,9 +45,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
index f888b22fd6..6784ae2adb 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
@@ -45,9 +45,8 @@ speed_travel_layer_0 = 50
 speed_wall = =math.ceil(speed_print * 25 / 25)
 speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
-support_bottom_distance = =support_z_distance / 2
-support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
+support_bottom_distance = =support_z_distance / 2
 top_bottom_thickness = 1.1
 travel_avoid_distance = 3
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
index 30d20139e1..7a69d14931 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 40 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 50 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
index e213684360..e7b6c725dd 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 45 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
index 70c1b4afaa..fb2e0330ef 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -40,6 +40,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 35)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
index bd452fc538..074270e0ec 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -39,6 +39,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 35)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
index fd195c841d..df4ea5ffab 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
@@ -49,7 +49,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
index cada630bb9..5d01ce5f28 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
@@ -47,7 +47,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
index 1e7f439fac..dd6b9063b9 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
@@ -49,7 +49,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
index 2e7057947e..7bed5ac6d2 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -46,7 +46,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg
index ac2429595d..4a92c4e0ef 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg
@@ -30,6 +30,5 @@ speed_slowdown_layers = 15
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
index cfe6b1bf0a..58a7da1b9d 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -32,6 +32,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_infill = =math.ceil(speed_print * 40 / 50)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
index 45125d5893..901db7e3ab 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -32,6 +32,5 @@ speed_slowdown_layers = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
index 0ae86ae243..5ac58234fd 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
@@ -33,7 +33,6 @@ retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_travel = 300
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
index 8112cd6fb0..0975a2dcaa 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -34,7 +34,6 @@ retraction_prime_speed = 15
 speed_travel = 300
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 speed_infill = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
index 76ad9235ba..a18414cf7e 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -33,7 +33,6 @@ retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_travel = 300
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
index b1c73cd9cb..9d5a364a53 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -42,7 +42,6 @@ speed_travel = 300
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
index 2585eb3ebf..07c6aa807e 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -44,7 +44,6 @@ speed_wall = =speed_print
 speed_wall_x = =speed_print
 speed_infill = =speed_print
 support_angle = 50
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
index c020e5a80a..bc8a252e97 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -42,7 +42,6 @@ speed_travel = 300
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
index c5d46f2118..5ac88c13bc 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
@@ -22,4 +22,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
index a581965c9b..bc3928bab4 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
@@ -22,4 +22,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
index 4d390412d1..9dd15079c7 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
@@ -20,4 +20,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
index 5c7e0a89a0..7e22a08939 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -20,4 +20,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
index d3a3b5594f..d7003ca582 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
@@ -20,4 +20,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
index 4768e692d5..3fb4c5ea46 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -21,4 +21,4 @@ support_interface_height = 0.9
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
index b007c1cda4..f52206e9b3 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -21,4 +21,4 @@ support_infill_sparse_thickness = 0.3
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
index 6c7119b683..886807a836 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -39,7 +39,6 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
index b933ae005b..35c97346bb 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 40 / 50)
 
 speed_wall = =math.ceil(speed_print * 50 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
index 526e12bfe0..e6270bd4c5 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -39,6 +39,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 
 speed_wall = =math.ceil(speed_print * 45 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
index be5d77a69e..ef8cb6847a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -37,9 +37,7 @@ skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 30 / 35)
-
 speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
index bc16d73c04..4f99061468 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -37,9 +37,7 @@ skin_overlap = 20
 speed_layer_0 = =math.ceil(speed_print * 20 / 40)
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 30 / 35)
-
 speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
index 01a67d5e0c..c5c3570350 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@@ -47,7 +47,6 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
index dd9e932c32..2c9f109400 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@@ -42,10 +42,8 @@ skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
-
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
index 87e4c43f76..02454a7203 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@@ -45,10 +45,8 @@ skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
-
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
index 93196d462c..ce382e3dcf 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -43,10 +43,8 @@ skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
-
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
index 5086d8eb32..806da07969 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
@@ -33,6 +33,5 @@ speed_slowdown_layers = 15
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
index 2a2ea30d89..11b2706b28 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_infill = =math.ceil(speed_print * 40 / 50)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
index cef41e5cdc..5771c34f8d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -33,6 +33,5 @@ speed_slowdown_layers = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
index 1727dd8711..ad56f48c17 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
@@ -32,7 +32,6 @@ retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
index c71f536f40..ee9576aed8 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -33,7 +33,6 @@ retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 speed_infill = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
index 70583773b1..4f6c3fa1ed 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -31,7 +31,6 @@ retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
index 92930eae98..2fba108a33 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -39,7 +39,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 30)
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
index 229b010d6a..2fbc3d7118 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -41,7 +41,6 @@ speed_wall = =speed_print
 speed_wall_x = =speed_print
 speed_infill = =speed_print
 support_angle = 50
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
index 3ec91f0f9a..2e06b86620 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -39,7 +39,6 @@ speed_topbottom = =math.ceil(speed_print * 23 / 30)
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
index 8343bb99b9..852256ec7d 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
@@ -22,4 +22,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
index 4aa8e93a43..85e3e2530a 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
@@ -22,4 +22,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
index ed96d89bc0..5bcaf96f5f 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
@@ -20,4 +20,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
index 2fc9439071..7b31e48283 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -20,4 +20,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
index 8d8b2a8e8a..da87e8211f 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
@@ -21,4 +21,4 @@ support_infill_sparse_thickness = 0.3
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
index 5937c5be67..7e2103043f 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
@@ -20,4 +20,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
index 537a0f2cac..9b1583ed51 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -19,4 +19,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
index d560e748d7..28f069a61a 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -20,4 +20,4 @@ support_infill_sparse_thickness = 0.3
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index 20d644b0ac..0ee0d7cbe9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -38,7 +38,6 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
index fc2156acf5..267a36d681 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 40 / 50)
 
 speed_wall = =math.ceil(speed_print * 50 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
index 9a17e20047..c493b0d445 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -38,6 +38,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 45)
 
 speed_wall = =math.ceil(speed_print * 45 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
index 1511dd698e..500f0a4428 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
@@ -40,6 +40,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 35)
 
 speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
index 881e89d91b..ccedad12ec 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -39,6 +39,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 35)
 
 speed_wall = =math.ceil(speed_print * 35 / 40)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 wall_0_inset = 0
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index 1137a88abf..26184e715b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -45,7 +45,6 @@ speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index d2887d38a9..f739e1c5ac 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -45,7 +45,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index deac4e0d75..aec7cc4293 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -44,10 +44,8 @@ skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
-
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index 4cca702d7c..3346f39efe 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -42,10 +42,8 @@ skin_overlap = 30
 speed_layer_0 = =math.ceil(speed_print * 25 / 50)
 speed_print = 50
 speed_topbottom = =math.ceil(speed_print * 25 / 50)
-
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
index 4b126d98be..53f58530b9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg
@@ -32,6 +32,5 @@ speed_slowdown_layers = 15
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
index 7f3b35fa36..b5a7bf5de0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg
@@ -34,6 +34,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_infill = =math.ceil(speed_print * 40 / 50)
-support_bottom_distance = =support_z_distance
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
index 072880b756..4dcbf91e6a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg
@@ -33,7 +33,5 @@ speed_slowdown_layers = 10
 speed_topbottom = =math.ceil(speed_print * 35 / 50)
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
-support_bottom_distance = =support_z_distance
-
 support_z_distance = =layer_height
 top_bottom_thickness = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
index 6ac4b46773..e6f87c3442 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
@@ -32,7 +32,6 @@ retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
index 20b1255a88..324b121ca7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -33,7 +33,6 @@ retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 speed_infill = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
index be840f56b1..67cd7d50ac 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -31,7 +31,6 @@ retraction_hop = 0.5
 retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
index 0cdd20604a..e132129969 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
@@ -39,7 +39,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 30)
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index 3e85f26972..410d07b902 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -40,7 +40,6 @@ speed_wall = =speed_print
 speed_wall_x = =speed_print
 speed_infill = =speed_print
 support_angle = 50
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
index 9ea2343841..c4d48a2f6c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -39,7 +39,6 @@ speed_topbottom = =math.ceil(speed_print * 23 / 30)
 speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
-support_bottom_distance = =support_z_distance
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
index 95b2856700..cdb8384f68 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
@@ -22,4 +22,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
index 23db0e35cb..f69ecfbb94 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
@@ -22,4 +22,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
index c14da45c48..17b3dd2467 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
@@ -20,4 +20,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
index fb8e3e065b..47dcbe57fa 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -20,4 +20,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
index 49c15b95ee..5159a13173 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
@@ -23,4 +23,4 @@ support_interface_height = 1.2
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
index 910aeb9b96..0259c3040f 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
@@ -20,4 +20,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
index 893f1674bc..c1768abc54 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -19,4 +19,4 @@ support_brim_enable = True
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
index d0df2dca43..315ee5748f 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -20,4 +20,4 @@ support_infill_sparse_thickness = 0.3
 support_interface_enable = True
 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width))
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
-support_use_towers = True
\ No newline at end of file
+support_use_towers = True