Cleaned up of the support settings for the S5 quality modes.

Relates to PP-108

24 files changed, 0 insertions, 42 deletions

diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index ec8409137c..20d644b0ac 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -40,7 +40,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg
index c622591c90..aa575d573e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg
@@ -27,13 +27,7 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 top_bottom_thickness = 1
 support_brim_enable = True
-support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg
index e399b3c988..d4918ec6a3 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg
@@ -26,13 +26,7 @@ speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 top_bottom_thickness = 1
 support_brim_enable = True
-support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg
index 7cd771e0fb..5a0783f3a4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg
@@ -24,14 +24,8 @@ prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 support_brim_enable = True
-support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
 top_bottom_thickness = 1
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index 1e2f58a3c3..1137a88abf 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -47,7 +47,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index ce5d8a5c89..d2887d38a9 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -47,7 +47,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index 99d5d7ef1d..deac4e0d75 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -49,7 +49,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index 15b7a619e8..4cca702d7c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -47,7 +47,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
index f45f9f403a..89a55e3f6f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -26,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg
index 4ad620367d..9575708085 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg
@@ -25,7 +25,6 @@ material_shrinkage_percentage_xy = 100.2
 material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg
index 7acfa04a29..d85aeb3f9b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg
@@ -26,7 +26,6 @@ material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 raft_margin = 10
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg
index 756316ed7f..e39360b6ca 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg
@@ -25,7 +25,6 @@ material_shrinkage_percentage_xy = 100.2
 material_shrinkage_percentage_z = 100.1
 prime_tower_enable = True
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
 retract_at_layer_change = False
 speed_print = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
index aa86db8c84..6ac4b46773 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
@@ -33,7 +33,6 @@ retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
index 4bf0036315..20b1255a88 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -34,7 +34,6 @@ retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 speed_infill = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
index 69a33b38f8..be840f56b1 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -32,7 +32,6 @@ retraction_min_travel = 1.5
 retraction_prime_speed = 15
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg
index 7587ebf336..fbf2ad1733 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Draft_Print.inst.cfg
@@ -32,5 +32,4 @@ speed_topbottom = =round(speed_print * 35 / 45)
 speed_wall = =round(speed_print * 40 / 45)
 speed_wall_0 = =round(speed_print * 35 / 45)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 6
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
index 9301d7d69f..0cdd20604a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
@@ -40,7 +40,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index f410bd8c85..3e85f26972 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -41,7 +41,6 @@ speed_wall_x = =speed_print
 speed_infill = =speed_print
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
index 3df2f2ca0e..9ea2343841 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -40,7 +40,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
index 9a8a17da20..46fe19534f 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -16,4 +16,3 @@ brim_replaces_support = False
 material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
-support_interface_height = 0.9
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
index 4229ad1758..48543745dd 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -17,4 +17,3 @@ material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
-support_interface_height = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg
index 6a4115dd82..d6f54f2e49 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg
@@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg
index 7392f4e6ee..c11af88907 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg
@@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg
index 053b9399a5..a2769f7e88 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg
@@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4