Cleaned up of the support settings for quality modes.

Relates to PP-108

8 files changed, 0 insertions, 14 deletions

diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
index 96c0b34b82..156fe0611b 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
@@ -48,7 +48,6 @@ speed_wall_0 = =math.ceil(speed_wall * 20 / 25)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
 support_top_distance = =support_z_distance
-support_xy_distance = =wall_line_width_0 * 2.5
 support_xy_distance_overhang = =wall_line_width_0
 support_z_distance = =layer_height * 2
 top_bottom_thickness = 1.1
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
index b7259ce379..766a84d843 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg
index f9a294d572..cbb90b0098 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg
@@ -27,13 +27,7 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 top_bottom_thickness = 1
 support_brim_enable = True
-support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = 0.3
 support_bottom_distance = 0.3
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
index e9bc1e9239..5a1a8ee5c1 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -26,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
index 8cb2823432..c1b0737a24 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -28,7 +28,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg
index b6cd8788b0..5683956267 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Superdraft_Print.inst.cfg
@@ -34,5 +34,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 25/ 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg
index 522cb974ce..cb2430636a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPLA_Verydraft_Print.inst.cfg
@@ -35,5 +35,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35)
 speed_wall = =math.ceil(speed_print * 25/ 35)
 speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg
index 9835e46e5d..24515461c7 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg
@@ -34,6 +34,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4