remove setting, follow the default

PP-170

33 files changed, 0 insertions, 45 deletions

diff --git a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg
index c63858f825..a24b18563d 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cpe
 variant = AA 0.25
 
 [values]
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
index c17554a0cc..8ccde4e1b5 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg
index 36a3e23c27..ce7087bf3a 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg
@@ -12,7 +12,6 @@ material = generic_petg
 variant = AA 0.25
 
 [values]
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
index f2b4caf168..82286bb5ab 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -29,7 +29,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
index addd4790db..42a0354547 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -29,7 +29,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
index 3c1baa8640..5f5d7c937b 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -31,7 +31,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
index e0c239c536..6004eeb842 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
index f33132ee5b..3567b809ec 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
@@ -39,8 +39,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
index 8c02c9c816..b21915617b 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
@@ -37,8 +37,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
index 4ff801f4fa..07ce23faa9 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
@@ -39,8 +39,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
index 180d96011d..7bdee75d36 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -36,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg
index d875b9c8f3..5ced8748b1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_CPE_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
index a3a0073bba..071db69a43 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
index 516f24dec5..6c3a7e7a81 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 8
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
index 0b8555734e..8a060fd258 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -28,7 +28,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
index f3dce95478..526e12bfe0 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -28,7 +28,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
index f895647971..28f01d544b 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -30,7 +30,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
index bba0f354c9..abb7689a38 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
index 85d31733e6..5190288662 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@@ -38,8 +38,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
index a9cdf6336d..0d88afb30a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@@ -36,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
index ff5d6f4f7c..c694b5db79 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@@ -38,8 +38,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
index a61e50f280..5287ce24c4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -36,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg
index 52499d000c..f895450c0a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_CPE_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index e77d2a2dd9..0d6cc0cd78 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -30,7 +30,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
index 7a3b50c550..76c8372166 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 
 [values]
 retraction_combing_max_distance = 8
-retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
index 1d12f8f8d9..83833939fc 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -28,7 +28,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
index 12db110133..9b2e84614b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -28,7 +28,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
index eb4db520bd..d6a0d6306d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg
@@ -30,7 +30,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
index 71102926d8..f087010c9e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -29,7 +29,6 @@ multiple_mesh_overlap = 0
 prime_tower_enable = True
 prime_tower_wipe_enabled = True
 retraction_combing_max_distance = 50
-retraction_extrusion_window = 1
 retraction_hop = 0.2
 retraction_hop_enabled = False
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index d9bc39705b..997bdfcd88 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -37,8 +37,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index 03999c27e1..8b8a21911b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -36,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index de05aa5cac..73e151926c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -38,8 +38,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index 658e118686..5343242e32 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -36,8 +36,6 @@ prime_tower_enable = True
 prime_tower_wipe_enabled = True
 raft_airgap = 0.25
 raft_interface_thickness = =max(layer_height * 1.5, 0.225)
-retraction_count_max = 80
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8