diff options
author | Rijk van Manen <r.vanmanen@ultimaker.com> | 2022-05-30 14:47:45 +0300 |
---|---|---|
committer | Rijk van Manen <r.vanmanen@ultimaker.com> | 2022-05-30 14:47:45 +0300 |
commit | 59d3c6b165fdd9522667cc3f504f1fbdc90fffca (patch) | |
tree | 8dc3771336c371586cbb106a5c6326f44f1e9600 /resources/quality | |
parent | adf83f002f296703db07ab2c1097483f61882312 (diff) |
entirely remove the top_thickness statementPP-15-enable-skin-edge-support
This is a cleanup which will be investigated further in PP-23
Diffstat (limited to 'resources/quality')
-rw-r--r-- | resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg | 1 | ||||
-rw-r--r-- | resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg | 1 |
2 files changed, 0 insertions, 2 deletions
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg index 1ef240ab01..bdfd6aadea 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg @@ -23,6 +23,5 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -top_thickness = =0.8 if infill_sparse_density < 30 else top_bottom_thickness infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg index bb5862ae67..bedfaa177a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg @@ -24,7 +24,6 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) -top_thickness = =0.8 if infill_sparse_density < 30 else top_bottom_thickness infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' speed_infill = =math.ceil(speed_print * 50 / 60) initial_layer_line_width_factor = 100 |