diff options
author | THeijmans <t.heijmans@ultimaker.com> | 2021-09-15 13:59:00 +0300 |
---|---|---|
committer | THeijmans <t.heijmans@ultimaker.com> | 2021-09-15 13:59:00 +0300 |
commit | 6a4f59c27a0869afb91e257dfbe206384fcd0149 (patch) | |
tree | 094ae1b22f638b2ace29f42caa2a672beec91f5a /resources/quality | |
parent | 92085d488ca055bf8c30dbc1b37c93bd841d1e5f (diff) |
Updates Jerk settings to a minimum of 20mmps
For PP-1
Diffstat (limited to 'resources/quality')
18 files changed, 54 insertions, 65 deletions
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 429a2b2b7b..456c3381c9 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index d026ef1012..f56455517d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 3980068d66..01354446c4 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) layer_height = 0.3 material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 41ef63bf46..fa31602dc8 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -20,9 +20,9 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 6a3fba05e7..ab697e5487 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -20,9 +20,9 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) layer_height = 0.4 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 97d78377fb..9ab587c1c4 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -20,9 +20,9 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) layer_height = 0.3 machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index d83549604e..c02b61f9cc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index deeeb49445..19ad60d6b3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index 40d19f3f33..e84a2c753b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index aaebd2c3e9..97cb06d3f7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -18,9 +18,9 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index 96dc62bfb8..2357faa842 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -19,9 +19,9 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -58,5 +58,4 @@ travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index c816568da0..143e41d1d4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -19,9 +19,9 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -57,5 +57,4 @@ travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg index 1d30f3b80d..11a00e7466 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg @@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -37,7 +37,6 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.7 / 0.8, 2) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 5c6247bad8..2f1d841329 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -37,7 +37,6 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.7 / 0.8, 2) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg index 9df8d24ede..cc6c666d45 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg @@ -19,9 +19,9 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = tetrahedral -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 @@ -36,7 +36,6 @@ retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) - speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.7 / 0.8, 2) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index 0bdf141bbd..3592e721d7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -18,9 +18,9 @@ top_skin_expand_distance = =line_width * 2 infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -42,7 +42,6 @@ retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 @@ -57,5 +56,4 @@ travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 4fc076ea74..460dd06716 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -19,9 +19,9 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -43,7 +43,6 @@ retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 @@ -58,5 +57,4 @@ travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index 603e3ffb14..49aef7edde 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -19,9 +19,9 @@ infill_before_walls = True infill_line_width = =round(line_width * 0.7 / 0.8, 2) infill_pattern = cross_3d infill_sparse_density = 10 -jerk_prime_tower = =math.ceil(jerk_print * 25 / 25) -jerk_support = =math.ceil(jerk_print * 25 / 25) -jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25) +jerk_prime_tower = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_support = =max(math.ceil(jerk_print * 25 / 25), 20) +jerk_wall_0 = =max(math.ceil(jerk_wall * 15 / 25), 20) machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature @@ -42,7 +42,6 @@ retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 23 / 30) - speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 @@ -57,5 +56,4 @@ travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) wall_thickness = 1.3 - jerk_travel = 50 |