clean up adhesion_typePP-235-clean-up-adhesion_type

S-line printers can follow the machine default. PP-brim will be moved to fdm materials. PP-235

42 files changed, 0 insertions, 80 deletions

diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
index 886807a836..49ecf8eb7c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
index ea80f381a1..5d04d3730c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -12,11 +12,8 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-
-
 material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
index d9ba64ae04..ee6b31d104 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -12,11 +12,8 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-
-
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
index 8a6d73d6ca..81fa776bba 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
@@ -12,11 +12,8 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 15
-
-
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
index 8688939b35..3b785f2999 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -12,11 +12,8 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
-
-
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
index d02bf873f4..a0fae041a4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
@@ -12,13 +12,11 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 90
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 6
-
 infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
index f15ca790ed..7b26bb0613 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 85
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
index 330ccb1d66..893fc789f2 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
@@ -12,7 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
index e931b99e4d..ef6fc99b12 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -12,7 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
index ee5eb84f18..0ad61736ab 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
index 27aa351fcb..758a81d3a8 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
index 308f7d4659..a0ca08eb8a 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
index efd383a565..d538f95bea 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
index 31dffcd0fa..2caa3776eb 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
index 5086b257e2..f9fffb3171 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
index 4fecd89e67..465bff3d8d 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
index 0355b4906d..40df72973c 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
@@ -12,14 +12,11 @@ material = generic_gffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
index 4dbf39a83e..8a617f2d04 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffcpe
 variant = CC 0.6
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
index fdaa98e8e3..9c396012bb 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_cffpa
 variant = CC 0.6
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
index 06e1b1e186..de38df43ee 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffcpe
 variant = CC 0.6
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
index 3e570585d5..5b3c0024ab 100644
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffpa
 variant = CC 0.6
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
index 0ee0d7cbe9..21619933c7 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg
@@ -13,7 +13,6 @@ variant = AA 0.25
 is_experimental = True
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
index ab5ee10570..de31626bc4 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
 material_print_temperature = =default_material_print_temperature + 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
index e0d5fd698f..76637899fc 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -12,11 +12,8 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 10
-
-
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
index 11369becf7..b0c2360339 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@@ -12,11 +12,8 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 15
-
-
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
index c5076d7b11..4c1c0a1871 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -12,11 +12,8 @@ material = generic_nylon
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 cool_min_layer_time_fan_speed_max = 20
 cool_min_speed = 12
-
-
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
index ad46d3ba5c..11c316f5d6 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 90
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
index 0bd02289de..fd8f30f78f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 85
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
index f5bf35a232..c3cff67a2c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_High_Quality.inst.cfg
@@ -12,13 +12,11 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 8
-
 infill_overlap = 0
 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
index a4c0c3d365..868de66c25 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Normal_Quality.inst.cfg
@@ -12,13 +12,11 @@ material = generic_pc
 variant = AA 0.4
 
 [values]
-adhesion_type = brim
 brim_width = 20
 cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 50
 cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 5
-
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0.1
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
index cb1a50803c..0e738f1e3d 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg
@@ -12,14 +12,11 @@ material = generic_cffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
index ce03a5ae09..e0d01ba82f 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg
@@ -12,14 +12,11 @@ material = generic_cffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
index 3036247066..52d0a07ea5 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg
@@ -12,14 +12,11 @@ material = generic_cffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
index a399338789..86dad3779b 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg
@@ -12,14 +12,11 @@ material = generic_cffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
index dfcf839d41..da79e206cf 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg
@@ -12,14 +12,11 @@ material = generic_gffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
index 2b7a43ccfc..644b964c28 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg
@@ -12,14 +12,11 @@ material = generic_gffcpe
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
index 918680ec18..2977a497eb 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg
@@ -12,14 +12,11 @@ material = generic_gffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
index 67fb7b24c1..a339098b6a 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg
@@ -12,14 +12,11 @@ material = generic_gffpa
 variant = CC 0.4
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
-
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
index d91ade8af3..dd2f4231c7 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg
@@ -12,12 +12,10 @@ material = generic_cffcpe
 variant = CC 0.6
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
index 087a3868bf..eb2cc63b78 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg
@@ -12,12 +12,10 @@ material = generic_cffpa
 variant = CC 0.6
 
 [values]
-adhesion_type = skirt
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
index 431a570dc0..e5bc3d2e5b 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg
@@ -12,12 +12,10 @@ material = generic_gffcpe
 variant = CC 0.6
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15
 cool_min_speed = 6
-
 initial_layer_line_width_factor = 130.0
 material_bed_temperature_layer_0 = =material_bed_temperature + 5
 material_print_temperature = =default_material_print_temperature
diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
index 29e0335e9e..72e1c0f4fe 100644
--- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg
@@ -12,7 +12,6 @@ material = generic_gffpa
 variant = CC 0.6
 
 [values]
-adhesion_type = brim
 cool_fan_enabled = True
 cool_min_layer_time = 7
 cool_min_layer_time_fan_speed_max = 15