Merge pull request #8546 from liquid-printer/add-Liquid-printer

Added Liquid 3D printer configurations

68 files changed, 2580 insertions, 0 deletions

diff --git a/resources/quality/liquid/liquid_global_Draft_Quality.inst.cfg b/resources/quality/liquid/liquid_global_Draft_Quality.inst.cfg
new file mode 100644
index 0000000000..fa4dcd6807
--- /dev/null
+++ b/resources/quality/liquid/liquid_global_Draft_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+global_quality = True
+
+[values]
+layer_height = 0.2
diff --git a/resources/quality/liquid/liquid_global_Fast_Quality.inst.cfg b/resources/quality/liquid/liquid_global_Fast_Quality.inst.cfg
new file mode 100644
index 0000000000..b12e9ad52e
--- /dev/null
+++ b/resources/quality/liquid/liquid_global_Fast_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Normal
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+global_quality = True
+
+[values]
+layer_height = 0.15
diff --git a/resources/quality/liquid/liquid_global_High_Quality.inst.cfg b/resources/quality/liquid/liquid_global_High_Quality.inst.cfg
new file mode 100644
index 0000000000..cecbdd1b80
--- /dev/null
+++ b/resources/quality/liquid/liquid_global_High_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Extra Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+global_quality = True
+
+[values]
+layer_height = 0.06
diff --git a/resources/quality/liquid/liquid_global_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_global_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..b44c43d3c7
--- /dev/null
+++ b/resources/quality/liquid/liquid_global_Normal_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.1
diff --git a/resources/quality/liquid/liquid_global_Superdraft_Quality.inst.cfg b/resources/quality/liquid/liquid_global_Superdraft_Quality.inst.cfg
new file mode 100644
index 0000000000..67ff310e8c
--- /dev/null
+++ b/resources/quality/liquid/liquid_global_Superdraft_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Sprint
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = superdraft
+weight = -4
+global_quality = True
+
+[values]
+layer_height = 0.4
diff --git a/resources/quality/liquid/liquid_global_Verydraft_Quality.inst.cfg b/resources/quality/liquid/liquid_global_Verydraft_Quality.inst.cfg
new file mode 100644
index 0000000000..b5713aff75
--- /dev/null
+++ b/resources/quality/liquid/liquid_global_Verydraft_Quality.inst.cfg
@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Extra Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = verydraft
+weight = -3
+global_quality = True
+
+[values]
+layer_height = 0.3
diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..e882694cdb
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_abs
+variant = VO 0.4
+
+[values]
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature + 20
+material_initial_print_temperature = =material_print_temperature - 15
+material_final_print_temperature = =material_print_temperature - 20
+prime_tower_enable = False
+skin_overlap = 20
+speed_print = 60
+speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_topbottom = =math.ceil(speed_print * 35 / 60)
+speed_wall = =math.ceil(speed_print * 45 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+wall_thickness = 1
+
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+speed_infill = =math.ceil(speed_print * 50 / 60)
+
diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..d05a0e3505
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg
@@ -0,0 +1,30 @@
+[general]
+version = 4
+name = Normal
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_abs
+variant = VO 0.4
+
+[values]
+cool_min_speed = 7
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature + 15
+material_initial_print_temperature = =material_print_temperature - 15
+material_final_print_temperature = =material_print_temperature - 20
+prime_tower_enable = False
+speed_print = 60
+speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_wall = =math.ceil(speed_print * 40 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+speed_infill = =math.ceil(speed_print * 45 / 60)
+
diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg
new file mode 100644
index 0000000000..dbed018698
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Extra Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_abs
+variant = VO 0.4
+
+[values]
+cool_min_speed = 12
+machine_nozzle_cool_down_speed = 0.8
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature - 15
+material_final_print_temperature = =material_print_temperature - 20
+prime_tower_enable = False
+speed_print = 50
+speed_layer_0 = =math.ceil(speed_print * 20 / 50)
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 30 / 50)
+
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+speed_infill = =math.ceil(speed_print * 40 / 50)
+
diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..ba39c4a6ce
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_abs
+variant = VO 0.4
+
+[values]
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature + 10
+material_initial_print_temperature = =material_print_temperature - 15
+material_final_print_temperature = =material_print_temperature - 20
+prime_tower_enable = False
+speed_print = 55
+speed_layer_0 = =math.ceil(speed_print * 20 / 55)
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+speed_wall = =math.ceil(speed_print * 30 / 55)
+
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+speed_infill = =math.ceil(speed_print * 40 / 55)
diff --git a/resources/quality/liquid/liquid_vo0.4_CPE_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_CPE_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..3a72aa9d92
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_CPE_Draft_Print.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_cpe
+variant = VO 0.4
+
+[values]
+material_print_temperature = =default_material_print_temperature + 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+retraction_combing_max_distance = 50
+skin_overlap = 20
+speed_print = 60
+speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_topbottom = =math.ceil(speed_print * 35 / 60)
+speed_wall = =math.ceil(speed_print * 45 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+wall_thickness = 1
+
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 50 / 60)
diff --git a/resources/quality/liquid/liquid_vo0.4_CPE_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_CPE_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..c5474f8f0c
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_CPE_Fast_Print.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+version = 4
+name = Normal
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_cpe
+variant = VO 0.4
+
+[values]
+cool_min_speed = 7
+material_print_temperature = =default_material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+retraction_combing_max_distance = 50
+speed_print = 60
+speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_wall = =math.ceil(speed_print * 40 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 50 / 60)
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.4_CPE_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_CPE_High_Quality.inst.cfg
new file mode 100644
index 0000000000..b396232f67
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_CPE_High_Quality.inst.cfg
@@ -0,0 +1,28 @@
+[general]
+version = 4
+name = Extra Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_cpe
+variant = VO 0.4
+
+[values]
+cool_min_speed = 12
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_print_temperature = =default_material_print_temperature - 5
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+retraction_combing_max_distance = 50
+speed_print = 50
+speed_layer_0 = =math.ceil(speed_print * 20 / 50)
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 30 / 50)
+
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 40 / 50)
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_CPE_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..b8edf5ef16
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_CPE_Normal_Quality.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+version = 4
+name = Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_cpe
+variant = VO 0.4
+
+[values]
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+retraction_combing_max_distance = 50
+speed_print = 55
+speed_layer_0 = =math.ceil(speed_print * 20 / 55)
+speed_topbottom = =math.ceil(speed_print * 30 / 55)
+speed_wall = =math.ceil(speed_print * 30 / 55)
+
+infill_pattern = triangles
+speed_infill = =math.ceil(speed_print * 45 / 55)
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_Nylon_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..e2c32638e1
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_Nylon_Draft_Print.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_nylon
+variant = VO 0.4
+
+[values]
+adhesion_type = brim
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 10
+infill_line_width = =round(line_width * 0.5 / 0.4, 2)
+line_width = =machine_nozzle_size
+material_print_temperature = =default_material_print_temperature + 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+ooze_shield_angle = 40
+raft_acceleration = =acceleration_layer_0
+raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
+raft_jerk = =jerk_layer_0
+raft_margin = 10
+raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+skin_overlap = 50
+speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+switch_extruder_prime_speed = 30
+switch_extruder_retraction_amount = 30
+switch_extruder_retraction_speeds = 40
+wall_line_width_x = =wall_line_width
+
+jerk_travel = 20
diff --git a/resources/quality/liquid/liquid_vo0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_Nylon_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..ce9fe8adce
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_Nylon_Fast_Print.inst.cfg
@@ -0,0 +1,38 @@
+[general]
+version = 4
+name = Normal
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_nylon
+variant = VO 0.4
+
+[values]
+adhesion_type = brim
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 10
+infill_line_width = =round(line_width * 0.5 / 0.4, 2)
+line_width = =machine_nozzle_size
+material_print_temperature = =default_material_print_temperature + 5
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+ooze_shield_angle = 40
+raft_acceleration = =acceleration_layer_0
+raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
+raft_jerk = =jerk_layer_0
+raft_margin = 10
+raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+skin_overlap = 50
+speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+switch_extruder_prime_speed = 30
+switch_extruder_retraction_amount = 30
+switch_extruder_retraction_speeds = 40
+wall_line_width_x = =wall_line_width
+
+jerk_travel = 20
diff --git a/resources/quality/liquid/liquid_vo0.4_Nylon_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_Nylon_High_Quality.inst.cfg
new file mode 100644
index 0000000000..cc32585272
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_Nylon_High_Quality.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 4
+name = Extra Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_nylon
+variant = VO 0.4
+
+[values]
+adhesion_type = brim
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 15
+infill_line_width = =round(line_width * 0.5 / 0.4, 2)
+line_width = =machine_nozzle_size
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+ooze_shield_angle = 40
+raft_acceleration = =acceleration_layer_0
+raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
+raft_jerk = =jerk_layer_0
+raft_margin = 10
+raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+skin_overlap = 50
+speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+switch_extruder_prime_speed = 30
+switch_extruder_retraction_amount = 30
+switch_extruder_retraction_speeds = 40
+wall_line_width_x = =wall_line_width
+
+jerk_travel = 20
diff --git a/resources/quality/liquid/liquid_vo0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_Nylon_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..23f565b2b5
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_Nylon_Normal_Quality.inst.cfg
@@ -0,0 +1,37 @@
+[general]
+version = 4
+name = Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_nylon
+variant = VO 0.4
+
+[values]
+adhesion_type = brim
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 12
+infill_line_width = =round(line_width * 0.5 / 0.4, 2)
+line_width = =machine_nozzle_size
+material_initial_print_temperature = =material_print_temperature - 5
+material_final_print_temperature = =material_print_temperature - 10
+material_standby_temperature = 100
+ooze_shield_angle = 40
+raft_acceleration = =acceleration_layer_0
+raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
+raft_jerk = =jerk_layer_0
+raft_margin = 10
+raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+skin_overlap = 50
+speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+switch_extruder_prime_speed = 30
+switch_extruder_retraction_amount = 30
+switch_extruder_retraction_speeds = 40
+wall_line_width_x = =wall_line_width
+
+jerk_travel = 20
diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..743ac94ebd
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg
@@ -0,0 +1,63 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pc
+variant = VO 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + layer_height
+cool_fan_speed_max = 90
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 6
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+infill_overlap = 0
+infill_overlap_mm = 0.05
+infill_pattern = triangles
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 15
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_print_temperature = =default_material_print_temperature + 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+ooze_shield_angle = 40
+prime_tower_enable = True
+prime_tower_wipe_enabled = True
+raft_airgap = 0.25
+raft_interface_thickness = =max(layer_height * 1.5, 0.225)
+retraction_count_max = 80
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 15
+skin_overlap = 30
+speed_layer_0 = =math.ceil(speed_print * 25 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_density = 87.5
+support_interface_pattern = lines
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+wall_thickness = 1.2
diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..7e7b1dd466
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg
@@ -0,0 +1,63 @@
+[general]
+version = 4
+name = Normal
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_pc
+variant = VO 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + layer_height
+cool_fan_speed_max = 85
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 7
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+infill_overlap_mm = 0.05
+infill_pattern = triangles
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 15
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_print_temperature = =default_material_print_temperature + 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+ooze_shield_angle = 40
+prime_tower_enable = True
+prime_tower_wipe_enabled = True
+raft_airgap = 0.25
+raft_interface_thickness = =max(layer_height * 1.5, 0.225)
+retraction_count_max = 80
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 15
+skin_overlap = 30
+speed_layer_0 = =math.ceil(speed_print * 25 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_density = 87.5
+support_interface_pattern = lines
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+wall_thickness = 1.2
diff --git a/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg
new file mode 100644
index 0000000000..ea9a0a9c65
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg
@@ -0,0 +1,64 @@
+[general]
+version = 4
+name = Extra Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_pc
+variant = VO 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + layer_height
+cool_fan_speed_max = 50
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 8
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+infill_overlap = 0
+infill_overlap_mm = 0.05
+infill_pattern = triangles
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 15
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_print_temperature = =default_material_print_temperature - 10
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+ooze_shield_angle = 40
+prime_tower_enable = True
+prime_tower_wipe_enabled = True
+raft_airgap = 0.25
+raft_interface_thickness = =max(layer_height * 1.5, 0.225)
+retraction_count_max = 80
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 15
+skin_overlap = 30
+speed_layer_0 = =math.ceil(speed_print * 25 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_density = 87.5
+support_interface_pattern = lines
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+wall_thickness = 1.2
diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..6dca6308f2
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg
@@ -0,0 +1,62 @@
+[general]
+version = 4
+name = Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pc
+variant = VO 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+adhesion_type = brim
+brim_width = 20
+cool_fan_full_at_height = =layer_height_0 + layer_height
+cool_fan_speed_max = 50
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 5
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+infill_overlap = 0
+infill_pattern = triangles
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 15
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+ooze_shield_angle = 40
+prime_tower_enable = True
+prime_tower_wipe_enabled = True
+raft_airgap = 0.25
+raft_interface_thickness = =max(layer_height * 1.5, 0.225)
+retraction_count_max = 80
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 15
+skin_overlap = 30
+speed_layer_0 = =math.ceil(speed_print * 25 / 50)
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
+support_bottom_distance = =support_z_distance
+support_interface_density = 87.5
+support_interface_pattern = lines
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+wall_0_inset = 0
+wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+wall_thickness = 1.2
diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..15880e38d6
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_petg
+variant = VO 0.4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 5
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 20
+speed_print = 70
+speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_topbottom = =math.ceil(speed_print * 40 / 70)
+speed_wall = =math.ceil(speed_print * 55 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
+top_bottom_thickness = 0.8
+wall_thickness = 0.8
+
+jerk_travel = 20
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+infill_sparse_density = 15
+layer_height_0 = 0.2
+acceleration_wall = 2000
+acceleration_wall_0 = 2000
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..33d7a80374
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Normal
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_petg
+variant = VO 0.4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+speed_print = 60
+speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_topbottom = =math.ceil(speed_print * 35 / 60)
+speed_wall = =math.ceil(speed_print * 45 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 60)
+top_bottom_thickness = 1
+wall_thickness = 1
+
+jerk_travel = 20
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+layer_height_0 = 0.2
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg
new file mode 100644
index 0000000000..1e53fa09d0
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Extra Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_petg
+variant = VO 0.4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 10
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature - 5
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+speed_print = 50
+speed_layer_0 = =math.ceil(speed_print * 20 / 50)
+speed_topbottom = =math.ceil(speed_print * 35 / 50)
+speed_wall = =math.ceil(speed_print * 35 / 50)
+top_bottom_thickness = 1
+wall_thickness = 1
+
+jerk_travel = 20
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+layer_height_0 = 0.2
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..91bf2d713b
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_petg
+variant = VO 0.4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+top_bottom_thickness = 1
+wall_thickness = 1
+
+jerk_travel = 20
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+layer_height_0 = 0.2
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..e33244adfb
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg
@@ -0,0 +1,36 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pla
+variant = VO 0.4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 5
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 20
+speed_print = 70
+speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_topbottom = =math.ceil(speed_print * 40 / 70)
+speed_wall = =math.ceil(speed_print * 55 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 45 / 50)
+top_bottom_thickness = 0.8
+wall_thickness = 0.8
+
+jerk_travel = 20
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+infill_sparse_density = 15
+layer_height_0 = 0.2
+acceleration_wall = 2000
+acceleration_wall_0 = 2000
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..4aad3db5ec
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Normal
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_pla
+variant = VO 0.4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+speed_print = 60
+speed_layer_0 = =math.ceil(speed_print * 20 / 60)
+speed_topbottom = =math.ceil(speed_print * 35 / 60)
+speed_wall = =math.ceil(speed_print * 45 / 60)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 60)
+top_bottom_thickness = 1
+wall_thickness = 1
+
+jerk_travel = 20
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+layer_height_0 = 0.2
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg
new file mode 100644
index 0000000000..e94c97116f
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg
@@ -0,0 +1,33 @@
+[general]
+version = 4
+name = Extra Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = high
+weight = 1
+material = generic_pla
+variant = VO 0.4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 10
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature - 5
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+speed_print = 50
+speed_layer_0 = =math.ceil(speed_print * 20 / 50)
+speed_topbottom = =math.ceil(speed_print * 35 / 50)
+speed_wall = =math.ceil(speed_print * 35 / 50)
+top_bottom_thickness = 1
+wall_thickness = 1
+
+jerk_travel = 20
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+layer_height_0 = 0.2
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..53b7b837cb
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg
@@ -0,0 +1,29 @@
+[general]
+version = 4
+name = Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pla
+variant = VO 0.4
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+cool_min_speed = 7
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_standby_temperature = 100
+prime_tower_enable = False
+skin_overlap = 10
+speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+top_bottom_thickness = 1
+wall_thickness = 1
+
+jerk_travel = 20
+infill_line_width = =round(line_width * 0.42 / 0.35, 2)
+layer_height_0 = 0.2
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..58dc4490c9
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg
@@ -0,0 +1,62 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pp
+variant = VO 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 7
+cool_min_speed = 2.5
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 15
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =material_print_temperature + 5
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 18
+speed_equalize_flow_enabled = True
+speed_layer_0 = =math.ceil(speed_print * 15 / 25)
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..87ddc20162
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg
@@ -0,0 +1,64 @@
+[general]
+version = 4
+name = Normal
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_pp
+variant = VO 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 7
+cool_min_speed = 2.5
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 15
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_final_print_temperature = =material_print_temperature - 12
+material_initial_print_temperature = =material_print_temperature - 2
+material_print_temperature = =default_material_print_temperature - 13
+material_print_temperature_layer_0 = =material_print_temperature + 3
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 18
+speed_equalize_flow_enabled = True
+speed_layer_0 = =math.ceil(speed_print * 15 / 25)
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1.1
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..a7b1f7453a
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg
@@ -0,0 +1,64 @@
+[general]
+version = 4
+name = Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_pp
+variant = VO 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 20
+cool_fan_speed_max = 100
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 7
+cool_min_speed = 2.5
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = tetrahedral
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 15
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.85
+machine_nozzle_heat_up_speed = 1.5
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_final_print_temperature = =material_print_temperature - 10
+material_initial_print_temperature = =material_print_temperature - 5
+material_print_temperature = =default_material_print_temperature - 15
+material_print_temperature_layer_0 = =material_print_temperature + 3
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_enable = False
+prime_tower_size = 16
+prime_tower_wipe_enabled = True
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop = 2
+retraction_hop_only_when_collides = True
+retraction_min_travel = 0.8
+retraction_prime_speed = 18
+speed_equalize_flow_enabled = True
+speed_layer_0 = =math.ceil(speed_print * 15 / 25)
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+
+speed_travel_layer_0 = 50
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 1
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = =line_width * 3
diff --git a/resources/quality/liquid/liquid_vo0.4_TPU_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_TPU_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..8bb0f0c1db
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_TPU_Draft_Print.inst.cfg
@@ -0,0 +1,63 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_tpu
+variant = VO 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 8.75
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 4
+gradual_infill_step_height = =5 * layer_height
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = cross_3d
+infill_sparse_density = 10
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 15
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
+material_final_print_temperature = =material_print_temperature
+material_flow = 106
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =material_print_temperature + 15
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_wipe_enabled = True
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop_only_when_collides = True
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = 15
+skin_overlap = 5
+speed_equalize_flow_enabled = True
+speed_layer_0 = =math.ceil(speed_print * 18 / 25)
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 0.7
+travel_avoid_distance = 1.5
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = 0.76
diff --git a/resources/quality/liquid/liquid_vo0.4_TPU_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_TPU_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..5a5341c9ae
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_TPU_Fast_Print.inst.cfg
@@ -0,0 +1,64 @@
+[general]
+version = 4
+name = Normal
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -1
+material = generic_tpu
+variant = VO 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 8.75
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 4
+gradual_infill_step_height = =5 * layer_height
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = cross_3d
+infill_sparse_density = 10
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 15
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
+material_final_print_temperature = =material_print_temperature
+material_flow = 106
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =material_print_temperature + 15
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_wipe_enabled = True
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop_only_when_collides = True
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = 15
+skin_overlap = 5
+speed_equalize_flow_enabled = True
+speed_layer_0 = =math.ceil(speed_print * 18 / 25)
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 0.7
+travel_avoid_distance = 1.5
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = 0.76
+
diff --git a/resources/quality/liquid/liquid_vo0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_TPU_Normal_Quality.inst.cfg
new file mode 100644
index 0000000000..9de28ab3bd
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.4_TPU_Normal_Quality.inst.cfg
@@ -0,0 +1,63 @@
+[general]
+version = 4
+name = Fine
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = normal
+weight = 0
+material = generic_tpu
+variant = VO 0.4
+
+[values]
+acceleration_enabled = True
+acceleration_print = 4000
+brim_width = 8.75
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 4
+gradual_infill_step_height = =5 * layer_height
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_overlap = 0
+infill_pattern = cross_3d
+infill_sparse_density = 10
+infill_wipe_dist = 0.1
+jerk_enabled = True
+jerk_print = 15
+line_width = =machine_nozzle_size * 0.95
+machine_min_cool_heat_time_window = 15
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
+material_final_print_temperature = =material_print_temperature
+material_flow = 106
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 17
+material_standby_temperature = 100
+multiple_mesh_overlap = 0
+prime_tower_wipe_enabled = True
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+retraction_extrusion_window = 1
+retraction_hop_only_when_collides = True
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = 15
+skin_overlap = 5
+speed_equalize_flow_enabled = True
+speed_layer_0 = =math.ceil(speed_print * 18 / 25)
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 35
+top_bottom_thickness = 0.7
+travel_avoid_distance = 1.5
+wall_0_inset = 0
+wall_line_width_x = =line_width
+wall_thickness = 0.76
+
diff --git a/resources/quality/liquid/liquid_vo0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_CFFCPE_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..b1e8e129d8
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.6_CFFCPE_Draft_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_cffcpe
+variant = VO 0.6
+
+[values]
+adhesion_type = skirt
+cool_fan_enabled = True
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 6
+infill_line_width = =line_width
+initial_layer_line_width_factor = 130.0
+line_width = =machine_nozzle_size * (0.58/0.6)
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+skin_overlap = 20
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+wall_line_width_x = =line_width
diff --git a/resources/quality/liquid/liquid_vo0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_CFFPA_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..2ef3ba9fbf
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.6_CFFPA_Draft_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_cffpa
+variant = VO 0.6
+
+[values]
+adhesion_type = skirt
+cool_fan_enabled = True
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 6
+infill_line_width = =line_width
+initial_layer_line_width_factor = 130.0
+line_width = =machine_nozzle_size * (0.58/0.6)
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+skin_overlap = 20
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+wall_line_width_x = =line_width
diff --git a/resources/quality/liquid/liquid_vo0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_GFFCPE_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..1e8490d679
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.6_GFFCPE_Draft_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_gffcpe
+variant = VO 0.6
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 6
+infill_line_width = =line_width
+initial_layer_line_width_factor = 130.0
+line_width = =machine_nozzle_size * (0.58/0.6)
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+skin_overlap = 20
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+wall_line_width_x = =line_width
diff --git a/resources/quality/liquid/liquid_vo0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_GFFPA_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..ecf7afa863
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.6_GFFPA_Draft_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_gffpa
+variant = VO 0.6
+
+[values]
+adhesion_type = brim
+cool_fan_enabled = True
+cool_min_layer_time = 7
+cool_min_layer_time_fan_speed_max = 15
+cool_min_speed = 6
+infill_line_width = =line_width
+initial_layer_line_width_factor = 130.0
+line_width = =machine_nozzle_size * (0.58/0.6)
+material_bed_temperature_layer_0 = =material_bed_temperature + 5
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+skin_overlap = 20
+support_bottom_distance = =support_z_distance / 2
+support_top_distance = =support_z_distance
+support_z_distance = =layer_height * 2
+wall_line_width_x = =line_width
diff --git a/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..e2028dbea0
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -3
+material = generic_petg
+variant = VO 0.6
+is_experimental = True
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+infill_pattern = triangles
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 10
+material_standby_temperature = 100
+prime_tower_enable = True
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_pattern = ='triangles'
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..a47590dbac
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+version = 4
+name = Normal
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -2
+material = generic_petg
+variant = VO 0.6
+is_experimental = True
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+infill_pattern = triangles
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 10
+material_standby_temperature = 100
+prime_tower_enable = True
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_pattern = ='triangles'
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..ad48d1c978
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -3
+material = generic_pla
+variant = VO 0.6
+is_experimental = True
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+infill_pattern = triangles
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 10
+material_standby_temperature = 100
+prime_tower_enable = True
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_pattern = ='triangles'
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..d179a2acab
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+version = 4
+name = Normal
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = fast
+weight = -2
+material = generic_pla
+variant = VO 0.6
+is_experimental = True
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+infill_pattern = triangles
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 10
+material_standby_temperature = 100
+prime_tower_enable = True
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_pattern = ='triangles'
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
diff --git a/resources/quality/liquid/liquid_vo0.8_ABS_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_ABS_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..75b8f8ff62
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_ABS_Draft_Print.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_abs
+variant = VO 0.8
+
+[values]
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 20
+material_standby_temperature = 100
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+retract_at_layer_change = False
diff --git a/resources/quality/liquid/liquid_vo0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_ABS_Superdraft_Print.inst.cfg
new file mode 100644
index 0000000000..f5494f4ce0
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_ABS_Superdraft_Print.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Sprint
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = superdraft
+weight = -4
+material = generic_abs
+variant = VO 0.8
+
+[values]
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 25
+material_standby_temperature = 100
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+retract_at_layer_change = False
diff --git a/resources/quality/liquid/liquid_vo0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_ABS_Verydraft_Print.inst.cfg
new file mode 100644
index 0000000000..96c7c864ba
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_ABS_Verydraft_Print.inst.cfg
@@ -0,0 +1,22 @@
+[general]
+version = 4
+name = Extra Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = verydraft
+weight = -3
+material = generic_abs
+variant = VO 0.8
+
+[values]
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 22
+material_standby_temperature = 100
+speed_print = 50
+speed_topbottom = =math.ceil(speed_print * 30 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+retract_at_layer_change = False
diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..fbd0da1942
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_cpe
+variant = VO 0.8
+
+[values]
+brim_width = 15
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 15
+material_standby_temperature = 100
+prime_tower_enable = True
+retraction_combing_max_distance = 50
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 25 / 40)
+speed_wall = =math.ceil(speed_print * 30 / 40)
+
+jerk_travel = 20
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg
new file mode 100644
index 0000000000..1e89223d7b
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+version = 4
+name = Sprint
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = superdraft
+weight = -4
+material = generic_cpe
+variant = VO 0.8
+
+[values]
+brim_width = 15
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 20
+material_standby_temperature = 100
+prime_tower_enable = True
+retraction_combing_max_distance = 50
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 30 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+
+jerk_travel = 20
\ No newline at end of file
diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg
new file mode 100644
index 0000000000..4061755472
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg
@@ -0,0 +1,25 @@
+[general]
+version = 4
+name = Extra Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = verydraft
+weight = -3
+material = generic_cpe
+variant = VO 0.8
+
+[values]
+brim_width = 15
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature + 17
+material_standby_temperature = 100
+prime_tower_enable = True
+retraction_combing_max_distance = 50
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 25 / 40)
+speed_wall = =math.ceil(speed_print * 30 / 40)
+
+jerk_travel = 20
diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..1f3d01c751
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_nylon
+variant = VO 0.8
+
+[values]
+brim_width = 5.6
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 10
+infill_before_walls = True
+infill_line_width = =line_width
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_standby_temperature = 100
+ooze_shield_angle = 40
+prime_tower_enable = True
+raft_acceleration = =acceleration_layer_0
+raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
+raft_margin = 10
+raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+switch_extruder_prime_speed = 30
+switch_extruder_retraction_amount = 30
+switch_extruder_retraction_speeds = 40
diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg
new file mode 100644
index 0000000000..6d2596e0ad
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Sprint
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = superdraft
+weight = -4
+material = generic_nylon
+variant = VO 0.8
+
+[values]
+brim_width = 5.6
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 10
+infill_before_walls = True
+infill_line_width = =line_width
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_standby_temperature = 100
+ooze_shield_angle = 40
+prime_tower_enable = True
+raft_acceleration = =acceleration_layer_0
+raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
+raft_margin = 10
+raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+switch_extruder_prime_speed = 30
+switch_extruder_retraction_amount = 30
+switch_extruder_retraction_speeds = 40
diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg
new file mode 100644
index 0000000000..77ab637ca9
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg
@@ -0,0 +1,35 @@
+[general]
+version = 4
+name = Extra Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = verydraft
+weight = -3
+material = generic_nylon
+variant = VO 0.8
+
+[values]
+brim_width = 5.6
+cool_min_layer_time_fan_speed_max = 20
+cool_min_speed = 10
+infill_before_walls = True
+infill_line_width = =line_width
+machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+material_standby_temperature = 100
+ooze_shield_angle = 40
+prime_tower_enable = True
+raft_acceleration = =acceleration_layer_0
+raft_airgap = =round(layer_height_0 * 0.85, 2)
+raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
+raft_margin = 10
+raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+switch_extruder_prime_speed = 30
+switch_extruder_retraction_amount = 30
+switch_extruder_retraction_speeds = 40
diff --git a/resources/quality/liquid/liquid_vo0.8_PC_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PC_Fast_Print.inst.cfg
new file mode 100644
index 0000000000..56fa21160c
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PC_Fast_Print.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+version = 4
+name = Fast - Experimental
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pc
+variant = VO 0.8
+is_experimental = True
+
+[values]
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+infill_before_walls = True
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature - 5
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+raft_airgap = 0.5
+raft_margin = 15
+skin_overlap = 0
+speed_layer_0 = =math.ceil(speed_print * 15 / 50)
+speed_print = 50
+speed_slowdown_layers = 15
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
diff --git a/resources/quality/liquid/liquid_vo0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PC_Superdraft_Print.inst.cfg
new file mode 100644
index 0000000000..e93676f336
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PC_Superdraft_Print.inst.cfg
@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Sprint - Experimental
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = superdraft
+weight = -4
+material = generic_pc
+variant = VO 0.8
+is_experimental = True
+
+[values]
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
+infill_before_walls = True
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+raft_airgap = 0.5
+raft_margin = 15
+skin_overlap = 0
+speed_layer_0 = =math.ceil(speed_print * 15 / 50)
+speed_print = 50
+speed_slowdown_layers = 8
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
diff --git a/resources/quality/liquid/liquid_vo0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PC_Verydraft_Print.inst.cfg
new file mode 100644
index 0000000000..563ccb7c4b
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PC_Verydraft_Print.inst.cfg
@@ -0,0 +1,32 @@
+[general]
+version = 4
+name = Extra Fast - Experimental
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = verydraft
+weight = -3
+material = generic_pc
+variant = VO 0.8
+is_experimental = True
+
+[values]
+brim_width = 14
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+infill_before_walls = True
+line_width = =machine_nozzle_size * 0.875
+material_print_temperature = =default_material_print_temperature - 2
+material_print_temperature_layer_0 = =material_print_temperature
+material_standby_temperature = 100
+raft_airgap = 0.5
+raft_margin = 15
+skin_overlap = 0
+speed_layer_0 = =math.ceil(speed_print * 15 / 50)
+speed_print = 50
+speed_slowdown_layers = 10
+speed_topbottom = =math.ceil(speed_print * 25 / 50)
+speed_wall = =math.ceil(speed_print * 40 / 50)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
+support_line_width = =round(line_width * 0.6 / 0.7, 2)
diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..bcd41791a7
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_petg
+variant = VO 0.8
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
+
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+infill_sparse_density = 15
+layer_height_0 = 0.4
diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg
new file mode 100644
index 0000000000..c586542618
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+version = 4
+name = Sprint
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = superdraft
+weight = -4
+material = generic_petg
+variant = VO 0.8
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 15
+prime_tower_enable = True
+raft_margin = 10
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+infill_sparse_density = 15
+layer_height_0 = 0.4
diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg
new file mode 100644
index 0000000000..ec1719c11c
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+version = 4
+name = Extra Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = verydraft
+weight = -3
+material = generic_petg
+variant = VO 0.8
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+infill_sparse_density = 15
+layer_height_0 = 0.4
diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..f6cc9ced8e
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pla
+variant = VO 0.8
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
+
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+infill_sparse_density = 15
+layer_height_0 = 0.4
diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg
new file mode 100644
index 0000000000..e6ebc15606
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg
@@ -0,0 +1,42 @@
+[general]
+version = 4
+name = Sprint
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = superdraft
+weight = -4
+material = generic_pla
+variant = VO 0.8
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 15
+prime_tower_enable = True
+raft_margin = 10
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+infill_sparse_density = 15
+layer_height_0 = 0.4
diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg
new file mode 100644
index 0000000000..16be1997f7
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg
@@ -0,0 +1,41 @@
+[general]
+version = 4
+name = Extra Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = verydraft
+weight = -3
+material = generic_pla
+variant = VO 0.8
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 10
+prime_tower_enable = True
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+infill_sparse_density = 15
+layer_height_0 = 0.4
diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..30a517d937
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg
@@ -0,0 +1,52 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pp
+variant = VO 0.8
+
+[values]
+brim_width = 25
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 17
+top_skin_expand_distance = =line_width * 2
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 25)
+jerk_support = =math.ceil(jerk_print * 25 / 25)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 25)
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = =default_material_print_temperature - 2
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_min_volume = 10
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_min_travel = 1.5
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.6
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
+wall_thickness = 1.6
diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg
new file mode 100644
index 0000000000..3f1b1172b8
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg
@@ -0,0 +1,52 @@
+[general]
+version = 4
+name = Sprint
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = superdraft
+weight = -4
+material = generic_pp
+variant = VO 0.8
+
+[values]
+brim_width = 25
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 17
+top_skin_expand_distance = =line_width * 2
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 15)
+jerk_support = =math.ceil(jerk_print * 25 / 15)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 15)
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_min_volume = 20
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_min_travel = 1.5
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.6
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
+wall_thickness = 1.6
diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg
new file mode 100644
index 0000000000..a5a949b72b
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg
@@ -0,0 +1,51 @@
+[general]
+version = 4
+name = Extra Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = verydraft
+weight = -3
+material = generic_pp
+variant = VO 0.8
+
+[values]
+brim_width = 25
+cool_min_layer_time_fan_speed_max = 6
+cool_min_speed = 17
+top_skin_expand_distance = =line_width * 2
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = tetrahedral
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 15)
+jerk_support = =math.ceil(jerk_print * 25 / 15)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 15)
+material_bed_temperature_layer_0 = =material_bed_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+prime_tower_min_volume = 15
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 0.5
+retraction_min_travel = 1.5
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.6
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.8 / 0.8, 2)
+wall_thickness = 1.6
diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..5b4cd8a8a0
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg
@@ -0,0 +1,62 @@
+[general]
+version = 4
+name = Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = draft
+weight = -2
+material = generic_tpu
+variant = VO 0.8
+
+[values]
+brim_width = 8.75
+cool_min_layer_time_fan_speed_max = 6
+top_skin_expand_distance = =line_width * 2
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = cross_3d
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 15)
+jerk_support = =math.ceil(jerk_print * 25 / 15)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 15)
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
+material_final_print_temperature = =material_print_temperature
+material_flow = 105
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature = =default_material_print_temperature - 2
+material_print_temperature_layer_0 = =material_print_temperature + 19
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 1.5
+retraction_hop_only_when_collides = False
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+speed_print = 30
+speed_topbottom = =math.ceil(speed_print * 25 / 30)
+
+speed_wall = =math.ceil(speed_print * 30 / 30)
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_angle = 50
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.2
+travel_avoid_distance = 1.5
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
+wall_thickness = 1.3
+
+jerk_travel = 20
diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg
new file mode 100644
index 0000000000..a146b9d3e1
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg
@@ -0,0 +1,63 @@
+[general]
+version = 4
+name = Sprint
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = superdraft
+weight = -4
+material = generic_tpu
+variant = VO 0.8
+
+[values]
+brim_width = 8.75
+cool_min_layer_time_fan_speed_max = 6
+top_skin_expand_distance = =line_width * 2
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = cross_3d
+infill_sparse_density = 10
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 15)
+jerk_support = =math.ceil(jerk_print * 25 / 15)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 15)
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
+material_final_print_temperature = =material_print_temperature
+material_flow = 105
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =material_print_temperature + 15
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 1.5
+retraction_hop_only_when_collides = False
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+speed_print = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 30)
+
+speed_wall = =math.ceil(speed_print * 30 / 30)
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_angle = 50
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.2
+travel_avoid_distance = 1.5
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
+wall_thickness = 1.3
+
+jerk_travel = 20
diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg
new file mode 100644
index 0000000000..74ce79eb58
--- /dev/null
+++ b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg
@@ -0,0 +1,62 @@
+[general]
+version = 4
+name = Extra Fast
+definition = liquid
+
+[metadata]
+setting_version = 16
+type = quality
+quality_type = verydraft
+weight = -3
+material = generic_tpu
+variant = VO 0.8
+
+[values]
+brim_width = 8.75
+cool_min_layer_time_fan_speed_max = 6
+top_skin_expand_distance = =line_width * 2
+infill_before_walls = True
+infill_line_width = =round(line_width * 0.7 / 0.8, 2)
+infill_pattern = cross_3d
+infill_sparse_density = 10
+jerk_prime_tower = =math.ceil(jerk_print * 25 / 15)
+jerk_support = =math.ceil(jerk_print * 25 / 15)
+jerk_wall_0 = =math.ceil(jerk_wall * 15 / 15)
+machine_nozzle_cool_down_speed = 0.5
+machine_nozzle_heat_up_speed = 2.5
+material_final_print_temperature = =material_print_temperature
+material_flow = 105
+material_initial_print_temperature = =material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 17
+material_standby_temperature = 100
+multiple_mesh_overlap = 0.2
+prime_tower_enable = True
+prime_tower_flow = 100
+retract_at_layer_change = False
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.5
+retraction_hop = 1.5
+retraction_hop_only_when_collides = False
+retraction_min_travel = =line_width * 2
+retraction_prime_speed = 15
+skin_line_width = =round(line_width * 0.78 / 0.8, 2)
+speed_print = 30
+speed_topbottom = =math.ceil(speed_print * 23 / 30)
+
+speed_wall = =math.ceil(speed_print * 30 / 30)
+speed_wall_x = =math.ceil(speed_wall * 30 / 30)
+support_angle = 50
+support_bottom_distance = =support_z_distance
+support_line_width = =round(line_width * 0.7 / 0.8, 2)
+support_offset = =line_width
+switch_extruder_prime_speed = 15
+switch_extruder_retraction_amount = 20
+switch_extruder_retraction_speeds = 45
+top_bottom_thickness = 1.2
+travel_avoid_distance = 1.5
+travel_compensate_overlapping_walls_0_enabled = False
+wall_0_wipe_dist = =line_width * 2
+wall_line_width_x = =round(line_width * 0.6 / 0.8, 2)
+wall_thickness = 1.3
+
+jerk_travel = 20