diff options
author | AnnaKang0219 <heed818@yahoo.com.tw> | 2022-03-29 05:56:31 +0300 |
---|---|---|
committer | AnnaKang0219 <heed818@yahoo.com.tw> | 2022-03-29 05:56:31 +0300 |
commit | 98293146a192cb0bba8d38d35bf0aeeaf43c4595 (patch) | |
tree | 19f9e437ebb2d98834ec829cffc5f00a232a0f96 /resources/quality | |
parent | 5645eacc644bb2ec148858d92e05feeb26ef2161 (diff) |
Adding printer da Vinci Pro EVO
Adding printer da Vinci Pro EVO
Diffstat (limited to 'resources/quality')
60 files changed, 1908 insertions, 0 deletions
diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_coarse.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_coarse.inst.cfg new file mode 100644 index 0000000000..e55703d51b --- /dev/null +++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_coarse.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_abs +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +support_infill_rate = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_draft.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_draft.inst.cfg new file mode 100644 index 0000000000..11cc5989cd --- /dev/null +++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_draft.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_abs +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +support_infill_rate = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_fine.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_fine.inst.cfg new file mode 100644 index 0000000000..79c520853b --- /dev/null +++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_fine.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_abs +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +support_infill_rate = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_normal.inst.cfg b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_normal.inst.cfg new file mode 100644 index 0000000000..718e9a18b5 --- /dev/null +++ b/resources/quality/xyzprinting/abs/xyzprinting_da_vinci_pro_evo_hs_0.40_abs_normal.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_abs +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +support_infill_rate = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_coarse.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_coarse.inst.cfg new file mode 100644 index 0000000000..b9ab528973 --- /dev/null +++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_coarse.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_antibact_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_draft.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_draft.inst.cfg new file mode 100644 index 0000000000..9ff2b8d07c --- /dev/null +++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_draft.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_antibact_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_fine.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_fine.inst.cfg new file mode 100644 index 0000000000..eaf1970cd6 --- /dev/null +++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_fine.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_antibact_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_normal.inst.cfg b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_normal.inst.cfg new file mode 100644 index 0000000000..ddd907d233 --- /dev/null +++ b/resources/quality/xyzprinting/anti_bact/xyzprinting_da_vinci_pro_evo_hs_0.40_antibact_normal.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_antibact_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_coarse.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_coarse.inst.cfg new file mode 100644 index 0000000000..1fa0e0a933 --- /dev/null +++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_coarse.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_carbon_fiber +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 6.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_draft.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_draft.inst.cfg new file mode 100644 index 0000000000..a336d046dd --- /dev/null +++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_draft.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_carbon_fiber +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 6.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_fine.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_fine.inst.cfg new file mode 100644 index 0000000000..f17479e1d0 --- /dev/null +++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_fine.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_carbon_fiber +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 6.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_normal.inst.cfg b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_normal.inst.cfg new file mode 100644 index 0000000000..488ffcf798 --- /dev/null +++ b/resources/quality/xyzprinting/carbon_fiber/xyzprinting_da_vinci_pro_evo_hs_0.40_carbon_fiber_normal.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_carbon_fiber +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 6.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_coarse.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_coarse.inst.cfg new file mode 100644 index 0000000000..6df03ef0c1 --- /dev/null +++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_coarse.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_metallic_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_draft.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_draft.inst.cfg new file mode 100644 index 0000000000..a42adc1a68 --- /dev/null +++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_draft.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_metallic_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_fine.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_fine.inst.cfg new file mode 100644 index 0000000000..5b136fd50f --- /dev/null +++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_fine.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_metallic_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_normal.inst.cfg b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_normal.inst.cfg new file mode 100644 index 0000000000..13f1509e31 --- /dev/null +++ b/resources/quality/xyzprinting/metallic_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_metallic_normal.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_metallic_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_coarse.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_coarse.inst.cfg new file mode 100644 index 0000000000..c78ab1948f --- /dev/null +++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_coarse.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_nylon +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 100 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature = 260 +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_draft.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_draft.inst.cfg new file mode 100644 index 0000000000..5feeea0845 --- /dev/null +++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_draft.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_nylon +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 100 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature = 260 +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_fine.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_fine.inst.cfg new file mode 100644 index 0000000000..8c77e43851 --- /dev/null +++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_fine.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_nylon +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature = 100 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature = 260 +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_normal.inst.cfg b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_normal.inst.cfg new file mode 100644 index 0000000000..35acdba388 --- /dev/null +++ b/resources/quality/xyzprinting/nylon/xyzprinting_da_vinci_pro_evo_hs_0.40_nylon_normal.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_nylon +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature = 100 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature = 260 +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_coarse.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_coarse.inst.cfg new file mode 100644 index 0000000000..d94c2f748a --- /dev/null +++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_coarse.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_pahtcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 90 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_infill = 40 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_draft.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_draft.inst.cfg new file mode 100644 index 0000000000..d756c80f73 --- /dev/null +++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_draft.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_pahtcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 90 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_infill = 40 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_fine.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_fine.inst.cfg new file mode 100644 index 0000000000..ccdcd9d8f3 --- /dev/null +++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_fine.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_pahtcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 90 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_infill = 40 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_normal.inst.cfg b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_normal.inst.cfg new file mode 100644 index 0000000000..892315e7b2 --- /dev/null +++ b/resources/quality/xyzprinting/pahtcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_pahtcf15_normal.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_pahtcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 90 +layer_height = 0.2 +layer_height_0 = 0.3 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_infill = 40 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg new file mode 100644 index 0000000000..f1f875d796 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_coarse.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg new file mode 100644 index 0000000000..7144bee2ac --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_draft.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg new file mode 100644 index 0000000000..715225fcb7 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_fine.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg new file mode 100644 index 0000000000..4b244b0f66 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hs_0.40_pc_normal.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_pc +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg new file mode 100644 index 0000000000..d78cec3433 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_coarse.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg new file mode 100644 index 0000000000..a766ec5995 --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_draft.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg new file mode 100644 index 0000000000..321bee9acf --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_fine.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg new file mode 100644 index 0000000000..e12cdbe8ae --- /dev/null +++ b/resources/quality/xyzprinting/pc/xyzprinting_da_vinci_pro_evo_hsht_0.60_pc_normal.inst.cfg @@ -0,0 +1,31 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_pc +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 40 +speed_wall = =speed_print +speed_infill = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 3.0 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_coarse.inst.cfg b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_coarse.inst.cfg new file mode 100644 index 0000000000..a967c9956b --- /dev/null +++ b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_coarse.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_petcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 50 +speed_layer_0 = 15 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_draft.inst.cfg b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_draft.inst.cfg new file mode 100644 index 0000000000..78e5500de5 --- /dev/null +++ b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_draft.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_petcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 50 +speed_layer_0 = 15 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_fine.inst.cfg b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_fine.inst.cfg new file mode 100644 index 0000000000..703d37f33b --- /dev/null +++ b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_fine.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_petcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 50 +speed_layer_0 = 15 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_normal.inst.cfg b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_normal.inst.cfg new file mode 100644 index 0000000000..f44b43de5e --- /dev/null +++ b/resources/quality/xyzprinting/petcf15/xyzprinting_da_vinci_pro_evo_hsht_0.60_petcf15_normal.inst.cfg @@ -0,0 +1,36 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_petcf15 +variant = Hardened Steel High Temp. 0.6mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.2 +layer_height_0 = 0.3 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 150 +retraction_amount = 7 +retraction_speed = 50 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 50 +speed_layer_0 = 15 +acceleration_infill = 500.0 +acceleration_wall = 500.0 +acceleration_wall_0 = 500.0
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_coarse.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_coarse.inst.cfg new file mode 100644 index 0000000000..386e7f6f37 --- /dev/null +++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_coarse.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_petg +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg new file mode 100644 index 0000000000..500da52491 --- /dev/null +++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_draft.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_petg +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_fine.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_fine.inst.cfg new file mode 100644 index 0000000000..cdd394463b --- /dev/null +++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_fine.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_petg +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_normal.inst.cfg b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_normal.inst.cfg new file mode 100644 index 0000000000..590715cbfd --- /dev/null +++ b/resources/quality/xyzprinting/petg/xyzprinting_da_vinci_pro_evo_hs_0.40_petg_normal.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_petg +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 70 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 3 +retraction_speed = 20 +retraction_prime_speed = =retraction_speed +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_coarse.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_coarse.inst.cfg new file mode 100644 index 0000000000..b7f2d85c95 --- /dev/null +++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_coarse.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_draft.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_draft.inst.cfg new file mode 100644 index 0000000000..da19696958 --- /dev/null +++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_draft.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_fine.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_fine.inst.cfg new file mode 100644 index 0000000000..cde51bc7f4 --- /dev/null +++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_fine.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_normal.inst.cfg b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_normal.inst.cfg new file mode 100644 index 0000000000..668a874ad8 --- /dev/null +++ b/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_pro_evo_hs_0.40_pla_normal.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 60 +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_coarse.inst.cfg b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_coarse.inst.cfg new file mode 100644 index 0000000000..51f87cfed8 --- /dev/null +++ b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_coarse.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_ppgf30 +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 90 +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_draft.inst.cfg b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_draft.inst.cfg new file mode 100644 index 0000000000..cef5bb7222 --- /dev/null +++ b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_draft.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_ppgf30 +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 90 +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_fine.inst.cfg b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_fine.inst.cfg new file mode 100644 index 0000000000..4c176e416e --- /dev/null +++ b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_fine.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_ppgf30 +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 90 +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_normal.inst.cfg b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_normal.inst.cfg new file mode 100644 index 0000000000..440704d541 --- /dev/null +++ b/resources/quality/xyzprinting/ppgf30/xyzprinting_da_vinci_pro_evo_hs_0.40_ppgf30_normal.inst.cfg @@ -0,0 +1,32 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_ppgf30 +variant = Hardened Steel 0.4mm Nozzle + +[values] +material_bed_temperature = 90 +layer_height = 0.2 +layer_height_0 = 0.3 +material_diameter = 1.75 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 20 +speed_infill = 30 +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 50
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_coarse.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_coarse.inst.cfg new file mode 100644 index 0000000000..6a177ec483 --- /dev/null +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_coarse.inst.cfg @@ -0,0 +1,34 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_tough_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_topbottom = 10 +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_draft.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_draft.inst.cfg new file mode 100644 index 0000000000..295f1356ba --- /dev/null +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_draft.inst.cfg @@ -0,0 +1,34 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_tough_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_topbottom = 10 +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_fine.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_fine.inst.cfg new file mode 100644 index 0000000000..42d9b9556f --- /dev/null +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_fine.inst.cfg @@ -0,0 +1,34 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_tough_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_topbottom = 10 +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_normal.inst.cfg b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_normal.inst.cfg new file mode 100644 index 0000000000..d900018585 --- /dev/null +++ b/resources/quality/xyzprinting/tough_pla/xyzprinting_da_vinci_pro_evo_hs_0.40_tough_pla_normal.inst.cfg @@ -0,0 +1,34 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_tough_pla +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.30 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 30 +speed_infill = 60 +speed_wall = =speed_print +speed_topbottom = 10 +speed_support = =speed_print +speed_travel = 120 +retraction_amount = 4.5 +retraction_speed = 20 +retraction_prime_speed = 15 +infill_sparse_density = 10 +bridge_skin_speed = 20 +adhesion_type = skirt
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_coarse.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_coarse.inst.cfg new file mode 100644 index 0000000000..e9caadf8de --- /dev/null +++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_coarse.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +material = xyzprinting_tpu +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 15 +speed_infill = =speed_print +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = =15 +infill_sparse_density = 10 +brim_width = 5.0 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_draft.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_draft.inst.cfg new file mode 100644 index 0000000000..1bc5b5df89 --- /dev/null +++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_draft.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +material = xyzprinting_tpu +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 15 +speed_infill = =speed_print +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = =15 +infill_sparse_density = 10 +brim_width = 5.0 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_fine.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_fine.inst.cfg new file mode 100644 index 0000000000..7c395132e8 --- /dev/null +++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_fine.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +material = xyzprinting_tpu +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 15 +speed_infill = =speed_print +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = =15 +infill_sparse_density = 10 +brim_width = 5.0 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_normal.inst.cfg b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_normal.inst.cfg new file mode 100644 index 0000000000..167c70c4ac --- /dev/null +++ b/resources/quality/xyzprinting/tpu/xyzprinting_da_vinci_pro_evo_hs_0.40_tpu_normal.inst.cfg @@ -0,0 +1,33 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +material = xyzprinting_tpu +variant = Hardened Steel 0.4mm Nozzle + +[values] +layer_height = 0.2 +layer_height_0 = 0.3 +material_diameter = 1.75 +material_bed_temperature = 60 +material_bed_temperature_layer_0 = =material_bed_temperature +material_print_temperature_layer_0 = =material_print_temperature +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature +speed_print = 15 +speed_infill = =speed_print +speed_wall = =speed_print +speed_support = =speed_print +speed_travel = 200 +retraction_amount = 6 +retraction_speed = 50 +retraction_prime_speed = =15 +infill_sparse_density = 10 +brim_width = 5.0 +bridge_skin_speed = 100
\ No newline at end of file diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.10_fine.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.10_fine.inst.cfg new file mode 100644 index 0000000000..0012b1fa8a --- /dev/null +++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.10_fine.inst.cfg @@ -0,0 +1,17 @@ +[general] +version = 4 +name = Fine Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = fine +weight = 0 +global_quality = True + +[values] +layer_height = 0.1 +layer_height_0 = 0.2 +material_diameter = 1.75 +infill_sparse_density = 10
\ No newline at end of file diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.20_normal.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.20_normal.inst.cfg new file mode 100644 index 0000000000..35abe97de0 --- /dev/null +++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.20_normal.inst.cfg @@ -0,0 +1,17 @@ +[general] +version = 4 +name = Normal Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = normal +weight = -1 +global_quality = True + +[values] +layer_height = 0.2 +layer_height_0 = 0.3 +material_diameter = 1.75 +infill_sparse_density = 10
\ No newline at end of file diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.30_draft.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.30_draft.inst.cfg new file mode 100644 index 0000000000..6af1354a7a --- /dev/null +++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.30_draft.inst.cfg @@ -0,0 +1,17 @@ +[general] +version = 4 +name = Draft Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = draft +weight = -2 +global_quality = True + +[values] +layer_height = 0.3 +layer_height_0 = 0.4 +material_diameter = 1.75 +infill_sparse_density = 10
\ No newline at end of file diff --git a/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.40_coarse.inst.cfg b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.40_coarse.inst.cfg new file mode 100644 index 0000000000..c1cb4bbca3 --- /dev/null +++ b/resources/quality/xyzprinting/xyzprinting_da_vinci_pro_evo_global_0.40_coarse.inst.cfg @@ -0,0 +1,17 @@ +[general] +version = 4 +name = Coarse Quality +definition = xyzprinting_da_vinci_pro_evo + +[metadata] +setting_version = 19 +type = quality +quality_type = coarse +weight = -3 +global_quality = True + +[values] +layer_height = 0.4 +layer_height_0 = 0.4 +material_diameter = 1.75 +infill_sparse_density = 10
\ No newline at end of file |