Cleaned up of the support settings for the UM3 quality modes.

Relates to PP-108

23 files changed, 0 insertions, 43 deletions

diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
index 53bb10c2eb..e4af6a3846 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg
@@ -40,9 +40,7 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50)
 speed_travel = 250
 speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
-support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
index 544dd606cc..3677d0f830 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg
@@ -27,13 +27,7 @@ speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
 top_bottom_thickness = 1
 support_brim_enable = True
-support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
index 03888d299d..9824109303 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg
@@ -26,13 +26,7 @@ speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 top_bottom_thickness = 1
 support_brim_enable = True
-support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
index 38f4253ab8..0363362b5f 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg
@@ -23,14 +23,8 @@ prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
 skin_overlap = 10
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
 support_brim_enable = True
-support_interface_enable = True
 support_interface_density = =min(extruderValues('material_surface_energy'))
-support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
 support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height
 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
 support_angle = 45
-support_join_distance = 5
-support_offset = 2
-support_pattern = triangles
-support_infill_rate = =10 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 10
 top_bottom_thickness = 1
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
index 0c1224aa2b..fd195c841d 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
@@ -51,7 +51,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
index 1bce358b5d..cada630bb9 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
@@ -49,7 +49,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
index b997f3acff..1e7f439fac 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
@@ -51,7 +51,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
index d6181b9207..2e7057947e 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -48,7 +48,6 @@ speed_wall = =math.ceil(speed_print * 40 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 40)
 support_bottom_distance = =support_z_distance
 support_interface_density = 87.5
-support_interface_pattern = lines
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 35
diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
index d4f447b5e3..b90e50c955 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -26,7 +26,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
index 47fae5de3f..cd6fa26ba8 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -27,7 +27,6 @@ raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2)
 raft_margin = 10
 raft_surface_thickness = =round(machine_nozzle_size * 0.2 / 0.4, 2)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg
index d8dd16b398..7e0fdd459a 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg
@@ -31,6 +31,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg
index c2236f4e28..228358c8a0 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg
@@ -34,6 +34,4 @@ speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 speed_infill = =math.ceil(speed_print * 35 / 45)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
index dbf45cd04f..df8a7a4d29 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg
@@ -32,6 +32,4 @@ speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_x = =speed_wall
 speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
index 6510c0db81..0ae86ae243 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
@@ -34,7 +34,6 @@ retraction_prime_speed = 15
 speed_travel = 300
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
index d37c9aef29..8112cd6fb0 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -35,7 +35,6 @@ speed_travel = 300
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 speed_infill = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
index 2313d3e7f2..76ad9235ba 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -34,7 +34,6 @@ retraction_prime_speed = 15
 speed_travel = 300
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg
index 91cd4ac90c..569a214004 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg
@@ -27,5 +27,4 @@ prime_tower_enable = False
 retract_at_layer_change = False
 speed_print = 45
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 6
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg
index 24838340d2..85442a1a0e 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg
@@ -32,5 +32,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 30)
 speed_wall = =math.ceil(speed_print * 25/ 30)
 speed_wall_0 = =math.ceil(speed_print * 20 / 30)
 support_angle = 70
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
index 2a650e69bd..ffc82adfb2 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg
@@ -32,6 +32,4 @@ speed_topbottom = =math.ceil(speed_print * 20 / 35)
 speed_wall = =math.ceil(speed_print * 25/ 35)
 speed_wall_0 = =math.ceil(speed_print * 20 / 35)
 support_angle = 70
-support_pattern = ='triangles'
-support_xy_distance = =wall_line_width_0 * 1.5
 top_bottom_thickness = =layer_height * 4
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
index e68fde0763..b1c73cd9cb 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -43,7 +43,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
index c0c9e7c48a..2585eb3ebf 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -45,7 +45,6 @@ speed_wall_x = =speed_print
 speed_infill = =speed_print
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
index e85db940a5..c020e5a80a 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -43,7 +43,6 @@ speed_wall = =math.ceil(speed_print * 30 / 30)
 speed_wall_x = =math.ceil(speed_wall * 30 / 30)
 support_angle = 50
 support_bottom_distance = =support_z_distance
-support_offset = =line_width
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 20
 switch_extruder_retraction_speeds = 45
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
index 3e2c92bbf6..7682054c76 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -18,4 +18,3 @@ material_standby_temperature = 100
 retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
-support_interface_height = 1.2