Update stock quickprint profiles for TAZ6

10 files changed, 340 insertions, 504 deletions

diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-quality_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-quality_nutmeg_single-extruder_0.5noz_cura.ini
index bda735cf55..9bc7ed36c7 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-quality_mangrove_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-quality_nutmeg_single-extruder_0.5noz_cura.ini
@@ -7,7 +7,7 @@ fill_density = 20
 perimeter_before_infill = True
 nozzle_size = 0.5
 print_speed = 50
-print_temperature = 250
+print_temperature = 240
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
@@ -47,9 +47,9 @@ fan_enabled = True
 skirt_line_count = 1
 skirt_gap = 3.0
 skirt_minimal_length = 250
-fan_full_height = 0.5
-fan_speed = 40
-fan_speed_max = 60
+fan_full_height = 6
+fan_speed = 20
+fan_speed_max = 40
 cool_min_feedrate = 10
 cool_head_lift = False
 solid_top = True
@@ -88,20 +88,30 @@ simplemodematerial = 1_pla
 simplemodematerialtype = Beginner
 
 [alterations]
-start.gcode = G21
+start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer
+	;Basic slice data:
+	;Sliced at: {day} {date} {time}
+	;Layer height: {layer_height}
+	;Walls: {wall_thickness}
+	;Fill: {fill_density}
+	;Estimated Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+    G26                          ; clear potential 'probe fail' condition
+	G21                          ; set units to Millimetres
 	M107                         ; disable fans
-	G21                          ; metric values
 	G90                          ; absolute positioning
 	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
 	G92 E0                       ; set extruder position to 0
 	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S150                    ; set to cleaning temp and wait
+    G28 XY                       ; home X and Y
+    G1 X-19 Y258 F1000           ; move to safe homing position
+    M109 S170                    ; soften filament for z homing
+    G28 Z                        ; home Z
+    M104 S170                    ; cool to probing temp during wipe
 	G1 E-30 F100                 ; suck up XXmm of filament
-	M109 S170                    ; heat to probe temp
 	G1 X-15 Y100 F3000           ; move above wiper pad
-	G1 Z2                        ; Push nozzle into wiper
+	G1 Z1                        ; push nozzle into wiper
 	G1 X-17 Y95 F1000            ; slow wipe
 	G1 X-17 Y90 F1000            ; slow wipe
 	G1 X-17 Y85 F1000            ; slow wipe
@@ -126,31 +136,36 @@ start.gcode = G21
 	G1 X-15 Y25 Z1.5 F1000       ; slow wipe
 	G1 X-17 Y23 F1000            ; slow wipe
 	G1 Z10                       ; raise extruder
-	G1 Y10                       ; move above probe
-	M109 S170                    ; set to probing temp
+	M109 S170                    ; heat to probe temp
+	G1 X-11 Y-8                  ; move above probe
 	M204 S100                    ; set accel for probing
-	G29                          ; Probe
-	M204 S700                    ; set accel back to normal
+	G29                          ; probe sequence (for auto-leveling)
+	M204 S500                    ; set accel back to normal
 	G1 X0 Y0 Z15 F5000           ; get out the way
 	M400                         ; clear buffer
 	G4 S1                        ; pause
+	M117 Heating...              ; LCD status message
+	M140 S{print_bed_temperature}; get bed heating up
 	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
+	M190 S{print_bed_temperature}; get bed temping up during first layer
 	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-	M117 Taz Printing...         ; Message
-end.gcode = M400
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
 	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
 	M107                           ; fans off
 	G91                            ; relative positioning
 	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
 	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
 	M84                            ; steppers off
 	G90                            ; absolute positioning
-	M117 TAZ 6 Ready.              ;{profile_string}
+	M117 Print complete            ; progress indicator message
+	;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
 	;Print time: {print_time}
diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-speed_nutmeg_single-extruder_0.5noz_cura.ini
index 64e3caca42..586c991a3a 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-speed_nutmeg_single-extruder_0.5noz_cura.ini
@@ -2,12 +2,12 @@
 layer_height = 0.38
 wall_thickness = 1.0
 retraction_enable = True
-solid_layer_thickness = 1.04
-fill_density = 20
+solid_layer_thickness = 1
+fill_density = 40
 perimeter_before_infill = True
 nozzle_size = 0.5
 print_speed = 50
-print_temperature = 250
+print_temperature = 240
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
@@ -47,9 +47,9 @@ fan_enabled = True
 skirt_line_count = 1
 skirt_gap = 3.0
 skirt_minimal_length = 250
-fan_full_height = 0.5
-fan_speed = 40
-fan_speed_max = 60
+fan_full_height = 6
+fan_speed = 3
+fan_speed_max = 50
 cool_min_feedrate = 10
 cool_head_lift = False
 solid_top = True
@@ -88,20 +88,30 @@ simplemodematerial = 1_pla
 simplemodematerialtype = Beginner
 
 [alterations]
-start.gcode = G21
+start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer
+	;Basic slice data:
+	;Sliced at: {day} {date} {time}
+	;Layer height: {layer_height}
+	;Walls: {wall_thickness}
+	;Fill: {fill_density}
+	;Estimated Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+    G26                          ; clear potential 'probe fail' condition
+	G21                          ; set units to Millimetres
 	M107                         ; disable fans
-	G21                          ; metric values
 	G90                          ; absolute positioning
 	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
 	G92 E0                       ; set extruder position to 0
 	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S150                    ; set to cleaning temp and wait
+    G28 XY                       ; home X and Y
+    G1 X-19 Y258 F1000           ; move to safe homing position
+    M109 S170                    ; soften filament for z homing
+    G28 Z                        ; home Z
+    M104 S170                    ; cool to probing temp during wipe
 	G1 E-30 F100                 ; suck up XXmm of filament
-	M109 S170                    ; heat to probe temp
 	G1 X-15 Y100 F3000           ; move above wiper pad
-	G1 Z2                        ; Push nozzle into wiper
+	G1 Z1                        ; push nozzle into wiper
 	G1 X-17 Y95 F1000            ; slow wipe
 	G1 X-17 Y90 F1000            ; slow wipe
 	G1 X-17 Y85 F1000            ; slow wipe
@@ -126,31 +136,35 @@ start.gcode = G21
 	G1 X-15 Y25 Z1.5 F1000       ; slow wipe
 	G1 X-17 Y23 F1000            ; slow wipe
 	G1 Z10                       ; raise extruder
-	G1 Y10                       ; move above probe
-	M109 S170                    ; set to probing temp
+	M109 S170                    ; heat to probe temp
+	G1 X-11 Y-8                  ; move above probe
 	M204 S100                    ; set accel for probing
-	G29                          ; Probe
-	M204 S700                    ; set accel back to normal
+	G29                          ; probe sequence (for auto-leveling)
+	M204 S500                    ; set accel back to normal
 	G1 X0 Y0 Z15 F5000           ; get out the way
 	M400                         ; clear buffer
 	G4 S1                        ; pause
+	M117 Heating...              ; LCD status message
+	M140 S{print_bed_temperature}; get bed heating up
 	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
+	M190 S{print_bed_temperature}; get bed temping up during first layer
 	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-	M117 Taz Printing...         ; Message
-end.gcode = M400
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
 	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
 	M107                           ; fans off
 	G91                            ; relative positioning
 	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
 	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
 	M84                            ; steppers off
 	G90                            ; absolute positioning
-	M117 TAZ 6 Ready.
+	M117 Print complete            ; progress indicator message
 	;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_medium-quality_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_medium-quality_nutmeg_single-extruder_0.5noz_cura.ini
index 9f29064906..2a85f91fbe 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_medium-quality_mangrove_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_medium-quality_nutmeg_single-extruder_0.5noz_cura.ini
@@ -47,7 +47,7 @@ fan_enabled = True
 skirt_line_count = 1
 skirt_gap = 3.0
 skirt_minimal_length = 250
-fan_full_height = 0.5
+fan_full_height = 6
 fan_speed = 40
 fan_speed_max = 60
 cool_min_feedrate = 10
@@ -88,20 +88,30 @@ simplemodematerial = 1_pla
 simplemodematerialtype = Beginner
 
 [alterations]
-start.gcode = G21
+start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer
+	;Basic slice data:
+	;Sliced at: {day} {date} {time}
+	;Layer height: {layer_height}
+	;Walls: {wall_thickness}
+	;Fill: {fill_density}
+	;Estimated Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+    G26                          ; clear potential 'probe fail' condition
+	G21                          ; set units to Millimetres
 	M107                         ; disable fans
-	G21                          ; metric values
 	G90                          ; absolute positioning
 	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
 	G92 E0                       ; set extruder position to 0
 	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S150                    ; set to cleaning temp and wait
+    G28 XY                       ; home X and Y
+    G1 X-19 Y258 F1000           ; move to safe homing position
+    M109 S170                    ; soften filament for z homing
+    G28 Z                        ; home Z
+    M104 S170                    ; cool to probing temp during wipe
 	G1 E-30 F100                 ; suck up XXmm of filament
-	M109 S170                    ; heat to probe temp
 	G1 X-15 Y100 F3000           ; move above wiper pad
-	G1 Z2                        ; Push nozzle into wiper
+	G1 Z1                        ; push nozzle into wiper
 	G1 X-17 Y95 F1000            ; slow wipe
 	G1 X-17 Y90 F1000            ; slow wipe
 	G1 X-17 Y85 F1000            ; slow wipe
@@ -126,31 +136,36 @@ start.gcode = G21
 	G1 X-15 Y25 Z1.5 F1000       ; slow wipe
 	G1 X-17 Y23 F1000            ; slow wipe
 	G1 Z10                       ; raise extruder
-	G1 Y10                       ; move above probe
-	M109 S170                    ; set to probing temp
+	M109 S170                    ; heat to probe temp
+	G1 X-11 Y-8                  ; move above probe
 	M204 S100                    ; set accel for probing
-	G29                          ; Probe
-	M204 S700                    ; set accel back to normal
+	G29                          ; probe sequence (for auto-leveling)
+	M204 S500                    ; set accel back to normal
 	G1 X0 Y0 Z15 F5000           ; get out the way
 	M400                         ; clear buffer
 	G4 S1                        ; pause
+	M117 Heating...              ; LCD status message
+	M140 S{print_bed_temperature}; get bed heating up
 	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
+	M190 S{print_bed_temperature}; get bed temping up during first layer
 	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-	M117 Taz Printing...         ; Message
-end.gcode = M400
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
 	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
 	M107                           ; fans off
 	G91                            ; relative positioning
 	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
 	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
 	M84                            ; steppers off
 	G90                            ; absolute positioning
-	M117 TAZ 6 Ready.              ;{profile_string}
+	M117 Print complete            ; progress indicator message
+	;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
 	;Print time: {print_time}
diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_nutmeg_single-extruder_0.5noz_cura.ini
index 3fb5b1f185..825495e308 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_mangrove_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_nutmeg_single-extruder_0.5noz_cura.ini
@@ -7,7 +7,7 @@ fill_density = 20
 perimeter_before_infill = True
 nozzle_size = 0.5
 print_speed = 50
-print_temperature = 250
+print_temperature = 240
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
@@ -42,14 +42,14 @@ infill_speed = 30
 solidarea_speed = 45
 inset0_speed = 20
 insetx_speed = 25
-cool_min_layer_time = 20
+cool_min_layer_time = 10
 fan_enabled = True
 skirt_line_count = 1
 skirt_gap = 3.0
 skirt_minimal_length = 250
-fan_full_height = 0.5
-fan_speed = 40
-fan_speed_max = 50
+fan_full_height = 6
+fan_speed = 20
+fan_speed_max = 40
 cool_min_feedrate = 10
 cool_head_lift = False
 solid_top = True
@@ -88,20 +88,30 @@ simplemodematerial = 1_pla
 simplemodematerialtype = Beginner
 
 [alterations]
-start.gcode = G21
+start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer
+	;Basic slice data:
+	;Sliced at: {day} {date} {time}
+	;Layer height: {layer_height}
+	;Walls: {wall_thickness}
+	;Fill: {fill_density}
+	;Estimated Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+    G26                          ; clear potential 'probe fail' condition
+	G21                          ; set units to Millimetres
 	M107                         ; disable fans
-	G21                          ; metric values
 	G90                          ; absolute positioning
 	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
 	G92 E0                       ; set extruder position to 0
 	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S150                    ; set to cleaning temp and wait
+    G28 XY                       ; home X and Y
+    G1 X-19 Y258 F1000           ; move to safe homing position
+    M109 S170                    ; soften filament for z homing
+    G28 Z                        ; home Z
+    M104 S170                    ; cool to probing temp during wipe
 	G1 E-30 F100                 ; suck up XXmm of filament
-	M109 S170                    ; heat to probe temp
 	G1 X-15 Y100 F3000           ; move above wiper pad
-	G1 Z2                        ; Push nozzle into wiper
+	G1 Z1                        ; push nozzle into wiper
 	G1 X-17 Y95 F1000            ; slow wipe
 	G1 X-17 Y90 F1000            ; slow wipe
 	G1 X-17 Y85 F1000            ; slow wipe
@@ -126,31 +136,36 @@ start.gcode = G21
 	G1 X-15 Y25 Z1.5 F1000       ; slow wipe
 	G1 X-17 Y23 F1000            ; slow wipe
 	G1 Z10                       ; raise extruder
-	G1 Y10                       ; move above probe
-	M109 S170                    ; set to probing temp
+	M109 S170                    ; heat to probe temp
+	G1 X-11 Y-8                  ; move above probe
 	M204 S100                    ; set accel for probing
-	G29                          ; Probe
-	M204 S700                    ; set accel back to normal
+	G29                          ; probe sequence (for auto-leveling)
+	M204 S500                    ; set accel back to normal
 	G1 X0 Y0 Z15 F5000           ; get out the way
 	M400                         ; clear buffer
 	G4 S1                        ; pause
+	M117 Heating...              ; LCD status message
+	M140 S{print_bed_temperature}; get bed heating up
 	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
+	M190 S{print_bed_temperature}; get bed temping up during first layer
 	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-	M117 Taz Printing...         ; Message
-end.gcode = M400
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
 	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
 	M107                           ; fans off
 	G91                            ; relative positioning
 	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
 	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
 	M84                            ; steppers off
 	G90                            ; absolute positioning
-	M117 TAZ 6 Ready.              ;{profile_string}
+	M117 Print complete            ; progress indicator message
+	;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
 	;Print time: {print_time}
diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_nutmeg_single-extruder_0.5noz_cura.ini
index 7474168ed5..c6129c40e5 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_mangrove_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_nutmeg_single-extruder_0.5noz_cura.ini
@@ -7,7 +7,7 @@ fill_density = 20
 perimeter_before_infill = True
 nozzle_size = 0.5
 print_speed = 50
-print_temperature = 250
+print_temperature = 240
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
@@ -47,7 +47,7 @@ fan_enabled = True
 skirt_line_count = 1
 skirt_gap = 3.0
 skirt_minimal_length = 250
-fan_full_height = 0.5
+fan_full_height = 6
 fan_speed = 40
 fan_speed_max = 50
 cool_min_feedrate = 10
@@ -88,20 +88,30 @@ simplemodematerial = 1_pla
 simplemodematerialtype = Beginner
 
 [alterations]
-start.gcode = G21
+start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer
+	;Basic slice data:
+	;Sliced at: {day} {date} {time}
+	;Layer height: {layer_height}
+	;Walls: {wall_thickness}
+	;Fill: {fill_density}
+	;Estimated Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+    G26                          ; clear potential 'probe fail' condition
+	G21                          ; set units to Millimetres
 	M107                         ; disable fans
-	G21                          ; metric values
 	G90                          ; absolute positioning
 	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
 	G92 E0                       ; set extruder position to 0
 	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S150                    ; set to cleaning temp and wait
+    G28 XY                       ; home X and Y
+    G1 X-19 Y258 F1000           ; move to safe homing position
+    M109 S170                    ; soften filament for z homing
+    G28 Z                        ; home Z
+    M104 S170                    ; cool to probing temp during wipe
 	G1 E-30 F100                 ; suck up XXmm of filament
-	M109 S170                    ; heat to probe temp
 	G1 X-15 Y100 F3000           ; move above wiper pad
-	G1 Z2                        ; Push nozzle into wiper
+	G1 Z1                        ; push nozzle into wiper
 	G1 X-17 Y95 F1000            ; slow wipe
 	G1 X-17 Y90 F1000            ; slow wipe
 	G1 X-17 Y85 F1000            ; slow wipe
@@ -126,31 +136,36 @@ start.gcode = G21
 	G1 X-15 Y25 Z1.5 F1000       ; slow wipe
 	G1 X-17 Y23 F1000            ; slow wipe
 	G1 Z10                       ; raise extruder
-	G1 Y10                       ; move above probe
-	M109 S170                    ; set to probing temp
+	M109 S170                    ; heat to probe temp
+	G1 X-11 Y-8                  ; move above probe
 	M204 S100                    ; set accel for probing
-	G29                          ; Probe
-	M204 S700                    ; set accel back to normal
+	G29                          ; probe sequence (for auto-leveling)
+	M204 S500                    ; set accel back to normal
 	G1 X0 Y0 Z15 F5000           ; get out the way
 	M400                         ; clear buffer
 	G4 S1                        ; pause
+	M117 Heating...              ; LCD status message
+	M140 S{print_bed_temperature}; get bed heating up
 	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
+	M190 S{print_bed_temperature}; get bed temping up during first layer
 	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-	M117 Taz Printing...         ; Message
-end.gcode = M400
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
 	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
 	M107                           ; fans off
 	G91                            ; relative positioning
 	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
 	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
 	M84                            ; steppers off
 	G90                            ; absolute positioning
-	M117 TAZ 6 Ready.              ;{profile_string}
+	M117 Print complete            ; progress indicator message
+	;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
 	;Print time: {print_time}
diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_medium-speed_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_medium-speed_nutmeg_single-extruder_0.5noz_cura.ini
index 50505cb36c..14c55e0586 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_medium-speed_mangrove_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_medium-speed_nutmeg_single-extruder_0.5noz_cura.ini
@@ -7,7 +7,7 @@ fill_density = 20
 perimeter_before_infill = True
 nozzle_size = 0.5
 print_speed = 50
-print_temperature = 250
+print_temperature = 240
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
@@ -42,14 +42,14 @@ infill_speed = 50
 solidarea_speed = 45
 inset0_speed = 30
 insetx_speed = 35
-cool_min_layer_time = 20
+cool_min_layer_time = 15
 fan_enabled = True
 skirt_line_count = 1
 skirt_gap = 3.0
 skirt_minimal_length = 250
-fan_full_height = 0.5
-fan_speed = 40
-fan_speed_max = 50
+fan_full_height = 6
+fan_speed = 20
+fan_speed_max = 40
 cool_min_feedrate = 10
 cool_head_lift = False
 solid_top = True
@@ -88,20 +88,30 @@ simplemodematerial = 1_pla
 simplemodematerialtype = Beginner
 
 [alterations]
-start.gcode = G21
+start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer
+	;Basic slice data:
+	;Sliced at: {day} {date} {time}
+	;Layer height: {layer_height}
+	;Walls: {wall_thickness}
+	;Fill: {fill_density}
+	;Estimated Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+    G26                          ; clear potential 'probe fail' condition
+	G21                          ; set units to Millimetres
 	M107                         ; disable fans
-	G21                          ; metric values
 	G90                          ; absolute positioning
 	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
 	G92 E0                       ; set extruder position to 0
 	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S150                    ; set to cleaning temp and wait
+    G28 XY                       ; home X and Y
+    G1 X-19 Y258 F1000           ; move to safe homing position
+    M109 S170                    ; soften filament for z homing
+    G28 Z                        ; home Z
+    M104 S170                    ; cool to probing temp during wipe
 	G1 E-30 F100                 ; suck up XXmm of filament
-	M109 S170                    ; heat to probe temp
 	G1 X-15 Y100 F3000           ; move above wiper pad
-	G1 Z2                        ; Push nozzle into wiper
+	G1 Z1                        ; push nozzle into wiper
 	G1 X-17 Y95 F1000            ; slow wipe
 	G1 X-17 Y90 F1000            ; slow wipe
 	G1 X-17 Y85 F1000            ; slow wipe
@@ -126,31 +136,36 @@ start.gcode = G21
 	G1 X-15 Y25 Z1.5 F1000       ; slow wipe
 	G1 X-17 Y23 F1000            ; slow wipe
 	G1 Z10                       ; raise extruder
-	G1 Y10                       ; move above probe
-	M109 S170                    ; set to probing temp
+	M109 S170                    ; heat to probe temp
+	G1 X-11 Y-8                  ; move above probe
 	M204 S100                    ; set accel for probing
-	G29                          ; Probe
-	M204 S700                    ; set accel back to normal
+	G29                          ; probe sequence (for auto-leveling)
+	M204 S500                    ; set accel back to normal
 	G1 X0 Y0 Z15 F5000           ; get out the way
 	M400                         ; clear buffer
 	G4 S1                        ; pause
+	M117 Heating...              ; LCD status message
+	M140 S{print_bed_temperature}; get bed heating up
 	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
+	M190 S{print_bed_temperature}; get bed temping up during first layer
 	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-	M117 Taz Printing...         ; Message
-end.gcode = M400
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
 	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
 	M107                           ; fans off
 	G91                            ; relative positioning
 	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
 	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
 	M84                            ; steppers off
 	G90                            ; absolute positioning
-	M117 TAZ 6 Ready.              ;{profile_string}
+	M117 Print complete            ; progress indicator message
+	;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
 	;Print time: {print_time}
diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PC-ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PC-ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini
deleted file mode 100644
index 2f383177d0..0000000000
--- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PC-ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini
+++ /dev/null
@@ -1,297 +0,0 @@
-[profile]
-layer_height = 0.38
-wall_thickness = 1.0
-retraction_enable = True
-solid_layer_thickness = 1.04
-fill_density = 20
-perimeter_before_infill = True
-nozzle_size = 0.5
-print_speed = 50
-print_temperature = 270
-print_temperature2 = 0
-print_temperature3 = 0
-print_temperature4 = 0
-print_temperature5 = 0
-print_bed_temperature = 115
-support = None
-platform_adhesion = None
-support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
-ooze_shield = False
-filament_diameter = 2.85
-filament_diameter2 = 0
-filament_diameter3 = 0
-filament_diameter4 = 0
-filament_diameter5 = 0
-filament_flow = 100.0
-retraction_speed = 10
-retraction_amount = 1
-retraction_dual_amount = 16.5
-retraction_min_travel = 1.5
-retraction_combing = All
-retraction_minimal_extrusion = 0.005
-retraction_hop = 0.1
-bottom_thickness = 0.425
-layer0_width_factor = 125
-object_sink = 0.0
-overlap_dual = 0.15
-travel_speed = 175
-bottom_layer_speed = 15
-infill_speed = 55
-solidarea_speed = 45
-inset0_speed = 45
-insetx_speed = 50
-cool_min_layer_time = 15
-fan_enabled = True
-skirt_line_count = 1
-skirt_gap = 3.0
-skirt_minimal_length = 250
-fan_full_height = 0.5
-fan_speed = 40
-fan_speed_max = 60
-cool_min_feedrate = 10
-cool_head_lift = False
-solid_top = True
-solid_bottom = True
-fill_overlap = 15
-support_type = Lines
-support_angle = 45
-support_fill_rate = 30
-support_xy_distance = 0.7
-support_z_distance = 0.05
-spiralize = False
-simple_mode = False
-brim_line_count = 10
-raft_margin = 5.0
-raft_line_spacing = 3.0
-raft_base_thickness = 0.3
-raft_base_linewidth = 1.0
-raft_interface_thickness = 0.27
-raft_interface_linewidth = 0.4
-raft_airgap_all = 0.0
-raft_airgap = 0.5
-raft_surface_layers = 2
-raft_surface_thickness = 0.27
-raft_surface_linewidth = 0.4
-fix_horrible_union_all_type_a = True
-fix_horrible_union_all_type_b = False
-fix_horrible_use_open_bits = False
-fix_horrible_extensive_stitching = False
-plugin_config = (lp1
-	.
-object_center_x = -1
-object_center_y = -1
-simplemodesettings = 
-simplemodeprofile = 2_normal
-simplemodematerial = 1_pla
-simplemodematerialtype = Beginner
-
-[alterations]
-start.gcode = G21
-	M107                         ; disable fans
-	G21                          ; metric values
-	G90                          ; absolute positioning
-	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
-	G92 E0                       ; set extruder position to 0
-	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S150                    ; set to cleaning temp and wait
-	G1 E-30 F100                 ; suck up XXmm of filament
-	M109 S170                    ; heat to probe temp
-	G1 X-15 Y100 F3000           ; move above wiper pad
-	G1 Z2                        ; Push nozzle into wiper
-	G1 X-17 Y95 F1000            ; slow wipe
-	G1 X-17 Y90 F1000            ; slow wipe
-	G1 X-17 Y85 F1000            ; slow wipe
-	G1 X-15 Y90 F1000            ; slow wipe
-	G1 X-17 Y80 F1000            ; slow wipe
-	G1 X-15 Y95 F1000            ; slow wipe
-	G1 X-17 Y75 F2000            ; fast wipe
-	G1 X-15 Y65 F2000            ; fast wipe
-	G1 X-17 Y70 F2000            ; fast wipe
-	G1 X-15 Y60 F2000            ; fast wipe
-	G1 X-17 Y55 F2000            ; fast wipe
-	G1 X-15 Y50 F2000            ; fast wipe
-	G1 X-17 Y40 F2000            ; fast wipe
-	G1 X-15 Y45 F2000            ; fast wipe
-	G1 X-17 Y35 F2000            ; fast wipe
-	G1 X-15 Y40 F2000            ; fast wipe
-	G1 X-17 Y70 F2000            ; fast wipe
-	G1 X-15 Y30 Z2 F2000         ; fast wipe
-	G1 X-17 Y35 F2000            ; fast wipe
-	G1 X-15 Y25 F2000            ; fast wipe
-	G1 X-17 Y30 F2000            ; fast wipe
-	G1 X-15 Y25 Z1.5 F1000       ; slow wipe
-	G1 X-17 Y23 F1000            ; slow wipe
-	G1 Z10                       ; raise extruder
-	G1 Y10                       ; move above probe
-	M109 S170                    ; set to probing temp
-	M204 S100                    ; set accel for probing
-	G29                          ; Probe
-	M204 S700                    ; set accel back to normal
-	G1 X0 Y0 Z15 F5000           ; get out the way
-	M400                         ; clear buffer
-	G4 S1                        ; pause
-	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
-	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-	M117 Taz Printing...         ; Message
-end.gcode = M400
-	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
-	M107                           ; fans off
-	G91                            ; relative positioning
-	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
-	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
-	M84                            ; steppers off
-	G90                            ; absolute positioning
-	M117 TAZ 6 Ready.
-	;{profile_string}
-start2.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end2.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-start3.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T2                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end3.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M104 T2 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-start4.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T3                      ;Switch to the 4th extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T2                      ;Switch to the 3th extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end4.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M104 T2 S0                     ;extruder heater off
-	M104 T3 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-support_start.gcode = 
-support_end.gcode = 
-cool_start.gcode = 
-cool_end.gcode = 
-replace.csv = 
-preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
-	;This code is added before the T(n)
-postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
-	;This code is added after the T(n)
-
diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_nutmeg_single-extruder_0.5noz_cura.ini
index 23bdc1d64e..68d7fecabc 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_mangrove_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_nutmeg_single-extruder_0.5noz_cura.ini
@@ -47,8 +47,8 @@ fan_enabled = True
 skirt_line_count = 1
 skirt_gap = 3.0
 skirt_minimal_length = 250
-fan_full_height = 0.5
-fan_speed = 75
+fan_full_height = 6
+fan_speed = 80
 fan_speed_max = 100
 cool_min_feedrate = 10
 cool_head_lift = False
@@ -87,20 +87,30 @@ simplemodematerial = 1_pla
 simplemodematerialtype = Beginner
 
 [alterations]
-start.gcode = G21
+start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer
+	;Basic slice data:
+	;Sliced at: {day} {date} {time}
+	;Layer height: {layer_height}
+	;Walls: {wall_thickness}
+	;Fill: {fill_density}
+	;Estimated Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+    G26                          ; clear potential 'probe fail' condition
+	G21                          ; set units to Millimetres
 	M107                         ; disable fans
-	G21                          ; metric values
 	G90                          ; absolute positioning
 	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
 	G92 E0                       ; set extruder position to 0
 	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S130                    ; set to cleaning temp and wait
+    G28 XY                       ; home X and Y
+    G1 X-19 Y258 F1000           ; move to safe homing position
+    M109 S170                    ; soften filament for z homing
+    G28 Z                        ; home Z
+    M104 S170                    ; cool to probing temp during wipe
 	G1 E-30 F100                 ; suck up XXmm of filament
-	M109 S140                    ; heat to probe temp
 	G1 X-15 Y100 F3000           ; move above wiper pad
-	G1 Z2                        ; Push nozzle into wiper
+	G1 Z1                        ; push nozzle into wiper
 	G1 X-17 Y95 F1000            ; slow wipe
 	G1 X-17 Y90 F1000            ; slow wipe
 	G1 X-17 Y85 F1000            ; slow wipe
@@ -125,31 +135,36 @@ start.gcode = G21
 	G1 X-15 Y25 Z1.5 F1000       ; slow wipe
 	G1 X-17 Y23 F1000            ; slow wipe
 	G1 Z10                       ; raise extruder
-	G1 Y10                       ; move above probe
-	M109 S170                    ; set to probing temp
+	M109 S150                    ; heat to probe temp
+	G1 X-11 Y-8                  ; move above probe
 	M204 S100                    ; set accel for probing
-	G29                          ; Probe
-	M204 S700                    ; set accel back to normal
+	G29                          ; probe sequence (for auto-leveling)
+	M204 S500                    ; set accel back to normal
 	G1 X0 Y0 Z15 F5000           ; get out the way
 	M400                         ; clear buffer
 	G4 S1                        ; pause
+	M117 Heating...              ; LCD status message
+	M140 S{print_bed_temperature}; get bed heating up
 	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
+	M190 S{print_bed_temperature}; get bed temping up during first layer
 	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-	M117 Taz Printing...         ; Message
-end.gcode = M400
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
 	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
 	M107                           ; fans off
 	G91                            ; relative positioning
 	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
 	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
 	M84                            ; steppers off
 	G90                            ; absolute positioning
-	M117 TAZ 6 Ready.              ;{profile_string}
+	M117 Print complete            ; progress indicator message
+	;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
 	;Print time: {print_time}
diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_nutmeg_single-extruder_0.5noz_cura.ini
index 78f73af992..73efc8abd1 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_mangrove_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_nutmeg_single-extruder_0.5noz_cura.ini
@@ -1,5 +1,5 @@
 [profile]
-layer_height = 0.22
+layer_height = 0.38
 wall_thickness = 1.0
 retraction_enable = True
 solid_layer_thickness = 0.88
@@ -47,8 +47,8 @@ fan_enabled = True
 skirt_line_count = 1
 skirt_gap = 3.0
 skirt_minimal_length = 250
-fan_full_height = 0.5
-fan_speed = 60
+fan_full_height = 6
+fan_speed = 80
 fan_speed_max = 100
 cool_min_feedrate = 10
 cool_head_lift = False
@@ -88,19 +88,30 @@ simplemodematerial = 1_pla
 simplemodematerialtype = Beginner
 
 [alterations]
-start.gcode = G21
+start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer
+	;Basic slice data:
+	;Sliced at: {day} {date} {time}
+	;Layer height: {layer_height}
+	;Walls: {wall_thickness}
+	;Fill: {fill_density}
+	;Estimated Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+    G26                          ; clear potential 'probe fail' condition
+	G21                          ; set units to Millimetres
 	M107                         ; disable fans
-	G21                          ; metric values
 	G90                          ; absolute positioning
 	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
 	G92 E0                       ; set extruder position to 0
 	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S130                    ; set to cleaning temp and wait
+    G28 XY                       ; home X and Y
+    G1 X-19 Y258 F1000           ; move to safe homing position
+    M109 S170                    ; soften filament for z homing
+    G28 Z                        ; home Z
+    M104 S170                    ; cool to probing temp during wipe
 	G1 E-30 F100                 ; suck up XXmm of filament
 	G1 X-15 Y100 F3000           ; move above wiper pad
-	G1 Z2                        ; Push nozzle into wiper
+	G1 Z1                        ; push nozzle into wiper
 	G1 X-17 Y95 F1000            ; slow wipe
 	G1 X-17 Y90 F1000            ; slow wipe
 	G1 X-17 Y85 F1000            ; slow wipe
@@ -124,32 +135,36 @@ start.gcode = G21
 	G1 X-17 Y30 F2000            ; fast wipe
 	G1 X-15 Y25 Z1.5 F1000       ; slow wipe
 	G1 X-17 Y23 F1000            ; slow wipe
-	M109 S140                    ; heat to probe temp
 	G1 Z10                       ; raise extruder
+	M109 S150                    ; heat to probe temp
 	G1 X-11 Y-8                  ; move above probe
 	M204 S100                    ; set accel for probing
-	G29                          ; Probe
-	M204 S700                    ; set accel back to normal
+	G29                          ; probe sequence (for auto-leveling)
+	M204 S500                    ; set accel back to normal
 	G1 X0 Y0 Z15 F5000           ; get out the way
 	M400                         ; clear buffer
 	G4 S1                        ; pause
+	M117 Heating...              ; LCD status message
+	M140 S{print_bed_temperature}; get bed heating up
 	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
+	M190 S{print_bed_temperature}; get bed temping up during first layer
 	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-	M117 Taz Printing...         ; Message
-end.gcode = M400
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
 	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
 	M107                           ; fans off
 	G91                            ; relative positioning
 	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
 	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
 	M84                            ; steppers off
 	G90                            ; absolute positioning
-	M117 TAZ 6 Ready.
+	M117 Print complete            ; progress indicator message
 	;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_nutmeg_single-extruder_0.5noz_cura.ini
index 728af6c89d..2c169ffc1b 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_mangrove_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_nutmeg_single-extruder_0.5noz_cura.ini
@@ -1,8 +1,8 @@
 [profile]
-layer_height = 0.38
+layer_height = 0.25
 wall_thickness = 1.0
 retraction_enable = True
-solid_layer_thickness = 0.88
+solid_layer_thickness = 0.75
 fill_density = 20
 perimeter_before_infill = True
 nozzle_size = 0.5
@@ -38,18 +38,18 @@ object_sink = 0.0
 overlap_dual = 0.15
 travel_speed = 175
 bottom_layer_speed = 15
-infill_speed = 55
-solidarea_speed = 45
-inset0_speed = 45
-insetx_speed = 50
-cool_min_layer_time = 15
+infill_speed = 50
+solidarea_speed = 40
+inset0_speed = 40
+insetx_speed = 45
+cool_min_layer_time = 10
 fan_enabled = True
 skirt_line_count = 1
 skirt_gap = 3.0
 skirt_minimal_length = 250
-fan_full_height = 0.5
-fan_speed = 40
-fan_speed_max = 60
+fan_full_height = 6
+fan_speed = 80
+fan_speed_max = 100
 cool_min_feedrate = 10
 cool_head_lift = False
 solid_top = True
@@ -88,20 +88,30 @@ simplemodematerial = 1_pla
 simplemodematerialtype = Beginner
 
 [alterations]
-start.gcode = G21
+start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer
+	;Basic slice data:
+	;Sliced at: {day} {date} {time}
+	;Layer height: {layer_height}
+	;Walls: {wall_thickness}
+	;Fill: {fill_density}
+	;Estimated Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+    G26                          ; clear potential 'probe fail' condition
+	G21                          ; set units to Millimetres
 	M107                         ; disable fans
-	G21                          ; metric values
 	G90                          ; absolute positioning
 	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
 	G92 E0                       ; set extruder position to 0
 	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S130                    ; set to cleaning temp and wait
+    G28 XY                       ; home X and Y
+    G1 X-19 Y258 F1000           ; move to safe homing position
+    M109 S170                    ; soften filament for z homing
+    G28 Z                        ; home Z
+    M104 S170                    ; cool to probing temp during wipe
 	G1 E-30 F100                 ; suck up XXmm of filament
-	M109 S140                    ; heat to probe temp
 	G1 X-15 Y100 F3000           ; move above wiper pad
-	G1 Z2                        ; Push nozzle into wiper
+	G1 Z1                        ; push nozzle into wiper
 	G1 X-17 Y95 F1000            ; slow wipe
 	G1 X-17 Y90 F1000            ; slow wipe
 	G1 X-17 Y85 F1000            ; slow wipe
@@ -126,31 +136,35 @@ start.gcode = G21
 	G1 X-15 Y25 Z1.5 F1000       ; slow wipe
 	G1 X-17 Y23 F1000            ; slow wipe
 	G1 Z10                       ; raise extruder
-	G1 Y10                       ; move above probe
-	M109 S170                    ; set to probing temp
+	M109 S150                    ; heat to probe temp
+	G1 X-11 Y-8                  ; move above probe
 	M204 S100                    ; set accel for probing
-	G29                          ; Probe
-	M204 S700                    ; set accel back to normal
+	G29                          ; probe sequence (for auto-leveling)
+	M204 S500                    ; set accel back to normal
 	G1 X0 Y0 Z15 F5000           ; get out the way
 	M400                         ; clear buffer
 	G4 S1                        ; pause
+	M117 Heating...              ; LCD status message
+	M140 S{print_bed_temperature}; get bed heating up
 	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S25                       ; wait for bed to temp up
+	M190 S{print_bed_temperature}; get bed temping up during first layer
 	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-	M117 Taz Printing...         ; Message
-end.gcode = M400
+	M117 TAZ Printing...         ; LCD status message
+end.gcode = ;
+	M400                           ; wait for moves to finish
 	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
 	M107                           ; fans off
 	G91                            ; relative positioning
 	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G1 Z+20 E-5 X-20 Y-20 F3000    ; move Z up a bit and retract filament even more
+	M117 Cooling please wait       ; progress indicator message
 	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
+	G1 Y0 F3000                    ; move to cooling position
+	M190 S50                       ; set bed to cool off
+	G1 Y280 F3000                  ; present finished print
 	M84                            ; steppers off
 	G90                            ; absolute positioning
-	M117 TAZ 6 Ready.
+	M117 Print complete            ; progress indicator message
 	;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}