Merge pull request #12488 from Ultimaker/PP-108_Improved_support_settings

PP-108 improved support settings

24 files changed, 0 insertions, 131 deletions

diff --git a/resources/variants/ultimaker3_aa0.25.inst.cfg b/resources/variants/ultimaker3_aa0.25.inst.cfg
index 1763fa9dfd..79b8afeebd 100644
--- a/resources/variants/ultimaker3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.25.inst.cfg
@@ -35,9 +35,7 @@ speed_topbottom = 20
 speed_wall = =math.ceil(speed_print * 30 / 55)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg
index a9189830ed..a5ae2a383e 100644
--- a/resources/variants/ultimaker3_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.8.inst.cfg
@@ -43,7 +43,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 35)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 20
diff --git a/resources/variants/ultimaker3_aa04.inst.cfg b/resources/variants/ultimaker3_aa04.inst.cfg
index bf9e8592d6..68a3a8768f 100644
--- a/resources/variants/ultimaker3_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_aa04.inst.cfg
@@ -31,9 +31,7 @@ speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg
index 148d621a21..bb31e90aaf 100644
--- a/resources/variants/ultimaker3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_bb0.8.inst.cfg
@@ -17,8 +17,6 @@ acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 /
 brim_width = 3
 cool_fan_speed = 50
 cool_min_speed = 5
-gradual_support_infill_step_height = 1.6
-gradual_support_infill_steps = 2
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
@@ -60,19 +58,7 @@ speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_angle = 60
 support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = 0
-support_infill_rate = 50
-support_infill_sparse_thickness = 0.4
 support_interface_enable = True
-support_interface_height = 0.6
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_offset = 1.5
-support_pattern = triangles
-support_use_towers = False
-support_xy_distance = =round(wall_line_width_0 * 0.75, 2)
-support_xy_distance_overhang = =wall_line_width_0 / 4
 support_z_distance = 0
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 12
diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg
index 7465a9c802..22fa5f2825 100644
--- a/resources/variants/ultimaker3_bb04.inst.cfg
+++ b/resources/variants/ultimaker3_bb04.inst.cfg
@@ -14,8 +14,6 @@ acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 cool_fan_speed_max = =cool_fan_speed
-gradual_support_infill_steps = 2
-machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0
 raft_base_speed = 20
@@ -30,15 +28,5 @@ speed_support_interface = =math.ceil(speed_support * 20 / 25)
 speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = 0
-support_infill_rate = 50
-support_infill_sparse_thickness = 0.2
 support_interface_enable = True
-support_interface_height = 0.6
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_offset = 3
-support_xy_distance = =round(wall_line_width_0 * 0.75, 2)
-support_xy_distance_overhang = =wall_line_width_0 / 2
 switch_extruder_retraction_amount = 12
diff --git a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
index ac7aa996c7..ea9b294671 100644
--- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
@@ -35,9 +35,7 @@ speed_topbottom = 20
 speed_wall = =math.ceil(speed_print * 30 / 55)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
index e9c918a48e..de525e3caf 100644
--- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
@@ -43,7 +43,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 35)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 20
diff --git a/resources/variants/ultimaker3_extended_aa04.inst.cfg b/resources/variants/ultimaker3_extended_aa04.inst.cfg
index 777f5a3a19..e928d24745 100644
--- a/resources/variants/ultimaker3_extended_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg
@@ -31,9 +31,7 @@ speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
index ed95e4b44a..d9a6762732 100644
--- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
@@ -17,8 +17,6 @@ acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 /
 brim_width = 3
 cool_fan_speed = 50
 cool_min_speed = 5
-gradual_support_infill_step_height = 1.6
-gradual_support_infill_steps = 2
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
@@ -60,19 +58,7 @@ speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_angle = 60
 support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = 0
-support_infill_rate = 50
-support_infill_sparse_thickness = 0.4
 support_interface_enable = True
-support_interface_height = 0.6
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_offset = 1.5
-support_pattern = triangles
-support_use_towers = False
-support_xy_distance = =round(wall_line_width_0 * 0.75, 2)
-support_xy_distance_overhang = =wall_line_width_0 / 4
 support_z_distance = 0
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 12
diff --git a/resources/variants/ultimaker3_extended_bb04.inst.cfg b/resources/variants/ultimaker3_extended_bb04.inst.cfg
index 7ec5df9128..d9a2e78fdb 100644
--- a/resources/variants/ultimaker3_extended_bb04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb04.inst.cfg
@@ -14,7 +14,6 @@ acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
 acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 cool_fan_speed_max = =cool_fan_speed
-gradual_support_infill_steps = 2
 machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0
@@ -30,15 +29,5 @@ speed_support_interface = =math.ceil(speed_support * 20 / 25)
 speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = 0
-support_infill_rate = 50
-support_infill_sparse_thickness = 0.2
 support_interface_enable = True
-support_interface_height = 0.6
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_offset = 3
-support_xy_distance = =round(wall_line_width_0 * 0.75, 2)
-support_xy_distance_overhang = =wall_line_width_0 / 2
 switch_extruder_retraction_amount = 12
diff --git a/resources/variants/ultimaker_s3_aa0.25.inst.cfg b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
index 14d1e3a7b8..c62479b084 100644
--- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
@@ -36,9 +36,7 @@ speed_topbottom = 20
 speed_wall = =math.ceil(speed_print * 30 / 55)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
index 63cfebe329..bc1f092e63 100644
--- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
@@ -44,7 +44,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 35)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 20
diff --git a/resources/variants/ultimaker_s3_aa04.inst.cfg b/resources/variants/ultimaker_s3_aa04.inst.cfg
index f6049f3c6d..d69988c9f5 100644
--- a/resources/variants/ultimaker_s3_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa04.inst.cfg
@@ -30,9 +30,7 @@ speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
index 1766d16d8f..ae728bfe3a 100644
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@@ -16,8 +16,6 @@ acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
 brim_width = 3
 cool_fan_speed = 50
 cool_min_speed = 5
-gradual_support_infill_step_height = 1.6
-gradual_support_infill_steps = 2
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
@@ -58,19 +56,7 @@ speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 speed_prime_tower = =math.ceil(speed_print * 7 / 35)
 support_angle = 60
 support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = 0
-support_infill_rate = 50
-support_infill_sparse_thickness = 0.4
 support_interface_enable = True
-support_interface_height = 0.6
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_offset = 1.5
-support_pattern = triangles
-support_use_towers = False
-support_xy_distance = =round(wall_line_width_0 * 0.75, 2)
-support_xy_distance_overhang = =wall_line_width_0 / 4
 support_z_distance = 0
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 12
diff --git a/resources/variants/ultimaker_s3_bb04.inst.cfg b/resources/variants/ultimaker_s3_bb04.inst.cfg
index 835c96b09e..c2145a92b1 100644
--- a/resources/variants/ultimaker_s3_bb04.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb04.inst.cfg
@@ -14,7 +14,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
 cool_fan_speed_max = =cool_fan_speed
-gradual_support_infill_steps = 2
 machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0
@@ -30,15 +29,5 @@ speed_support_interface = =math.ceil(speed_support * 20 / 25)
 speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = 0
-support_infill_rate = 50
-support_infill_sparse_thickness = 0.2
 support_interface_enable = True
-support_interface_height = 0.6
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_offset = 3
-support_xy_distance = =round(wall_line_width_0 * 0.75, 2)
-support_xy_distance_overhang = =wall_line_width_0 / 2
 switch_extruder_retraction_amount = 12
diff --git a/resources/variants/ultimaker_s3_cc04.inst.cfg b/resources/variants/ultimaker_s3_cc04.inst.cfg
index 9a5194ad15..ce432577ac 100644
--- a/resources/variants/ultimaker_s3_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc04.inst.cfg
@@ -35,9 +35,7 @@ speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
diff --git a/resources/variants/ultimaker_s3_cc06.inst.cfg b/resources/variants/ultimaker_s3_cc06.inst.cfg
index 8a839f040e..69f478d128 100644
--- a/resources/variants/ultimaker_s3_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc06.inst.cfg
@@ -35,9 +35,7 @@ speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
diff --git a/resources/variants/ultimaker_s5_aa0.25.inst.cfg b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
index edd2141acc..664c252577 100644
--- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
@@ -35,9 +35,7 @@ speed_topbottom = 20
 speed_wall = =math.ceil(speed_print * 30 / 55)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
index 5e55770225..9b1dfa0dc8 100644
--- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
@@ -45,7 +45,6 @@ speed_topbottom = =math.ceil(speed_print * 25 / 35)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = 20
diff --git a/resources/variants/ultimaker_s5_aa04.inst.cfg b/resources/variants/ultimaker_s5_aa04.inst.cfg
index 8453254625..bb1c355321 100644
--- a/resources/variants/ultimaker_s5_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@@ -30,9 +30,7 @@ speed_topbottom = =math.ceil(speed_print * 30 / 70)
 speed_wall = =math.ceil(speed_print * 30 / 70)
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
index 8811be723c..bf5802de0d 100644
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@@ -16,8 +16,6 @@ acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
 brim_width = 3
 cool_fan_speed = 50
 cool_min_speed = 5
-gradual_support_infill_step_height = 1.6
-gradual_support_infill_steps = 2
 infill_overlap = 0
 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 infill_wipe_dist = 0
@@ -57,20 +55,6 @@ speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 speed_prime_tower = =math.ceil(speed_print * 7 / 35)
 support_angle = 60
-support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = 0
-support_infill_rate = 50
-support_infill_sparse_thickness = 0.4
-support_interface_enable = True
-support_interface_height = 0.6
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_offset = 1.5
-support_pattern = triangles
-support_use_towers = False
-support_xy_distance = =wall_line_width_0
-support_xy_distance_overhang = =wall_line_width_0 / 4
 support_z_distance = 0
 switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 12
diff --git a/resources/variants/ultimaker_s5_bb04.inst.cfg b/resources/variants/ultimaker_s5_bb04.inst.cfg
index 4b7c64f635..dec114757b 100644
--- a/resources/variants/ultimaker_s5_bb04.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb04.inst.cfg
@@ -14,7 +14,6 @@ acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
 acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
 acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
 cool_fan_speed_max = =cool_fan_speed
-gradual_support_infill_steps = 2
 machine_nozzle_heat_up_speed = 1.5
 machine_nozzle_id = BB 0.4
 machine_nozzle_tip_outer_diameter = 1.0
@@ -30,15 +29,5 @@ speed_support_interface = =math.ceil(speed_support * 20 / 25)
 speed_support_bottom = =math.ceil(speed_support_interface * 10 / 20)
 speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = 0
-support_infill_rate = 50
-support_infill_sparse_thickness = 0.2
 support_interface_enable = True
-support_interface_height = 0.6
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_offset = 3
-support_xy_distance = =round(wall_line_width_0 * 0.75, 2)
-support_xy_distance_overhang = =wall_line_width_0 / 2
 switch_extruder_retraction_amount = 12
diff --git a/resources/variants/ultimaker_s5_cc04.inst.cfg b/resources/variants/ultimaker_s5_cc04.inst.cfg
index ac5420f127..36c9a0e417 100644
--- a/resources/variants/ultimaker_s5_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc04.inst.cfg
@@ -35,9 +35,7 @@ speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg
index 0d27f9cdce..c5ade7780f 100644
--- a/resources/variants/ultimaker_s5_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@@ -35,9 +35,7 @@ speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
 speed_wall_x = =speed_wall
 support_angle = 60
 support_bottom_distance = =support_z_distance / 2
-support_pattern = zigzag
 support_top_distance = =support_z_distance
-support_use_towers = True
 support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length