remove all wall_thickness statements

All print profiles are following the global rules, no print profile specific exceptions. PP-115

16 files changed, 0 insertions, 16 deletions

diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg
index abe079eeb5..1f75b862d0 100644
--- a/resources/variants/ultimaker3_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.8.inst.cfg
@@ -53,4 +53,3 @@ switch_extruder_prime_speed = 20
 switch_extruder_retraction_amount = 16.5
 top_bottom_thickness = 1.4
 wall_0_inset = 0
-wall_thickness = 2
diff --git a/resources/variants/ultimaker3_aa04.inst.cfg b/resources/variants/ultimaker3_aa04.inst.cfg
index 8362a52fb5..7c24475a38 100644
--- a/resources/variants/ultimaker3_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_aa04.inst.cfg
@@ -39,5 +39,4 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1.2
-wall_thickness = 1.3
 xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg
index af5daf9f11..43cd08faeb 100644
--- a/resources/variants/ultimaker3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_bb0.8.inst.cfg
@@ -84,4 +84,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 12
 top_bottom_thickness = 1
 wall_0_inset = 0
-wall_thickness = 1
diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
index 0f603036b8..bf8d74c344 100644
--- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg
@@ -53,4 +53,3 @@ switch_extruder_prime_speed = 20
 switch_extruder_retraction_amount = 16.5
 top_bottom_thickness = 1.4
 wall_0_inset = 0
-wall_thickness = 2
diff --git a/resources/variants/ultimaker3_extended_aa04.inst.cfg b/resources/variants/ultimaker3_extended_aa04.inst.cfg
index 2a523703b6..e875fd4263 100644
--- a/resources/variants/ultimaker3_extended_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg
@@ -39,5 +39,4 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1.2
-wall_thickness = 1.3
 xy_offset_layer_0 = =(-0.2 if adhesion_type == "skirt" or adhesion_type == "none" else 0) + xy_offset
\ No newline at end of file
diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
index b73d5c2bc7..9dbd34093d 100644
--- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
@@ -84,4 +84,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 12
 top_bottom_thickness = 1
 wall_0_inset = 0
-wall_thickness = 1
diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
index 3bc112c7fa..8284a48ce3 100644
--- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg
@@ -54,4 +54,3 @@ switch_extruder_prime_speed = 20
 switch_extruder_retraction_amount = 16.5
 top_bottom_thickness = 1.4
 wall_0_inset = 0
-wall_thickness = 2
diff --git a/resources/variants/ultimaker_s3_aa04.inst.cfg b/resources/variants/ultimaker_s3_aa04.inst.cfg
index 9e56a0e75e..5cbc772525 100644
--- a/resources/variants/ultimaker_s3_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa04.inst.cfg
@@ -38,4 +38,3 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1.2
-wall_thickness = 1.3
diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
index 5f6373338b..72d4cb3a9c 100644
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@@ -82,4 +82,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 12
 top_bottom_thickness = 1
 wall_0_inset = 0
-wall_thickness = 1
diff --git a/resources/variants/ultimaker_s3_cc04.inst.cfg b/resources/variants/ultimaker_s3_cc04.inst.cfg
index 3f61f5d326..7cd5454fbf 100644
--- a/resources/variants/ultimaker_s3_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc04.inst.cfg
@@ -43,4 +43,3 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = =layer_height * 6
-wall_thickness = =line_width * 3
diff --git a/resources/variants/ultimaker_s3_cc06.inst.cfg b/resources/variants/ultimaker_s3_cc06.inst.cfg
index 9a216b8506..a01a58fef8 100644
--- a/resources/variants/ultimaker_s3_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc06.inst.cfg
@@ -43,4 +43,3 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = =layer_height * 6
-wall_thickness = =line_width * 3
diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
index 75581681f9..2ec650e81d 100644
--- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg
@@ -54,4 +54,3 @@ switch_extruder_prime_speed = 20
 switch_extruder_retraction_amount = 16.5
 top_bottom_thickness = 1.4
 wall_0_inset = 0
-wall_thickness = 2
diff --git a/resources/variants/ultimaker_s5_aa04.inst.cfg b/resources/variants/ultimaker_s5_aa04.inst.cfg
index 923d8cadec..e5507ba661 100644
--- a/resources/variants/ultimaker_s5_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@@ -38,4 +38,3 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = 1.2
-wall_thickness = 1.3
diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
index 4c43f2da26..ae2b8020a4 100644
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@@ -82,4 +82,3 @@ switch_extruder_prime_speed = 15
 switch_extruder_retraction_amount = 12
 top_bottom_thickness = 1
 wall_0_inset = 0
-wall_thickness = 1
diff --git a/resources/variants/ultimaker_s5_cc04.inst.cfg b/resources/variants/ultimaker_s5_cc04.inst.cfg
index 6934706bcd..b745ab8a6c 100644
--- a/resources/variants/ultimaker_s5_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc04.inst.cfg
@@ -43,4 +43,3 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = =layer_height * 6
-wall_thickness = =line_width * 3
diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg
index 98821ca002..0a87570372 100644
--- a/resources/variants/ultimaker_s5_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@@ -43,4 +43,3 @@ support_z_distance = =layer_height * 2
 switch_extruder_prime_speed = =switch_extruder_retraction_speeds
 switch_extruder_retraction_amount = =machine_heat_zone_length
 top_bottom_thickness = =layer_height * 6
-wall_thickness = =line_width * 3