Revert "Added Definitions for all SVT FDM printers"

This reverts commit adc78e302400357b56b2c27a2908c366df858f94.

30 files changed, 0 insertions, 504 deletions

diff --git a/resources/variants/arjun300_0.2.inst.cfg b/resources/variants/arjun300_0.2.inst.cfg
deleted file mode 100644
index 1ca776abf6..0000000000
--- a/resources/variants/arjun300_0.2.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.2 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.2
diff --git a/resources/variants/arjun300_0.3.inst.cfg b/resources/variants/arjun300_0.3.inst.cfg
deleted file mode 100644
index 5a5e93747c..0000000000
--- a/resources/variants/arjun300_0.3.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.3 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.3
diff --git a/resources/variants/arjun300_0.4.inst.cfg b/resources/variants/arjun300_0.4.inst.cfg
deleted file mode 100644
index 762f52ea56..0000000000
--- a/resources/variants/arjun300_0.4.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.4 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.4
diff --git a/resources/variants/arjun300_0.5.inst.cfg b/resources/variants/arjun300_0.5.inst.cfg
deleted file mode 100644
index 3630266521..0000000000
--- a/resources/variants/arjun300_0.5.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.5 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.5
diff --git a/resources/variants/arjun300_0.6.inst.cfg b/resources/variants/arjun300_0.6.inst.cfg
deleted file mode 100644
index 71be6d368c..0000000000
--- a/resources/variants/arjun300_0.6.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.6 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.6
diff --git a/resources/variants/arjun300_0.8.inst.cfg b/resources/variants/arjun300_0.8.inst.cfg
deleted file mode 100644
index a4b00e67ce..0000000000
--- a/resources/variants/arjun300_0.8.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.8 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.8
diff --git a/resources/variants/arjun300_dm_0.2.inst.cfg b/resources/variants/arjun300_dm_0.2.inst.cfg
deleted file mode 100644
index 35f88bd8b6..0000000000
--- a/resources/variants/arjun300_dm_0.2.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.2 mm Nozzle
-version = 4
-definition = Arjun300_Duplication_Mode
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.2
diff --git a/resources/variants/arjun300_dm_0.3.inst.cfg b/resources/variants/arjun300_dm_0.3.inst.cfg
deleted file mode 100644
index f8a918dde5..0000000000
--- a/resources/variants/arjun300_dm_0.3.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.3 mm Nozzle
-version = 4
-definition = Arjun300_Duplication_Mode
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.3
diff --git a/resources/variants/arjun300_dm_0.4.inst.cfg b/resources/variants/arjun300_dm_0.4.inst.cfg
deleted file mode 100644
index 584997668a..0000000000
--- a/resources/variants/arjun300_dm_0.4.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.4 mm Nozzle
-version = 4
-definition = Arjun300_Duplication_Mode
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.4
diff --git a/resources/variants/arjun300_dm_0.5.inst.cfg b/resources/variants/arjun300_dm_0.5.inst.cfg
deleted file mode 100644
index e8ffb47096..0000000000
--- a/resources/variants/arjun300_dm_0.5.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.5 mm Nozzle
-version = 4
-definition = Arjun300_Duplication_Mode
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.5
diff --git a/resources/variants/arjun300_dm_0.6.inst.cfg b/resources/variants/arjun300_dm_0.6.inst.cfg
deleted file mode 100644
index 6013aea1f6..0000000000
--- a/resources/variants/arjun300_dm_0.6.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.6 mm Nozzle
-version = 4
-definition = Arjun300_Duplication_Mode
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.6
diff --git a/resources/variants/arjun300_dm_0.8.inst.cfg b/resources/variants/arjun300_dm_0.8.inst.cfg
deleted file mode 100644
index 39fab96d57..0000000000
--- a/resources/variants/arjun300_dm_0.8.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.8 mm Nozzle
-version = 4
-definition = Arjun300_Duplication_Mode
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.8
diff --git a/resources/variants/arjun300_pva_0.2.inst.cfg b/resources/variants/arjun300_pva_0.2.inst.cfg
deleted file mode 100644
index afab6c50f4..0000000000
--- a/resources/variants/arjun300_pva_0.2.inst.cfg
+++ /dev/null
@@ -1,32 +0,0 @@
-[general]
-name = PVA 0.2 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.2
-support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
-support_offset = 3
-support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = =layer_height
-support_infill_rate = 50
-support_interface_enable = True
-support_interface_height = =layer_height * 5
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_xy_distance = =machine_nozzle_size / 2
-support_xy_distance_overhang = =machine_nozzle_size / 2
-support_angle = 45
-support_pattern = triangles
-support_use_towers = False
-support_z_distance = 0
-gradual_support_infill_steps = 2
-support_interface_density = 100
-support_interface_pattern = concentric
\ No newline at end of file
diff --git a/resources/variants/arjun300_pva_0.3.inst.cfg b/resources/variants/arjun300_pva_0.3.inst.cfg
deleted file mode 100644
index a1fa979e62..0000000000
--- a/resources/variants/arjun300_pva_0.3.inst.cfg
+++ /dev/null
@@ -1,32 +0,0 @@
-[general]
-name = PVA 0.3 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.3
-support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
-support_offset = 3
-support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = =layer_height
-support_infill_rate = 50
-support_interface_enable = True
-support_interface_height = =layer_height * 5
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_xy_distance = =machine_nozzle_size / 2
-support_xy_distance_overhang = =machine_nozzle_size / 2
-support_angle = 45
-support_pattern = triangles
-support_use_towers = False
-support_z_distance = 0
-gradual_support_infill_steps = 2
-support_interface_density = 100
-support_interface_pattern = concentric
\ No newline at end of file
diff --git a/resources/variants/arjun300_pva_0.4.inst.cfg b/resources/variants/arjun300_pva_0.4.inst.cfg
deleted file mode 100644
index a8a1617b66..0000000000
--- a/resources/variants/arjun300_pva_0.4.inst.cfg
+++ /dev/null
@@ -1,32 +0,0 @@
-[general]
-name = PVA 0.4 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.4
-support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
-support_offset = 3
-support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = =layer_height
-support_infill_rate = 50
-support_interface_enable = True
-support_interface_height = =layer_height * 5
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_xy_distance = =machine_nozzle_size / 2
-support_xy_distance_overhang = =machine_nozzle_size / 2
-support_angle = 45
-support_pattern = triangles
-support_use_towers = False
-support_z_distance = 0
-gradual_support_infill_steps = 2
-support_interface_density = 100
-support_interface_pattern = concentric
\ No newline at end of file
diff --git a/resources/variants/arjun300_pva_0.5.inst.cfg b/resources/variants/arjun300_pva_0.5.inst.cfg
deleted file mode 100644
index f81702d051..0000000000
--- a/resources/variants/arjun300_pva_0.5.inst.cfg
+++ /dev/null
@@ -1,32 +0,0 @@
-[general]
-name = PVA 0.5 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.5
-support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
-support_offset = 3
-support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = =layer_height
-support_infill_rate = 50
-support_interface_enable = True
-support_interface_height = =layer_height * 5
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_xy_distance = =machine_nozzle_size / 2
-support_xy_distance_overhang = =machine_nozzle_size / 2
-support_angle = 45
-support_pattern = triangles
-support_use_towers = False
-support_z_distance = 0
-gradual_support_infill_steps = 2
-support_interface_density = 100
-support_interface_pattern = concentric
\ No newline at end of file
diff --git a/resources/variants/arjun300_pva_0.6.inst.cfg b/resources/variants/arjun300_pva_0.6.inst.cfg
deleted file mode 100644
index 013d6c6e2b..0000000000
--- a/resources/variants/arjun300_pva_0.6.inst.cfg
+++ /dev/null
@@ -1,32 +0,0 @@
-[general]
-name = PVA 0.6 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.6
-support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
-support_offset = 3
-support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = =layer_height
-support_infill_rate = 50
-support_interface_enable = True
-support_interface_height = =layer_height * 5
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_xy_distance = =machine_nozzle_size / 2
-support_xy_distance_overhang = =machine_nozzle_size / 2
-support_angle = 45
-support_pattern = triangles
-support_use_towers = False
-support_z_distance = 0
-gradual_support_infill_steps = 2
-support_interface_density = 100
-support_interface_pattern = concentric
\ No newline at end of file
diff --git a/resources/variants/arjun300_pva_0.8.inst.cfg b/resources/variants/arjun300_pva_0.8.inst.cfg
deleted file mode 100644
index 09f1b85682..0000000000
--- a/resources/variants/arjun300_pva_0.8.inst.cfg
+++ /dev/null
@@ -1,32 +0,0 @@
-[general]
-name = PVA 0.8 mm Nozzle
-version = 4
-definition = arjun300
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.8
-support_infill_sparse_thickness = =(layer_height * 2) if (layer_height * 2) <= 0.75 * machine_nozzle_size else layer_height
-support_offset = 3
-support_bottom_height = =layer_height * 2
-support_bottom_pattern = zigzag
-support_bottom_stair_step_height = =layer_height
-support_infill_rate = 50
-support_interface_enable = True
-support_interface_height = =layer_height * 5
-support_interface_skip_height = =layer_height
-support_join_distance = 3
-support_xy_distance = =machine_nozzle_size / 2
-support_xy_distance_overhang = =machine_nozzle_size / 2
-support_angle = 45
-support_pattern = triangles
-support_use_towers = False
-support_z_distance = 0
-gradual_support_infill_steps = 2
-support_interface_density = 100
-support_interface_pattern = concentric
\ No newline at end of file
diff --git a/resources/variants/diy220_0.2.inst.cfg b/resources/variants/diy220_0.2.inst.cfg
deleted file mode 100644
index 0bf5aa0960..0000000000
--- a/resources/variants/diy220_0.2.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.2 mm Nozzle
-version = 4
-definition = diy220
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.2
diff --git a/resources/variants/diy220_0.3.inst.cfg b/resources/variants/diy220_0.3.inst.cfg
deleted file mode 100644
index 100f519c46..0000000000
--- a/resources/variants/diy220_0.3.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.3 mm Nozzle
-version = 4
-definition = diy220
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.3
diff --git a/resources/variants/diy220_0.4.inst.cfg b/resources/variants/diy220_0.4.inst.cfg
deleted file mode 100644
index 8b9ea0d05a..0000000000
--- a/resources/variants/diy220_0.4.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.4 mm Nozzle
-version = 4
-definition = diy220
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.4
diff --git a/resources/variants/diy220_0.5.inst.cfg b/resources/variants/diy220_0.5.inst.cfg
deleted file mode 100644
index dc509290a2..0000000000
--- a/resources/variants/diy220_0.5.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.5 mm Nozzle
-version = 4
-definition = diy220
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.5
diff --git a/resources/variants/diy220_0.6.inst.cfg b/resources/variants/diy220_0.6.inst.cfg
deleted file mode 100644
index f608997acb..0000000000
--- a/resources/variants/diy220_0.6.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.6 mm Nozzle
-version = 4
-definition = diy220
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.6
diff --git a/resources/variants/diy220_0.8.inst.cfg b/resources/variants/diy220_0.8.inst.cfg
deleted file mode 100644
index 3f4c3e1276..0000000000
--- a/resources/variants/diy220_0.8.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.8 mm Nozzle
-version = 4
-definition = diy220
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.8
diff --git a/resources/variants/diy400_0.2.inst.cfg b/resources/variants/diy400_0.2.inst.cfg
deleted file mode 100644
index 8fe2504857..0000000000
--- a/resources/variants/diy400_0.2.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.2 mm Nozzle
-version = 4
-definition = diy400
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.2
diff --git a/resources/variants/diy400_0.3.inst.cfg b/resources/variants/diy400_0.3.inst.cfg
deleted file mode 100644
index 2c52b559b7..0000000000
--- a/resources/variants/diy400_0.3.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.3 mm Nozzle
-version = 4
-definition = diy400
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.3
diff --git a/resources/variants/diy400_0.4.inst.cfg b/resources/variants/diy400_0.4.inst.cfg
deleted file mode 100644
index 1f247c6ea0..0000000000
--- a/resources/variants/diy400_0.4.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.4 mm Nozzle
-version = 4
-definition = diy400
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.4
diff --git a/resources/variants/diy400_0.5.inst.cfg b/resources/variants/diy400_0.5.inst.cfg
deleted file mode 100644
index 14edde5e16..0000000000
--- a/resources/variants/diy400_0.5.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.5 mm Nozzle
-version = 4
-definition = diy400
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.5
diff --git a/resources/variants/diy400_0.6.inst.cfg b/resources/variants/diy400_0.6.inst.cfg
deleted file mode 100644
index 9d39cd7380..0000000000
--- a/resources/variants/diy400_0.6.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.6 mm Nozzle
-version = 4
-definition = diy400
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.6
diff --git a/resources/variants/diy400_0.8.inst.cfg b/resources/variants/diy400_0.8.inst.cfg
deleted file mode 100644
index 1e41ac9628..0000000000
--- a/resources/variants/diy400_0.8.inst.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-[general]
-name = 0.8 mm Nozzle
-version = 4
-definition = diy400
-
-[metadata]
-
-setting_version = 13
-type = variant
-hardware_type = nozzle
-
-[values]
-machine_nozzle_size = 0.8