diff options
author | nickthetait <tait@alephobjects.com> | 2016-01-27 00:56:03 +0300 |
---|---|---|
committer | nickthetait <tait@alephobjects.com> | 2016-01-27 01:03:08 +0300 |
commit | fc50c6a3829f438b4f7040b6ca58dc3c85a09c60 (patch) | |
tree | 2bf7ae30bbaa41044a85067c32dd9b4e9d45fe69 /resources | |
parent | 71f1278e869e8087310c8c0ba754ccd34158bd67 (diff) |
Update stock quickprint profiles for TAZ6
Diffstat (limited to 'resources')
27 files changed, 357 insertions, 533 deletions
diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/high-quality/profile.ini index 9534d6b984..f9f6b60137 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/high-quality/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/high-quality/profile.ini @@ -1,4 +1,4 @@ [info] name = High detail order = 2 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/ABS_high-quality_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/ABS_high-quality_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/high-speed/profile.ini index e9e287804e..a5b46ddc94 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/high-speed/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/high-speed/profile.ini @@ -1,4 +1,4 @@ [info] name = High speed order = 1 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/ABS_high-speed_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/medium-quality/profile.ini index 5089d0b3cb..289944f5d7 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/medium-quality/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/ABS_VP/medium-quality/profile.ini @@ -1,4 +1,4 @@ [info] name = Standard order = 0 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/ABS_medium-quality_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/ABS_medium-quality_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_VP/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_VP/high-quality/profile.ini index 9076201855..bc96e03438 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_VP/high-quality/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_VP/high-quality/profile.ini @@ -1,4 +1,4 @@ [info] name = High detail order = 2 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_VP/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_VP/high-speed/profile.ini index f227a5fad2..e947ccca7f 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_VP/high-speed/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_VP/high-speed/profile.ini @@ -1,4 +1,4 @@ [info] name = High speed order = 1 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_eSUN/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_eSUN/high-quality/profile.ini index 9076201855..bc96e03438 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_eSUN/high-quality/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_eSUN/high-quality/profile.ini @@ -1,4 +1,4 @@ [info] name = High detail order = 2 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_eSUN/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_eSUN/high-speed/profile.ini index f227a5fad2..e947ccca7f 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_eSUN/high-speed/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/HIPS_eSUN/high-speed/profile.ini @@ -1,4 +1,4 @@ [info] name = High speed order = 1 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PC-ABS/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PC-ABS/high-speed/profile.ini deleted file mode 100644 index 05925af8d6..0000000000 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PC-ABS/high-speed/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = High speed -order = 1 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PC-ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PC-ABS/material.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PC-ABS/material.ini deleted file mode 100644 index 7dae4173a0..0000000000 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PC-ABS/material.ini +++ /dev/null @@ -1,8 +0,0 @@ -[info] -name = PC-ABS (Proto-pasta) -material_types = Advanced -order = 57 -description = Bed preparation required: - Apply a PVA-based glue stick - to bed surface before printing. -url = lulzbot.com/store/filament/pc-abs-alloy?pk_campaign=software-cura diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/high-quality/profile.ini index 45dc88d123..ec0debcc4b 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/high-quality/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/high-quality/profile.ini @@ -1,4 +1,4 @@ [info] name = High detail order = 2 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/high-speed/profile.ini index 748343e5d3..3da295971f 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/high-speed/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/high-speed/profile.ini @@ -1,4 +1,4 @@ [info] name = High speed order = 1 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/material.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/material.ini index c461a40afa..bf04fd2877 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/material.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/material.ini @@ -1,5 +1,5 @@ [info] name = PLA (Village Plastics) -material_types = Beginner -order = 2 +material_types = Beginner|First Run +order = 0 url = lulzbot.com/store/filament/pla-village?pk_campaign=software-cura diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/medium-quality/profile.ini index d0c423f11b..7e5459c854 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/medium-quality/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_VP/medium-quality/profile.ini @@ -1,4 +1,4 @@ [info] name = Standard order = 0 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/high-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/high-quality/profile.ini index 45dc88d123..ec0debcc4b 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/high-quality/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/high-quality/profile.ini @@ -1,4 +1,4 @@ [info] name = High detail order = 2 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/high-speed/profile.ini index 748343e5d3..3da295971f 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/high-speed/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/high-speed/profile.ini @@ -1,4 +1,4 @@ [info] name = High speed order = 1 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/material.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/material.ini index df2ae824d5..1f4e59e1ca 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/material.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/material.ini @@ -1,5 +1,5 @@ [info] name = PLA (eSUN) -material_types = Beginner|First Run -order = 0 +material_types = Beginner +order = 1 url = lulzbot.com/store/filament/pla-esun?pk_campaign=software-cura diff --git a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/medium-quality/profile.ini b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/medium-quality/profile.ini index d0c423f11b..7e5459c854 100644 --- a/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/medium-quality/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_6_Single_v2.1/PLA_eSUN/medium-quality/profile.ini @@ -1,4 +1,4 @@ [info] name = Standard order = 0 -profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_mangrove_single-extruder_0.5noz_cura.ini +profile_file = ../../../lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_nutmeg_single-extruder_0.5noz_cura.ini diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-quality_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-quality_nutmeg_single-extruder_0.5noz_cura.ini index bda735cf55..9bc7ed36c7 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-quality_mangrove_single-extruder_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-quality_nutmeg_single-extruder_0.5noz_cura.ini @@ -7,7 +7,7 @@ fill_density = 20 perimeter_before_infill = True nozzle_size = 0.5 print_speed = 50 -print_temperature = 250 +print_temperature = 240 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -47,9 +47,9 @@ fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 40 -fan_speed_max = 60 +fan_full_height = 6 +fan_speed = 20 +fan_speed_max = 40 cool_min_feedrate = 10 cool_head_lift = False solid_top = True @@ -88,20 +88,30 @@ simplemodematerial = 1_pla simplemodematerialtype = Beginner [alterations] -start.gcode = G21 +start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer + ;Basic slice data: + ;Sliced at: {day} {date} {time} + ;Layer height: {layer_height} + ;Walls: {wall_thickness} + ;Fill: {fill_density} + ;Estimated Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + G26 ; clear potential 'probe fail' condition + G21 ; set units to Millimetres M107 ; disable fans - G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode - M107 ; start with the fan off G92 E0 ; set extruder position to 0 M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S150 ; set to cleaning temp and wait + G28 XY ; home X and Y + G1 X-19 Y258 F1000 ; move to safe homing position + M109 S170 ; soften filament for z homing + G28 Z ; home Z + M104 S170 ; cool to probing temp during wipe G1 E-30 F100 ; suck up XXmm of filament - M109 S170 ; heat to probe temp G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z2 ; Push nozzle into wiper + G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe G1 X-17 Y90 F1000 ; slow wipe G1 X-17 Y85 F1000 ; slow wipe @@ -126,31 +136,36 @@ start.gcode = G21 G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - G1 Y10 ; move above probe - M109 S170 ; set to probing temp + M109 S170 ; heat to probe temp + G1 X-11 Y-8 ; move above probe M204 S100 ; set accel for probing - G29 ; Probe - M204 S700 ; set accel back to normal + G29 ; probe sequence (for auto-leveling) + M204 S500 ; set accel back to normal G1 X0 Y0 Z15 F5000 ; get out the way M400 ; clear buffer G4 S1 ; pause + M117 Heating... ; LCD status message + M140 S{print_bed_temperature}; get bed heating up M109 S{print_temperature} ; set extruder temp and wait - G4 S25 ; wait for bed to temp up + M190 S{print_bed_temperature}; get bed temping up during first layer G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer - M117 Taz Printing... ; Message -end.gcode = M400 + M117 TAZ Printing... ; LCD status message +end.gcode = ; + M400 ; wait for moves to finish M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) M107 ; fans off G91 ; relative positioning G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + M117 Cooling please wait ; progress indicator message G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position + G1 Y0 F3000 ; move to cooling position + M190 S50 ; set bed to cool off + G1 Y280 F3000 ; present finished print M84 ; steppers off G90 ; absolute positioning - M117 TAZ 6 Ready. ;{profile_string} + M117 Print complete ; progress indicator message + ;{profile_string} start2.gcode = ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-speed_nutmeg_single-extruder_0.5noz_cura.ini index 64e3caca42..586c991a3a 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_high-speed_nutmeg_single-extruder_0.5noz_cura.ini @@ -2,12 +2,12 @@ layer_height = 0.38 wall_thickness = 1.0 retraction_enable = True -solid_layer_thickness = 1.04 -fill_density = 20 +solid_layer_thickness = 1 +fill_density = 40 perimeter_before_infill = True nozzle_size = 0.5 print_speed = 50 -print_temperature = 250 +print_temperature = 240 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -47,9 +47,9 @@ fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 40 -fan_speed_max = 60 +fan_full_height = 6 +fan_speed = 3 +fan_speed_max = 50 cool_min_feedrate = 10 cool_head_lift = False solid_top = True @@ -88,20 +88,30 @@ simplemodematerial = 1_pla simplemodematerialtype = Beginner [alterations] -start.gcode = G21 +start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer + ;Basic slice data: + ;Sliced at: {day} {date} {time} + ;Layer height: {layer_height} + ;Walls: {wall_thickness} + ;Fill: {fill_density} + ;Estimated Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + G26 ; clear potential 'probe fail' condition + G21 ; set units to Millimetres M107 ; disable fans - G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode - M107 ; start with the fan off G92 E0 ; set extruder position to 0 M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S150 ; set to cleaning temp and wait + G28 XY ; home X and Y + G1 X-19 Y258 F1000 ; move to safe homing position + M109 S170 ; soften filament for z homing + G28 Z ; home Z + M104 S170 ; cool to probing temp during wipe G1 E-30 F100 ; suck up XXmm of filament - M109 S170 ; heat to probe temp G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z2 ; Push nozzle into wiper + G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe G1 X-17 Y90 F1000 ; slow wipe G1 X-17 Y85 F1000 ; slow wipe @@ -126,31 +136,35 @@ start.gcode = G21 G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - G1 Y10 ; move above probe - M109 S170 ; set to probing temp + M109 S170 ; heat to probe temp + G1 X-11 Y-8 ; move above probe M204 S100 ; set accel for probing - G29 ; Probe - M204 S700 ; set accel back to normal + G29 ; probe sequence (for auto-leveling) + M204 S500 ; set accel back to normal G1 X0 Y0 Z15 F5000 ; get out the way M400 ; clear buffer G4 S1 ; pause + M117 Heating... ; LCD status message + M140 S{print_bed_temperature}; get bed heating up M109 S{print_temperature} ; set extruder temp and wait - G4 S25 ; wait for bed to temp up + M190 S{print_bed_temperature}; get bed temping up during first layer G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer - M117 Taz Printing... ; Message -end.gcode = M400 + M117 TAZ Printing... ; LCD status message +end.gcode = ; + M400 ; wait for moves to finish M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) M107 ; fans off G91 ; relative positioning G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + M117 Cooling please wait ; progress indicator message G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position + G1 Y0 F3000 ; move to cooling position + M190 S50 ; set bed to cool off + G1 Y280 F3000 ; present finished print M84 ; steppers off G90 ; absolute positioning - M117 TAZ 6 Ready. + M117 Print complete ; progress indicator message ;{profile_string} start2.gcode = ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_medium-quality_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_medium-quality_nutmeg_single-extruder_0.5noz_cura.ini index 9f29064906..2a85f91fbe 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_medium-quality_mangrove_single-extruder_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/ABS_medium-quality_nutmeg_single-extruder_0.5noz_cura.ini @@ -47,7 +47,7 @@ fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 -fan_full_height = 0.5 +fan_full_height = 6 fan_speed = 40 fan_speed_max = 60 cool_min_feedrate = 10 @@ -88,20 +88,30 @@ simplemodematerial = 1_pla simplemodematerialtype = Beginner [alterations] -start.gcode = G21 +start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer + ;Basic slice data: + ;Sliced at: {day} {date} {time} + ;Layer height: {layer_height} + ;Walls: {wall_thickness} + ;Fill: {fill_density} + ;Estimated Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + G26 ; clear potential 'probe fail' condition + G21 ; set units to Millimetres M107 ; disable fans - G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode - M107 ; start with the fan off G92 E0 ; set extruder position to 0 M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S150 ; set to cleaning temp and wait + G28 XY ; home X and Y + G1 X-19 Y258 F1000 ; move to safe homing position + M109 S170 ; soften filament for z homing + G28 Z ; home Z + M104 S170 ; cool to probing temp during wipe G1 E-30 F100 ; suck up XXmm of filament - M109 S170 ; heat to probe temp G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z2 ; Push nozzle into wiper + G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe G1 X-17 Y90 F1000 ; slow wipe G1 X-17 Y85 F1000 ; slow wipe @@ -126,31 +136,36 @@ start.gcode = G21 G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - G1 Y10 ; move above probe - M109 S170 ; set to probing temp + M109 S170 ; heat to probe temp + G1 X-11 Y-8 ; move above probe M204 S100 ; set accel for probing - G29 ; Probe - M204 S700 ; set accel back to normal + G29 ; probe sequence (for auto-leveling) + M204 S500 ; set accel back to normal G1 X0 Y0 Z15 F5000 ; get out the way M400 ; clear buffer G4 S1 ; pause + M117 Heating... ; LCD status message + M140 S{print_bed_temperature}; get bed heating up M109 S{print_temperature} ; set extruder temp and wait - G4 S25 ; wait for bed to temp up + M190 S{print_bed_temperature}; get bed temping up during first layer G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer - M117 Taz Printing... ; Message -end.gcode = M400 + M117 TAZ Printing... ; LCD status message +end.gcode = ; + M400 ; wait for moves to finish M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) M107 ; fans off G91 ; relative positioning G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + M117 Cooling please wait ; progress indicator message G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position + G1 Y0 F3000 ; move to cooling position + M190 S50 ; set bed to cool off + G1 Y280 F3000 ; present finished print M84 ; steppers off G90 ; absolute positioning - M117 TAZ 6 Ready. ;{profile_string} + M117 Print complete ; progress indicator message + ;{profile_string} start2.gcode = ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_nutmeg_single-extruder_0.5noz_cura.ini index 3fb5b1f185..825495e308 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_mangrove_single-extruder_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-quality_nutmeg_single-extruder_0.5noz_cura.ini @@ -7,7 +7,7 @@ fill_density = 20 perimeter_before_infill = True nozzle_size = 0.5 print_speed = 50 -print_temperature = 250 +print_temperature = 240 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -42,14 +42,14 @@ infill_speed = 30 solidarea_speed = 45 inset0_speed = 20 insetx_speed = 25 -cool_min_layer_time = 20 +cool_min_layer_time = 10 fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 40 -fan_speed_max = 50 +fan_full_height = 6 +fan_speed = 20 +fan_speed_max = 40 cool_min_feedrate = 10 cool_head_lift = False solid_top = True @@ -88,20 +88,30 @@ simplemodematerial = 1_pla simplemodematerialtype = Beginner [alterations] -start.gcode = G21 +start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer + ;Basic slice data: + ;Sliced at: {day} {date} {time} + ;Layer height: {layer_height} + ;Walls: {wall_thickness} + ;Fill: {fill_density} + ;Estimated Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + G26 ; clear potential 'probe fail' condition + G21 ; set units to Millimetres M107 ; disable fans - G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode - M107 ; start with the fan off G92 E0 ; set extruder position to 0 M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S150 ; set to cleaning temp and wait + G28 XY ; home X and Y + G1 X-19 Y258 F1000 ; move to safe homing position + M109 S170 ; soften filament for z homing + G28 Z ; home Z + M104 S170 ; cool to probing temp during wipe G1 E-30 F100 ; suck up XXmm of filament - M109 S170 ; heat to probe temp G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z2 ; Push nozzle into wiper + G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe G1 X-17 Y90 F1000 ; slow wipe G1 X-17 Y85 F1000 ; slow wipe @@ -126,31 +136,36 @@ start.gcode = G21 G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - G1 Y10 ; move above probe - M109 S170 ; set to probing temp + M109 S170 ; heat to probe temp + G1 X-11 Y-8 ; move above probe M204 S100 ; set accel for probing - G29 ; Probe - M204 S700 ; set accel back to normal + G29 ; probe sequence (for auto-leveling) + M204 S500 ; set accel back to normal G1 X0 Y0 Z15 F5000 ; get out the way M400 ; clear buffer G4 S1 ; pause + M117 Heating... ; LCD status message + M140 S{print_bed_temperature}; get bed heating up M109 S{print_temperature} ; set extruder temp and wait - G4 S25 ; wait for bed to temp up + M190 S{print_bed_temperature}; get bed temping up during first layer G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer - M117 Taz Printing... ; Message -end.gcode = M400 + M117 TAZ Printing... ; LCD status message +end.gcode = ; + M400 ; wait for moves to finish M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) M107 ; fans off G91 ; relative positioning G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + M117 Cooling please wait ; progress indicator message G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position + G1 Y0 F3000 ; move to cooling position + M190 S50 ; set bed to cool off + G1 Y280 F3000 ; present finished print M84 ; steppers off G90 ; absolute positioning - M117 TAZ 6 Ready. ;{profile_string} + M117 Print complete ; progress indicator message + ;{profile_string} start2.gcode = ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_nutmeg_single-extruder_0.5noz_cura.ini index 7474168ed5..c6129c40e5 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_mangrove_single-extruder_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_high-speed_nutmeg_single-extruder_0.5noz_cura.ini @@ -7,7 +7,7 @@ fill_density = 20 perimeter_before_infill = True nozzle_size = 0.5 print_speed = 50 -print_temperature = 250 +print_temperature = 240 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -47,7 +47,7 @@ fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 -fan_full_height = 0.5 +fan_full_height = 6 fan_speed = 40 fan_speed_max = 50 cool_min_feedrate = 10 @@ -88,20 +88,30 @@ simplemodematerial = 1_pla simplemodematerialtype = Beginner [alterations] -start.gcode = G21 +start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer + ;Basic slice data: + ;Sliced at: {day} {date} {time} + ;Layer height: {layer_height} + ;Walls: {wall_thickness} + ;Fill: {fill_density} + ;Estimated Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + G26 ; clear potential 'probe fail' condition + G21 ; set units to Millimetres M107 ; disable fans - G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode - M107 ; start with the fan off G92 E0 ; set extruder position to 0 M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S150 ; set to cleaning temp and wait + G28 XY ; home X and Y + G1 X-19 Y258 F1000 ; move to safe homing position + M109 S170 ; soften filament for z homing + G28 Z ; home Z + M104 S170 ; cool to probing temp during wipe G1 E-30 F100 ; suck up XXmm of filament - M109 S170 ; heat to probe temp G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z2 ; Push nozzle into wiper + G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe G1 X-17 Y90 F1000 ; slow wipe G1 X-17 Y85 F1000 ; slow wipe @@ -126,31 +136,36 @@ start.gcode = G21 G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - G1 Y10 ; move above probe - M109 S170 ; set to probing temp + M109 S170 ; heat to probe temp + G1 X-11 Y-8 ; move above probe M204 S100 ; set accel for probing - G29 ; Probe - M204 S700 ; set accel back to normal + G29 ; probe sequence (for auto-leveling) + M204 S500 ; set accel back to normal G1 X0 Y0 Z15 F5000 ; get out the way M400 ; clear buffer G4 S1 ; pause + M117 Heating... ; LCD status message + M140 S{print_bed_temperature}; get bed heating up M109 S{print_temperature} ; set extruder temp and wait - G4 S25 ; wait for bed to temp up + M190 S{print_bed_temperature}; get bed temping up during first layer G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer - M117 Taz Printing... ; Message -end.gcode = M400 + M117 TAZ Printing... ; LCD status message +end.gcode = ; + M400 ; wait for moves to finish M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) M107 ; fans off G91 ; relative positioning G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + M117 Cooling please wait ; progress indicator message G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position + G1 Y0 F3000 ; move to cooling position + M190 S50 ; set bed to cool off + G1 Y280 F3000 ; present finished print M84 ; steppers off G90 ; absolute positioning - M117 TAZ 6 Ready. ;{profile_string} + M117 Print complete ; progress indicator message + ;{profile_string} start2.gcode = ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_medium-speed_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_medium-speed_nutmeg_single-extruder_0.5noz_cura.ini index 50505cb36c..14c55e0586 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_medium-speed_mangrove_single-extruder_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/HIPS_medium-speed_nutmeg_single-extruder_0.5noz_cura.ini @@ -7,7 +7,7 @@ fill_density = 20 perimeter_before_infill = True nozzle_size = 0.5 print_speed = 50 -print_temperature = 250 +print_temperature = 240 print_temperature2 = 0 print_temperature3 = 0 print_temperature4 = 0 @@ -42,14 +42,14 @@ infill_speed = 50 solidarea_speed = 45 inset0_speed = 30 insetx_speed = 35 -cool_min_layer_time = 20 +cool_min_layer_time = 15 fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 40 -fan_speed_max = 50 +fan_full_height = 6 +fan_speed = 20 +fan_speed_max = 40 cool_min_feedrate = 10 cool_head_lift = False solid_top = True @@ -88,20 +88,30 @@ simplemodematerial = 1_pla simplemodematerialtype = Beginner [alterations] -start.gcode = G21 +start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer + ;Basic slice data: + ;Sliced at: {day} {date} {time} + ;Layer height: {layer_height} + ;Walls: {wall_thickness} + ;Fill: {fill_density} + ;Estimated Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + G26 ; clear potential 'probe fail' condition + G21 ; set units to Millimetres M107 ; disable fans - G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode - M107 ; start with the fan off G92 E0 ; set extruder position to 0 M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S150 ; set to cleaning temp and wait + G28 XY ; home X and Y + G1 X-19 Y258 F1000 ; move to safe homing position + M109 S170 ; soften filament for z homing + G28 Z ; home Z + M104 S170 ; cool to probing temp during wipe G1 E-30 F100 ; suck up XXmm of filament - M109 S170 ; heat to probe temp G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z2 ; Push nozzle into wiper + G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe G1 X-17 Y90 F1000 ; slow wipe G1 X-17 Y85 F1000 ; slow wipe @@ -126,31 +136,36 @@ start.gcode = G21 G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - G1 Y10 ; move above probe - M109 S170 ; set to probing temp + M109 S170 ; heat to probe temp + G1 X-11 Y-8 ; move above probe M204 S100 ; set accel for probing - G29 ; Probe - M204 S700 ; set accel back to normal + G29 ; probe sequence (for auto-leveling) + M204 S500 ; set accel back to normal G1 X0 Y0 Z15 F5000 ; get out the way M400 ; clear buffer G4 S1 ; pause + M117 Heating... ; LCD status message + M140 S{print_bed_temperature}; get bed heating up M109 S{print_temperature} ; set extruder temp and wait - G4 S25 ; wait for bed to temp up + M190 S{print_bed_temperature}; get bed temping up during first layer G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer - M117 Taz Printing... ; Message -end.gcode = M400 + M117 TAZ Printing... ; LCD status message +end.gcode = ; + M400 ; wait for moves to finish M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) M107 ; fans off G91 ; relative positioning G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + M117 Cooling please wait ; progress indicator message G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position + G1 Y0 F3000 ; move to cooling position + M190 S50 ; set bed to cool off + G1 Y280 F3000 ; present finished print M84 ; steppers off G90 ; absolute positioning - M117 TAZ 6 Ready. ;{profile_string} + M117 Print complete ; progress indicator message + ;{profile_string} start2.gcode = ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PC-ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PC-ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini deleted file mode 100644 index 2f383177d0..0000000000 --- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PC-ABS_high-speed_mangrove_single-extruder_0.5noz_cura.ini +++ /dev/null @@ -1,297 +0,0 @@ -[profile] -layer_height = 0.38 -wall_thickness = 1.0 -retraction_enable = True -solid_layer_thickness = 1.04 -fill_density = 20 -perimeter_before_infill = True -nozzle_size = 0.5 -print_speed = 50 -print_temperature = 270 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_temperature5 = 0 -print_bed_temperature = 115 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_diameter5 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = All -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.425 -layer0_width_factor = 125 -object_sink = 0.0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 15 -infill_speed = 55 -solidarea_speed = 45 -inset0_speed = 45 -insetx_speed = 50 -cool_min_layer_time = 15 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 40 -fan_speed_max = 60 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0.7 -support_z_distance = 0.05 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap_all = 0.0 -raft_airgap = 0.5 -raft_surface_layers = 2 -raft_surface_thickness = 0.27 -raft_surface_linewidth = 0.4 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 -simplemodesettings = -simplemodeprofile = 2_normal -simplemodematerial = 1_pla -simplemodematerialtype = Beginner - -[alterations] -start.gcode = G21 - M107 ; disable fans - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S150 ; set to cleaning temp and wait - G1 E-30 F100 ; suck up XXmm of filament - M109 S170 ; heat to probe temp - G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z2 ; Push nozzle into wiper - G1 X-17 Y95 F1000 ; slow wipe - G1 X-17 Y90 F1000 ; slow wipe - G1 X-17 Y85 F1000 ; slow wipe - G1 X-15 Y90 F1000 ; slow wipe - G1 X-17 Y80 F1000 ; slow wipe - G1 X-15 Y95 F1000 ; slow wipe - G1 X-17 Y75 F2000 ; fast wipe - G1 X-15 Y65 F2000 ; fast wipe - G1 X-17 Y70 F2000 ; fast wipe - G1 X-15 Y60 F2000 ; fast wipe - G1 X-17 Y55 F2000 ; fast wipe - G1 X-15 Y50 F2000 ; fast wipe - G1 X-17 Y40 F2000 ; fast wipe - G1 X-15 Y45 F2000 ; fast wipe - G1 X-17 Y35 F2000 ; fast wipe - G1 X-15 Y40 F2000 ; fast wipe - G1 X-17 Y70 F2000 ; fast wipe - G1 X-15 Y30 Z2 F2000 ; fast wipe - G1 X-17 Y35 F2000 ; fast wipe - G1 X-15 Y25 F2000 ; fast wipe - G1 X-17 Y30 F2000 ; fast wipe - G1 X-15 Y25 Z1.5 F1000 ; slow wipe - G1 X-17 Y23 F1000 ; slow wipe - G1 Z10 ; raise extruder - G1 Y10 ; move above probe - M109 S170 ; set to probing temp - M204 S100 ; set accel for probing - G29 ; Probe - M204 S700 ; set accel back to normal - G1 X0 Y0 Z15 F5000 ; get out the way - M400 ; clear buffer - G4 S1 ; pause - M109 S{print_temperature} ; set extruder temp and wait - G4 S25 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer - M117 Taz Printing... ; Message -end.gcode = M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G91 ; relative positioning - G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more - G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position - M84 ; steppers off - G90 ; absolute positioning - M117 TAZ 6 Ready. - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_nutmeg_single-extruder_0.5noz_cura.ini index 23bdc1d64e..68d7fecabc 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_mangrove_single-extruder_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-quality_nutmeg_single-extruder_0.5noz_cura.ini @@ -47,8 +47,8 @@ fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 75 +fan_full_height = 6 +fan_speed = 80 fan_speed_max = 100 cool_min_feedrate = 10 cool_head_lift = False @@ -87,20 +87,30 @@ simplemodematerial = 1_pla simplemodematerialtype = Beginner [alterations] -start.gcode = G21 +start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer + ;Basic slice data: + ;Sliced at: {day} {date} {time} + ;Layer height: {layer_height} + ;Walls: {wall_thickness} + ;Fill: {fill_density} + ;Estimated Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + G26 ; clear potential 'probe fail' condition + G21 ; set units to Millimetres M107 ; disable fans - G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode - M107 ; start with the fan off G92 E0 ; set extruder position to 0 M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S130 ; set to cleaning temp and wait + G28 XY ; home X and Y + G1 X-19 Y258 F1000 ; move to safe homing position + M109 S170 ; soften filament for z homing + G28 Z ; home Z + M104 S170 ; cool to probing temp during wipe G1 E-30 F100 ; suck up XXmm of filament - M109 S140 ; heat to probe temp G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z2 ; Push nozzle into wiper + G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe G1 X-17 Y90 F1000 ; slow wipe G1 X-17 Y85 F1000 ; slow wipe @@ -125,31 +135,36 @@ start.gcode = G21 G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - G1 Y10 ; move above probe - M109 S170 ; set to probing temp + M109 S150 ; heat to probe temp + G1 X-11 Y-8 ; move above probe M204 S100 ; set accel for probing - G29 ; Probe - M204 S700 ; set accel back to normal + G29 ; probe sequence (for auto-leveling) + M204 S500 ; set accel back to normal G1 X0 Y0 Z15 F5000 ; get out the way M400 ; clear buffer G4 S1 ; pause + M117 Heating... ; LCD status message + M140 S{print_bed_temperature}; get bed heating up M109 S{print_temperature} ; set extruder temp and wait - G4 S25 ; wait for bed to temp up + M190 S{print_bed_temperature}; get bed temping up during first layer G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer - M117 Taz Printing... ; Message -end.gcode = M400 + M117 TAZ Printing... ; LCD status message +end.gcode = ; + M400 ; wait for moves to finish M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) M107 ; fans off G91 ; relative positioning G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + M117 Cooling please wait ; progress indicator message G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position + G1 Y0 F3000 ; move to cooling position + M190 S50 ; set bed to cool off + G1 Y280 F3000 ; present finished print M84 ; steppers off G90 ; absolute positioning - M117 TAZ 6 Ready. ;{profile_string} + M117 Print complete ; progress indicator message + ;{profile_string} start2.gcode = ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_nutmeg_single-extruder_0.5noz_cura.ini index 78f73af992..73efc8abd1 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_mangrove_single-extruder_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_nutmeg_single-extruder_0.5noz_cura.ini @@ -1,5 +1,5 @@ [profile] -layer_height = 0.22 +layer_height = 0.38 wall_thickness = 1.0 retraction_enable = True solid_layer_thickness = 0.88 @@ -47,8 +47,8 @@ fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 60 +fan_full_height = 6 +fan_speed = 80 fan_speed_max = 100 cool_min_feedrate = 10 cool_head_lift = False @@ -88,19 +88,30 @@ simplemodematerial = 1_pla simplemodematerialtype = Beginner [alterations] -start.gcode = G21 +start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer + ;Basic slice data: + ;Sliced at: {day} {date} {time} + ;Layer height: {layer_height} + ;Walls: {wall_thickness} + ;Fill: {fill_density} + ;Estimated Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + G26 ; clear potential 'probe fail' condition + G21 ; set units to Millimetres M107 ; disable fans - G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode - M107 ; start with the fan off G92 E0 ; set extruder position to 0 M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S130 ; set to cleaning temp and wait + G28 XY ; home X and Y + G1 X-19 Y258 F1000 ; move to safe homing position + M109 S170 ; soften filament for z homing + G28 Z ; home Z + M104 S170 ; cool to probing temp during wipe G1 E-30 F100 ; suck up XXmm of filament G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z2 ; Push nozzle into wiper + G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe G1 X-17 Y90 F1000 ; slow wipe G1 X-17 Y85 F1000 ; slow wipe @@ -124,32 +135,36 @@ start.gcode = G21 G1 X-17 Y30 F2000 ; fast wipe G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe - M109 S140 ; heat to probe temp G1 Z10 ; raise extruder + M109 S150 ; heat to probe temp G1 X-11 Y-8 ; move above probe M204 S100 ; set accel for probing - G29 ; Probe - M204 S700 ; set accel back to normal + G29 ; probe sequence (for auto-leveling) + M204 S500 ; set accel back to normal G1 X0 Y0 Z15 F5000 ; get out the way M400 ; clear buffer G4 S1 ; pause + M117 Heating... ; LCD status message + M140 S{print_bed_temperature}; get bed heating up M109 S{print_temperature} ; set extruder temp and wait - G4 S25 ; wait for bed to temp up + M190 S{print_bed_temperature}; get bed temping up during first layer G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer - M117 Taz Printing... ; Message -end.gcode = M400 + M117 TAZ Printing... ; LCD status message +end.gcode = ; + M400 ; wait for moves to finish M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) M107 ; fans off G91 ; relative positioning G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + M117 Cooling please wait ; progress indicator message G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position + G1 Y0 F3000 ; move to cooling position + M190 S50 ; set bed to cool off + G1 Y280 F3000 ; present finished print M84 ; steppers off G90 ; absolute positioning - M117 TAZ 6 Ready. + M117 Print complete ; progress indicator message ;{profile_string} start2.gcode = ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_mangrove_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_nutmeg_single-extruder_0.5noz_cura.ini index 728af6c89d..2c169ffc1b 100644 --- a/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_high-speed_mangrove_single-extruder_0.5noz_cura.ini +++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_v2.1/PLA_medium-quality_nutmeg_single-extruder_0.5noz_cura.ini @@ -1,8 +1,8 @@ [profile] -layer_height = 0.38 +layer_height = 0.25 wall_thickness = 1.0 retraction_enable = True -solid_layer_thickness = 0.88 +solid_layer_thickness = 0.75 fill_density = 20 perimeter_before_infill = True nozzle_size = 0.5 @@ -38,18 +38,18 @@ object_sink = 0.0 overlap_dual = 0.15 travel_speed = 175 bottom_layer_speed = 15 -infill_speed = 55 -solidarea_speed = 45 -inset0_speed = 45 -insetx_speed = 50 -cool_min_layer_time = 15 +infill_speed = 50 +solidarea_speed = 40 +inset0_speed = 40 +insetx_speed = 45 +cool_min_layer_time = 10 fan_enabled = True skirt_line_count = 1 skirt_gap = 3.0 skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 40 -fan_speed_max = 60 +fan_full_height = 6 +fan_speed = 80 +fan_speed_max = 100 cool_min_feedrate = 10 cool_head_lift = False solid_top = True @@ -88,20 +88,30 @@ simplemodematerial = 1_pla simplemodematerialtype = Beginner [alterations] -start.gcode = G21 +start.gcode = ;This profile is designed specifically for LulzBot Nutmeg 3D Printer + ;Basic slice data: + ;Sliced at: {day} {date} {time} + ;Layer height: {layer_height} + ;Walls: {wall_thickness} + ;Fill: {fill_density} + ;Estimated Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + G26 ; clear potential 'probe fail' condition + G21 ; set units to Millimetres M107 ; disable fans - G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode - M107 ; start with the fan off G92 E0 ; set extruder position to 0 M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S130 ; set to cleaning temp and wait + G28 XY ; home X and Y + G1 X-19 Y258 F1000 ; move to safe homing position + M109 S170 ; soften filament for z homing + G28 Z ; home Z + M104 S170 ; cool to probing temp during wipe G1 E-30 F100 ; suck up XXmm of filament - M109 S140 ; heat to probe temp G1 X-15 Y100 F3000 ; move above wiper pad - G1 Z2 ; Push nozzle into wiper + G1 Z1 ; push nozzle into wiper G1 X-17 Y95 F1000 ; slow wipe G1 X-17 Y90 F1000 ; slow wipe G1 X-17 Y85 F1000 ; slow wipe @@ -126,31 +136,35 @@ start.gcode = G21 G1 X-15 Y25 Z1.5 F1000 ; slow wipe G1 X-17 Y23 F1000 ; slow wipe G1 Z10 ; raise extruder - G1 Y10 ; move above probe - M109 S170 ; set to probing temp + M109 S150 ; heat to probe temp + G1 X-11 Y-8 ; move above probe M204 S100 ; set accel for probing - G29 ; Probe - M204 S700 ; set accel back to normal + G29 ; probe sequence (for auto-leveling) + M204 S500 ; set accel back to normal G1 X0 Y0 Z15 F5000 ; get out the way M400 ; clear buffer G4 S1 ; pause + M117 Heating... ; LCD status message + M140 S{print_bed_temperature}; get bed heating up M109 S{print_temperature} ; set extruder temp and wait - G4 S25 ; wait for bed to temp up + M190 S{print_bed_temperature}; get bed temping up during first layer G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer - M117 Taz Printing... ; Message -end.gcode = M400 + M117 TAZ Printing... ; LCD status message +end.gcode = ; + M400 ; wait for moves to finish M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) M107 ; fans off G91 ; relative positioning G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G1 Z+20 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + M117 Cooling please wait ; progress indicator message G90 ; absolute positioning - G1 X0 Y250 ; move to cooling position + G1 Y0 F3000 ; move to cooling position + M190 S50 ; set bed to cool off + G1 Y280 F3000 ; present finished print M84 ; steppers off G90 ; absolute positioning - M117 TAZ 6 Ready. + M117 Print complete ; progress indicator message ;{profile_string} start2.gcode = ;Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} |