raft interface line spacing can follow default

This is a non critical setting, just follow the default defined in fdmprinter. PP-243

68 files changed, 0 insertions, 68 deletions

diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json
index fed2a698c2..71115ad0e8 100644
--- a/resources/definitions/ultimaker3.def.json
+++ b/resources/definitions/ultimaker3.def.json
@@ -113,7 +113,6 @@
         "prime_tower_enable": { "default_value": true },
         "raft_airgap": { "value": "0" },
         "raft_base_thickness": { "value": "0.3" },
-        "raft_interface_line_spacing": { "value": "0.5" },
         "retraction_amount": { "value": "6.5" },
         "retraction_hop": { "value": "2" },
         "retraction_hop_enabled": { "value": "extruders_enabled_count > 1"  },
diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json
index 1fd21fa658..f80291fc00 100644
--- a/resources/definitions/ultimaker_s3.def.json
+++ b/resources/definitions/ultimaker_s3.def.json
@@ -103,7 +103,6 @@
         "raft_airgap": { "value": "0" },
         "raft_base_speed": { "value": "20" },
         "raft_base_thickness": { "value": "0.3" },
-        "raft_interface_line_spacing": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_speed": { "value": "25" },
         "retraction_amount": { "value": "6.5" },
diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json
index 2693c81862..09543568b9 100644
--- a/resources/definitions/ultimaker_s5.def.json
+++ b/resources/definitions/ultimaker_s5.def.json
@@ -104,7 +104,6 @@
         "raft_airgap": { "value": "0" },
         "raft_base_speed": { "value": "20" },
         "raft_base_thickness": { "value": "0.3" },
-        "raft_interface_line_spacing": { "value": "0.5" },
         "raft_interface_speed": { "value": "20" },
         "raft_speed": { "value": "25" },
         "retraction_amount": { "value": "6.5" },
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
index 768334075b..28a60bdabd 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
index 61ef64c231..d4ba8cbc4f 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
index 06aa4d8996..462c13f2b6 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg
@@ -24,7 +24,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =round(speed_print * 30 / 50)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
index 613a9c0974..f3f61d17c0 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg
@@ -24,7 +24,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
 speed_print = 35
 speed_topbottom = =math.ceil(speed_print * 20 / 35)
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
index 44fa2e5a6b..123db75b7d 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg
@@ -22,7 +22,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
index 078bd7ad3d..4bdb53b532 100644
--- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg
@@ -22,7 +22,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
index 888aa584d9..8c3d040554 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg
@@ -22,7 +22,6 @@ infill_sparse_density = 25
 layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
index a9f2405a58..7f2cbd993d 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg
@@ -22,7 +22,6 @@ infill_sparse_density = 25
 layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
index 1d0f09aa61..5a8831ca19 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
index 646c8bcb36..01e30a734e 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_travel = 150
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
index 6800264142..09f2bdac78 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
index c5bd35c41b..16159bb05c 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
index a0807b6901..08530aeb53 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg
@@ -21,7 +21,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
index 9b15d44b17..21bf142c06 100644
--- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg
@@ -21,7 +21,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 retraction_hop_enabled = 0.2
 speed_layer_0 = =round(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
index 15ff99f287..7d9b88d59d 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg
@@ -24,7 +24,6 @@ layer_0_z_overlap = 0.2
 raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
index 1ffc1f2401..18a7dbb0b7 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg
@@ -24,7 +24,6 @@ layer_0_z_overlap = 0.2
 raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
index 55b4dcb902..421a8149fa 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.3
 raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
index 99d7cae43b..ea50a99995 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.3
 raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
index 1f140e2c96..b262e44985 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
index e381437043..2245c61bad 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
index 5c6277b7ec..f8fc439c83 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg
@@ -22,7 +22,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
index 20ed9ce87a..ebe3c3009e 100644
--- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg
@@ -22,7 +22,6 @@ infill_sparse_density = 40
 layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
index e1017c2a1e..868903bf8e 100644
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
@@ -22,7 +22,6 @@ infill_sparse_density = 10
 layer_0_z_overlap = 0.1
 raft_airgap = 0.2
 raft_base_line_spacing = 1
-raft_interface_line_spacing = 1
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
index 51a4c06695..b8c972ab0c 100644
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
@@ -21,7 +21,6 @@ cool_min_speed = 15
 infill_sparse_density = 10
 raft_base_line_spacing = 2
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
index 618056a2a6..3de26a017d 100644
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.12
 raft_airgap = 0.24
 raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6
-raft_interface_line_spacing = 1.2
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
index 0835413f1c..961f0cb7fb 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_draft.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 25)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
index 495c1fa968..10047c86a4 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.4_normal.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 15 / 35)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
index f693e5646a..7fb45d8cdf 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_draft.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =round(speed_print * 30 / 50)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
index 159dfa0357..6e344ec8c2 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.6_normal.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_combing_max_distance = 50
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 35)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
index 3fcedc20ae..a62dcf4a72 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_draft.inst.cfg
@@ -21,7 +21,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 25)
 speed_print = 25
 speed_topbottom = =math.ceil(speed_print * 20 / 25)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
index 010cd2928d..0b6252c814 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_cpep_0.8_normal.inst.cfg
@@ -21,7 +21,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.22
 raft_airgap = 0.37
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 speed_topbottom = =math.ceil(speed_print * 20 / 30)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
index 53384b766e..e2ab6201f2 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_high.inst.cfg
@@ -21,7 +21,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
index 44d4769992..dc27139f54 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.25_normal.inst.cfg
@@ -21,7 +21,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.1
 raft_airgap = 0.15
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
index a484ba7906..743de67677 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_fast.inst.cfg
@@ -21,7 +21,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
index 96efa8f9df..ddd24ec068 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.4_normal.inst.cfg
@@ -21,7 +21,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.57
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
index 46df73097d..740e867a90 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_fast.inst.cfg
@@ -21,7 +21,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_hop_enabled = 0.2
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
index d3099dca96..2f39be7540 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.6_normal.inst.cfg
@@ -21,7 +21,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.44
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 retraction_hop_enabled = 0.2
 retraction_prime_speed = =retraction_speed
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
index a92540fb6b..5247f03bcb 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_draft.inst.cfg
@@ -20,7 +20,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
index 463ce7ebe4..a836d6ef46 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_nylon_0.8_normal.inst.cfg
@@ -20,7 +20,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.25
 raft_airgap = 0.44
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 retraction_hop_enabled = 0.2
 speed_layer_0 = =round(speed_print * 30 / 55)
 speed_print = 55
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
index f1c20e86d3..703ba79dc2 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_high.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.2
 raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
index 2400aa58f1..6effa96447 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.25_normal.inst.cfg
@@ -23,7 +23,6 @@ layer_0_z_overlap = 0.2
 raft_airgap = 0.25
 raft_base_line_spacing = 1
 raft_base_line_width = 0.5
-raft_interface_line_spacing = 0.7
 speed_layer_0 = =round(speed_print * 30 / 30)
 speed_print = 30
 support_enable = True
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
index b7260de2bf..0d2e6675fc 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_fast.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.3
 raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
index 98ac52a3c9..895db0800f 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.4_normal.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.3
 raft_airgap = 0.35
 raft_base_line_spacing = 1.6
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 speed_layer_0 = =round(speed_print * 30 / 45)
 speed_print = 45
 speed_wall_0 = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
index afb54f4ec5..2bfe529930 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_fast.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
index 000118d151..6c0c6e6ac6 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.6_normal.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.22
 raft_airgap = 0.52
 raft_base_line_spacing = 2.4
 raft_base_line_width = 1.2
-raft_interface_line_spacing = 1.4
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 20 / 45)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
index 511654d090..2683afb725 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pc_0.8_normal.inst.cfg
@@ -21,7 +21,6 @@ infill_sparse_density = 20
 layer_0_z_overlap = 0.22
 raft_airgap = 0.47
 raft_base_line_width = 1.6
-raft_interface_line_spacing = 1.8
 speed_layer_0 = =round(speed_print * 30 / 40)
 speed_print = 40
 support_angle = 45
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
index d4c41bde85..1c6349f006 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
@@ -22,7 +22,6 @@ infill_sparse_density = 10
 layer_0_z_overlap = 0.1
 raft_airgap = 0.2
 raft_base_line_spacing = 1
-raft_interface_line_spacing = 1
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
index c0b340b139..7c213b90ad 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
@@ -21,7 +21,6 @@ cool_min_speed = 15
 infill_sparse_density = 10
 raft_base_line_spacing = 2
 raft_base_line_width = 0.8
-raft_interface_line_spacing = 1
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
index 53f0c748ce..657212e8da 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
@@ -22,7 +22,6 @@ layer_0_z_overlap = 0.12
 raft_airgap = 0.24
 raft_base_line_spacing = 1.2
 raft_base_line_width = 0.6
-raft_interface_line_spacing = 1.2
 retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
diff --git a/resources/variants/ultimaker3_aa0.25.inst.cfg b/resources/variants/ultimaker3_aa0.25.inst.cfg
index 8feff83425..1e216b134b 100644
--- a/resources/variants/ultimaker3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_aa0.25.inst.cfg
@@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker3_aa04.inst.cfg b/resources/variants/ultimaker3_aa04.inst.cfg
index 17b57ddde8..97749bd3c7 100644
--- a/resources/variants/ultimaker3_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_aa04.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg
index 8c382cba04..b0b77ee893 100644
--- a/resources/variants/ultimaker3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_bb0.8.inst.cfg
@@ -35,7 +35,6 @@ raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
diff --git a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
index a4f49c4999..03333a181f 100644
--- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg
@@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker3_extended_aa04.inst.cfg b/resources/variants/ultimaker3_extended_aa04.inst.cfg
index 5b260fa44e..32ca061513 100644
--- a/resources/variants/ultimaker3_extended_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
index 9b3ec32374..5f72d8f019 100644
--- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
@@ -35,7 +35,6 @@ raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
diff --git a/resources/variants/ultimaker_s3_aa0.25.inst.cfg b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
index d40d7cca64..71138ffe7b 100644
--- a/resources/variants/ultimaker_s3_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa0.25.inst.cfg
@@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s3_aa04.inst.cfg b/resources/variants/ultimaker_s3_aa04.inst.cfg
index 95b5108ff6..f26ca1f2b5 100644
--- a/resources/variants/ultimaker_s3_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa04.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
index 2f78121860..f93e995241 100644
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@@ -34,7 +34,6 @@ raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
diff --git a/resources/variants/ultimaker_s3_cc04.inst.cfg b/resources/variants/ultimaker_s3_cc04.inst.cfg
index bbb7f2fd58..de8146e489 100644
--- a/resources/variants/ultimaker_s3_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc04.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_size = 0.4
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s3_cc06.inst.cfg b/resources/variants/ultimaker_s3_cc06.inst.cfg
index d389783b67..f705717b1c 100644
--- a/resources/variants/ultimaker_s3_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc06.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_size = 0.6
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s5_aa0.25.inst.cfg b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
index fc45000058..cfec7db50c 100644
--- a/resources/variants/ultimaker_s5_aa0.25.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa0.25.inst.cfg
@@ -20,7 +20,6 @@ material_final_print_temperature = =material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 5
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = 0.7
 retraction_prime_speed = =retraction_speed
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s5_aa04.inst.cfg b/resources/variants/ultimaker_s5_aa04.inst.cfg
index 318c1b40b4..6ccec2417d 100644
--- a/resources/variants/ultimaker_s5_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_tip_outer_diameter = 1.0
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
 skin_overlap = 15
diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
index 93ca449ac1..a4d317bde1 100644
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@@ -34,7 +34,6 @@ raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_base_speed = 20
 raft_base_thickness = 0.3
-raft_interface_line_spacing = 0.5
 raft_interface_speed = 20
 raft_speed = 25
 raft_surface_layers = 1
diff --git a/resources/variants/ultimaker_s5_cc04.inst.cfg b/resources/variants/ultimaker_s5_cc04.inst.cfg
index c67cad4cb6..ea803e74ed 100644
--- a/resources/variants/ultimaker_s5_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc04.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_size = 0.4
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg
index bccde4f56e..d52371338f 100644
--- a/resources/variants/ultimaker_s5_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@@ -16,7 +16,6 @@ machine_nozzle_size = 0.6
 raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 raft_base_thickness = =resolveOrValue('layer_height_0') * 1.2
-raft_interface_line_spacing = =raft_interface_line_width + 0.2
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
 speed_infill = =speed_print