set raft acceleration to default

Rafts have only straight lines, no need for modified acceleration. PP-243

36 files changed, 0 insertions, 36 deletions

diff --git a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg
index c168b5f6af..93f8d98598 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ cool_min_speed = 12
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 retraction_min_travel = 5
 skin_overlap = 50
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg
index 71bd64f70e..34ff30d4e5 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -19,7 +19,6 @@ material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg
index 04ebcac344..36c0dbbf2f 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -19,7 +19,6 @@ material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg
index 19301e522e..9bc7c2ecce 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 15
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg
index d06df68893..c5f92c2515 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 12
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 skin_overlap = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 70)
diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
index 99cdfb95bc..aa9d44f0e0 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -19,7 +19,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 prime_tower_enable = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
index f8e2406052..56432e5af9 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -20,7 +20,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 prime_tower_enable = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg
index b71eab99d6..6e98944441 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -20,7 +20,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 prime_tower_enable = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
index c720f91ec8..4e2114909a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ cool_min_speed = 12
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 retraction_min_travel = 5
 skin_overlap = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
index 28775a27a8..a0c909af75 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -18,7 +18,6 @@ material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
index 56541021e4..58b6f80f5d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -18,7 +18,6 @@ material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
index f96b871988..0dd7ec5a0d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
@@ -17,7 +17,6 @@ cool_min_speed = 15
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
index 7dac76c1c2..8f17f79616 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ cool_min_speed = 12
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
index fa530c7ae8..deed7d6486 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -21,7 +21,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 prime_tower_enable = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
index 096cb81f22..5dfbf6ce6c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -21,7 +21,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 prime_tower_enable = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
index 18c614a7fc..2717be119c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -21,7 +21,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 prime_tower_enable = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg
index a3b2815624..5e4bfd359d 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg
@@ -18,7 +18,6 @@ cool_min_speed = 12
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 retraction_min_travel = 5
 skin_overlap = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
index 98a5043573..f0ced52d33 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -18,7 +18,6 @@ material_print_temperature = =default_material_print_temperature + 10
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
index 3a1ec77384..90fd37a5fb 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -18,7 +18,6 @@ material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
index f49d212766..c6a9e2b017 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@@ -17,7 +17,6 @@ cool_min_speed = 15
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
index 7ff428bed2..0b0ea1fb9f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -17,7 +17,6 @@ cool_min_speed = 12
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 ooze_shield_angle = 40
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0.4
 retraction_prime_speed = =retraction_speed
 skin_overlap = 50
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
index c812fd0bd6..7bd2536fa0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Draft_Print.inst.cfg
@@ -19,7 +19,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 prime_tower_enable = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
index 0a62da070d..4ba546ab06 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Superdraft_Print.inst.cfg
@@ -19,7 +19,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 prime_tower_enable = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
index a38d142352..5466fb4a72 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg
@@ -21,7 +21,6 @@ machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_heat_up_speed = 1.4
 ooze_shield_angle = 40
 prime_tower_enable = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = =round(layer_height_0 * 0.85, 2)
 support_angle = 70
 switch_extruder_prime_speed = 30
diff --git a/resources/variants/ultimaker3_aa04.inst.cfg b/resources/variants/ultimaker3_aa04.inst.cfg
index 39147a50d7..d708aa724a 100644
--- a/resources/variants/ultimaker3_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_aa04.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = AA 0.4
 machine_nozzle_tip_outer_diameter = 1.0
-raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg
index ac3b3405ee..5d4cd93ef6 100644
--- a/resources/variants/ultimaker3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_bb0.8.inst.cfg
@@ -31,7 +31,6 @@ material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_surface_layers = 1
 retraction_hop = 2
diff --git a/resources/variants/ultimaker3_extended_aa04.inst.cfg b/resources/variants/ultimaker3_extended_aa04.inst.cfg
index 206539e5b6..e4a739516f 100644
--- a/resources/variants/ultimaker3_extended_aa04.inst.cfg
+++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = AA 0.4
 machine_nozzle_tip_outer_diameter = 1.0
-raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
index b33e959e8c..09f97c3562 100644
--- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg
@@ -31,7 +31,6 @@ material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_surface_layers = 1
 retraction_hop = 2
diff --git a/resources/variants/ultimaker_s3_aa04.inst.cfg b/resources/variants/ultimaker_s3_aa04.inst.cfg
index e602c9387f..e860d64cd2 100644
--- a/resources/variants/ultimaker_s3_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s3_aa04.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = AA 0.4
 machine_nozzle_tip_outer_diameter = 1.0
-raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
index 63be458a7e..12dd16e06a 100644
--- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg
@@ -30,7 +30,6 @@ material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_surface_layers = 1
 retraction_hop = 2
diff --git a/resources/variants/ultimaker_s3_cc04.inst.cfg b/resources/variants/ultimaker_s3_cc04.inst.cfg
index 8aa1be2cc8..d056faa5a0 100644
--- a/resources/variants/ultimaker_s3_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc04.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = CC 0.4
 machine_nozzle_size = 0.4
-raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
diff --git a/resources/variants/ultimaker_s3_cc06.inst.cfg b/resources/variants/ultimaker_s3_cc06.inst.cfg
index a6ec116b7f..ac1f171098 100644
--- a/resources/variants/ultimaker_s3_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s3_cc06.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = CC 0.6
 machine_nozzle_size = 0.6
-raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
diff --git a/resources/variants/ultimaker_s5_aa04.inst.cfg b/resources/variants/ultimaker_s5_aa04.inst.cfg
index a0505e8a78..6d55c27cae 100644
--- a/resources/variants/ultimaker_s5_aa04.inst.cfg
+++ b/resources/variants/ultimaker_s5_aa04.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = AA 0.4
 machine_nozzle_tip_outer_diameter = 1.0
-raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 retraction_amount = 6.5
 retraction_min_travel = =line_width * 2
diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
index b8baddc5a7..dde21ab57e 100644
--- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg
+++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg
@@ -30,7 +30,6 @@ material_print_temperature = =default_material_print_temperature + 10
 multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_wipe_enabled = True
-raft_acceleration = =acceleration_layer_0
 raft_airgap = 0
 raft_surface_layers = 1
 retraction_hop = 2
diff --git a/resources/variants/ultimaker_s5_cc04.inst.cfg b/resources/variants/ultimaker_s5_cc04.inst.cfg
index 52ff804937..6632045a92 100644
--- a/resources/variants/ultimaker_s5_cc04.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc04.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = CC 0.4
 machine_nozzle_size = 0.4
-raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed
diff --git a/resources/variants/ultimaker_s5_cc06.inst.cfg b/resources/variants/ultimaker_s5_cc06.inst.cfg
index 4370bb1c4b..3a34e292dc 100644
--- a/resources/variants/ultimaker_s5_cc06.inst.cfg
+++ b/resources/variants/ultimaker_s5_cc06.inst.cfg
@@ -13,7 +13,6 @@ brim_width = 7
 machine_nozzle_cool_down_speed = 0.9
 machine_nozzle_id = CC 0.6
 machine_nozzle_size = 0.6
-raft_acceleration = =acceleration_print
 raft_airgap = 0.3
 retraction_min_travel = =line_width * 2
 retraction_prime_speed = =retraction_speed