diff options
author | Remco Burema <r.burema@ultimaker.com> | 2022-09-21 09:09:40 +0300 |
---|---|---|
committer | Remco Burema <r.burema@ultimaker.com> | 2022-09-21 09:09:40 +0300 |
commit | 836764a237063c5e2e8a226f6ede3f1a790b6c13 (patch) | |
tree | 37c80d1f57e7996ea8b60eb5ed9fb2f512ff23a1 /resources | |
parent | d8f304ca4964236b325498bc2881e3bb35d5729c (diff) |
Revert "Auto generated print profiles. They settings will be reordered and some of the profile names have changed with the "" - Experimental" tag if the isExperimental flag was set."
This reverts commit 4785371f26b0722c2abf585b43054ed5baacb41a.
Diffstat (limited to 'resources')
203 files changed, 636 insertions, 425 deletions
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg index 21b37abac1..694f4f1591 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s3 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = fast +intent_category = visual material = generic_abs variant = AA 0.4 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg index 898c8e3112..3874bc0cce 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_High_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s3 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = high +intent_category = visual material = generic_abs variant = AA 0.4 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg index fd4cda4565..bf3dcdc208 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s3 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = normal +intent_category = visual material = generic_abs variant = AA 0.4 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg index e465f40ed2..2c9b008765 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s3 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = fast +intent_category = visual material = generic_pla variant = AA 0.4 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg index c50fa33475..64a25cd046 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_High_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s3 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = high +intent_category = visual material = generic_pla variant = AA 0.4 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg index 15f4d17fad..5b9177f803 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s3 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = normal +intent_category = visual material = generic_pla variant = AA 0.4 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg index 3afd626d8e..d9c514676d 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s3 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = fast +intent_category = visual material = generic_tough_pla variant = AA 0.4 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg index 2ef6dc756a..05b6b33857 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_High_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s3 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = high +intent_category = visual material = generic_tough_pla variant = AA 0.4 diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg index fd0e3499e5..a7e1e2f83e 100644 --- a/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s3 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = normal +intent_category = visual material = generic_tough_pla variant = AA 0.4 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg index dec4e9a252..e6d8d67c8b 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s5 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = fast +intent_category = visual material = generic_abs variant = AA 0.4 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg index 9df38c762d..4d7510de6d 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_High_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s5 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = high +intent_category = visual material = generic_abs variant = AA 0.4 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg index a9578315ff..a0778dcb25 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s5 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = normal +intent_category = visual material = generic_abs variant = AA 0.4 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg index db38a543f4..35bb47e546 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s5 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = fast +intent_category = visual material = generic_pla variant = AA 0.4 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg index e0e9dab04d..5d5d433d9a 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_High_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s5 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = high +intent_category = visual material = generic_pla variant = AA 0.4 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg index 1874a846e4..ad280d6142 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s5 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = normal +intent_category = visual material = generic_pla variant = AA 0.4 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg index 31a8fa8ef7..2c0ca34f03 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Fast_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s5 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = fast +intent_category = visual material = generic_tough_pla variant = AA 0.4 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg index 99b390a03a..84ab765c21 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_High_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s5 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = high +intent_category = visual material = generic_tough_pla variant = AA 0.4 diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg index e5022cfad4..a3740c80c3 100644 --- a/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg +++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_TPLA_Normal_Visual.inst.cfg @@ -6,8 +6,8 @@ definition = ultimaker_s5 [metadata] setting_version = 20 type = intent -intent_category = visual quality_type = normal +intent_category = visual material = generic_tough_pla variant = AA 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg index afb105b535..4e2114909a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -20,10 +20,10 @@ ooze_shield_angle = 40 raft_airgap = 0.4 retraction_min_travel = 5 skin_overlap = 50 -speed_layer_0 = 10 speed_print = 70 speed_topbottom = =math.ceil(speed_print * 30 / 70) speed_wall = =math.ceil(speed_print * 30 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 +speed_layer_0 = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg index a269239781..705b63ad02 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg @@ -11,6 +11,7 @@ weight = 0 material = generic_pc variant = AA 0.25 is_experimental = True + [values] brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg index d9ee0e629b..376af254f9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg @@ -12,9 +12,10 @@ material = generic_petg variant = AA 0.25 [values] -initial_layer_line_width_factor = 100 -material_print_temperature = =default_material_print_temperature - 5 retraction_combing_max_distance = 8 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 +initial_layer_line_width_factor = 100 + +material_print_temperature = =default_material_print_temperature - 5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg index 16c0c0d676..74c7370130 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg @@ -11,6 +11,7 @@ weight = 0 material = generic_pp variant = AA 0.25 is_experimental = True + [values] brim_width = 10 cool_fan_speed_max = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg index a695827302..1ba0ffd3cd 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg @@ -14,15 +14,16 @@ variant = AA 0.4 [values] machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 20 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False -raft_airgap = 0.15 skin_overlap = 20 -speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = 10 speed_print = 60 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +speed_infill = =math.ceil(speed_print * 50 / 60) + +raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg index 802e5c9d00..33d620ede2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg @@ -15,14 +15,17 @@ variant = AA 0.4 cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 15 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False -raft_airgap = 0.15 -speed_infill = =math.ceil(speed_print * 45 / 60) -speed_layer_0 = 10 speed_print = 60 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + + +speed_infill = =math.ceil(speed_print * 45 / 60) + +raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg index d83461ee9c..5e6ec3e259 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg @@ -15,13 +15,16 @@ variant = AA 0.4 cool_min_speed = 12 machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False -raft_airgap = 0.15 -speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = 10 speed_print = 50 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) + + +speed_infill = =math.ceil(speed_print * 40 / 50) + +raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg index bed87d7b95..4141c023aa 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -14,13 +14,16 @@ variant = AA 0.4 [values] machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 10 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False -raft_airgap = 0.15 -speed_infill = =math.ceil(speed_print * 40 / 55) -speed_layer_0 = 10 speed_print = 55 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) + + +speed_infill = =math.ceil(speed_print * 40 / 55) + +raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg index 2c4432db17..593781314a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg @@ -18,16 +18,17 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 +# prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) -support_angle = 45 -support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +top_bottom_thickness = 1 support_brim_enable = True -support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height -top_bottom_thickness = 1 +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_angle = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg index 7886cc164f..577362391f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg @@ -12,22 +12,23 @@ material = generic_bam variant = AA 0.4 [values] +support_infill_sparse_thickness = =2*layer_height brim_replaces_support = False cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 +# prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 -speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_print = 80 +speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_angle = 45 -support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +top_bottom_thickness = 1 support_brim_enable = True -support_infill_sparse_thickness = =2*layer_height -support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height -top_bottom_thickness = 1 +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_angle = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg index 8731404e73..416a175c81 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -12,20 +12,21 @@ material = generic_bam variant = AA 0.4 [values] +support_infill_sparse_thickness = =2*layer_height brim_replaces_support = False cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 +# prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 70) -support_angle = 45 -support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_brim_enable = True -support_infill_sparse_thickness = =2*layer_height -support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_angle = 45 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg index 8de2272716..a8b51892c7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg @@ -1,16 +1,17 @@ [general] version = 4 -name = Extra Fast - Experimental +name = Extra Fast definition = ultimaker_s3 [metadata] setting_version = 20 type = quality quality_type = verydraft -weight = -3 +weight = -2 material = generic_bam variant = AA 0.4 is_experimental = True + [values] brim_replaces_support = False cool_fan_full_at_height = =layer_height_0 + 2 * layer_height @@ -24,10 +25,10 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) -support_angle = 45 -support_bottom_distance = 0.3 +top_bottom_thickness = 1 support_brim_enable = True -support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) support_top_distance = 0.3 -top_bottom_thickness = 1 +support_bottom_distance = 0.3 +support_angle = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg index 04df2951fa..5d01e40230 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 80 cool_min_speed = 5 + infill_overlap = 0 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 @@ -33,6 +34,7 @@ skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 40 / 50) + speed_wall = =math.ceil(speed_print * 50 / 50) speed_wall_0 = =math.ceil(speed_wall * 40 / 50) support_z_distance = =layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg index d90b6c0a04..73ea3d5cea 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 80 cool_min_speed = 6 + infill_overlap = 0 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 @@ -33,6 +34,7 @@ skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) + speed_wall = =math.ceil(speed_print * 45 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) support_z_distance = =layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg index c043bb9bb7..56ec94d871 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 50 cool_min_speed = 5 + infill_overlap = 0 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg index 3196fc777f..8fda5b84c6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 50 cool_min_speed = 7 + infill_overlap = 0 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg index 00dad75b09..2553121d76 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg @@ -12,16 +12,17 @@ material = generic_cpe variant = AA 0.4 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg index df68316eb1..b8c8538a00 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg @@ -13,15 +13,16 @@ variant = AA 0.4 [values] cool_min_speed = 7 -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 50 / 60)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg index 4850bc393c..360984cc12 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg @@ -13,16 +13,17 @@ variant = AA 0.4 [values] cool_min_speed = 12 -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 40 / 50)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg index 41594ab90f..8db4957fa9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -12,15 +12,16 @@ material = generic_cpe variant = AA 0.4 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_infill = =math.ceil(speed_print * 45 / 55) -speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_print = 55 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 45 / 55)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg index 9d4069eead..a0c909af75 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -14,9 +14,9 @@ variant = AA 0.4 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed @@ -24,4 +24,4 @@ skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg index df0aa521c3..58b6f80f5d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -14,9 +14,9 @@ variant = AA 0.4 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed @@ -24,4 +24,4 @@ skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg index fcc766e14a..0dd7ec5a0d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg @@ -14,8 +14,8 @@ variant = AA 0.4 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 15 -material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed @@ -23,4 +23,4 @@ skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg index bd46912a8d..8f17f79616 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -14,8 +14,8 @@ variant = AA 0.4 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg index 016a66ea60..b3f3aa6cd0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg @@ -17,6 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 8 + infill_overlap = 0 infill_overlap_mm = =0 if infill_sparse_density > 80 else 0.05 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg index 3cb5249538..eaf031fe52 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg @@ -17,6 +17,7 @@ cool_fan_full_at_height = =layer_height_0 + layer_height cool_fan_speed_max = 50 cool_min_layer_time_fan_speed_max = 5 cool_min_speed = 5 + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_wipe_dist = 0.1 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg index f40c3d9968..e77195665a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg @@ -12,16 +12,17 @@ material = generic_petg variant = AA 0.4 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 -material_final_print_temperature = =material_print_temperature - 5 -material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature - 5 retraction_combing_max_distance = 8 skin_overlap = 20 -speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 50 / 60) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg index 496e5662ca..8117c60edc 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg @@ -13,15 +13,16 @@ variant = AA 0.4 [values] cool_min_speed = 7 -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 8 -speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 50 / 60) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg index f710c0fa58..85a05b576a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg @@ -13,16 +13,17 @@ variant = AA 0.4 [values] cool_min_speed = 12 -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 15 -material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 10 +material_final_print_temperature = =material_print_temperature - 15 retraction_combing_max_distance = 8 -speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 40 / 50) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg index a3ef8347f1..b75ab359b4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg @@ -12,16 +12,17 @@ material = generic_petg variant = AA 0.4 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 15 -material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =material_print_temperature - 10 +material_final_print_temperature = =material_print_temperature - 15 retraction_combing_max_distance = 8 -speed_infill = =math.ceil(speed_print * 45 / 55) -speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_print = 55 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 45 / 55) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg index 9e4855a3cc..8daad94c4c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg @@ -12,17 +12,12 @@ material = generic_pla variant = AA 0.4 [values] -acceleration_wall = 2000 -acceleration_wall_0 = 2000 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_sparse_density = 15 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = 10 @@ -30,3 +25,9 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) top_bottom_thickness = 0.8 +infill_sparse_density = 15 +layer_height_0 = 0.2 +acceleration_wall = 2000 +acceleration_wall_0 = 2000 + +raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg index cd95a1ec89..16b0868446 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg @@ -14,15 +14,16 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed -speed_layer_0 = 10 speed_print = 70 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) top_bottom_thickness = 1 +layer_height_0 = 0.2 + +raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg index 789bccd411..6ec0425176 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg @@ -15,16 +15,17 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = 10 speed_print = 50 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 +layer_height_0 = 0.2 + +raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg index 9ef1ae8e0a..4928a166b4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -15,12 +15,13 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = 10 top_bottom_thickness = 1 +layer_height_0 = 0.2 + +raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg index d89657527b..d20c1303b8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -1,33 +1,38 @@ [general] version = 4 -name = Extra Fast - Experimental +name = Extra Fast definition = ultimaker_s3 [metadata] setting_version = 20 type = quality quality_type = verydraft -weight = -3 +weight = -2 material = generic_pla variant = AA 0.4 is_experimental = True + [values] +infill_sparse_density = 15 acceleration_print = 2000 -acceleration_topbottom = 1000 acceleration_wall = 1500 acceleration_wall_0 = 1000 +acceleration_topbottom = 1000 +speed_print = 50 +speed_wall = 50 + cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -infill_sparse_density = 15 + +material_print_temperature = =default_material_print_temperature + 10 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_print = 50 -speed_wall = 50 top_bottom_thickness = 0.9 -wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' + +raft_airgap = 0.25 +wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg index a26e442819..d68e3dd779 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg @@ -17,6 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg index 06cf202bc6..7eed793e6a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg @@ -40,6 +40,7 @@ retraction_min_travel = 0.8 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) + speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg index 61453c278c..97c92f934c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg @@ -17,6 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 @@ -40,6 +41,7 @@ retraction_min_travel = 0.8 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) + speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg index 72be73dc22..ae44c3f019 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg @@ -15,16 +15,17 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 +layer_height_0 = 0.2 + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg index 4f594f4dc4..2d05a15f3c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -1,33 +1,38 @@ [general] version = 4 -name = Extra Fast - Experimental +name = Extra Fast definition = ultimaker_s3 [metadata] setting_version = 20 type = quality quality_type = verydraft -weight = -3 +weight = -2 material = generic_tough_pla variant = AA 0.4 is_experimental = True + [values] +infill_sparse_density = 15 acceleration_print = 2000 -acceleration_topbottom = 1000 acceleration_wall = 1500 acceleration_wall_0 = 1000 +acceleration_topbottom = 1000 +speed_print = 50 +speed_wall = 50 + cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -infill_sparse_density = 15 + +material_print_temperature = =default_material_print_temperature - 5 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_print = 50 -speed_wall = 50 top_bottom_thickness = 1.2 -wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' + +raft_airgap = 0.25 +wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg index b461efb73b..24ae39f8b1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg @@ -17,6 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg index 08fcbc3187..468184028c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg @@ -17,6 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg index 0be0f52120..333307e533 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -17,6 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg index 7afbea4788..e314a6080d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Draft_Print.inst.cfg @@ -12,6 +12,7 @@ material = generic_abs variant = AA 0.8 [values] + material_print_temperature = =default_material_print_temperature + 20 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg index e473cd6f28..c983a4558c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -12,9 +12,10 @@ material = generic_abs variant = AA 0.8 [values] + material_print_temperature = =default_material_print_temperature + 25 -speed_infill = =math.ceil(speed_print * 37 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg index 2571776d35..199e80e9ac 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -12,6 +12,7 @@ material = generic_abs variant = AA 0.8 [values] + material_print_temperature = =default_material_print_temperature + 22 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg index 4ba71e0357..a694688d41 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -1,19 +1,22 @@ [general] version = 4 -name = Normal - Experimental +name = Fast - Experimental definition = ultimaker_s3 [metadata] setting_version = 20 type = quality -quality_type = fast -weight = -1 +quality_type = draft +weight = -2 material = generic_cpe_plus variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg index b54dec7fff..38413229e0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -11,9 +11,12 @@ weight = -4 material = generic_cpe_plus variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 @@ -23,12 +26,12 @@ retraction_combing_max_distance = 50 retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_infill = =math.ceil(speed_print * 40 / 50) speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 40 / 50) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg index 47d12c3da7..b238164e4f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -11,9 +11,12 @@ weight = -3 material = generic_cpe_plus variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg index c05205a9f2..6421e5ea77 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Draft_Print.inst.cfg @@ -13,6 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 + material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True retraction_combing_max_distance = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg index 8cd5ba4ac2..93756a3621 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -13,11 +13,13 @@ variant = AA 0.8 [values] brim_width = 15 + material_print_temperature = =default_material_print_temperature + 20 prime_tower_enable = True retraction_combing_max_distance = 50 -speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + +speed_infill = =math.ceil(speed_print * 33 / 45)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg index 1d619bf42c..2afb9dc78a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -13,6 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 + material_print_temperature = =default_material_print_temperature + 17 prime_tower_enable = True retraction_combing_max_distance = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg index c11350773c..09de59ba20 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -15,6 +15,8 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 4539cab117..d6e11ca953 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -15,6 +15,8 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 3736e729e9..599789f528 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -15,6 +15,8 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg index a5a7ff0018..61d0cc5109 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg @@ -1,19 +1,22 @@ [general] version = 4 -name = Normal - Experimental +name = Fast - Experimental definition = ultimaker_s3 [metadata] setting_version = 20 type = quality -quality_type = fast -weight = -1 +quality_type = draft +weight = -2 material = generic_pc variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height + + material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg index b34df4a1ac..f441c0acac 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -11,16 +11,19 @@ weight = -4 material = generic_pc variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height + + material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 skin_overlap = 0 -speed_infill = =math.ceil(speed_print * 37 / 50) speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg index 546f3a80ae..a044987670 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -11,9 +11,12 @@ weight = -3 material = generic_pc variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height + + material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg index 9e900c5658..5b4142f762 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg @@ -13,11 +13,12 @@ variant = AA 0.8 [values] brim_width = 7 -cool_fan_speed = 20 -initial_layer_line_width_factor = 100 + material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) +cool_fan_speed = 20 +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg index 8b9fa7de7f..2aae9c8933 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -13,13 +13,14 @@ variant = AA 0.8 [values] brim_width = 7 -cool_fan_speed = 20 -initial_layer_line_width_factor = 100 + material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 -speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) +cool_fan_speed = 20 +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg index 4dbd1099f4..85b076551c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -13,12 +13,14 @@ variant = AA 0.8 [values] brim_width = 7 -cool_fan_speed = 20 -initial_layer_line_width_factor = 100 -layer_height_0 = 0.27 + material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) +cool_fan_speed = 20 +layer_height_0 = 0.27 +initial_layer_line_width_factor = 100 + diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg index 4aad3505c6..60244f52af 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg @@ -16,17 +16,17 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True +support_angle = 70 +top_bottom_thickness = =layer_height * 4 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall -support_angle = 70 -top_bottom_thickness = =layer_height * 4 +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg index a5aef78a45..a2e863cb8d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -16,18 +16,18 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True -speed_infill = =math.ceil(speed_print * 35 / 45) +support_angle = 70 +top_bottom_thickness = =layer_height * 4 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 35 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall -support_angle = 70 -top_bottom_thickness = =layer_height * 4 +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 35 / 45) +layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg index 0e1200ea48..a67dc3be1b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -16,17 +16,17 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True +support_angle = 70 +top_bottom_thickness = =layer_height * 4 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall -support_angle = 70 -top_bottom_thickness = =layer_height * 4 +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg index 2ed16d2428..e2904aa1e7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg @@ -15,6 +15,7 @@ variant = AA 0.8 brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 @@ -33,5 +34,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 -top_skin_expand_distance = =line_width * 2 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg index 932e74a409..d4508c05c0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -15,6 +15,7 @@ variant = AA 0.8 brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 @@ -28,11 +29,10 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -speed_infill = =math.ceil(speed_wall * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_infill = =math.ceil(speed_wall * 30 / 30) switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 -top_skin_expand_distance = =line_width * 2 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg index 19c2b14c99..b68839785f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -15,6 +15,7 @@ variant = AA 0.8 brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -32,5 +33,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 -top_skin_expand_distance = =line_width * 2 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg index a03f52f4c2..f611f7d17e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.8 [values] brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -40,6 +41,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 -top_skin_expand_distance = =line_width * 2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg index b881b5d3a6..e7d370cb8a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.8 [values] brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.5 @@ -32,16 +33,15 @@ retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 -speed_infill = =speed_print speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =speed_print speed_wall_x = =speed_print +speed_infill = =speed_print support_angle = 50 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 -top_skin_expand_distance = =line_width * 2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg index f8d758abb0..f318034971 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.8 [values] brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.5 @@ -40,6 +41,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 -top_skin_expand_distance = =line_width * 2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg index 8e517d0ee5..f9ea2ed4db 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg @@ -13,12 +13,12 @@ variant = BB 0.4 [values] brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = False retraction_count_max = 5 skin_overlap = 20 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg index e4bd6f7f98..9ca8ea51ec 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg @@ -12,14 +12,14 @@ material = generic_pva variant = BB 0.4 [values] +support_infill_sparse_thickness = =2*layer_height brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False retraction_count_max = 5 skin_overlap = 15 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True -support_infill_sparse_thickness = =2*layer_height support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg index 3708aaf544..018298d706 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg @@ -12,12 +12,12 @@ material = generic_pva variant = BB 0.4 [values] +support_infill_sparse_thickness = =3*layer_height brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) prime_tower_enable = False retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True -support_infill_sparse_thickness = =3*layer_height support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg index d9cdfe4f58..48394a8feb 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -12,12 +12,12 @@ material = generic_pva variant = BB 0.4 [values] +support_infill_sparse_thickness = =2*layer_height brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) prime_tower_enable = False retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True -support_infill_sparse_thickness = =2*layer_height support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg index 8a10923b48..85e530fdc1 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg @@ -1,6 +1,6 @@ [general] version = 4 -name = Extra Fast - Experimental +name = Extra Fast definition = ultimaker_s3 [metadata] @@ -11,12 +11,13 @@ weight = -3 material = generic_pva variant = BB 0.4 is_experimental = True + [values] brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg index 78d4987cab..ab1a289761 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg @@ -13,10 +13,10 @@ variant = BB 0.8 [values] brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg index 97cc65b8ce..0e2f072d03 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -13,9 +13,9 @@ variant = BB 0.8 [values] brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg index 87d10a7987..d5ff375abb 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -13,10 +13,10 @@ variant = BB 0.8 [values] brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg index e90b9c6d2b..0ad61736ab 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg @@ -16,7 +16,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 + initial_layer_line_width_factor = 130.0 + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -24,3 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg index 36a0eb09c8..758a81d3a8 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg @@ -7,7 +7,7 @@ definition = ultimaker_s3 setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_cffcpe variant = CC 0.4 @@ -16,7 +16,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 + initial_layer_line_width_factor = 130.0 + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -24,3 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg index 6c380d6295..a0ca08eb8a 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg @@ -16,7 +16,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 + initial_layer_line_width_factor = 130.0 + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -24,3 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg index faf738c643..d538f95bea 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg @@ -7,7 +7,7 @@ definition = ultimaker_s3 setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_cffpa variant = CC 0.4 @@ -16,7 +16,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 + initial_layer_line_width_factor = 130.0 + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -24,3 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg index 1173c7339c..2caa3776eb 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg @@ -16,7 +16,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 + initial_layer_line_width_factor = 130.0 + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -24,3 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg index 6d5ccf3855..f9fffb3171 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg @@ -7,7 +7,7 @@ definition = ultimaker_s3 setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_gffcpe variant = CC 0.4 @@ -16,7 +16,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 + initial_layer_line_width_factor = 130.0 + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -24,3 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg index c91e9a0fff..465bff3d8d 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg @@ -16,7 +16,9 @@ cool_fan_enabled = True cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 15 cool_min_speed = 6 + initial_layer_line_width_factor = 130.0 + material_bed_temperature_layer_0 = =material_bed_temperature + 5 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =material_print_temperature @@ -24,3 +26,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg index b6d9f5e2a1..40df72973c 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg @@ -7,7 +7,7 @@ definition = ultimaker_s3 setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_gffpa variant = CC 0.4 @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg index 7e063af586..1a4abc69eb 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg @@ -1,16 +1,17 @@ [general] version = 4 -name = Fast - Experimental +name = Fast definition = ultimaker_s3 [metadata] setting_version = 20 type = quality quality_type = draft -weight = -2 +weight = -3 material = generic_pla variant = CC 0.4 is_experimental = True + [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 @@ -26,7 +27,7 @@ prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg index 6844077345..64640ddc5f 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg @@ -1,16 +1,17 @@ [general] version = 4 -name = Normal - Experimental +name = Normal definition = ultimaker_s3 [metadata] setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_pla variant = CC 0.4 is_experimental = True + [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 @@ -26,7 +27,7 @@ prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg index 1e19814d67..8a617f2d04 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg index 662f167f69..9c396012bb 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg index 6975526d71..de38df43ee 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg index 986dda1437..5b3c0024ab 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg index 981136de08..b80ecb7ed0 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg @@ -1,16 +1,17 @@ [general] version = 4 -name = Fast - Experimental +name = Fast definition = ultimaker_s3 [metadata] setting_version = 20 type = quality quality_type = draft -weight = -2 +weight = -3 material = generic_pla variant = CC 0.6 is_experimental = True + [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 @@ -26,7 +27,7 @@ prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg index 7bcd60381e..1644b7d2ff 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg @@ -1,16 +1,17 @@ [general] version = 4 -name = Normal - Experimental +name = Normal definition = ultimaker_s3 [metadata] setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_pla variant = CC 0.6 is_experimental = True + [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 @@ -26,7 +27,7 @@ prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg index f31ea87a5c..b06a514334 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.25 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 @@ -26,3 +27,4 @@ speed_wall = =math.ceil(speed_print * 30 / 70) switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg index 93f97670ef..abb891489e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PC_Normal_Quality.inst.cfg @@ -11,6 +11,7 @@ weight = 0 material = generic_pc variant = AA 0.25 is_experimental = True + [values] brim_width = 20 cool_fan_full_at_height = =layer_height_0 + layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg index 5f7d46dc8b..3df31368bd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg @@ -12,9 +12,9 @@ material = generic_petg variant = AA 0.25 [values] -initial_layer_line_width_factor = 100 -material_print_temperature = =default_material_print_temperature - 5 retraction_combing_max_distance = 8 speed_infill = =math.ceil(speed_print * 40 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 +initial_layer_line_width_factor = 100 +material_print_temperature = =default_material_print_temperature - 5
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg index 178e738069..e49dce4989 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg @@ -11,6 +11,7 @@ weight = 0 material = generic_pp variant = AA 0.25 is_experimental = True + [values] brim_width = 10 cool_fan_speed_max = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg index 41b2f693fd..4769b27977 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg @@ -14,15 +14,15 @@ variant = AA 0.4 [values] machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 20 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False -raft_airgap = 0.15 skin_overlap = 20 -speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = 10 speed_print = 60 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +speed_infill = =math.ceil(speed_print * 50 / 60) +raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg index a6fc9c5462..7001d74a46 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg @@ -15,14 +15,14 @@ variant = AA 0.4 cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 15 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False -raft_airgap = 0.15 -speed_infill = =math.ceil(speed_print * 45 / 60) -speed_layer_0 = 10 speed_print = 60 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 45 / 60) +raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg index 496d17b2e8..0383c18746 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg @@ -15,13 +15,16 @@ variant = AA 0.4 cool_min_speed = 12 machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False -raft_airgap = 0.15 -speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = 10 speed_print = 50 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) + + +speed_infill = =math.ceil(speed_print * 40 / 50) + +raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg index d7f7be3a31..004a29cf0a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg @@ -14,13 +14,15 @@ variant = AA 0.4 [values] machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 20 -material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 10 +material_initial_print_temperature = =material_print_temperature - 15 +material_final_print_temperature = =material_print_temperature - 20 prime_tower_enable = False -raft_airgap = 0.15 -speed_infill = =math.ceil(speed_print * 40 / 55) -speed_layer_0 = 10 speed_print = 55 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) + + +speed_infill = =math.ceil(speed_print * 40 / 55) +raft_airgap = 0.15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg index 3271e26dba..28d7691462 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Draft_Print.inst.cfg @@ -18,16 +18,17 @@ cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 +# prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) -support_angle = 45 -support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +top_bottom_thickness = 1 support_brim_enable = True -support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height -top_bottom_thickness = 1 +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_angle = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg index 2ff072d0e1..e2450cd6b0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Fast_Print.inst.cfg @@ -12,22 +12,23 @@ material = generic_bam variant = AA 0.4 [values] +support_infill_sparse_thickness = =2*layer_height brim_replaces_support = False cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 +# prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 -speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_print = 80 +speed_layer_0 = =math.ceil(speed_print * 20 / 80) speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) -support_angle = 45 -support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +top_bottom_thickness = 1 support_brim_enable = True -support_infill_sparse_thickness = =2*layer_height -support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height -top_bottom_thickness = 1 +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_angle = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg index 5e6203dbbf..24f007b99b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_Normal_Quality.inst.cfg @@ -12,20 +12,21 @@ material = generic_bam variant = AA 0.4 [values] +support_infill_sparse_thickness = =2*layer_height brim_replaces_support = False cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 +# prime_tower_enable: see CURA-4248 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 70) -support_angle = 45 -support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_brim_enable = True -support_infill_sparse_thickness = =2*layer_height -support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 1) * layer_height +support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height +support_angle = 45 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg index 7417ee6c6f..f6769a439f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_BAM_VeryDraft_Print.inst.cfg @@ -1,16 +1,17 @@ [general] version = 4 -name = Extra Fast - Experimental +name = Extra Fast definition = ultimaker_s5 [metadata] setting_version = 20 type = quality quality_type = verydraft -weight = -3 +weight = -2 material = generic_bam variant = AA 0.4 is_experimental = True + [values] brim_replaces_support = False cool_fan_full_at_height = =layer_height_0 + 2 * layer_height @@ -24,10 +25,10 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) -support_angle = 45 -support_bottom_distance = 0.3 +top_bottom_thickness = 1 support_brim_enable = True -support_interface_density = =min(extruderValues('material_surface_energy')) support_interface_enable = True +support_interface_density = =min(extruderValues('material_surface_energy')) support_top_distance = 0.3 -top_bottom_thickness = 1 +support_bottom_distance = 0.3 +support_angle = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg index c39d1516af..ecc8682f28 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Draft_Print.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 80 cool_min_speed = 5 + infill_overlap = 0 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 @@ -33,6 +34,7 @@ skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 40 / 50) + speed_wall = =math.ceil(speed_print * 50 / 50) speed_wall_0 = =math.ceil(speed_wall * 40 / 50) support_z_distance = =layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg index 5d74e6164b..fa3b571769 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Fast_Print.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 80 cool_min_speed = 6 + infill_overlap = 0 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 @@ -33,6 +34,7 @@ skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) + speed_wall = =math.ceil(speed_print * 45 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) support_z_distance = =layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg index cef6d64e99..26a8059fed 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_High_Quality.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.4 [values] cool_fan_speed_max = 50 cool_min_speed = 5 + infill_overlap = 0 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 @@ -35,6 +36,7 @@ skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) + speed_wall = =math.ceil(speed_print * 35 / 40) speed_wall_0 = =math.ceil(speed_wall * 30 / 35) support_z_distance = =layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg index 2d33b40631..1795b2086f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -35,6 +35,7 @@ skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 40) speed_print = 40 speed_topbottom = =math.ceil(speed_print * 30 / 35) + speed_wall = =math.ceil(speed_print * 35 / 40) speed_wall_0 = =math.ceil(speed_wall * 30 / 35) support_z_distance = =layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg index 6b1f8504d2..bdfd6aadea 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Draft_Print.inst.cfg @@ -12,16 +12,16 @@ material = generic_cpe variant = AA 0.4 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 50 / 60) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg index de3910f816..68d2879f47 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Fast_Print.inst.cfg @@ -13,15 +13,16 @@ variant = AA 0.4 [values] cool_min_speed = 7 -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 50 / 60)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg index 546af06919..40d950871d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_High_Quality.inst.cfg @@ -13,16 +13,17 @@ variant = AA 0.4 [values] cool_min_speed = 12 -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 40 / 50)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg index 2614b40d60..a5cab8a96c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_CPE_Normal_Quality.inst.cfg @@ -12,15 +12,16 @@ material = generic_cpe variant = AA 0.4 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 50 retraction_prime_speed = =retraction_speed -speed_infill = =math.ceil(speed_print * 45 / 55) -speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_print = 55 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 45 / 55)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg index e4d6d270ee..f0ced52d33 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg @@ -14,9 +14,9 @@ variant = AA 0.4 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 10 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg index 8b77d7010f..90fd37a5fb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg @@ -14,9 +14,9 @@ variant = AA 0.4 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg index 72c3e257d1..c6a9e2b017 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg @@ -14,8 +14,8 @@ variant = AA 0.4 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 15 -material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed @@ -23,4 +23,4 @@ skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg index e3fbfc5b6e..0b0ea1fb9f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -14,8 +14,8 @@ variant = AA 0.4 [values] cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 12 -material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 ooze_shield_angle = 40 raft_airgap = 0.4 retraction_prime_speed = =retraction_speed @@ -23,4 +23,4 @@ skin_overlap = 50 speed_layer_0 = 10 switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 -switch_extruder_retraction_speeds = 40 +switch_extruder_retraction_speeds = 40
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg index 739e168d62..3fa9480c24 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PC_Fast_Print.inst.cfg @@ -38,6 +38,7 @@ skin_overlap = 30 speed_layer_0 = =math.ceil(speed_print * 25 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 25 / 50) + speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 25 / 40) support_interface_density = 87.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg index 62d24807b6..3e0bd8d4b8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg @@ -12,16 +12,16 @@ material = generic_petg variant = AA 0.4 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 -material_final_print_temperature = =material_print_temperature - 5 -material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature + 5 +material_initial_print_temperature = =material_print_temperature +material_final_print_temperature = =material_print_temperature - 5 retraction_combing_max_distance = 8 skin_overlap = 20 -speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 50 / 60) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg index d5a87efce1..f9a8aa8915 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg @@ -13,15 +13,16 @@ variant = AA 0.4 [values] cool_min_speed = 7 -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 -material_final_print_temperature = =material_print_temperature - 10 -material_initial_print_temperature = =material_print_temperature - 5 material_print_temperature = =default_material_print_temperature +material_initial_print_temperature = =material_print_temperature - 5 +material_final_print_temperature = =material_print_temperature - 10 retraction_combing_max_distance = 8 -speed_infill = =math.ceil(speed_print * 50 / 60) -speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 +speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 50 / 60) +initial_layer_line_width_factor = 100
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg index 49978a1b46..289521bd01 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg @@ -13,16 +13,17 @@ variant = AA 0.4 [values] cool_min_speed = 12 -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 15 -material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 10 +material_initial_print_temperature = =material_print_temperature - 10 +material_final_print_temperature = =material_print_temperature - 15 retraction_combing_max_distance = 8 -speed_infill = =math.ceil(speed_print * 40 / 50) -speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 +speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 40 / 50) +initial_layer_line_width_factor = 100
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg index 6e4a6907de..8129f66fc3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg @@ -12,16 +12,16 @@ material = generic_petg variant = AA 0.4 [values] -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -initial_layer_line_width_factor = 100 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 -material_final_print_temperature = =material_print_temperature - 15 -material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 5 +material_initial_print_temperature = =material_print_temperature - 10 +material_final_print_temperature = =material_print_temperature - 15 retraction_combing_max_distance = 8 -speed_infill = =math.ceil(speed_print * 45 / 55) -speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_print = 55 +speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' +speed_infill = =math.ceil(speed_print * 45 / 55) +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg index bda40276c4..41944ad06e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg @@ -12,17 +12,12 @@ material = generic_pla variant = AA 0.4 [values] -acceleration_wall = 2000 -acceleration_wall_0 = 2000 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_sparse_density = 15 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 speed_layer_0 = 10 @@ -30,3 +25,8 @@ speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) top_bottom_thickness = 0.8 +infill_sparse_density = 15 +layer_height_0 = 0.2 +acceleration_wall = 2000 +acceleration_wall_0 = 2000 +raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg index b58cabc738..66aa89a6a7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg @@ -14,15 +14,15 @@ variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed -speed_layer_0 = 10 speed_print = 70 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 70) top_bottom_thickness = 1 +layer_height_0 = 0.2 +raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg index 5a7f57ac29..1d498d252a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg @@ -15,16 +15,16 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = 10 speed_print = 50 +speed_layer_0 = 10 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 35 / 50) top_bottom_thickness = 1 +layer_height_0 = 0.2 +raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg index 7d6815f135..1eb4fd8735 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg @@ -15,12 +15,12 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 7 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 10 speed_layer_0 = 10 top_bottom_thickness = 1 +layer_height_0 = 0.2 +raft_airgap = 0.25 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg index e89b30990c..962f906e74 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_VeryDraft_Print.inst.cfg @@ -1,33 +1,39 @@ [general] version = 4 -name = Extra Fast - Experimental +name = Extra Fast definition = ultimaker_s5 [metadata] setting_version = 20 type = quality quality_type = verydraft -weight = -3 +weight = -2 material = generic_pla variant = AA 0.4 is_experimental = True + [values] +infill_sparse_density = 15 acceleration_print = 2000 -acceleration_topbottom = 1000 acceleration_wall = 1500 acceleration_wall_0 = 1000 +acceleration_topbottom = 1000 +speed_print = 50 +speed_wall = 50 + cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -infill_sparse_density = 15 + +material_print_temperature = =default_material_print_temperature + 10 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature + 10 + prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_print = 50 -speed_wall = 50 top_bottom_thickness = 0.9 -wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' + +raft_airgap = 0.25 +wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg index ebb514af89..082e20d372 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg @@ -17,6 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg index 0abc43467b..d98cbc9037 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg @@ -17,6 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 @@ -40,6 +41,7 @@ retraction_min_travel = 0.8 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) + speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg index bd8ab98e55..ebc2639424 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg @@ -17,6 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time = 7 cool_min_layer_time_fan_speed_max = 7 cool_min_speed = 2.5 + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' infill_wipe_dist = 0.1 @@ -40,6 +41,7 @@ retraction_min_travel = 0.8 speed_layer_0 = =math.ceil(speed_print * 15 / 25) speed_print = 25 speed_topbottom = =math.ceil(speed_print * 25 / 25) + speed_travel_layer_0 = 50 speed_wall = =math.ceil(speed_print * 25 / 25) speed_wall_0 = =math.ceil(speed_wall * 25 / 25) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg index bf8686d358..3bb7ba5d2f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_High_Quality.inst.cfg @@ -15,16 +15,16 @@ variant = AA 0.4 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed cool_min_speed = 10 -layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 15 prime_tower_enable = False retraction_prime_speed = =retraction_speed skin_overlap = 10 -speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_print = 45 +speed_layer_0 = =math.ceil(speed_print * 20 / 45) speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) top_bottom_thickness = 1.2 +layer_height_0 = 0.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg index 1758a95b61..5150537256 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPLA_VeryDraft_Print.inst.cfg @@ -1,33 +1,38 @@ [general] version = 4 -name = Extra Fast - Experimental +name = Extra Fast definition = ultimaker_s5 [metadata] setting_version = 20 type = quality quality_type = verydraft -weight = -3 +weight = -2 material = generic_tough_pla variant = AA 0.4 is_experimental = True + [values] +infill_sparse_density = 15 acceleration_print = 2000 -acceleration_topbottom = 1000 acceleration_wall = 1500 acceleration_wall_0 = 1000 +acceleration_topbottom = 1000 +speed_print = 50 +speed_wall = 50 + cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =cool_fan_speed -infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' -infill_sparse_density = 15 + +material_print_temperature = =default_material_print_temperature - 5 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = False -raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 -speed_print = 50 -speed_wall = 50 top_bottom_thickness = 1.2 -wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25) + +infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' + +raft_airgap = 0.25 +wall_line_width_0 = =line_width * (1 + magic_spiralize * 0.25)
\ No newline at end of file diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg index 19324e1777..dc8fb80084 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg @@ -17,6 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg index 86c8817c5d..ed9a9e7756 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg @@ -17,6 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg index 42ad6c4cd2..61602c2e7b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg @@ -17,6 +17,7 @@ cool_fan_speed_max = 100 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 4 gradual_infill_step_height = =5 * layer_height + infill_overlap = 0 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg index 72f29e606b..ee5dff1264 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Draft_Print.inst.cfg @@ -12,6 +12,7 @@ material = generic_abs variant = AA 0.8 [values] + material_print_temperature = =default_material_print_temperature + 20 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg index 6b352edb2d..8de9e328d9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -12,9 +12,10 @@ material = generic_abs variant = AA 0.8 [values] + material_print_temperature = =default_material_print_temperature + 25 -speed_infill = =math.ceil(speed_print * 37 / 50) speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg index b90f30046d..3255684648 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -12,6 +12,7 @@ material = generic_abs variant = AA 0.8 [values] + material_print_temperature = =default_material_print_temperature + 22 speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg index b04bc2227f..3c1491befd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Fast_Print.inst.cfg @@ -1,19 +1,21 @@ [general] version = 4 -name = Normal - Experimental +name = Fast - Experimental definition = ultimaker_s5 [metadata] setting_version = 20 type = quality -quality_type = fast -weight = -1 +quality_type = draft +weight = -2 material = generic_cpe_plus variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 10 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg index d3f95d449f..30b1940b9c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -11,9 +11,12 @@ weight = -4 material = generic_cpe_plus variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 @@ -23,12 +26,12 @@ retraction_combing_max_distance = 50 retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 -speed_infill = =math.ceil(speed_print * 40 / 50) speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 35 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 40 / 50) support_z_distance = =layer_height top_bottom_thickness = 1.2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg index a2c896836f..01cdfb6142 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -11,9 +11,12 @@ weight = -3 material = generic_cpe_plus variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 7 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg index 19f7e7be37..ed90985548 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Draft_Print.inst.cfg @@ -13,6 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 + material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True retraction_combing_max_distance = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg index d15f1a7c84..87d8bb69e1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -13,11 +13,12 @@ variant = AA 0.8 [values] brim_width = 15 + material_print_temperature = =default_material_print_temperature + 20 prime_tower_enable = True retraction_combing_max_distance = 50 -speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg index 721d0a8752..970964203f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -13,6 +13,7 @@ variant = AA 0.8 [values] brim_width = 15 + material_print_temperature = =default_material_print_temperature + 17 prime_tower_enable = True retraction_combing_max_distance = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg index 8e73a5a755..fc9d586503 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -15,6 +15,8 @@ variant = AA 0.8 brim_width = 5.6 cool_min_layer_time_fan_speed_max = 20 cool_min_speed = 10 + + machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 ooze_shield_angle = 40 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg index 354b187085..30877bf726 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Fast_Print.inst.cfg @@ -1,19 +1,22 @@ [general] version = 4 -name = Normal - Experimental +name = Fast - Experimental definition = ultimaker_s5 [metadata] setting_version = 20 type = quality -quality_type = fast -weight = -1 +quality_type = draft +weight = -2 material = generic_pc variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height + + material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 @@ -24,3 +27,4 @@ speed_slowdown_layers = 15 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg index 6cfd2c8d94..fd3ae94a9e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Superdraft_Print.inst.cfg @@ -11,16 +11,19 @@ weight = -4 material = generic_pc variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 7 * layer_height + + material_print_temperature_layer_0 = =material_print_temperature raft_airgap = 0.5 skin_overlap = 0 -speed_infill = =math.ceil(speed_print * 37 / 50) speed_layer_0 = =math.ceil(speed_print * 15 / 50) speed_print = 50 speed_slowdown_layers = 8 speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 37 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 37 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg index 0b9e0f27bf..6fe4bd5999 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PC_Verydraft_Print.inst.cfg @@ -11,6 +11,7 @@ weight = -3 material = generic_pc variant = AA 0.8 is_experimental = True + [values] brim_width = 14 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg index 47a26097f5..926a1394bd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg @@ -13,11 +13,12 @@ variant = AA 0.8 [values] brim_width = 7 -cool_fan_speed = 20 -initial_layer_line_width_factor = 100 + material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) +cool_fan_speed = 20 +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg index f13991359d..1d2b4bf257 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -13,13 +13,14 @@ variant = AA 0.8 [values] brim_width = 7 -cool_fan_speed = 20 -initial_layer_line_width_factor = 100 + material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 -speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) speed_wall = =math.ceil(speed_print * 33 / 45) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) +speed_infill = =math.ceil(speed_print * 33 / 45) +cool_fan_speed = 20 +initial_layer_line_width_factor = 100 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg index 41e42809cf..d9a6c58217 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -13,11 +13,13 @@ variant = AA 0.8 [values] brim_width = 7 -cool_fan_speed = 20 -initial_layer_line_width_factor = 100 + material_print_temperature = =default_material_print_temperature - 5 prime_tower_enable = True retraction_combing_max_distance = 8 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) +cool_fan_speed = 20 +initial_layer_line_width_factor = 100 + diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg index cac2e008fc..5a75d250ae 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Draft_Print.inst.cfg @@ -16,17 +16,17 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True +support_angle = 70 +top_bottom_thickness = =layer_height * 4 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall -support_angle = 70 -top_bottom_thickness = =layer_height * 4 +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg index 1703c141e2..7f1cf80f12 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -16,18 +16,18 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 prime_tower_enable = True -speed_infill = =math.ceil(speed_print * 35 / 45) +support_angle = 70 +top_bottom_thickness = =layer_height * 4 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 35 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall -support_angle = 70 -top_bottom_thickness = =layer_height * 4 +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +speed_infill = =math.ceil(speed_print * 35 / 45) +layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg index 07f93e993f..9da869a34e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -16,17 +16,17 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 cool_min_speed = 2 gradual_infill_step_height = =3 * layer_height -layer_height_0 = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = True +support_angle = 70 +top_bottom_thickness = =layer_height * 4 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall -support_angle = 70 -top_bottom_thickness = =layer_height * 4 +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) +layer_height_0 = 0.4 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg index 4c262310e8..f3deb0b0f9 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg @@ -15,6 +15,7 @@ variant = AA 0.8 brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature - 2 @@ -33,5 +34,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 -top_skin_expand_distance = =line_width * 2 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg index 539e6335c7..859f408ffb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg @@ -15,6 +15,7 @@ variant = AA 0.8 brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature = =default_material_print_temperature + 2 @@ -28,11 +29,10 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 retraction_min_travel = 1.5 retraction_prime_speed = 15 -speed_infill = =math.ceil(speed_wall * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) +speed_infill = =math.ceil(speed_wall * 30 / 30) switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 -top_skin_expand_distance = =line_width * 2 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg index 9c3cb44e07..85ca930444 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg @@ -15,6 +15,7 @@ variant = AA 0.8 brim_width = 25 cool_min_layer_time_fan_speed_max = 6 cool_min_speed = 17 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 @@ -32,5 +33,4 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.6 -top_skin_expand_distance = =line_width * 2 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg index 57dc15f243..32351241f7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.8 [values] brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 @@ -40,6 +41,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 -top_skin_expand_distance = =line_width * 2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg index 1d8cf0809c..6e3732f812 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.8 [values] brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.5 @@ -31,16 +32,15 @@ retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 -speed_infill = =speed_print speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) speed_wall = =speed_print speed_wall_x = =speed_print +speed_infill = =speed_print support_angle = 50 switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 -top_skin_expand_distance = =line_width * 2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg index 95e5da677d..ab43aa6af3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -14,6 +14,7 @@ variant = AA 0.8 [values] brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 +top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.5 @@ -40,6 +41,5 @@ switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 -top_skin_expand_distance = =line_width * 2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2 diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg index 325692a5b7..05069e722c 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg @@ -13,12 +13,12 @@ variant = BB 0.4 [values] brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 10 prime_tower_enable = False retraction_count_max = 5 skin_overlap = 20 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg index e445afe911..7539f5fdb1 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg @@ -12,14 +12,14 @@ material = generic_pva variant = BB 0.4 [values] +support_infill_sparse_thickness = =2*layer_height brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 prime_tower_enable = False retraction_count_max = 5 skin_overlap = 15 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True -support_infill_sparse_thickness = =2*layer_height support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg index 4f70be3b8c..c320676f02 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg @@ -12,12 +12,12 @@ material = generic_pva variant = BB 0.4 [values] +support_infill_sparse_thickness = =3*layer_height brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) prime_tower_enable = False retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True -support_infill_sparse_thickness = =3*layer_height support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg index 50ca204965..a068c96756 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg @@ -12,12 +12,12 @@ material = generic_pva variant = BB 0.4 [values] +support_infill_sparse_thickness = =2*layer_height brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) prime_tower_enable = False retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True -support_infill_sparse_thickness = =2*layer_height support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg index fd239c5343..c8c7971f09 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg @@ -1,6 +1,6 @@ [general] version = 4 -name = Extra Fast - Experimental +name = Extra Fast definition = ultimaker_s5 [metadata] @@ -11,13 +11,14 @@ weight = -3 material = generic_pva variant = BB 0.4 is_experimental = True + [values] brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) prime_tower_enable = False retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg index 27618f9478..e526fc6426 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg @@ -13,10 +13,10 @@ variant = BB 0.8 [values] brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg index 45c178e704..ae5b0aacfe 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -13,9 +13,9 @@ variant = BB 0.8 [values] brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg index 60a70fcda4..b37122ab7e 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -13,10 +13,10 @@ variant = BB 0.8 [values] brim_replaces_support = False -cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) retraction_count_max = 5 -skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_brim_enable = True support_infill_sparse_thickness = 0.3 support_interface_enable = True +skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) +cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) support_use_towers = True diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg index c0e20f1584..0e738f1e3d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg index 8b3030ce09..e0d01ba82f 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFCPE_Fast_Print.inst.cfg @@ -7,7 +7,7 @@ definition = ultimaker_s5 setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_cffcpe variant = CC 0.4 @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg index 0307bbff4a..52d0a07ea5 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg index ac6883ca44..86dad3779b 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_CFFPA_Fast_Print.inst.cfg @@ -7,7 +7,7 @@ definition = ultimaker_s5 setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_cffpa variant = CC 0.4 @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg index c44b25bd94..da79e206cf 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg index a79662a65d..644b964c28 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFCPE_Fast_Print.inst.cfg @@ -7,7 +7,7 @@ definition = ultimaker_s5 setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_gffcpe variant = CC 0.4 @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg index ee1ac1ef7a..2977a497eb 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg index c0a4cb9a4a..a339098b6a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_GFFPA_Fast_Print.inst.cfg @@ -7,7 +7,7 @@ definition = ultimaker_s5 setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_gffpa variant = CC 0.4 @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg index ec88e11d72..16d916f56a 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Draft_Print.inst.cfg @@ -1,16 +1,17 @@ [general] version = 4 -name = Fast - Experimental +name = Fast definition = ultimaker_s5 [metadata] setting_version = 20 type = quality quality_type = draft -weight = -2 +weight = -3 material = generic_pla variant = CC 0.4 is_experimental = True + [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 @@ -26,7 +27,7 @@ prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg index 98da59afd9..80e101c1a6 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_PLA_Fast_Print.inst.cfg @@ -1,16 +1,17 @@ [general] version = 4 -name = Normal - Experimental +name = Normal definition = ultimaker_s5 [metadata] setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_pla variant = CC 0.4 is_experimental = True + [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 @@ -26,7 +27,7 @@ prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg index 02430694b3..dd2f4231c7 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFCPE_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg index ab1c73641e..eb2cc63b78 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_CFFPA_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg index e4019fea55..e5bc3d2e5b 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFCPE_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg index 2d45c63fcf..72e1c0f4fe 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_GFFPA_Draft_Print.inst.cfg @@ -24,3 +24,4 @@ skin_overlap = 20 support_bottom_distance = =support_z_distance / 2 support_top_distance = =support_z_distance support_z_distance = =layer_height * 2 + diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg index 0589c86926..af5bb5b9b2 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Draft_Print.inst.cfg @@ -1,16 +1,17 @@ [general] version = 4 -name = Fast - Experimental +name = Fast definition = ultimaker_s5 [metadata] setting_version = 20 type = quality quality_type = draft -weight = -2 +weight = -3 material = generic_pla variant = CC 0.6 is_experimental = True + [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 @@ -26,7 +27,7 @@ prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 top_bottom_thickness = =layer_height * 4 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg index fff2fdb4d2..e2dbe4a511 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_PLA_Fast_Print.inst.cfg @@ -1,16 +1,17 @@ [general] version = 4 -name = Normal - Experimental +name = Normal definition = ultimaker_s5 [metadata] setting_version = 20 type = quality quality_type = fast -weight = -1 +weight = -2 material = generic_pla variant = CC 0.6 is_experimental = True + [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height cool_fan_speed_max = =100 @@ -26,7 +27,7 @@ prime_tower_enable = True speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) -speed_wall_0 = =math.ceil(speed_wall * 35 / 40) speed_wall_x = =speed_wall +speed_wall_0 = =math.ceil(speed_wall * 35 / 40) support_angle = 70 top_bottom_thickness = =layer_height * 4 |