Modified raft settings: raft air gap, raft surface speed, speed layer 0

 Settings modified depending on the raft release experiemnets done for PLA, Nylon and ABS for AA0.4 print core for UMS3 and UMS5.

25 files changed, 68 insertions, 0 deletions

diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
index 5af2c40926..08a27aa3b4 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
@@ -33,3 +33,6 @@ switch_extruder_prime_speed = 30
 switch_extruder_retraction_amount = 30
 switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width
+raft_airgap = 0.4
+raft_surface_speed = 45
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
index 176e4702d2..9a8ed386c0 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
@@ -29,3 +29,5 @@ wall_thickness = 1
 infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 50 / 60)
 
+raft_airgap = 0.15
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg
index 4a9895fa32..615e8cc487 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg
@@ -28,3 +28,5 @@ speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 45 / 60)
 
+raft_airgap = 0.15
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg
index dcc3dfd74f..10149781cb 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg
@@ -27,3 +27,5 @@ speed_wall = =math.ceil(speed_print * 30 / 50)
 infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 40 / 50)
 
+raft_airgap = 0.15
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg
index 9147a3d016..137a316f14 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg
@@ -25,3 +25,6 @@ speed_wall = =math.ceil(speed_print * 30 / 55)
 
 infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 40 / 55)
+
+raft_airgap = 0.15
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
index 6f30adfb11..f98d5c5d70 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -36,3 +36,7 @@ switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width
 
 jerk_travel = 50
+
+raft_airgap = 0.4
+raft_surface_speed = 45
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
index a564797074..9e4d40bcf3 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -36,3 +36,7 @@ switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width
 
 jerk_travel = 50
+
+raft_airgap = 0.4
+raft_surface_speed = 45
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
index 5198470ba0..755127b66f 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
@@ -35,3 +35,7 @@ switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width
 
 jerk_travel = 50
+
+raft_airgap = 0.4
+raft_surface_speed = 45
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
index f77a5a9ed6..26f0b52f91 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -35,3 +35,7 @@ switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width
 
 jerk_travel = 50
+
+raft_airgap = 0.4
+raft_surface_speed = 45
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
index dd38f2b03b..c5613e0f49 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
@@ -33,3 +33,6 @@ infill_sparse_density = 15
 layer_height_0 = 0.2
 acceleration_wall = 2000
 acceleration_wall_0 = 2000
+
+raft_airgap = 0.25
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
index de774b6dbd..17967f923c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
@@ -29,3 +29,6 @@ wall_thickness = 1
 jerk_travel = 50
 infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2
+
+raft_airgap = 0.25
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
index 471d65228d..1c271f6af1 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
@@ -31,3 +31,6 @@ wall_thickness = 1
 jerk_travel = 50
 infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2
+
+raft_airgap = 0.25
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
index d715e2ec5c..0aae33c115 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -27,3 +27,6 @@ wall_thickness = 1
 jerk_travel = 50
 infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2
+
+raft_airgap = 0.25
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg
index 3b84cf57b8..193e6de18b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Draft_Print.inst.cfg
@@ -29,3 +29,5 @@ wall_thickness = 1
 infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 50 / 60)
 
+raft_airgap = 0.15
+speed_layer_0 = 10
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg
index a56178ad56..1aae14fe6b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Fast_Print.inst.cfg
@@ -28,3 +28,5 @@ speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 45 / 60)
 
+raft_airgap = 0.15
+speed_layer_0 = 10
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg
index 9170163af1..1c57587309 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_High_Quality.inst.cfg
@@ -27,3 +27,5 @@ speed_wall = =math.ceil(speed_print * 30 / 50)
 infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 40 / 50)
 
+raft_airgap = 0.15
+speed_layer_0 = 10
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg
index 8583d7c303..ec2819cf93 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_ABS_Normal_Quality.inst.cfg
@@ -25,3 +25,5 @@ speed_wall = =math.ceil(speed_print * 30 / 55)
 
 infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 speed_infill = =math.ceil(speed_print * 40 / 55)
+raft_airgap = 0.15
+speed_layer_0 = 10
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
index 8713b20062..0f1f2c872b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Draft_Print.inst.cfg
@@ -36,3 +36,6 @@ switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width
 
 jerk_travel = 50
+raft_airgap = 0.4
+raft_surface_speed = 45
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
index a83d8d320b..d3e3e43830 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Fast_Print.inst.cfg
@@ -36,3 +36,6 @@ switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width
 
 jerk_travel = 50
+raft_airgap = 0.4
+raft_surface_speed = 45
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
index c764ee1eeb..4a838d3b02 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_High_Quality.inst.cfg
@@ -35,3 +35,6 @@ switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width
 
 jerk_travel = 50
+raft_airgap = 0.4
+raft_surface_speed = 45
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
index 07c4e5a93e..8c86a63b0b 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_Nylon_Normal_Quality.inst.cfg
@@ -35,3 +35,6 @@ switch_extruder_retraction_speeds = 40
 wall_line_width_x = =wall_line_width
 
 jerk_travel = 50
+raft_airgap = 0.4
+raft_surface_speed = 45
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
index a9a94ddc89..25235ba336 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Draft_Print.inst.cfg
@@ -34,3 +34,5 @@ infill_sparse_density = 15
 layer_height_0 = 0.2
 acceleration_wall = 2000
 acceleration_wall_0 = 2000
+raft_airgap = 0.25
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
index f906c79923..f9ed0bc62a 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Fast_Print.inst.cfg
@@ -29,3 +29,5 @@ wall_thickness = 1
 jerk_travel = 50
 infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2
+raft_airgap = 0.25
+speed_layer_0 = 10
\ No newline at end of file
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
index d11ad7b86e..23042d0f23 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_High_Quality.inst.cfg
@@ -31,3 +31,5 @@ wall_thickness = 1
 jerk_travel = 50
 infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2
+raft_airgap = 0.25
+speed_layer_0 = 10
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
index ad3c100fad..c0414898af 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PLA_Normal_Quality.inst.cfg
@@ -27,3 +27,5 @@ wall_thickness = 1
 jerk_travel = 50
 infill_line_width = =round(line_width * 0.42 / 0.35, 2)
 layer_height_0 = 0.2
+raft_airgap = 0.25
+speed_layer_0 = 10