Fixed typo: positionning -> positioning

8 files changed, 11 insertions, 11 deletions

diff --git a/resources/definitions/SV01.def.json b/resources/definitions/SV01.def.json
index 02347a8e3b..439ced7d38 100644
--- a/resources/definitions/SV01.def.json
+++ b/resources/definitions/SV01.def.json
@@ -65,6 +65,6 @@
         "retraction_speed": { "default_value": 50},

         "adhesion_type": { "value": "'skirt'" },

         "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },

-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" }

+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" }

     }

-}
\ No newline at end of file
+}

diff --git a/resources/definitions/anycubic_mega_zero.def.json b/resources/definitions/anycubic_mega_zero.def.json
index a17fddc4b4..b0c3132858 100644
--- a/resources/definitions/anycubic_mega_zero.def.json
+++ b/resources/definitions/anycubic_mega_zero.def.json
@@ -59,7 +59,7 @@
         },
         "machine_end_gcode":
         {
-            "default_value": "M117 Cooling down...\nM104 S0 ; turn off extruder\nM84 ; disable motors\nM107 ; Fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n"
+            "default_value": "M117 Cooling down...\nM104 S0 ; turn off extruder\nM84 ; disable motors\nM107 ; Fan off\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positioning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n"
         },
         "machine_max_feedrate_x": { "value": 500 },
         "machine_max_feedrate_y": { "value": 500 },
diff --git a/resources/definitions/biqu_base.def.json b/resources/definitions/biqu_base.def.json
index 1077b864b8..6beaa3b7a8 100755
--- a/resources/definitions/biqu_base.def.json
+++ b/resources/definitions/biqu_base.def.json
@@ -25,7 +25,7 @@
     "overrides": {
         "machine_name": { "default_value": "BIQU Base Printer" },
         "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
-        "machine_end_gcode": { "default_value": "                               ;BIQU Default End Gcode\nG91                            ;Relative positioning\nG1 E-2 F2700                   ;Retract a bit\nG1 E-2 Z0.2 F2400              ;Retract a bit more and raise Z\nG1 X5 Y5 F3000                 ;Wipe out\nG1 Z10                         ;Raise Z by 10mm\nG90                            ;Return to absolute positionning\n\nG1 X0 Y{machine_depth}         ;TaDaaaa\nM106 S0                        ;Turn-off fan\nM104 S0                        ;Turn-off hotend\nM140 S0                        ;Turn-off bed\n\nM84 X Y E                      ;Disable all steppers but Z\n" },
+        "machine_end_gcode": { "default_value": "                               ;BIQU Default End Gcode\nG91                            ;Relative positioning\nG1 E-2 F2700                   ;Retract a bit\nG1 E-2 Z0.2 F2400              ;Retract a bit more and raise Z\nG1 X5 Y5 F3000                 ;Wipe out\nG1 Z10                         ;Raise Z by 10mm\nG90                            ;Return to absolute positioning\n\nG1 X0 Y{machine_depth}         ;TaDaaaa\nM106 S0                        ;Turn-off fan\nM104 S0                        ;Turn-off hotend\nM140 S0                        ;Turn-off bed\n\nM84 X Y E                      ;Disable all steppers but Z\n" },
 
         "machine_max_feedrate_x": { "value": 500 },
         "machine_max_feedrate_y": { "value": 500 },
diff --git a/resources/definitions/creality_base.def.json b/resources/definitions/creality_base.def.json
index b56d2b7c06..892a0f9276 100644
--- a/resources/definitions/creality_base.def.json
+++ b/resources/definitions/creality_base.def.json
@@ -125,7 +125,7 @@
     "overrides": {
         "machine_name": { "default_value": "Creawsome Base Printer" },
         "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
 
         "machine_max_feedrate_x": { "value": 500 },
         "machine_max_feedrate_y": { "value": 500 },
diff --git a/resources/definitions/creality_ender5.def.json b/resources/definitions/creality_ender5.def.json
index 1b4be4d71f..896f532c81 100644
--- a/resources/definitions/creality_ender5.def.json
+++ b/resources/definitions/creality_ender5.def.json
@@ -4,7 +4,7 @@
     "inherits": "creality_base",
     "overrides": {
         "machine_name": { "default_value": "Creality Ender-5" },
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
         "machine_width": { "default_value": 220 },
         "machine_depth": { "default_value": 220 },
         "machine_height": { "default_value": 300 },
@@ -25,4 +25,4 @@
         "quality_definition": "creality_base",
         "visible": true
     }
-}
\ No newline at end of file
+}
diff --git a/resources/definitions/flyingbear_base.def.json b/resources/definitions/flyingbear_base.def.json
index 79a0b6ea89..7205e25be4 100644
--- a/resources/definitions/flyingbear_base.def.json
+++ b/resources/definitions/flyingbear_base.def.json
@@ -152,7 +152,7 @@
 
         "machine_start_gcode": { "default_value": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\n;Code for nozzle cleaning and flow normalization\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.4 Y20 Z0.28 F5000.0\nG1 X10.4 Y170.0 Z0.28 F1500.0 E15\nG1 X10.1 Y170.0 Z0.28 F5000.0\nG1 X10.1 Y40 Z0.28 F1500.0 E30\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up" },
 
-        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract the filament\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG28 X0 Y0 ;Home X and Y\n\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z" },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract the filament\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG28 X0 Y0 ;Home X and Y\n\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z" },
 
         "machine_heated_bed": { "default_value": true },
         "machine_shape": { "default_value": "rectangular" },
@@ -256,4 +256,4 @@
         "adaptive_layer_height_variation": { "value": 0.04 },
         "adaptive_layer_height_variation_step": { "value": 0.04 }
    }
-}
\ No newline at end of file
+}
diff --git a/resources/definitions/lotmaxx_sc60.def.json b/resources/definitions/lotmaxx_sc60.def.json
index abbf68d75a..a18e197757 100644
--- a/resources/definitions/lotmaxx_sc60.def.json
+++ b/resources/definitions/lotmaxx_sc60.def.json
@@ -20,7 +20,7 @@
           "default_value":"G28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"
         },
         "machine_end_gcode":{
-          "default_value":"G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n"
+          "default_value":"G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n"
         },
         "acceleration_print":{"value":1000},
         "acceleration_travel":{"value":1000},
diff --git a/resources/definitions/twotrees_bluer.def.json b/resources/definitions/twotrees_bluer.def.json
index a272527e6e..8cf7d804cf 100644
--- a/resources/definitions/twotrees_bluer.def.json
+++ b/resources/definitions/twotrees_bluer.def.json
@@ -30,7 +30,7 @@
 			]
 		},
 		"machine_start_gcode": { "default_value": "; Two Trees Bluer Custom Start G-code\nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG1 E10 F1500 ;Purge a bit\nG1 X10.1 Y20 Z0.2 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.2 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.2 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.2 F1500.0 E20 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z3.0 X20 Y20 F3000 ;Move Z Axis up\nG1 E3 F2700 ;Purge a bit"	},
-		"machine_end_gcode": { "default_value": "; Two Trees Bluer Custom End G-code\nG91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
+		"machine_end_gcode": { "default_value": "; Two Trees Bluer Custom End G-code\nG91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
 		"gantry_height": { "value": 25 }
 	}
 }