Fix minor issues found through PoEdit

CURA-7782

2 files changed, 264 insertions, 547 deletions

diff --git a/resources/i18n/ko_KR/cura.po b/resources/i18n/ko_KR/cura.po
index 9ae9f1a71d..31c687c231 100644
--- a/resources/i18n/ko_KR/cura.po
+++ b/resources/i18n/ko_KR/cura.po
@@ -7,7 +7,7 @@ msgstr ""
 "Project-Id-Version: Cura 4.8\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
 "POT-Creation-Date: 2020-10-19 13:15+0200\n"
-"PO-Revision-Date: 2020-08-21 13:40+0200\n"
+"PO-Revision-Date: 2020-11-09 14:08+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Korean <info@lionbridge.com>, Jinbum Kim <Jinbuhm.Kim@gmail.com>, Korean <info@bothof.nl>\n"
 "Language: ko_KR\n"
@@ -15,14 +15,10 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Poedit 2.2.4\n"
+"X-Generator: Poedit 2.4.1\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
 msgctxt "@label"
 msgid "Unknown"
 msgstr "알 수 없는"
@@ -46,47 +42,39 @@ msgstr "재정의되지 않음"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "정말로 {}을(를) 제거하시겠습니까? 이 작업을 실행 취소할 수 없습니다."
+msgstr "정말로 {0}을(를) 제거하시겠습니까? 이 작업을 실행 취소할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
 msgctxt "@label"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
 msgctxt "@label"
 msgid "Visual"
 msgstr "뛰어난 외관"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
 msgctxt "@text"
 msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
 msgstr "시각적 프로파일은 높은 시각적 및 표면 품질의 의도를 지니고 시각적 프로토타입과 모델을 인쇄하기 위해 설계되었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
 msgid "Engineering"
 msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
 msgctxt "@text"
 msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
 msgstr "엔지니어링 프로파일은 정확도를 개선하고 허용 오차를 좁히려는 의도로 기능 프로토타입 및 최종 사용 부품을 인쇄하도록 설계되었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
 msgid "Draft"
 msgstr "초안"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
 msgctxt "@text"
 msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
 msgstr "초안 프로파일은 인쇄 시간을 상당히 줄이려는 의도로 초기 프로토타입과 컨셉트 확인을 인쇄하도록 설계되었습니다."
@@ -96,8 +84,7 @@ msgctxt "@label"
 msgid "Custom Material"
 msgstr "사용자 정의 소재"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "사용자 정의"
@@ -123,27 +110,22 @@ msgctxt "@info:title"
 msgid "Login failed"
 msgstr "로그인 실패"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
 msgctxt "@info:status"
 msgid "Finding new location for objects"
 msgstr "객체의 새 위치 찾기"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
 msgid "Finding Location"
 msgstr "위치 찾기"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
 msgctxt "@info:status"
 msgid "Unable to find a location within the build volume for all objects"
 msgstr "모든 개체가 출력할 수 있는 최대 사이즈 내에 위치할 수 없습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
 msgid "Can't Find Location"
 msgstr "위치를 찾을 수 없음"
@@ -153,9 +135,7 @@ msgctxt "@info:backup_failed"
 msgid "Could not create archive from user data directory: {}"
 msgstr "사용자 데이터 디렉터리에서 압축 파일을 만들 수 없습니다: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
 msgid "Backup"
 msgstr "백업"
@@ -371,11 +351,8 @@ msgctxt "@info:status"
 msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
 msgstr "한 번에 하나의 G-코드 파일만 로드 할 수 있습니다. {0} 가져 오기를 건너 뛰었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 msgctxt "@info:title"
 msgid "Warning"
 msgstr "경고"
@@ -386,9 +363,7 @@ msgctxt "@info:status"
 msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
 msgstr "G-코드가 로드되어 있으면 다른 파일을 열 수 없습니다. {0} 가져 오기를 건너 뛰었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
 msgctxt "@info:title"
 msgid "Error"
@@ -439,21 +414,18 @@ msgctxt "@info"
 msgid "Unable to reach the Ultimaker account server."
 msgstr "Ultimaker 계정 서버에 도달할 수 없음."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "파일이 이미 있습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "파일 <filename>{0}</filename>이 이미 있습니다. 덮어 쓰시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "유효하지 않은 파일 URL:"
@@ -505,8 +477,7 @@ msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "<filename>{0}</filename>에서 프로파일을 가져오지 못했습니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
@@ -578,8 +549,7 @@ msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
 msgctxt "@label"
 msgid "Nozzle"
 msgstr "노즐"
@@ -599,30 +569,20 @@ msgctxt "@info:title"
 msgid "Extruder(s) Disabled"
 msgstr "익스트루더 비활성화됨"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
 msgid "Add"
 msgstr "추가"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
 msgctxt "@action:button"
 msgid "Finish"
 msgstr "종료"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
 msgid "Cancel"
 msgstr "취소"
@@ -698,12 +658,8 @@ msgctxt "@action:button"
 msgid "Next"
 msgstr "다음"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
 msgid "Close"
 msgstr "닫기"
@@ -765,8 +721,7 @@ msgctxt "@title:tab"
 msgid "Custom"
 msgstr "사용자 정의"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
 msgid "3MF File"
 msgstr "3MF 파일"
@@ -776,8 +731,7 @@ msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "3MF 기록기 플러그인이 손상되었습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "여기서 작업 환경을 작성할 권한이 없습니다."
@@ -842,8 +796,7 @@ msgctxt "@error:file_size"
 msgid "The backup exceeds the maximum file size."
 msgstr "백업이 최대 파일 크기를 초과했습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
 msgctxt "@info:backup_status"
 msgid "There was an error trying to restore your backup."
 msgstr "백업 복원 시도 중 오류가 있었습니다."
@@ -858,12 +811,8 @@ msgctxt "@info:status"
 msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
 msgstr "선택한 소재 또는 구성과 호환되지 않기 때문에 현재 소재로 슬라이스 할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
 msgctxt "@info:title"
 msgid "Unable to slice"
 msgstr "슬라이스 할 수 없습니다"
@@ -904,8 +853,7 @@ msgstr ""
 "- 활성화된 익스트루더로 할당됨\n"
 "- 수정자 메쉬로 전체 설정되지 않음"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
 msgid "Processing Layers"
 msgstr "레이어 처리 중"
@@ -915,8 +863,7 @@ msgctxt "@info:title"
 msgid "Information"
 msgstr "정보"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
 msgctxt "@item:inlistbox"
 msgid "Cura Profile"
 msgstr "Cura 프로파일"
@@ -948,8 +895,7 @@ msgctxt "@action"
 msgid "Update Firmware"
 msgstr "펌웨어 업데이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
 msgctxt "@item:inlistbox"
 msgid "Compressed G-code File"
 msgstr "압축된 G-code 파일"
@@ -959,9 +905,7 @@ msgctxt "@error:not supported"
 msgid "GCodeGzWriter does not support text mode."
 msgstr "GCodeGzWriter는 텍스트 모드는 지원하지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
 msgctxt "@item:inlistbox"
 msgid "G-code File"
 msgstr "G-code 파일"
@@ -971,8 +915,7 @@ msgctxt "@info:status"
 msgid "Parsing G-code"
 msgstr "G 코드 파싱"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
 msgctxt "@info:title"
 msgid "G-code Details"
 msgstr "G-코드 세부 정보"
@@ -992,8 +935,7 @@ msgctxt "@error:not supported"
 msgid "GCodeWriter does not support non-text mode."
 msgstr "GCodeWriter는 텍스트가 아닌 모드는 지원하지 않습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
 msgctxt "@warning:status"
 msgid "Please prepare G-code before exporting."
 msgstr "내보내기 전에 G-code를 준비하십시오."
@@ -1079,8 +1021,7 @@ msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "이동식 드라이브  {0}에 저장"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "쓸 수있는 파일 형식이 없습니다!"
@@ -1096,8 +1037,7 @@ msgctxt "@info:title"
 msgid "Saving"
 msgstr "저장"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
@@ -1109,8 +1049,7 @@ msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "{device} 장치에 쓸 때 파일 이름을 찾을 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
@@ -1180,8 +1119,7 @@ msgctxt "@info:title"
 msgid "No layers to show"
 msgstr "표시할 레이어 없음"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
 msgctxt "@info:option_text"
 msgid "Do not show this message again"
 msgstr "다시 메시지 표시 안 함"
@@ -1221,8 +1159,7 @@ msgctxt "@info:generic"
 msgid "Do you want to sync material and software packages with your account?"
 msgstr "귀하의 계정으로 재료와 소프트웨어 패키지를 동기화하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
 msgctxt "@info:title"
 msgid "Changes detected from your Ultimaker account"
 msgstr "Ultimaker 계정에서 변경 사항이 감지되었습니다"
@@ -1242,8 +1179,7 @@ msgctxt "@button"
 msgid "Decline"
 msgstr "거절"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "동의"
@@ -1298,8 +1234,7 @@ msgctxt "@item:inlistbox"
 msgid "Compressed COLLADA Digital Asset Exchange"
 msgstr "Compressed COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
 msgid "Ultimaker Format Package"
 msgstr "Ultimaker 포맷 패키지"
@@ -1350,14 +1285,14 @@ msgstr[0] "Ultimaker 계정에서 새 프린터가 감지되었습니다"
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
-msgstr "사용자 계정에서 프린터 {}({model}) 추가"
+msgstr "사용자 계정에서 프린터 {name}({model}) 추가"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
 msgid_plural "... and {0} others"
-msgstr[0] "... 및 기타 {}"
+msgstr[0] "... 및 기타 {0}"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
@@ -1376,8 +1311,7 @@ msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "다음 프린터는 Digital Factory에 연결되어 있지 않습니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
@@ -1430,14 +1364,18 @@ msgid ""
 msgid_plural ""
 "You are about to remove {0} printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr[0] "Cura에서 {0} 프린터를 제거하려고 합니다. 이 작업은 실행 취소할 수 없습니다. \n정말로 계속하시겠습니까?"
+msgstr[0] ""
+"Cura에서 {0} 프린터를 제거하려고 합니다. 이 작업은 실행 취소할 수 없습니다. \n"
+"정말로 계속하시겠습니까?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr "Cura에서 모든 프린터를 제거하려고 합니다. 이 작업은 실행 취소할 수 없습니다. \n정말로 계속하시겠습니까?"
+msgstr ""
+"Cura에서 모든 프린터를 제거하려고 합니다. 이 작업은 실행 취소할 수 없습니다. \n"
+"정말로 계속하시겠습니까?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1636,14 +1574,12 @@ msgctxt "@action:ComboBox Save settings in a new profile"
 msgid "Create new"
 msgstr "새로 만들기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
 msgctxt "@action:title"
 msgid "Summary - Cura Project"
 msgstr "요약 - Cura 프로젝트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
 msgctxt "@action:label"
 msgid "Printer settings"
 msgstr "프린터 설정"
@@ -1653,20 +1589,17 @@ msgctxt "@info:tooltip"
 msgid "How should the conflict in the machine be resolved?"
 msgstr "기기의 충돌을 어떻게 해결해야합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
 msgctxt "@action:label"
 msgid "Type"
 msgstr "유형"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
 msgctxt "@action:label"
 msgid "Printer Group"
 msgstr "프린터 그룹"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
 msgctxt "@action:label"
 msgid "Profile settings"
 msgstr "프로파일 설정"
@@ -1676,28 +1609,23 @@ msgctxt "@info:tooltip"
 msgid "How should the conflict in the profile be resolved?"
 msgstr "프로파일의 충돌을 어떻게 해결해야합니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
 msgctxt "@action:label"
 msgid "Name"
 msgstr "이름"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
 msgctxt "@action:label"
 msgid "Intent"
 msgstr "Intent"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
 msgctxt "@action:label"
 msgid "Not in profile"
 msgstr "프로파일에 없음"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
 msgctxt "@action:label"
 msgid "%1 override"
 msgid_plural "%1 overrides"
@@ -1849,9 +1777,7 @@ msgctxt "@description"
 msgid "Backup and synchronize your Cura settings."
 msgstr "Cura 설정을 백업, 동기화하십시오."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
 msgctxt "@button"
 msgid "Sign in"
@@ -2002,8 +1928,7 @@ msgctxt "@item:inlistbox"
 msgid "Linear"
 msgstr "직선 모양"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
 msgctxt "@item:inlistbox"
 msgid "Translucency"
 msgstr "반투명성"
@@ -2028,9 +1953,7 @@ msgctxt "@action:label"
 msgid "Smoothing"
 msgstr "스무딩(smoothing)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
 msgctxt "@action:button"
 msgid "OK"
 msgstr "확인"
@@ -2050,18 +1973,10 @@ msgctxt "@label"
 msgid "Nozzle size"
 msgstr "노즐 크기"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
 msgid "mm"
 msgstr "mm"
@@ -2252,8 +2167,7 @@ msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "이 모델에 맞게 사용자 정의 설정을 선택하십시오"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "필터..."
@@ -2294,8 +2208,7 @@ msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "다음 스크립트들이 활성화됩니다:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
 msgid "Color scheme"
 msgstr "색 구성표"
@@ -2340,8 +2253,7 @@ msgctxt "@label"
 msgid "Shell"
 msgstr "외곽"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
 msgctxt "@label"
 msgid "Infill"
 msgstr "내부채움"
@@ -2446,8 +2358,7 @@ msgctxt "@action:label"
 msgid "Website"
 msgstr "웹 사이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
 msgctxt "@action:button"
 msgid "Installed"
 msgstr "설치됨"
@@ -2462,20 +2373,17 @@ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
 msgid "<a href='%1'>Buy material spools</a>"
 msgstr "<a href='%1'>재료 스플 구입</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
 msgctxt "@action:button"
 msgid "Update"
 msgstr "업데이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
 msgctxt "@action:button"
 msgid "Updating"
 msgstr "업데이트 중"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
 msgctxt "@action:button"
 msgid "Updated"
 msgstr "업데이트됨"
@@ -2485,8 +2393,7 @@ msgctxt "@label"
 msgid "Premium"
 msgstr "프리미엄"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
 msgctxt "@info:tooltip"
 msgid "Go to Web Marketplace"
 msgstr "웹 마켓플레이스로 이동"
@@ -2511,9 +2418,7 @@ msgctxt "@title:tab"
 msgid "Plugins"
 msgstr "플러그인"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
 msgctxt "@title:tab"
 msgid "Materials"
 msgstr "재료"
@@ -2558,9 +2463,7 @@ msgctxt "@button"
 msgid "Dismiss"
 msgstr "취소"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
 msgctxt "@button"
 msgid "Next"
 msgstr "다음 것"
@@ -2625,8 +2528,7 @@ msgctxt "@label"
 msgid "Last updated"
 msgstr "마지막으로 업데이트한 날짜"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
 msgid "Brand"
 msgstr "상표"
@@ -2756,9 +2658,7 @@ msgctxt "@action:button"
 msgid "Edit"
 msgstr "편집"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
@@ -2774,20 +2674,17 @@ msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "프린터가 목록에 없으면 네트워크 프린팅 문제 해결 가이드를 읽어보십시오"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "유형"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "펌웨어 버전"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "주소"
@@ -2817,8 +2714,7 @@ msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "잘못된 IP 주소"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "유효한 IP 주소를 입력하십시오."
@@ -2828,8 +2724,7 @@ msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "프린터 주소"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "네트워크에 있는 프린터의 IP 주소를 입력하십시오."
@@ -2880,8 +2775,7 @@ msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "무시하기는 기존 프린터 구성과 함께 지정된 설정을 사용하게 됩니다. 이는 인쇄 실패로 이어질 수 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
 msgctxt "@label"
 msgid "Glass"
@@ -2902,8 +2796,7 @@ msgctxt "@label"
 msgid "Delete"
 msgstr "삭제"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
 msgctxt "@label"
 msgid "Resume"
 msgstr "재개"
@@ -2918,9 +2811,7 @@ msgctxt "@label"
 msgid "Resuming..."
 msgstr "다시 시작..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
 msgctxt "@label"
 msgid "Pause"
 msgstr "중지"
@@ -2960,8 +2851,7 @@ msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "%1(을)를 정말로 중지하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "프린팅 중단"
@@ -2971,9 +2861,7 @@ msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "프린터 관리"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "대기열을 원격으로 관리하려면 프린터 펌웨어를 업데이트하십시오."
@@ -3033,20 +2921,17 @@ msgctxt "@label"
 msgid "First available"
 msgstr "첫 번째로 사용 가능"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
 msgctxt "@label:status"
 msgid "Aborted"
 msgstr "중단됨"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
 msgctxt "@label:status"
 msgid "Finished"
 msgstr "끝마친"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
 msgctxt "@label:status"
 msgid "Preparing..."
 msgstr "준비 중..."
@@ -3147,8 +3032,7 @@ msgstr ""
 "- 어디서든지 유연하게 설정을 동기화하고 로딩\n"
 "- Ultimaker 프린터에서 원격 워크플로로 효율성 증대"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
 msgctxt "@button"
 msgid "Create account"
 msgstr "계정 생성"
@@ -3481,8 +3365,7 @@ msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "설정 폴더 표시"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
 msgctxt "@action:menu"
 msgid "Configure setting visibility..."
 msgstr "설정 보기..."
@@ -3497,8 +3380,7 @@ msgctxt "@label"
 msgid "This package will be installed after restarting."
 msgstr "다시 시작한 후에 이 패키지가 설치됩니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
 msgctxt "@title:tab"
 msgid "General"
 msgstr "일반"
@@ -3508,14 +3390,12 @@ msgctxt "@title:tab"
 msgid "Settings"
 msgstr "설정"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
 msgctxt "@title:tab"
 msgid "Printers"
 msgstr "프린터"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
 msgctxt "@title:tab"
 msgid "Profiles"
 msgstr "프로파일"
@@ -3525,14 +3405,12 @@ msgctxt "@title:window %1 is the application name"
 msgid "Closing %1"
 msgstr "%1 닫기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
 msgctxt "@label %1 is the application name"
 msgid "Are you sure you want to exit %1?"
 msgstr "%1을(를) 정말로 종료하시겠습니까?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
 msgctxt "@title:window"
 msgid "Open file(s)"
 msgstr "파일 열기"
@@ -3686,8 +3564,7 @@ msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Python용 정적 유형 검사기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "SSL 신뢰성 검증용 루트 인증서"
@@ -3758,7 +3635,10 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr "일부 프로파일 설정을 사용자 정의했습니다.\n프로파일 전환 후에도 변경된 설정을 유지하시겠습니까?\n또는 변경 사항을 버리고 '%1'에서 기본값을 로드할 수 있습니다."
+msgstr ""
+"일부 프로파일 설정을 사용자 정의했습니다.\n"
+"프로파일 전환 후에도 변경된 설정을 유지하시겠습니까?\n"
+"또는 변경 사항을 버리고 '%1'에서 기본값을 로드할 수 있습니다."
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -3770,8 +3650,7 @@ msgctxt "@title:column"
 msgid "Current changes"
 msgstr "현재 변경 사항"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "항상 묻기"
@@ -3847,8 +3726,7 @@ msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "제목 없음"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
 msgctxt "@title:menu menubar:toplevel"
 msgid "&File"
 msgstr "파일"
@@ -3858,14 +3736,12 @@ msgctxt "@title:menu menubar:toplevel"
 msgid "&Edit"
 msgstr "편집(&E)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
 msgctxt "@title:menu menubar:toplevel"
 msgid "&View"
 msgstr "보기(&V)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
 msgctxt "@title:menu menubar:toplevel"
 msgid "&Settings"
 msgstr "설정"
@@ -4421,8 +4297,7 @@ msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "프로파일을 변경하고 다른 프로파일로 전환하면 수정 사항을 유지할지 여부를 묻는 대화 상자가 표시됩니다. 기본 행동을 선택하면 해당 대화 상자를 다시 표시 하지 않을 수 있습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
 msgctxt "@label"
 msgid "Profiles"
 msgstr "프로파일"
@@ -4472,15 +4347,12 @@ msgctxt "@action:button"
 msgid "More information"
 msgstr "추가 정보"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
 msgctxt "@action:button"
 msgid "Activate"
 msgstr "활성화"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
 msgctxt "@action:button"
 msgid "Rename"
 msgstr "이름 바꾸기"
@@ -4495,14 +4367,12 @@ msgctxt "@action:button"
 msgid "Duplicate"
 msgstr "복제"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
 msgctxt "@action:button"
 msgid "Import"
 msgstr "가져오기"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
 msgctxt "@action:button"
 msgid "Export"
 msgstr "내보내기"
@@ -4512,20 +4382,17 @@ msgctxt "@action:label"
 msgid "Printer"
 msgstr "프린터"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "제거 확인"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "%1을 제거 하시겠습니까? 이것은 취소 할 수 없습니다!"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
 msgctxt "@title:window"
 msgid "Import Material"
 msgstr "재료 가져 오기"
@@ -4540,8 +4407,7 @@ msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Successfully imported material <filename>%1</filename>"
 msgstr "재료를 성공적으로 가져왔습니다"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
 msgctxt "@title:window"
 msgid "Export Material"
 msgstr "재료 내보내기"
@@ -4641,8 +4507,7 @@ msgctxt "@label"
 msgid "Adhesion Information"
 msgstr "접착 정보"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
 msgctxt "@label"
 msgid "Print settings"
 msgstr "프린팅 설정"
@@ -4697,8 +4562,7 @@ msgctxt "@action:button"
 msgid "Update profile with current settings/overrides"
 msgstr "현재 설정 / 재정의 프로파일 업데이트"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
 msgctxt "@action:button"
 msgid "Discard current changes"
 msgstr "현재 변경 사항 삭제"
@@ -4773,14 +4637,12 @@ msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "노즐을 예열하기 위한 온도."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "취소"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "예열"
@@ -5250,8 +5112,7 @@ msgctxt "@label"
 msgid "Could not connect to device."
 msgstr "장치에 연결할 수 없습니다."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
 msgid "Can't connect to your Ultimaker printer?"
 msgstr "Ultimaker 프린터로 연결할 수 없습니까?"
diff --git a/resources/i18n/nl_NL/cura.po b/resources/i18n/nl_NL/cura.po
index dba66bb67d..d74aef776a 100644
--- a/resources/i18n/nl_NL/cura.po
+++ b/resources/i18n/nl_NL/cura.po
@@ -7,7 +7,7 @@ msgstr ""
 "Project-Id-Version: Cura 4.8\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
 "POT-Creation-Date: 2020-10-19 13:15+0200\n"
-"PO-Revision-Date: 2020-08-21 13:40+0200\n"
+"PO-Revision-Date: 2020-11-09 14:10+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Dutch <info@lionbridge.com>, Dutch <info@bothof.nl>\n"
 "Language: nl_NL\n"
@@ -15,14 +15,10 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
-"X-Generator: Poedit 2.3\n"
+"X-Generator: Poedit 2.4.1\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
 msgctxt "@label"
 msgid "Unknown"
 msgstr "Onbekend"
@@ -46,47 +42,39 @@ msgstr "Niet overschreven"
 #, python-brace-format
 msgctxt "@label {0} is the name of a printer that's about to be deleted."
 msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt."
+msgstr "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
 msgctxt "@label"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
 msgctxt "@label"
 msgid "Visual"
 msgstr "Visueel"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
 msgctxt "@text"
 msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
 msgstr "Het visuele profiel is ontworpen om visuele prototypen en modellen te printen met als doel een hoge visuele en oppervlaktekwaliteit te creëren."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
 msgctxt "@label"
 msgid "Engineering"
 msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
 msgctxt "@text"
 msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
 msgstr "Het engineeringprofiel is ontworpen om functionele prototypen en onderdelen voor eindgebruik te printen met als doel een grotere precisie en nauwere toleranties."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
 msgctxt "@label"
 msgid "Draft"
 msgstr "Ontwerp"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
 msgctxt "@text"
 msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
 msgstr "Het ontwerpprofiel is ontworpen om initiële prototypen en conceptvalidatie te printen met als doel de printtijd aanzienlijk te verkorten."
@@ -96,8 +84,7 @@ msgctxt "@label"
 msgid "Custom Material"
 msgstr "Aangepast materiaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Aangepast"
@@ -123,27 +110,22 @@ msgctxt "@info:title"
 msgid "Login failed"
 msgstr "Inloggen mislukt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
 msgctxt "@info:status"
 msgid "Finding new location for objects"
 msgstr "Nieuwe locatie vinden voor objecten"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
 msgid "Finding Location"
 msgstr "Locatie vinden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
 msgctxt "@info:status"
 msgid "Unable to find a location within the build volume for all objects"
 msgstr "Kan binnen het werkvolume niet voor alle objecten een locatie vinden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
 msgid "Can't Find Location"
 msgstr "Kan locatie niet vinden"
@@ -153,9 +135,7 @@ msgctxt "@info:backup_failed"
 msgid "Could not create archive from user data directory: {}"
 msgstr "Kan geen archief maken van gegevensmap van gebruiker: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
 msgid "Backup"
 msgstr "Back-up"
@@ -371,10 +351,7 @@ msgctxt "@info:status"
 msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
 msgstr "Er kan slechts één G-code-bestand tegelijkertijd worden geladen. Het importeren van {0} is overgeslagen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 msgctxt "@info:title"
 msgid "Warning"
@@ -386,10 +363,7 @@ msgctxt "@info:status"
 msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
 msgstr "Kan geen ander bestand openen als G-code wordt geladen. Het importeren van {0} is overgeslagen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
 msgctxt "@info:title"
 msgid "Error"
 msgstr "Fout"
@@ -439,21 +413,18 @@ msgctxt "@info"
 msgid "Unable to reach the Ultimaker account server."
 msgstr "Kan de Ultimaker-accountserver niet bereiken."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Het Bestand Bestaat Al"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Het bestand <filename>{0}</filename> bestaat al. Weet u zeker dat u dit bestand wilt overschrijven?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "Ongeldige bestands-URL:"
@@ -505,8 +476,7 @@ msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
@@ -566,8 +536,7 @@ msgstr "Kwaliteitstype '{0}' is niet compatibel met de huidige actieve machinede
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr "Waarschuwing: het profiel is niet zichtbaar omdat het kwaliteitstype '{0}' van het profiel niet beschikbaar is voor de huidige configuratie. Schakel naar"
-" een materiaal-nozzle-combinatie waarvoor dit kwaliteitstype geschikt is."
+msgstr "Waarschuwing: het profiel is niet zichtbaar omdat het kwaliteitstype '{0}' van het profiel niet beschikbaar is voor de huidige configuratie. Schakel naar een materiaal-nozzle-combinatie waarvoor dit kwaliteitstype geschikt is."
 
 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
@@ -579,8 +548,7 @@ msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
 msgctxt "@label"
 msgid "Nozzle"
 msgstr "Nozzle"
@@ -600,29 +568,19 @@ msgctxt "@info:title"
 msgid "Extruder(s) Disabled"
 msgstr "Extruder(s) uitgeschakeld"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
 msgid "Add"
 msgstr "Toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
 msgctxt "@action:button"
 msgid "Finish"
 msgstr "Voltooien"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
 msgid "Cancel"
@@ -699,12 +657,8 @@ msgctxt "@action:button"
 msgid "Next"
 msgstr "Volgende"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
 msgid "Close"
 msgstr "Sluiten"
@@ -766,8 +720,7 @@ msgctxt "@title:tab"
 msgid "Custom"
 msgstr "Aangepast"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
 msgid "3MF File"
 msgstr "3MF-bestand"
@@ -777,8 +730,7 @@ msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr "3MF-schrijverplug-in is beschadigd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr "Geen bevoegdheid om de werkruimte hier te schrijven."
@@ -843,8 +795,7 @@ msgctxt "@error:file_size"
 msgid "The backup exceeds the maximum file size."
 msgstr "De back-up is groter dan de maximale bestandsgrootte."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
 msgctxt "@info:backup_status"
 msgid "There was an error trying to restore your backup."
 msgstr "Er is een fout opgetreden tijdens het herstellen van uw back-up."
@@ -859,12 +810,8 @@ msgctxt "@info:status"
 msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
 msgstr "Met het huidige materiaal is slicen niet mogelijk, omdat het materiaal niet compatibel is met de geselecteerde machine of configuratie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
 msgctxt "@info:title"
 msgid "Unable to slice"
 msgstr "Kan niet slicen"
@@ -905,8 +852,7 @@ msgstr ""
 "- zijn toegewezen aan een ingeschakelde extruder\n"
 "- niet allemaal zijn ingesteld als modificatierasters"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
 msgid "Processing Layers"
 msgstr "Lagen verwerken"
@@ -916,8 +862,7 @@ msgctxt "@info:title"
 msgid "Information"
 msgstr "Informatie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
 msgctxt "@item:inlistbox"
 msgid "Cura Profile"
 msgstr "Cura-profiel"
@@ -949,8 +894,7 @@ msgctxt "@action"
 msgid "Update Firmware"
 msgstr "Firmware bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
 msgctxt "@item:inlistbox"
 msgid "Compressed G-code File"
 msgstr "Gecomprimeerd G-code-bestand"
@@ -960,9 +904,7 @@ msgctxt "@error:not supported"
 msgid "GCodeGzWriter does not support text mode."
 msgstr "GCodeGzWriter ondersteunt geen tekstmodus."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
 msgctxt "@item:inlistbox"
 msgid "G-code File"
 msgstr "G-code-bestand"
@@ -972,8 +914,7 @@ msgctxt "@info:status"
 msgid "Parsing G-code"
 msgstr "G-code parseren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
 msgctxt "@info:title"
 msgid "G-code Details"
 msgstr "Details van de G-code"
@@ -993,8 +934,7 @@ msgctxt "@error:not supported"
 msgid "GCodeWriter does not support non-text mode."
 msgstr "GCodeWriter ondersteunt geen non-tekstmodus."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
 msgctxt "@warning:status"
 msgid "Please prepare G-code before exporting."
 msgstr "Bereid voorafgaand aan het exporteren G-code voor."
@@ -1080,8 +1020,7 @@ msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Opslaan op Verwisselbaar Station {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Er zijn geen bestandsindelingen beschikbaar om te schrijven!"
@@ -1097,8 +1036,7 @@ msgctxt "@info:title"
 msgid "Saving"
 msgstr "Opslaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
@@ -1110,8 +1048,7 @@ msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Kan geen bestandsnaam vinden tijdens het schrijven naar {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
@@ -1181,8 +1118,7 @@ msgctxt "@info:title"
 msgid "No layers to show"
 msgstr "Geen lagen om weer te geven"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
 msgctxt "@info:option_text"
 msgid "Do not show this message again"
 msgstr "Dit bericht niet meer weergeven"
@@ -1222,8 +1158,7 @@ msgctxt "@info:generic"
 msgid "Do you want to sync material and software packages with your account?"
 msgstr "Wilt u materiaal- en softwarepackages synchroniseren met uw account?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
 msgctxt "@info:title"
 msgid "Changes detected from your Ultimaker account"
 msgstr "Wijzigingen gedetecteerd van uw Ultimaker-account"
@@ -1243,8 +1178,7 @@ msgctxt "@button"
 msgid "Decline"
 msgstr "Nee, ik ga niet akkoord"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Akkoord"
@@ -1299,8 +1233,7 @@ msgctxt "@item:inlistbox"
 msgid "Compressed COLLADA Digital Asset Exchange"
 msgstr "Gecomprimeerde COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
 msgid "Ultimaker Format Package"
 msgstr "Ultimaker Format Package"
@@ -1381,8 +1314,7 @@ msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Deze printer is niet gekoppeld aan de Digital Factory:"
 msgstr[1] "Deze printers zijn niet gekoppeld aan de Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
@@ -1435,15 +1367,21 @@ msgid ""
 msgid_plural ""
 "You are about to remove {0} printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr[0] "U staat op het punt om {0} printer uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\nWeet u zeker dat u door wilt gaan?"
-msgstr[1] "U staat op het punt om {0} printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\nWeet u zeker dat u door wilt gaan?"
+msgstr[0] ""
+"U staat op het punt om {0} printer uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n"
+"Weet u zeker dat u door wilt gaan?"
+msgstr[1] ""
+"U staat op het punt om {0} printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n"
+"Weet u zeker dat u door wilt gaan?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
 "Are you sure you want to continue?"
-msgstr "U staat op het punt om alle printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\nWeet u zeker dat u door wilt gaan?"
+msgstr ""
+"U staat op het punt om alle printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n"
+"Weet u zeker dat u door wilt gaan?"
 
 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
 msgctxt "@info:status"
@@ -1642,14 +1580,12 @@ msgctxt "@action:ComboBox Save settings in a new profile"
 msgid "Create new"
 msgstr "Nieuw maken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
 msgctxt "@action:title"
 msgid "Summary - Cura Project"
 msgstr "Samenvatting - Cura-project"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
 msgctxt "@action:label"
 msgid "Printer settings"
 msgstr "Printerinstellingen"
@@ -1659,20 +1595,17 @@ msgctxt "@info:tooltip"
 msgid "How should the conflict in the machine be resolved?"
 msgstr "Hoe dient het conflict in de machine te worden opgelost?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
 msgctxt "@action:label"
 msgid "Type"
 msgstr "Type"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
 msgctxt "@action:label"
 msgid "Printer Group"
 msgstr "Printergroep"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
 msgctxt "@action:label"
 msgid "Profile settings"
 msgstr "Profielinstellingen"
@@ -1682,28 +1615,22 @@ msgctxt "@info:tooltip"
 msgid "How should the conflict in the profile be resolved?"
 msgstr "Hoe dient het conflict in het profiel te worden opgelost?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
 msgctxt "@action:label"
 msgid "Name"
 msgstr "Naam"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
 msgctxt "@action:label"
 msgid "Intent"
 msgstr "Intent"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
 msgctxt "@action:label"
 msgid "Not in profile"
 msgstr "Niet in profiel"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
 msgctxt "@action:label"
 msgid "%1 override"
 msgid_plural "%1 overrides"
@@ -1857,10 +1784,7 @@ msgctxt "@description"
 msgid "Backup and synchronize your Cura settings."
 msgstr "Maak een back-up van uw Cura-instellingen en synchroniseer deze."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
 msgctxt "@button"
 msgid "Sign in"
 msgstr "Aanmelden"
@@ -2010,8 +1934,7 @@ msgctxt "@item:inlistbox"
 msgid "Linear"
 msgstr "Lineair"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
 msgctxt "@item:inlistbox"
 msgid "Translucency"
 msgstr "Doorschijnendheid"
@@ -2036,9 +1959,7 @@ msgctxt "@action:label"
 msgid "Smoothing"
 msgstr "Effenen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
 msgctxt "@action:button"
 msgid "OK"
 msgstr "OK"
@@ -2058,18 +1979,10 @@ msgctxt "@label"
 msgid "Nozzle size"
 msgstr "Maat nozzle"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
 msgid "mm"
 msgstr "mm"
@@ -2262,8 +2175,7 @@ msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Instellingen Selecteren om Dit Model Aan te Passen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filteren..."
@@ -2305,8 +2217,7 @@ msgid_plural "The following scripts are active:"
 msgstr[0] "Het volgende script is actief:"
 msgstr[1] "De volgende scripts zijn actief:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
 msgid "Color scheme"
 msgstr "Kleurenschema"
@@ -2351,8 +2262,7 @@ msgctxt "@label"
 msgid "Shell"
 msgstr "Shell"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
 msgctxt "@label"
 msgid "Infill"
 msgstr "Vulling"
@@ -2457,8 +2367,7 @@ msgctxt "@action:label"
 msgid "Website"
 msgstr "Website"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
 msgctxt "@action:button"
 msgid "Installed"
 msgstr "Geïnstalleerd"
@@ -2473,20 +2382,17 @@ msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
 msgid "<a href='%1'>Buy material spools</a>"
 msgstr "<a href='%1'>Materiaalspoelen kopen</a>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
 msgctxt "@action:button"
 msgid "Update"
 msgstr "Bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
 msgctxt "@action:button"
 msgid "Updating"
 msgstr "Bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
 msgctxt "@action:button"
 msgid "Updated"
 msgstr "Bijgewerkt"
@@ -2496,8 +2402,7 @@ msgctxt "@label"
 msgid "Premium"
 msgstr "Premium"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
 msgctxt "@info:tooltip"
 msgid "Go to Web Marketplace"
 msgstr "Ga naar Marketplace op internet"
@@ -2522,9 +2427,7 @@ msgctxt "@title:tab"
 msgid "Plugins"
 msgstr "Invoegtoepassingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
 msgctxt "@title:tab"
 msgid "Materials"
 msgstr "Materialen"
@@ -2569,9 +2472,7 @@ msgctxt "@button"
 msgid "Dismiss"
 msgstr "Verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
 msgctxt "@button"
 msgid "Next"
 msgstr "Volgende"
@@ -2636,8 +2537,7 @@ msgctxt "@label"
 msgid "Last updated"
 msgstr "Laatst bijgewerkt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
 msgctxt "@label"
 msgid "Brand"
 msgstr "Merk"
@@ -2767,10 +2667,7 @@ msgctxt "@action:button"
 msgid "Edit"
 msgstr "Bewerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Verwijderen"
@@ -2785,20 +2682,17 @@ msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Raadpleeg de <a href='%1'>handleiding voor probleemoplossing bij printen via het netwerk</a> als uw printer niet in de lijst wordt vermeld"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Type"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Firmwareversie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adres"
@@ -2828,8 +2722,7 @@ msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Ongeldig IP-adres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Voer een geldig IP-adres in."
@@ -2839,8 +2732,7 @@ msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Printeradres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Voer het IP-adres van uw printer in het netwerk in."
@@ -2892,9 +2784,7 @@ msgctxt "@label"
 msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
 msgstr "Met het overschrijven worden de opgegeven instellingen gebruikt met de bestaande printerconfiguratie. De print kan hierdoor mislukken."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
 msgctxt "@label"
 msgid "Glass"
 msgstr "Glas"
@@ -2914,8 +2804,7 @@ msgctxt "@label"
 msgid "Delete"
 msgstr "Verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
 msgctxt "@label"
 msgid "Resume"
 msgstr "Hervatten"
@@ -2930,9 +2819,7 @@ msgctxt "@label"
 msgid "Resuming..."
 msgstr "Hervatten..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pauzeren"
@@ -2972,8 +2859,7 @@ msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Weet u zeker dat u %1 wilt afbreken?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Printen afbreken"
@@ -2983,9 +2869,7 @@ msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Printer beheren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
 msgctxt "@info"
 msgid "Please update your printer's firmware to manage the queue remotely."
 msgstr "Werk de firmware van uw printer bij om de wachtrij op afstand te beheren."
@@ -3045,20 +2929,17 @@ msgctxt "@label"
 msgid "First available"
 msgstr "Eerst beschikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
 msgctxt "@label:status"
 msgid "Aborted"
 msgstr "Afgebroken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
 msgctxt "@label:status"
 msgid "Finished"
 msgstr "Gereed"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
 msgctxt "@label:status"
 msgid "Preparing..."
 msgstr "Voorbereiden..."
@@ -3159,8 +3040,7 @@ msgstr ""
 "- Blijf flexibel door uw instellingen te synchroniseren en overal te laden\n"
 "- Verhoog de efficiëntie met een externe workflow op Ultimaker-printers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
 msgctxt "@button"
 msgid "Create account"
 msgstr "Account maken"
@@ -3496,8 +3376,7 @@ msgctxt "@action:inmenu menubar:help"
 msgid "Show Configuration Folder"
 msgstr "Open Configuratiemap"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
 msgctxt "@action:menu"
 msgid "Configure setting visibility..."
 msgstr "Zichtbaarheid Instelling Configureren..."
@@ -3512,8 +3391,7 @@ msgctxt "@label"
 msgid "This package will be installed after restarting."
 msgstr "Dit package wordt na opnieuw starten geïnstalleerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
 msgctxt "@title:tab"
 msgid "General"
 msgstr "Algemeen"
@@ -3523,14 +3401,12 @@ msgctxt "@title:tab"
 msgid "Settings"
 msgstr "Instellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
 msgctxt "@title:tab"
 msgid "Printers"
 msgstr "Printers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
 msgctxt "@title:tab"
 msgid "Profiles"
 msgstr "Profielen"
@@ -3540,14 +3416,12 @@ msgctxt "@title:window %1 is the application name"
 msgid "Closing %1"
 msgstr "%1 wordt gesloten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
 msgctxt "@label %1 is the application name"
 msgid "Are you sure you want to exit %1?"
 msgstr "Weet u zeker dat u %1 wilt afsluiten?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
 msgctxt "@title:window"
 msgid "Open file(s)"
 msgstr "Bestand(en) openen"
@@ -3701,8 +3575,7 @@ msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Statische typecontrole voor Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Rootcertificaten voor het valideren van SSL-betrouwbaarheid"
@@ -3773,8 +3646,10 @@ msgid ""
 "You have customized some profile settings.\n"
 "Would you like to Keep these changed settings after switching profiles?\n"
 "Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr "U hebt enkele profielinstellingen aangepast.\nWilt u deze gewijzigde instellingen behouden na het verwisselen van profielen?\nU kunt de wijzigingen ook"
-" verwijderen om de standaardinstellingen van '%1' te laden."
+msgstr ""
+"U hebt enkele profielinstellingen aangepast.\n"
+"Wilt u deze gewijzigde instellingen behouden na het verwisselen van profielen?\n"
+"U kunt de wijzigingen ook verwijderen om de standaardinstellingen van '%1' te laden."
 
 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
 msgctxt "@title:column"
@@ -3786,8 +3661,7 @@ msgctxt "@title:column"
 msgid "Current changes"
 msgstr "Huidige wijzigingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
 msgctxt "@option:discardOrKeep"
 msgid "Always ask me this"
 msgstr "Altijd vragen"
@@ -3864,8 +3738,7 @@ msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Zonder titel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
 msgctxt "@title:menu menubar:toplevel"
 msgid "&File"
 msgstr "&Bestand"
@@ -3875,14 +3748,12 @@ msgctxt "@title:menu menubar:toplevel"
 msgid "&Edit"
 msgstr "B&ewerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
 msgctxt "@title:menu menubar:toplevel"
 msgid "&View"
 msgstr "Beel&d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
 msgctxt "@title:menu menubar:toplevel"
 msgid "&Settings"
 msgstr "In&stellingen"
@@ -4441,8 +4312,7 @@ msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Wanneer u wijzigingen hebt aangebracht aan een profiel en naar een ander profiel wisselt, wordt een dialoogvenster weergegeven waarin u wordt gevraagd of u de aanpassingen wilt behouden. U kunt ook een standaardgedrag kiezen en het dialoogvenster nooit meer laten weergeven."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
 msgctxt "@label"
 msgid "Profiles"
 msgstr "Profielen"
@@ -4492,15 +4362,12 @@ msgctxt "@action:button"
 msgid "More information"
 msgstr "Meer informatie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
 msgctxt "@action:button"
 msgid "Activate"
 msgstr "Activeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
 msgctxt "@action:button"
 msgid "Rename"
 msgstr "Hernoemen"
@@ -4515,14 +4382,12 @@ msgctxt "@action:button"
 msgid "Duplicate"
 msgstr "Dupliceren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
 msgctxt "@action:button"
 msgid "Import"
 msgstr "Importeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
 msgctxt "@action:button"
 msgid "Export"
 msgstr "Exporteren"
@@ -4532,20 +4397,17 @@ msgctxt "@action:label"
 msgid "Printer"
 msgstr "Printer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
 msgctxt "@title:window"
 msgid "Confirm Remove"
 msgstr "Verwijderen Bevestigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
 msgctxt "@label (%1 is object name)"
 msgid "Are you sure you wish to remove %1? This cannot be undone!"
 msgstr "Weet u zeker dat u %1 wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
 msgctxt "@title:window"
 msgid "Import Material"
 msgstr "Materiaal Importeren"
@@ -4560,8 +4422,7 @@ msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Successfully imported material <filename>%1</filename>"
 msgstr "Materiaal <filename>%1</filename> is geïmporteerd"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
 msgctxt "@title:window"
 msgid "Export Material"
 msgstr "Materiaal Exporteren"
@@ -4661,8 +4522,7 @@ msgctxt "@label"
 msgid "Adhesion Information"
 msgstr "Gegevens Hechting"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
 msgctxt "@label"
 msgid "Print settings"
 msgstr "Instellingen voor printen"
@@ -4717,8 +4577,7 @@ msgctxt "@action:button"
 msgid "Update profile with current settings/overrides"
 msgstr "Profiel bijwerken met huidige instellingen/overschrijvingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
 msgctxt "@action:button"
 msgid "Discard current changes"
 msgstr "Huidige wijzigingen verwijderen"
@@ -4793,14 +4652,12 @@ msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "De temperatuur waarnaar het hotend moet worden voorverwarmd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Annuleren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Voorverwarmen"
@@ -5271,8 +5128,7 @@ msgctxt "@label"
 msgid "Could not connect to device."
 msgstr "Kan geen verbinding maken met het apparaat."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
 msgid "Can't connect to your Ultimaker printer?"
 msgstr "Kunt u geen verbinding maken met uw Ultimaker-printer?"