Update many quickprint profiles - Fixes T219

Mostly priming tower and ooze shields turned on

31 files changed, 617 insertions, 54 deletions

diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
index 22f47b1056..163b9fb246 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -1,8 +1,8 @@
 [profile]
 layer_height = 0.25
-wall_thickness = 0.6
+wall_thickness = 1.2
 retraction_enable = True
-solid_layer_thickness = 0.75
+solid_layer_thickness = 1.25
 fill_density = 20
 perimeter_before_infill = True
 nozzle_size = 0.6
diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_meduim-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_meduim-quality_Mini_flexystruder-v2_0.6noz_cura.ini
new file mode 100644
index 0000000000..42139fffc8
--- /dev/null
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_meduim-quality_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -0,0 +1,299 @@
+[profile]
+layer_height = 0.325
+wall_thickness = 0.6
+retraction_enable = True
+solid_layer_thickness = 0.65
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.6
+print_speed = 50
+print_temperature = 222
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 40
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 100
+retraction_speed = 10
+retraction_amount = 3
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.4
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 8
+infill_speed = 18
+solidarea_speed = 18
+inset0_speed = 12
+insetx_speed = 16
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+simplemodesettings = 
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+
+[alterations]
+start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Filament Diameter: {filament_diameter}
+	;Nozzle Size: {nozzle_size}
+	G21                          ; metric values
+	G90                          ; absolute positioning
+	M82                          ; set extruder to absolute mode
+	M107                         ; start with the fan off
+	G92 E0                       ; set extruder position to 0
+	M140 S{print_bed_temperature}; get bed heating up
+	G28                          ; home all
+	M109 S160                    ; set to cleaning temp and wait
+	G1 Z150 E-30 F75             ; suck up XXmm of filament
+	M109 S170                    ; heat up rest of way
+	G1 X45 Y174 F11520           ; move behind scraper
+	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
+	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
+	G1 X55 Y172 Z-.5 F4000       ; wiping
+	G1 X45 Y174 Z0 F4000         ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X45 Y174 F4000            ; wiping
+	G1 X55 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X80 Y172 F4000            ; wiping
+	G1 X60 Y174 F4000            ; wiping
+	G1 X90 Y172 F4000            ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X80 Y174 F4000            ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X100 Y172 F4000           ; wiping
+	G1 X110 Y174 F4000           ; wiping
+	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
+	G1 Z10                       ; raise z
+	G28 X0 Y0                    ; home x and y
+	M109 S180                    ; set to probing temp
+	M204 S300                    ; Set probing acceleration
+	G29                          ; Probe
+	M204 S2000                   ; Restore standard acceleration
+	G1 X5 Y15 Z10 F5000          ; get out the way
+	G4 S1                        ; pause
+	M400                         ; clear buffer
+	M109 S{print_temperature}    ; set extruder temp and wait
+	G4 S15                       ; wait for bed to temp up
+	G1 Z2 E0 F75                 ; extrude filament back into nozzle
+	M140 S{print_bed_temperature}; get bed temping up during first layer
+end.gcode = 
+	M400
+	M104 S0                                      ; hotend off
+	M140 S0                                      ; heated bed heater off (if you have it)
+	M107                                         ; fans off
+	G92 E5                                       ; set extruder to 5mm for retract on print end
+	G1 X5 Y5 Z156 E0 F10000                      ; move to cooling positioning
+	M190 R50                                     ; wait for bed to cool
+	M104 S0                                      ;
+	G1 X145 Y175 Z156 F1000                      ; move to cooling positioning
+	M84                                          ; steppers off
+	G90                                          ; absolute positioning
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+
diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
index a416282a2b..4ac7c68249 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-quality_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -24,7 +24,7 @@ filament_diameter2 = 0
 filament_diameter3 = 0
 filament_diameter4 = 0
 filament_diameter5 = 0
-filament_flow = 110
+filament_flow = 100
 retraction_speed = 10
 retraction_amount = 3
 retraction_dual_amount = 16.5
diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
index 226c15fdcd..e3cf0149cb 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_high-speed_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -24,7 +24,7 @@ filament_diameter2 = 0
 filament_diameter3 = 0
 filament_diameter4 = 0
 filament_diameter5 = 0
-filament_flow = 110
+filament_flow = 100
 retraction_speed = 10
 retraction_amount = 3
 retraction_dual_amount = 16.5
diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
index 60cd97f3e3..f0697c792a 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/semiflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
@@ -24,7 +24,7 @@ filament_diameter2 = 0
 filament_diameter3 = 0
 filament_diameter4 = 0
 filament_diameter5 = 0
-filament_flow = 110
+filament_flow = 100
 retraction_speed = 10
 retraction_amount = 3
 retraction_dual_amount = 16.5
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/ABS_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/ABS_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
index dafa9d0faa..1d70e1ea90 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/ABS_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/ABS_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 0
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
index 48d0d0e22f..f9523f6fa3 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Everywhere
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
index 3549c0e4a7..37913fddde 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index c26e42c849..fce767914b 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 0
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
index 4b44f50659..bc2e50644a 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
@@ -16,7 +16,7 @@ print_bed_temperature = 0
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
-wipe_tower = False
+wipe_tower = True
 wipe_tower_volume = 15
 ooze_shield = True
 filament_diameter = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index d888aa8dda..1c6c0bd6a0 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 0
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index 91825bca63..dcb7a7e39e 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Everywhere
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
index db0187ab3b..f6079ccfc8 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Everywhere
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index 49d7b03feb..bbecad4b37 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Everywhere
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index 47dfa3055c..f222cd9f91 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
index 624699541d..1f48ace905 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index 2052727701..a2cafa59ae 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PP-conductive-PLA_PLA_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PP-conductive-PLA_PLA_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
index 42d7ac0159..411522de3c 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PP-conductive-PLA_PLA_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PP-conductive-PLA_PLA_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Everywhere
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
index 3bd213a839..32f7b7807a 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Touching buildplate
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 150
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_semiflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_semiflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
index 042b7a518f..f03b372340 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_semiflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_semiflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Touching buildplate
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 150
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/PLA_PVA_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/PLA_PVA_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
index 3c4802513f..60ad795bee 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/PLA_PVA_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/PLA_PVA_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Everywhere
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
index 6f2dcbdcf3..01682443f8 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
@@ -17,8 +17,8 @@ support = Touching buildplate
 platform_adhesion = None
 support_dual_extrusion = Second extruder
 wipe_tower = True
-wipe_tower_volume = 150
-ooze_shield = False
+wipe_tower_volume = 25
+ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
 filament_diameter3 = 0
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index a4e60cf30c..d8b7ad157a 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Touching buildplate
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 150
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index 698fe7bb86..5ac65bf5cb 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Touching buildplate
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 150
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
index 6f2dcbdcf3..01682443f8 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
@@ -17,8 +17,8 @@ support = Touching buildplate
 platform_adhesion = None
 support_dual_extrusion = Second extruder
 wipe_tower = True
-wipe_tower_volume = 150
-ooze_shield = False
+wipe_tower_volume = 25
+ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
 filament_diameter3 = 0
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index a4e60cf30c..d8b7ad157a 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Touching buildplate
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 150
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index 698fe7bb86..5ac65bf5cb 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Touching buildplate
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 150
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_high-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_high-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index e5ec8a8e3d..092234f9ee 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_high-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_high-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Everywhere
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
index 9188b7274e..fc2d68e712 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Everywhere
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index 631a6b22f0..d82eb224d0 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
@@ -16,8 +16,8 @@ print_bed_temperature = 0
 support = Everywhere
 platform_adhesion = None
 support_dual_extrusion = Second extruder
-wipe_tower = False
-wipe_tower_volume = 15
+wipe_tower = True
+wipe_tower_volume = 25
 ooze_shield = True
 filament_diameter = 2.85
 filament_diameter2 = 2.85
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/semiflex_meduim-quality_TAZ_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/semiflex_meduim-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
new file mode 100644
index 0000000000..6fef5fffda
--- /dev/null
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/semiflex_meduim-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
@@ -0,0 +1,264 @@
+[profile]
+layer_height = 0.325
+wall_thickness = 1.2
+retraction_enable = True
+solid_layer_thickness = 0.65
+fill_density = 20
+perimeter_before_infill = True
+nozzle_size = 0.6
+print_speed = 18
+print_temperature = 220
+print_temperature2 = 0
+print_temperature3 = 0
+print_temperature4 = 0
+print_temperature5 = 0
+print_bed_temperature = 0
+support = None
+platform_adhesion = None
+support_dual_extrusion = Both
+wipe_tower = False
+wipe_tower_volume = 15
+ooze_shield = False
+filament_diameter = 2.85
+filament_diameter2 = 0
+filament_diameter3 = 0
+filament_diameter4 = 0
+filament_diameter5 = 0
+filament_flow = 110
+retraction_speed = 10
+retraction_amount = 3
+retraction_dual_amount = 16.5
+retraction_min_travel = 1.5
+retraction_combing = All
+retraction_minimal_extrusion = 0.005
+retraction_hop = 0.1
+bottom_thickness = 0.4
+layer0_width_factor = 125
+object_sink = 0.0
+overlap_dual = 0.15
+travel_speed = 175
+bottom_layer_speed = 12
+infill_speed = 20
+solidarea_speed = 14
+inset0_speed = 14
+insetx_speed = 16
+cool_min_layer_time = 20
+fan_enabled = True
+skirt_line_count = 1
+skirt_gap = 3.0
+skirt_minimal_length = 250
+fan_full_height = 0.5
+fan_speed = 100
+fan_speed_max = 100
+cool_min_feedrate = 10
+cool_head_lift = False
+solid_top = True
+solid_bottom = True
+fill_overlap = 15
+support_type = Lines
+support_angle = 45
+support_fill_rate = 30
+support_xy_distance = 0.7
+support_z_distance = 0.05
+spiralize = False
+simple_mode = False
+brim_line_count = 10
+raft_margin = 5.0
+raft_line_spacing = 3.0
+raft_base_thickness = 0.3
+raft_base_linewidth = 1.0
+raft_interface_thickness = 0.27
+raft_interface_linewidth = 0.4
+raft_airgap_all = 0.0
+raft_airgap = 0.5
+raft_surface_layers = 2
+raft_surface_thickness = 0.27
+raft_surface_linewidth = 0.4
+fix_horrible_union_all_type_a = True
+fix_horrible_union_all_type_b = False
+fix_horrible_use_open_bits = False
+fix_horrible_extensive_stitching = False
+plugin_config = 
+object_center_x = -1
+object_center_y = -1
+simplemodesettings = 
+simplemodeprofile = 2_normal
+simplemodematerial = 1_pla
+
+[alterations]
+start.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	M104 S{print_temperature} ; change print temp for the current profile
+	G21                     ;metric values
+	G90                     ;absolute positioning
+	M82                     ;set extruder to absolute mode
+	M107                    ;start with the fan off
+	G28 X0 Y0               ;move X/Y to min endstops
+	G28 Z0                  ;move Z to min endstops
+	G1 Z15.0 F{travel_speed};move the platform down 15mm
+	G92 E0                  ; zero the extruded length
+	G1 F200 E0              ; extrude 3mm of feed stock
+	G92 E0                  ; zero the extruded length again
+	G1 F{travel_speed}      ; set travel speed
+	M203 X192 Y208 Z3       ; speed limits
+	M117 Printing...        ; send message to LCD
+end.gcode = M400
+	M104 S0                        ; hotend off
+	M140 S0                        ; heated bed heater off (if you have it)
+	M107                           ; fans off
+	G91                            ; relative positioning
+	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
+	G90                            ; absolute positioning
+	G1 X0 Y250                     ; move to cooling position
+	M84                            ; steppers off
+	G90                            ; absolute positioning
+	M117 TAZ Ready.
+	;{profile_string}
+start2.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end2.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start3.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T2                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end3.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+start4.gcode = ;Sliced at: {day} {date} {time}
+	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	;Print time: {print_time}
+	;Filament used: {filament_amount}m {filament_weight}g
+	;Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+	;M104 S{print_temperature} ;Uncomment to add your own temperature line
+	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+	G21        ;metric values
+	G90        ;absolute positioning
+	M107       ;start with the fan off
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	T3                      ;Switch to the 4th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T2                      ;Switch to the 3th extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T1                      ;Switch to the 2nd extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F200 E-{retraction_dual_amount}
+	T0                      ;Switch to the first extruder
+	G92 E0                  ;zero the extruded length
+	G1 F200 E10             ;extrude 10mm of feed stock
+	G92 E0                  ;zero the extruded length again
+	G1 F{travel_speed}
+	;Put printing message on LCD screen
+	M117 Printing...
+end4.gcode = ;End GCode
+	M104 T0 S0                     ;extruder heater off
+	M104 T1 S0                     ;extruder heater off
+	M104 T2 S0                     ;extruder heater off
+	M104 T3 S0                     ;extruder heater off
+	M140 S0                     ;heated bed heater off (if you have it)
+	G91                                    ;relative positioning
+	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
+	M84                         ;steppers off
+	G90                         ;absolute positioning
+	;{profile_string}
+support_start.gcode = 
+support_end.gcode = 
+cool_start.gcode = 
+cool_end.gcode = 
+replace.csv = 
+preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added before the T(n)
+postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
+	;This code is added after the T(n)
+