Incorporate profile naming updates

52 files changed, 0 insertions, 570 deletions

diff --git a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
deleted file mode 100644
index 42139fffc8..0000000000
--- a/resources/quickprint/lulzbot_profiles/Mini_flexystruder_v2/ninjaflex_medium-quality_Mini_flexystruder-v2_0.6noz_cura.ini
+++ /dev/null
@@ -1,299 +0,0 @@
-[profile]
-layer_height = 0.325
-wall_thickness = 0.6
-retraction_enable = True
-solid_layer_thickness = 0.65
-fill_density = 20
-perimeter_before_infill = True
-nozzle_size = 0.6
-print_speed = 50
-print_temperature = 222
-print_temperature2 = 0
-print_temperature3 = 0
-print_temperature4 = 0
-print_temperature5 = 0
-print_bed_temperature = 40
-support = None
-platform_adhesion = None
-support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
-ooze_shield = False
-filament_diameter = 2.85
-filament_diameter2 = 0
-filament_diameter3 = 0
-filament_diameter4 = 0
-filament_diameter5 = 0
-filament_flow = 100
-retraction_speed = 10
-retraction_amount = 3
-retraction_dual_amount = 16.5
-retraction_min_travel = 1.5
-retraction_combing = All
-retraction_minimal_extrusion = 0.005
-retraction_hop = 0.1
-bottom_thickness = 0.4
-layer0_width_factor = 125
-object_sink = 0.0
-overlap_dual = 0.15
-travel_speed = 175
-bottom_layer_speed = 8
-infill_speed = 18
-solidarea_speed = 18
-inset0_speed = 12
-insetx_speed = 16
-cool_min_layer_time = 20
-fan_enabled = True
-skirt_line_count = 1
-skirt_gap = 3.0
-skirt_minimal_length = 250
-fan_full_height = 0.5
-fan_speed = 100
-fan_speed_max = 100
-cool_min_feedrate = 10
-cool_head_lift = False
-solid_top = True
-solid_bottom = True
-fill_overlap = 15
-support_type = Lines
-support_angle = 45
-support_fill_rate = 30
-support_xy_distance = 0.7
-support_z_distance = 0.05
-spiralize = False
-simple_mode = False
-brim_line_count = 10
-raft_margin = 5.0
-raft_line_spacing = 3.0
-raft_base_thickness = 0.3
-raft_base_linewidth = 1.0
-raft_interface_thickness = 0.27
-raft_interface_linewidth = 0.4
-raft_airgap_all = 0.0
-raft_airgap = 0.5
-raft_surface_layers = 2
-raft_surface_thickness = 0.27
-raft_surface_linewidth = 0.4
-fix_horrible_union_all_type_a = True
-fix_horrible_union_all_type_b = False
-fix_horrible_use_open_bits = False
-fix_horrible_extensive_stitching = False
-plugin_config = 
-object_center_x = -1
-object_center_y = -1
-simplemodesettings = 
-simplemodeprofile = 2_normal
-simplemodematerial = 1_pla
-
-[alterations]
-start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Filament Diameter: {filament_diameter}
-	;Nozzle Size: {nozzle_size}
-	G21                          ; metric values
-	G90                          ; absolute positioning
-	M82                          ; set extruder to absolute mode
-	M107                         ; start with the fan off
-	G92 E0                       ; set extruder position to 0
-	M140 S{print_bed_temperature}; get bed heating up
-	G28                          ; home all
-	M109 S160                    ; set to cleaning temp and wait
-	G1 Z150 E-30 F75             ; suck up XXmm of filament
-	M109 S170                    ; heat up rest of way
-	G1 X45 Y174 F11520           ; move behind scraper
-	G1 Z0  F1200                 ; CRITICAL: set Z to height of top of scraper
-	G1 X45 Y174 Z-.5 F4000       ; wiping ; plunge into wipe pad
-	G1 X55 Y172 Z-.5 F4000       ; wiping
-	G1 X45 Y174 Z0 F4000         ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X45 Y174 F4000            ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X45 Y174 F4000            ; wiping
-	G1 X55 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X80 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X80 Y172 F4000            ; wiping
-	G1 X60 Y174 F4000            ; wiping
-	G1 X90 Y172 F4000            ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X80 Y174 F4000            ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X100 Y172 F4000           ; wiping
-	G1 X110 Y174 F4000           ; wiping
-	G1 X115 Y172 Z-0.5 F1000     ; wipe slower and bury noz in cleanish area
-	G1 Z10                       ; raise z
-	G28 X0 Y0                    ; home x and y
-	M109 S180                    ; set to probing temp
-	M204 S300                    ; Set probing acceleration
-	G29                          ; Probe
-	M204 S2000                   ; Restore standard acceleration
-	G1 X5 Y15 Z10 F5000          ; get out the way
-	G4 S1                        ; pause
-	M400                         ; clear buffer
-	M109 S{print_temperature}    ; set extruder temp and wait
-	G4 S15                       ; wait for bed to temp up
-	G1 Z2 E0 F75                 ; extrude filament back into nozzle
-	M140 S{print_bed_temperature}; get bed temping up during first layer
-end.gcode = 
-	M400
-	M104 S0                                      ; hotend off
-	M140 S0                                      ; heated bed heater off (if you have it)
-	M107                                         ; fans off
-	G92 E5                                       ; set extruder to 5mm for retract on print end
-	G1 X5 Y5 Z156 E0 F10000                      ; move to cooling positioning
-	M190 R50                                     ; wait for bed to cool
-	M104 S0                                      ;
-	G1 X145 Y175 Z156 F1000                      ; move to cooling positioning
-	M84                                          ; steppers off
-	G90                                          ; absolute positioning
-	;{profile_string}
-start2.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end2.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-start3.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T2                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end3.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M104 T2 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-start4.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T3                      ;Switch to the 4th extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T2                      ;Switch to the 3th extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end4.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M104 T2 S0                     ;extruder heater off
-	M104 T3 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-support_start.gcode = 
-support_end.gcode = 
-cool_start.gcode = 
-cool_end.gcode = 
-replace.csv = 
-preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
-	;This code is added before the T(n)
-postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
-	;This code is added after the T(n)
-
diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/618-645_nylon_high-strength_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/618-645-nylon_high-strength_Mini_single-extruder-v2_0.5noz_cura.ini
index 546ab6a785..546ab6a785 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/618-645_nylon_high-strength_Mini_single-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/618-645-nylon_high-strength_Mini_single-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/README b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/README
deleted file mode 100644
index fd00a4ef42..0000000000
--- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/README
+++ /dev/null
@@ -1,7 +0,0 @@
-ALL CURA CONFIGS FOUND HERE ARE EXPERIMENTAL. USE AT YOUR OWN RISK!
-
-This directory is tracked with git. Use 'git log' to see previous commits.
-
-
-lulzbot-mini_cura_abs-hips_02.ini
-	2014-08-21: Nozzle cleaning and auto leveling is working as expected. Even with the first print the quality is generally good. The top layer infill is a bit overfilled. This config needs a little further tweaking but is easily usable.
diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/PP_conductive_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/protopasta-conductive_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
index ca96b2b090..ca96b2b090 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/PP_conductive_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/protopasta-conductive_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/PP_magnetic_iron_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/protopasta-magnetic-iron_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini
index f0600acd04..f0600acd04 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/PP_magnetic_iron_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/protopasta-magnetic-iron_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/PP_magnetic_iron_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/protopasta-magnetic-iron_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
index c4b42cb93d..c4b42cb93d 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/PP_magnetic_iron_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/protopasta-magnetic-iron_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/PP_stainless_steel_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/protopasta-stainless-steel_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini
index f0600acd04..f0600acd04 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/PP_stainless_steel_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/protopasta-stainless-steel_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/PP_stainless_steel_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/protopasta-stainless-steel_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
index c4b42cb93d..c4b42cb93d 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/PP_stainless_steel_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/protopasta-stainless-steel_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/T-Glase_high-clarity_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/t-glase_high-clarity_Mini_single-extruder-v2_0.5noz_cura.ini
index d9d8cb641d..d9d8cb641d 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/T-Glase_high-clarity_Mini_single-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/t-glase_high-clarity_Mini_single-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/T-Glase_high-strength_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/t-glase_high-strength_Mini_single-extruder-v2_0.5noz_cura.ini
index 8d50cd6515..8d50cd6515 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/T-Glase_high-strength_Mini_single-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/t-glase_high-strength_Mini_single-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/ABS_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/ABS-ABS_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
index 1d70e1ea90..1d70e1ea90 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/ABS_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/ABS-ABS_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA-PLA_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
index 37913fddde..37913fddde 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_dual_color_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA-PLA_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA-PVA-support_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
index f9523f6fa3..f9523f6fa3 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v1/PLA-PVA-support_medium-quality_TAZ_dual-extruder-v1_0.35noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS-ABS_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index fce767914b..fce767914b 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS-ABS_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS-ABS_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
index bc2e50644a..bc2e50644a 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS-ABS_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS-ABS_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index 1c6c0bd6a0..1c6c0bd6a0 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/ABS-ABS_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PLA_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index f222cd9f91..f222cd9f91 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PLA_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PLA_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
index 1f48ace905..1f48ace905 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PLA_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PLA_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index a2cafa59ae..a2cafa59ae 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_dual_color_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PLA_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PVA-support_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index dcb7a7e39e..dcb7a7e39e 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PVA-support_high-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PVA-support_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
index f6079ccfc8..f6079ccfc8 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PVA-support_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PVA-support_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
index bbecad4b37..bbecad4b37 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA_PVA_support_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-PVA-support_medium-quality_TAZ_dual-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PP-conductive-PLA_PLA_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-protopasta-conductive-PLA_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
index 411522de3c..411522de3c 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PP-conductive-PLA_PLA_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_dual_extruder_v2/PLA-protopasta-conductive-PLA_high-speed_TAZ_dual-extruder-v2_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS-ninjaflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
index 32f7b7807a..32f7b7807a 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS-ninjaflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_semiflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS-semiflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
index f03b372340..f03b372340 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS_semiflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/ABS-semiflex_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/PLA_PVA_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/PLA-PVA_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
index 60ad795bee..60ad795bee 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/PLA_PVA_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v1/PLA-PVA_medium-quality_TAZ_FlexyDually-v1_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-ninjaflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
index 01682443f8..01682443f8 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-ninjaflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-ninjaflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index d8b7ad157a..d8b7ad157a 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-ninjaflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-ninjaflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index 5ac65bf5cb..5ac65bf5cb 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_ninjaflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-ninjaflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-semiflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
index 01682443f8..01682443f8 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-semiflex_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-semiflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index d8b7ad157a..d8b7ad157a 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-semiflex_high_quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-semiflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index 5ac65bf5cb..5ac65bf5cb 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS_semiflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/ABS-semiflex_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_support_high-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA-PVA_high-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index 092234f9ee..092234f9ee 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_support_high-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA-PVA_high-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_support_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA-PVA_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
index fc2d68e712..fc2d68e712 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_support_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA-PVA_high-speed_TAZ_FlexyDually-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_support_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA-PVA_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
index d82eb224d0..d82eb224d0 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA_PVA_support_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_flexy_dually_v2/PLA-PVA_medium-quality_TAZ_FlexyDually-v2_0.6noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/semiflex_medium-quality_TAZ_flexystruder-v2_0.6noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/semiflex_medium-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
deleted file mode 100644
index 6fef5fffda..0000000000
--- a/resources/quickprint/lulzbot_profiles/TAZ_flexystruder_v2/semiflex_medium-quality_TAZ_flexystruder-v2_0.6noz_cura.ini
+++ /dev/null
@@ -1,264 +0,0 @@
-[profile]
-layer_height = 0.325
-wall_thickness = 1.2
-retraction_enable = True
-solid_layer_thickness = 0.65
-fill_density = 20
-perimeter_before_infill = True
-nozzle_size = 0.6
-print_speed = 18
-print_temperature = 220
-print_temperature2 = 0
-print_temperature3 = 0
-print_temperature4 = 0
-print_temperature5 = 0
-print_bed_temperature = 0
-support = None
-platform_adhesion = None
-support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
-ooze_shield = False
-filament_diameter = 2.85
-filament_diameter2 = 0
-filament_diameter3 = 0
-filament_diameter4 = 0
-filament_diameter5 = 0
-filament_flow = 110
-retraction_speed = 10
-retraction_amount = 3
-retraction_dual_amount = 16.5
-retraction_min_travel = 1.5
-retraction_combing = All
-retraction_minimal_extrusion = 0.005
-retraction_hop = 0.1
-bottom_thickness = 0.4
-layer0_width_factor = 125
-object_sink = 0.0
-overlap_dual = 0.15
-travel_speed = 175
-bottom_layer_speed = 12
-infill_speed = 20
-solidarea_speed = 14
-inset0_speed = 14
-insetx_speed = 16
-cool_min_layer_time = 20
-fan_enabled = True
-skirt_line_count = 1
-skirt_gap = 3.0
-skirt_minimal_length = 250
-fan_full_height = 0.5
-fan_speed = 100
-fan_speed_max = 100
-cool_min_feedrate = 10
-cool_head_lift = False
-solid_top = True
-solid_bottom = True
-fill_overlap = 15
-support_type = Lines
-support_angle = 45
-support_fill_rate = 30
-support_xy_distance = 0.7
-support_z_distance = 0.05
-spiralize = False
-simple_mode = False
-brim_line_count = 10
-raft_margin = 5.0
-raft_line_spacing = 3.0
-raft_base_thickness = 0.3
-raft_base_linewidth = 1.0
-raft_interface_thickness = 0.27
-raft_interface_linewidth = 0.4
-raft_airgap_all = 0.0
-raft_airgap = 0.5
-raft_surface_layers = 2
-raft_surface_thickness = 0.27
-raft_surface_linewidth = 0.4
-fix_horrible_union_all_type_a = True
-fix_horrible_union_all_type_b = False
-fix_horrible_use_open_bits = False
-fix_horrible_extensive_stitching = False
-plugin_config = 
-object_center_x = -1
-object_center_y = -1
-simplemodesettings = 
-simplemodeprofile = 2_normal
-simplemodematerial = 1_pla
-
-[alterations]
-start.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	M104 S{print_temperature} ; change print temp for the current profile
-	G21                     ;metric values
-	G90                     ;absolute positioning
-	M82                     ;set extruder to absolute mode
-	M107                    ;start with the fan off
-	G28 X0 Y0               ;move X/Y to min endstops
-	G28 Z0                  ;move Z to min endstops
-	G1 Z15.0 F{travel_speed};move the platform down 15mm
-	G92 E0                  ; zero the extruded length
-	G1 F200 E0              ; extrude 3mm of feed stock
-	G92 E0                  ; zero the extruded length again
-	G1 F{travel_speed}      ; set travel speed
-	M203 X192 Y208 Z3       ; speed limits
-	M117 Printing...        ; send message to LCD
-end.gcode = M400
-	M104 S0                        ; hotend off
-	M140 S0                        ; heated bed heater off (if you have it)
-	M107                           ; fans off
-	G91                            ; relative positioning
-	G1 E-1 F300                    ; retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F3000   ; move Z up a bit and retract filament even more
-	G90                            ; absolute positioning
-	G1 X0 Y250                     ; move to cooling position
-	M84                            ; steppers off
-	G90                            ; absolute positioning
-	M117 TAZ Ready.
-	;{profile_string}
-start2.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end2.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-start3.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T2                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end3.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M104 T2 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-start4.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T3                      ;Switch to the 4th extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T2                      ;Switch to the 3th extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end4.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M104 T2 S0                     ;extruder heater off
-	M104 T3 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-support_start.gcode = 
-support_end.gcode = 
-cool_start.gcode = 
-cool_end.gcode = 
-replace.csv = 
-preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
-	;This code is added before the T(n)
-postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
-	;This code is added after the T(n)
-
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/Laybrick_medium-quality_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/laybrick_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
index a3790e5d00..a3790e5d00 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/Laybrick_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/laybrick_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/Laywood_medium-quality_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/laywood_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
index 1dcf8779b1..1dcf8779b1 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/Laywood_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/laywood_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/PP-conductive-PLA_medium-quality_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/protopasta-conductive-PLA_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
index 0ed5434e04..0ed5434e04 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/PP-conductive-PLA_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/protopasta-conductive-PLA_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/PP-magnetic-iron_high-speed_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/protopasta-magnetic-iron_high-speed_TAZ_single-extruder_0.35noz_cura.ini
index 148322ac8e..148322ac8e 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/PP-magnetic-iron_high-speed_TAZ_single-extruder_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/protopasta-magnetic-iron_high-speed_TAZ_single-extruder_0.35noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/PP-magnetic-iron_medium-quality_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/protopasta-magnetic-iron_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
index d3a34466d0..d3a34466d0 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/PP-magnetic-iron_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/protopasta-magnetic-iron_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/PP_stainless_steel_high-speed_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/protopasta-stainless-steel_high-speed_TAZ_single-extruder_0.35noz_cura.ini
index 148322ac8e..148322ac8e 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/PP_stainless_steel_high-speed_TAZ_single-extruder_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/protopasta-stainless-steel_high-speed_TAZ_single-extruder_0.35noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/PP_stainless_steel_medium-quality_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/protopasta-stainless-steel_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
index d3a34466d0..d3a34466d0 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/PP_stainless_steel_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/protopasta-stainless-steel_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/T-Glase_medium-quality_TAZ_single-extruder_0.35noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/t-glase_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
index cea15e5691..cea15e5691 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/T-Glase_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.35nozzle/t-glase_medium-quality_TAZ_single-extruder_0.35noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/nylon618-645_high-strength_TAZ_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/618-645-nylon_high-strength_TAZ_single-extruder_0.5noz_cura.ini
index 509ce4c886..509ce4c886 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/nylon618-645_high-strength_TAZ_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/618-645-nylon_high-strength_TAZ_single-extruder_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/PP-conductive-PLA_medium-quality_TAZ_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/protopasta-conductive-PLA_medium-quality_TAZ_single-extruder_0.5noz_cura.ini
index 7308cb9041..7308cb9041 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/PP-conductive-PLA_medium-quality_TAZ_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/protopasta-conductive-PLA_medium-quality_TAZ_single-extruder_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/PP-magnetic-iron_high-speed_TAZ_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/protopasta-magnetic-iron_high-speed_TAZ_single-extruder_0.5noz_cura.ini
index f319badf5e..f319badf5e 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/PP-magnetic-iron_high-speed_TAZ_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/protopasta-magnetic-iron_high-speed_TAZ_single-extruder_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/PP-magnetic-iron_medium-quality_TAZ_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/protopasta-magnetic-iron_medium-quality_TAZ_single-extruder_0.5noz_cura.ini
index 45746e763c..45746e763c 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/PP-magnetic-iron_medium-quality_TAZ_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/protopasta-magnetic-iron_medium-quality_TAZ_single-extruder_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/PP-stainless-steel_high-speed_TAZ_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/protopasta-stainless-steel_high-speed_TAZ_single-extruder_0.5noz_cura.ini
index f319badf5e..f319badf5e 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/PP-stainless-steel_high-speed_TAZ_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/protopasta-stainless-steel_high-speed_TAZ_single-extruder_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/PP-stainless-steel_medium-quality_TAZ_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/protopasta-stainless-steel_medium-quality_TAZ_single-extruder_0.5noz_cura.ini
index 45746e763c..45746e763c 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/PP-stainless-steel_medium-quality_TAZ_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/protopasta-stainless-steel_medium-quality_TAZ_single-extruder_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/T-Glase_high-clarity_TAZ_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/t-glase_high-clarity_TAZ_single-extruder_0.5noz_cura.ini
index 1d6f8c65bf..1d6f8c65bf 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/T-Glase_high-clarity_TAZ_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/t-glase_high-clarity_TAZ_single-extruder_0.5noz_cura.ini
diff --git a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/T-Glase_high-strength_TAZ_single-extruder_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/t-glase_high-strength_TAZ_single-extruder_0.5noz_cura.ini
index 27eef3e523..27eef3e523 100644
--- a/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/T-Glase_high-strength_TAZ_single-extruder_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/TAZ_single_extruder_0.5nozzle/t-glase_high-strength_TAZ_single-extruder_0.5noz_cura.ini