diff options
| author | Youness Alaoui <kakaroto@kakaroto.homelinux.net> | 2015-07-31 23:28:45 +0300 |
|---|---|---|
| committer | Youness Alaoui <kakaroto@kakaroto.homelinux.net> | 2015-07-31 23:28:45 +0300 |
| commit | 804c942bd617f6559475839501cfd7b18ad57dc4 (patch) | |
| tree | ea518c966ff250162f26f91189bbcd4faa37147d /resources | |
| parent | 707526252f6dccca50e7c7f193003ce7a1f42096 (diff) | |
| parent | d4183ffdffc9ea9d3c4a267426720d5693269cbe (diff) | |
Merge branch 'new-settings' into devel
This merges a few missed commits
Diffstat (limited to 'resources')
40 files changed, 0 insertions, 2952 deletions
diff --git a/resources/quickprint/lulzbot_TAZ_5/ABS/High/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/ABS/High/profile.ini index de9538ef98..de9538ef98 100644 --- a/resources/quickprint/lulzbot_TAZ_5/ABS/High/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/ABS/High/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/ABS/Low/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/ABS/Low/profile.ini index 8cb8b287cb..8cb8b287cb 100644 --- a/resources/quickprint/lulzbot_TAZ_5/ABS/Low/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/ABS/Low/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/ABS/Normal/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/ABS/Normal/profile.ini index eb96c3407a..eb96c3407a 100644 --- a/resources/quickprint/lulzbot_TAZ_5/ABS/Normal/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/ABS/Normal/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/ABS/Ulti/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/ABS/Ulti/profile.ini index e60192f116..e60192f116 100644 --- a/resources/quickprint/lulzbot_TAZ_5/ABS/Ulti/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/ABS/Ulti/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/ABS/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/ABS/profile.ini index 97adfc3e31..97adfc3e31 100644 --- a/resources/quickprint/lulzbot_TAZ_5/ABS/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/ABS/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/HIPS/High/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/HIPS/High/profile.ini index 35a4f97b79..35a4f97b79 100644 --- a/resources/quickprint/lulzbot_TAZ_5/HIPS/High/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/HIPS/High/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/HIPS/Low/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/HIPS/Low/profile.ini index 96141e0e05..96141e0e05 100644 --- a/resources/quickprint/lulzbot_TAZ_5/HIPS/Low/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/HIPS/Low/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/HIPS/Normal/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/HIPS/Normal/profile.ini index 0b42f04a3e..0b42f04a3e 100644 --- a/resources/quickprint/lulzbot_TAZ_5/HIPS/Normal/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/HIPS/Normal/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/HIPS/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/HIPS/profile.ini index e4090d252e..e4090d252e 100644 --- a/resources/quickprint/lulzbot_TAZ_5/HIPS/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/HIPS/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/PET/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PET/profile.ini index 8425944580..8425944580 100644 --- a/resources/quickprint/lulzbot_TAZ_5/PET/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PET/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/PLA/High/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PLA/High/profile.ini index 1af0bfb543..1af0bfb543 100644 --- a/resources/quickprint/lulzbot_TAZ_5/PLA/High/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PLA/High/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/PLA/Low/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PLA/Low/profile.ini index d750173d7d..d750173d7d 100644 --- a/resources/quickprint/lulzbot_TAZ_5/PLA/Low/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PLA/Low/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/PLA/Normal/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PLA/Normal/profile.ini index 09a8d9f1a2..09a8d9f1a2 100644 --- a/resources/quickprint/lulzbot_TAZ_5/PLA/Normal/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PLA/Normal/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/PLA/Ulti/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PLA/Ulti/profile.ini index e60192f116..e60192f116 100644 --- a/resources/quickprint/lulzbot_TAZ_5/PLA/Ulti/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PLA/Ulti/profile.ini diff --git a/resources/quickprint/lulzbot_TAZ_5/PLA/profile.ini b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PLA/profile.ini index a70247b8b8..a70247b8b8 100644 --- a/resources/quickprint/lulzbot_TAZ_5/PLA/profile.ini +++ b/resources/quickprint/lulzbot_TAZ_5_035nozzle/PLA/profile.ini diff --git a/resources/quickprint/lulzbot_mini/Alloy910/Default/profile.ini b/resources/quickprint/lulzbot_mini/Alloy910/Default/profile.ini deleted file mode 100644 index 858e0e6ab9..0000000000 --- a/resources/quickprint/lulzbot_mini/Alloy910/Default/profile.ini +++ /dev/null @@ -1,292 +0,0 @@ -[info] -name = Default - -[profile] -layer_height = 0.25 -wall_thickness = 1 -retraction_enable = True -solid_layer_thickness = 1 -fill_density = 20 -nozzle_size = 0.5 -print_speed = 50 -print_temperature = 235 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_bed_temperature = 100 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1.5 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = True -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.425 -layer0_width_factor = 125 -object_sink = 0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 10 -infill_speed = 30 -inset0_speed = 20 -insetx_speed = 25 -cool_min_layer_time = 5 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 3 -fan_speed = 30 -fan_speed_max = 40 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0.7 -support_z_distance = 0.05 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap = 0.5 -raft_surface_layers = 2 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = -object_center_x = -1 -object_center_y = -1 - -[alterations] -start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Filament Diameter: {filament_diameter} - ;Nozzle Size: {nozzle_size} - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S160 ; set to cleaning temp and wait - G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S170 ; heat up rest of way - G1 X45 Y174 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y172 Z-.5 F4000 ; wiping - G1 X45 Y174 Z0 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X90 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area - G1 Z10 ; raise z - G28 X0 Y0 ; home x and y - M109 S170 ; set to probing temp - M204 S300 ; Set probing acceleration - G29 ; Probe - M204 S2000 ; Restore standard acceleration - G1 X5 Y15 Z10 F5000 ; get out the way - G4 S1 ; pause - M400 ; clear buffer - M109 S{print_temperature} ; set extruder temp and wait - G4 S15 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer -end.gcode = - M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E5 ; set extruder to 5mm for retract on print end - G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning - M190 R50 ; wait for bed to cool - M104 S0 ; - G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_mini/Alloy910/profile.ini b/resources/quickprint/lulzbot_mini/Alloy910/profile.ini deleted file mode 100644 index 583bcd2202..0000000000 --- a/resources/quickprint/lulzbot_mini/Alloy910/profile.ini +++ /dev/null @@ -1,2 +0,0 @@ -[info] -name = Taulman Alloy 910 diff --git a/resources/quickprint/lulzbot_mini/Bamboofill/Default/profile.ini b/resources/quickprint/lulzbot_mini/Bamboofill/Default/profile.ini deleted file mode 100644 index 12e3f6777f..0000000000 --- a/resources/quickprint/lulzbot_mini/Bamboofill/Default/profile.ini +++ /dev/null @@ -1,292 +0,0 @@ -[info] -always_visible = 0 - -[profile] -layer_height = 0.38 -wall_thickness = 1 -retraction_enable = True -solid_layer_thickness = 1 -fill_density = 20 -nozzle_size = 0.5 -print_speed = 50 -print_temperature = 190 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_bed_temperature = 60 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1.5 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = True -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.425 -layer0_width_factor = 125 -object_sink = 0.0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 15 -infill_speed = 50 -inset0_speed = 40 -insetx_speed = 45 -cool_min_layer_time = 20 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 75 -fan_speed_max = 100 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0.7 -support_z_distance = 0.05 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap = 0.5 -raft_surface_layers = 2 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = -object_center_x = -1 -object_center_y = -1 - -[alterations] -start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Filament Diameter: {filament_diameter} - ;Nozzle Size: {nozzle_size} - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S140 ; set to cleaning temp and wait - G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S140 ; heat up rest of way - G1 X45 Y174 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y172 Z-.5 F4000 ; wiping - G1 X45 Y174 Z0 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X90 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area - G1 Z10 ; raise z - G28 X0 Y0 ; home x and y - M109 S140 ; set to probing temp - M204 S300 ; Set probing acceleration - G29 ; Probe - M204 S2000 ; Restore standard acceleration - G1 X5 Y15 Z10 F5000 ; get out the way - G4 S1 ; pause - M400 ; clear buffer - M109 S{print_temperature} ; set extruder temp and wait - G4 S15 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer -end.gcode = - M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E5 ; set extruder to 5mm for retract on print end - G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning - M190 R50 ; wait for bed to cool - M104 S0 ; - G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_mini/Bamboofill/profile.ini b/resources/quickprint/lulzbot_mini/Bamboofill/profile.ini deleted file mode 100644 index 39600b373b..0000000000 --- a/resources/quickprint/lulzbot_mini/Bamboofill/profile.ini +++ /dev/null @@ -1,2 +0,0 @@ -[info] -name = ColorFab BambooFill diff --git a/resources/quickprint/lulzbot_mini/Bronzefill/Default/profile.ini b/resources/quickprint/lulzbot_mini/Bronzefill/Default/profile.ini deleted file mode 100644 index af0575bf09..0000000000 --- a/resources/quickprint/lulzbot_mini/Bronzefill/Default/profile.ini +++ /dev/null @@ -1,292 +0,0 @@ -[info] -always_visible = 0 - -[profile] -layer_height = 0.38 -wall_thickness = 1 -retraction_enable = True -solid_layer_thickness = 1 -fill_density = 20 -nozzle_size = 0.5 -print_speed = 50 -print_temperature = 230 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_bed_temperature = 60 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1.5 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = True -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.425 -layer0_width_factor = 125 -object_sink = 0.0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 15 -infill_speed = 40 -inset0_speed = 30 -insetx_speed = 35 -cool_min_layer_time = 20 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 75 -fan_speed_max = 100 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0.7 -support_z_distance = 0.05 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap = 0.5 -raft_surface_layers = 2 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = -object_center_x = -1 -object_center_y = -1 - -[alterations] -start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Filament Diameter: {filament_diameter} - ;Nozzle Size: {nozzle_size} - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S140 ; set to cleaning temp and wait - G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S140 ; heat up rest of way - G1 X45 Y174 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y172 Z-.5 F4000 ; wiping - G1 X45 Y174 Z0 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X90 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area - G1 Z10 ; raise z - G28 X0 Y0 ; home x and y - M109 S140 ; set to probing temp - M204 S300 ; Set probing acceleration - G29 ; Probe - M204 S2000 ; Restore standard acceleration - G1 X5 Y15 Z10 F5000 ; get out the way - G4 S1 ; pause - M400 ; clear buffer - M109 S{print_temperature} ; set extruder temp and wait - G4 S15 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer -end.gcode = - M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E5 ; set extruder to 5mm for retract on print end - G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning - M190 R50 ; wait for bed to cool - M104 S0 ; - G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_mini/Bronzefill/profile.ini b/resources/quickprint/lulzbot_mini/Bronzefill/profile.ini deleted file mode 100644 index cd3a1d88b6..0000000000 --- a/resources/quickprint/lulzbot_mini/Bronzefill/profile.ini +++ /dev/null @@ -1,2 +0,0 @@ -[info] -name = ColorFab BronzeFill diff --git a/resources/quickprint/lulzbot_mini/Copperfill/Default/profile.ini b/resources/quickprint/lulzbot_mini/Copperfill/Default/profile.ini deleted file mode 100644 index af0575bf09..0000000000 --- a/resources/quickprint/lulzbot_mini/Copperfill/Default/profile.ini +++ /dev/null @@ -1,292 +0,0 @@ -[info] -always_visible = 0 - -[profile] -layer_height = 0.38 -wall_thickness = 1 -retraction_enable = True -solid_layer_thickness = 1 -fill_density = 20 -nozzle_size = 0.5 -print_speed = 50 -print_temperature = 230 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_bed_temperature = 60 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1.5 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = True -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.425 -layer0_width_factor = 125 -object_sink = 0.0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 15 -infill_speed = 40 -inset0_speed = 30 -insetx_speed = 35 -cool_min_layer_time = 20 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 75 -fan_speed_max = 100 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0.7 -support_z_distance = 0.05 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap = 0.5 -raft_surface_layers = 2 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = -object_center_x = -1 -object_center_y = -1 - -[alterations] -start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Filament Diameter: {filament_diameter} - ;Nozzle Size: {nozzle_size} - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S140 ; set to cleaning temp and wait - G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S140 ; heat up rest of way - G1 X45 Y174 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y172 Z-.5 F4000 ; wiping - G1 X45 Y174 Z0 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X90 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area - G1 Z10 ; raise z - G28 X0 Y0 ; home x and y - M109 S140 ; set to probing temp - M204 S300 ; Set probing acceleration - G29 ; Probe - M204 S2000 ; Restore standard acceleration - G1 X5 Y15 Z10 F5000 ; get out the way - G4 S1 ; pause - M400 ; clear buffer - M109 S{print_temperature} ; set extruder temp and wait - G4 S15 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer -end.gcode = - M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E5 ; set extruder to 5mm for retract on print end - G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning - M190 R50 ; wait for bed to cool - M104 S0 ; - G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_mini/Copperfill/profile.ini b/resources/quickprint/lulzbot_mini/Copperfill/profile.ini deleted file mode 100644 index 07a511cf81..0000000000 --- a/resources/quickprint/lulzbot_mini/Copperfill/profile.ini +++ /dev/null @@ -1,2 +0,0 @@ -[info] -name = ColorFab CopperFill diff --git a/resources/quickprint/lulzbot_mini/HIPS/profile.ini b/resources/quickprint/lulzbot_mini/HIPS/profile.ini index b53aa6693f..e4090d252e 100644 --- a/resources/quickprint/lulzbot_mini/HIPS/profile.ini +++ b/resources/quickprint/lulzbot_mini/HIPS/profile.ini @@ -1,5 +1,4 @@ [info] name = HIPS order = 0 -default = 1 diff --git a/resources/quickprint/lulzbot_mini/Laybrick/Default/profile.ini b/resources/quickprint/lulzbot_mini/Laybrick/Default/profile.ini deleted file mode 100644 index 8fca049f28..0000000000 --- a/resources/quickprint/lulzbot_mini/Laybrick/Default/profile.ini +++ /dev/null @@ -1,292 +0,0 @@ -[info] -always_visible = 0 - -[profile] -layer_height = 0.2 -wall_thickness = 1 -retraction_enable = True -solid_layer_thickness = 1 -fill_density = 20 -nozzle_size = 0.5 -print_speed = 50 -print_temperature = 190 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_bed_temperature = 60 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1.5 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = True -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.425 -layer0_width_factor = 125 -object_sink = 0.0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 10 -infill_speed = 30 -inset0_speed = 25 -insetx_speed = 27.5 -cool_min_layer_time = 20 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 75 -fan_speed_max = 100 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0.7 -support_z_distance = 0.05 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap = 0.5 -raft_surface_layers = 2 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = -object_center_x = -1 -object_center_y = -1 - -[alterations] -start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Filament Diameter: {filament_diameter} - ;Nozzle Size: {nozzle_size} - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S140 ; set to cleaning temp and wait - G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S140 ; heat up rest of way - G1 X45 Y174 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y172 Z-.5 F4000 ; wiping - G1 X45 Y174 Z0 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X90 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area - G1 Z10 ; raise z - G28 X0 Y0 ; home x and y - M109 S140 ; set to probing temp - M204 S300 ; Set probing acceleration - G29 ; Probe - M204 S2000 ; Restore standard acceleration - G1 X5 Y15 Z10 F5000 ; get out the way - G4 S1 ; pause - M400 ; clear buffer - M109 S{print_temperature} ; set extruder temp and wait - G4 S15 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer -end.gcode = - M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E5 ; set extruder to 5mm for retract on print end - G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning - M190 R50 ; wait for bed to cool - M104 S0 ; - G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_mini/Laybrick/profile.ini b/resources/quickprint/lulzbot_mini/Laybrick/profile.ini deleted file mode 100644 index 010b5b4de2..0000000000 --- a/resources/quickprint/lulzbot_mini/Laybrick/profile.ini +++ /dev/null @@ -1,2 +0,0 @@ -[info] -name = LayBrick diff --git a/resources/quickprint/lulzbot_mini/Laywood/Default/profile.ini b/resources/quickprint/lulzbot_mini/Laywood/Default/profile.ini deleted file mode 100644 index 12e3f6777f..0000000000 --- a/resources/quickprint/lulzbot_mini/Laywood/Default/profile.ini +++ /dev/null @@ -1,292 +0,0 @@ -[info] -always_visible = 0 - -[profile] -layer_height = 0.38 -wall_thickness = 1 -retraction_enable = True -solid_layer_thickness = 1 -fill_density = 20 -nozzle_size = 0.5 -print_speed = 50 -print_temperature = 190 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_bed_temperature = 60 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1.5 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = True -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.425 -layer0_width_factor = 125 -object_sink = 0.0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 15 -infill_speed = 50 -inset0_speed = 40 -insetx_speed = 45 -cool_min_layer_time = 20 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 75 -fan_speed_max = 100 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0.7 -support_z_distance = 0.05 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap = 0.5 -raft_surface_layers = 2 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = -object_center_x = -1 -object_center_y = -1 - -[alterations] -start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Filament Diameter: {filament_diameter} - ;Nozzle Size: {nozzle_size} - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S140 ; set to cleaning temp and wait - G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S140 ; heat up rest of way - G1 X45 Y174 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y172 Z-.5 F4000 ; wiping - G1 X45 Y174 Z0 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X90 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area - G1 Z10 ; raise z - G28 X0 Y0 ; home x and y - M109 S140 ; set to probing temp - M204 S300 ; Set probing acceleration - G29 ; Probe - M204 S2000 ; Restore standard acceleration - G1 X5 Y15 Z10 F5000 ; get out the way - G4 S1 ; pause - M400 ; clear buffer - M109 S{print_temperature} ; set extruder temp and wait - G4 S15 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer -end.gcode = - M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E5 ; set extruder to 5mm for retract on print end - G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning - M190 R50 ; wait for bed to cool - M104 S0 ; - G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_mini/Laywood/profile.ini b/resources/quickprint/lulzbot_mini/Laywood/profile.ini deleted file mode 100644 index bebdfcd01a..0000000000 --- a/resources/quickprint/lulzbot_mini/Laywood/profile.ini +++ /dev/null @@ -1,2 +0,0 @@ -[info] -name = LayWood diff --git a/resources/quickprint/lulzbot_mini/N-Vent/option_test.ini b/resources/quickprint/lulzbot_mini/N-Vent/option_test.ini deleted file mode 100644 index e3eba69ee4..0000000000 --- a/resources/quickprint/lulzbot_mini/N-Vent/option_test.ini +++ /dev/null @@ -1,3 +0,0 @@ -[info] -name = This is only a test to show a material-specific option and UI resizing - diff --git a/resources/quickprint/lulzbot_mini/N-Vent/profile.ini b/resources/quickprint/lulzbot_mini/N-Vent/profile.ini deleted file mode 100644 index dbfa406c2d..0000000000 --- a/resources/quickprint/lulzbot_mini/N-Vent/profile.ini +++ /dev/null @@ -1,4 +0,0 @@ -[info] -name = N-Vent -order = 3 - diff --git a/resources/quickprint/lulzbot_mini/Nylon/HighStrength/profile.ini b/resources/quickprint/lulzbot_mini/Nylon/HighStrength/profile.ini deleted file mode 100644 index 4eab10c560..0000000000 --- a/resources/quickprint/lulzbot_mini/Nylon/HighStrength/profile.ini +++ /dev/null @@ -1,291 +0,0 @@ -[info] -name = High Strength - -[profile] -layer_height = .4 -wall_thickness = 1.2 -retraction_enable = True -solid_layer_thickness = 1.2 -fill_density = 30 -nozzle_size = .6 -print_speed = 20 -print_temperature = 240 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_bed_temperature = 110 -support = None -platform_adhesion = None -support_dual_extrusion = Second extruder -wipe_tower = True -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.89 -filament_diameter2 = 2.89 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1 -retraction_dual_amount = 25 -retraction_min_travel = 1.5 -retraction_combing = True -retraction_minimal_extrusion = 0.02 -retraction_hop = 0 -bottom_thickness = .5 -layer0_width_factor = 200 -object_sink = 0 -overlap_dual = 0 -travel_speed = 160 -bottom_layer_speed = 10 -infill_speed = 22 -inset0_speed = 15 -insetx_speed = 18 -cool_min_layer_time = 45 -fan_enabled = False -skirt_line_count = 2 -skirt_gap = 6 -skirt_minimal_length = 0 -fan_full_height = .5 -fan_speed = 40 -fan_speed_max = 50 -cool_min_feedrate = 7 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 10 -support_type = Grid -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0 -support_z_distance = 0 -spiralize = False -simple_mode = False -brim_line_count = 2 -raft_margin = 3 -raft_line_spacing = 1.0 -raft_base_thickness = .5 -raft_base_linewidth = 0.7 -raft_interface_thickness = 0.2 -raft_interface_linewidth = 0.2 -raft_airgap = 0.22 -raft_surface_layers = 2 -fix_horrible_union_all_type_a = False -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 - -[alterations] -start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Filament Diameter: {filament_diameter} - ;Nozzle Size: {nozzle_size} - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S140 ; set to cleaning temp and wait - G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S160 ; heat up rest of way - G1 X45 Y174 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y172 Z-.5 F4000 ; wiping - G1 X45 Y174 Z0 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X90 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area - G1 Z10 ; raise z - G28 X0 Y0 ; home x and y - M109 S160 ; set to probing temp - M204 S300 ; Set probing acceleration - G29 ; Probe - M204 S2000 ; Restore standard acceleration - G1 X5 Y15 Z10 F5000 ; get out the way - G4 S1 ; pause - M400 ; clear buffer - M109 S{print_temperature} ; set extruder temp and wait - G4 S15 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer -end.gcode = M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E5 ; set extruder to 5mm for retract on print end - G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning - M190 R50 ; wait for bed to cool - M104 S0 ; - G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_mini/Nylon/profile.ini b/resources/quickprint/lulzbot_mini/Nylon/profile.ini deleted file mode 100644 index 7f745398a5..0000000000 --- a/resources/quickprint/lulzbot_mini/Nylon/profile.ini +++ /dev/null @@ -1,2 +0,0 @@ -[info] -name = Taulman Nylon 618 & Nylon 645 diff --git a/resources/quickprint/lulzbot_mini/Polycarbonate/Fast/profile.ini b/resources/quickprint/lulzbot_mini/Polycarbonate/Fast/profile.ini deleted file mode 100644 index fcad0e2e48..0000000000 --- a/resources/quickprint/lulzbot_mini/Polycarbonate/Fast/profile.ini +++ /dev/null @@ -1,292 +0,0 @@ -[info] -name = Fast print - -[profile] -layer_height = 0.38 -wall_thickness = 1 -retraction_enable = True -solid_layer_thickness = 1 -fill_density = 20 -nozzle_size = 0.5 -print_speed = 50 -print_temperature = 290 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_bed_temperature = 110 -support = None -platform_adhesion = None -support_dual_extrusion = Both -wipe_tower = False -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.85 -filament_diameter2 = 0 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1.5 -retraction_dual_amount = 16.5 -retraction_min_travel = 1.5 -retraction_combing = True -retraction_minimal_extrusion = 0.005 -retraction_hop = 0.1 -bottom_thickness = 0.425 -layer0_width_factor = 125 -object_sink = 0.0 -overlap_dual = 0.15 -travel_speed = 175 -bottom_layer_speed = 15 -infill_speed = 40 -inset0_speed = 30 -insetx_speed = 35 -cool_min_layer_time = 20 -fan_enabled = True -skirt_line_count = 1 -skirt_gap = 3.0 -skirt_minimal_length = 250 -fan_full_height = 0.5 -fan_speed = 0 -fan_speed_max = 0 -cool_min_feedrate = 10 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 15 -support_type = Lines -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0.7 -support_z_distance = 0.05 -spiralize = False -simple_mode = False -brim_line_count = 10 -raft_margin = 5.0 -raft_line_spacing = 3.0 -raft_base_thickness = 0.3 -raft_base_linewidth = 1.0 -raft_interface_thickness = 0.27 -raft_interface_linewidth = 0.4 -raft_airgap = 0.5 -raft_surface_layers = 2 -fix_horrible_union_all_type_a = True -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = -object_center_x = -1 -object_center_y = -1 - -[alterations] -start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Filament Diameter: {filament_diameter} - ;Nozzle Size: {nozzle_size} - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S170 ; set to cleaning temp and wait - G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S180 ; heat up rest of way - G1 X45 Y174 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y172 Z-.5 F4000 ; wiping - G1 X45 Y174 Z0 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X90 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area - G1 Z10 ; raise z - G28 X0 Y0 ; home x and y - M109 S200 ; set to probing temp - M204 S300 ; Set probing acceleration - G29 ; Probe - M204 S2000 ; Restore standard acceleration - G1 X5 Y15 Z10 F5000 ; get out the way - G4 S1 ; pause - M400 ; clear buffer - M109 S{print_temperature} ; set extruder temp and wait - G4 S15 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer -end.gcode = - M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E5 ; set extruder to 5mm for retract on print end - G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning - M190 R50 ; wait for bed to cool - M104 S0 ; - G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_mini/Polycarbonate/option_brim.ini b/resources/quickprint/lulzbot_mini/Polycarbonate/option_brim.ini deleted file mode 100644 index 6c988c427c..0000000000 --- a/resources/quickprint/lulzbot_mini/Polycarbonate/option_brim.ini +++ /dev/null @@ -1,2 +0,0 @@ -[info] -disabled = 1 diff --git a/resources/quickprint/lulzbot_mini/Polycarbonate/option_support.ini b/resources/quickprint/lulzbot_mini/Polycarbonate/option_support.ini deleted file mode 100644 index 3332a4ae34..0000000000 --- a/resources/quickprint/lulzbot_mini/Polycarbonate/option_support.ini +++ /dev/null @@ -1,3 +0,0 @@ -[info] -disabled = 1 - diff --git a/resources/quickprint/lulzbot_mini/Polycarbonate/profile.ini b/resources/quickprint/lulzbot_mini/Polycarbonate/profile.ini deleted file mode 100644 index eb250667c6..0000000000 --- a/resources/quickprint/lulzbot_mini/Polycarbonate/profile.ini +++ /dev/null @@ -1,3 +0,0 @@ -[info] -name = Polycarbonate -order = 4 diff --git a/resources/quickprint/lulzbot_mini/T-Glase/HighClarity/profile.ini b/resources/quickprint/lulzbot_mini/T-Glase/HighClarity/profile.ini deleted file mode 100644 index 44605208b0..0000000000 --- a/resources/quickprint/lulzbot_mini/T-Glase/HighClarity/profile.ini +++ /dev/null @@ -1,291 +0,0 @@ -[info] -name = High Clarity - -[profile] -layer_height = .5 -wall_thickness = 1.2 -retraction_enable = True -solid_layer_thickness = 1.2 -fill_density = 30 -nozzle_size = .6 -print_speed = 20 -print_temperature = 240 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_bed_temperature = 60 -support = None -platform_adhesion = None -support_dual_extrusion = Second extruder -wipe_tower = True -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.89 -filament_diameter2 = 2.89 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1 -retraction_dual_amount = 25 -retraction_min_travel = 1.5 -retraction_combing = True -retraction_minimal_extrusion = 0.02 -retraction_hop = 0 -bottom_thickness = .5 -layer0_width_factor = 200 -object_sink = 0 -overlap_dual = 0 -travel_speed = 160 -bottom_layer_speed = 10 -infill_speed = 22 -inset0_speed = 15 -insetx_speed = 18 -cool_min_layer_time = 45 -fan_enabled = True -skirt_line_count = 2 -skirt_gap = 6 -skirt_minimal_length = 0 -fan_full_height = .5 -fan_speed = 40 -fan_speed_max = 50 -cool_min_feedrate = 7 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 10 -support_type = Grid -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0 -support_z_distance = 0 -spiralize = False -simple_mode = False -brim_line_count = 2 -raft_margin = 3 -raft_line_spacing = 1.0 -raft_base_thickness = .5 -raft_base_linewidth = 0.7 -raft_interface_thickness = 0.2 -raft_interface_linewidth = 0.2 -raft_airgap = 0.22 -raft_surface_layers = 2 -fix_horrible_union_all_type_a = False -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 - -[alterations] -start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Filament Diameter: {filament_diameter} - ;Nozzle Size: {nozzle_size} - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S140 ; set to cleaning temp and wait - G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S160 ; heat up rest of way - G1 X45 Y174 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y172 Z-.5 F4000 ; wiping - G1 X45 Y174 Z0 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X90 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area - G1 Z10 ; raise z - G28 X0 Y0 ; home x and y - M109 S160 ; set to probing temp - M204 S300 ; Set probing acceleration - G29 ; Probe - M204 S2000 ; Restore standard acceleration - G1 X5 Y15 Z10 F5000 ; get out the way - G4 S1 ; pause - M400 ; clear buffer - M109 S{print_temperature} ; set extruder temp and wait - G4 S15 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer -end.gcode = M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E5 ; set extruder to 5mm for retract on print end - G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning - M190 R50 ; wait for bed to cool - M104 S0 ; - G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_mini/T-Glase/HighStrength/profile.ini b/resources/quickprint/lulzbot_mini/T-Glase/HighStrength/profile.ini deleted file mode 100644 index c7dc519485..0000000000 --- a/resources/quickprint/lulzbot_mini/T-Glase/HighStrength/profile.ini +++ /dev/null @@ -1,292 +0,0 @@ -[info] -name = High Strength -order = 0 - -[profile] -layer_height = .3 -wall_thickness = 2 -retraction_enable = True -solid_layer_thickness = 1.2 -fill_density = 85 -nozzle_size = .5 -print_speed = 20 -print_temperature = 255 -print_temperature2 = 0 -print_temperature3 = 0 -print_temperature4 = 0 -print_bed_temperature = 60 -support = None -platform_adhesion = None -support_dual_extrusion = Second extruder -wipe_tower = True -wipe_tower_volume = 15 -ooze_shield = False -filament_diameter = 2.89 -filament_diameter2 = 2.89 -filament_diameter3 = 0 -filament_diameter4 = 0 -filament_flow = 100.0 -retraction_speed = 10 -retraction_amount = 1 -retraction_dual_amount = 25 -retraction_min_travel = 1.5 -retraction_combing = True -retraction_minimal_extrusion = 0.02 -retraction_hop = 0 -bottom_thickness = .425 -layer0_width_factor = 200 -object_sink = 0 -overlap_dual = 0 -travel_speed = 160 -bottom_layer_speed = 10 -infill_speed = 18 -inset0_speed = 10 -insetx_speed = 14 -cool_min_layer_time = 45 -fan_enabled = False -skirt_line_count = 2 -skirt_gap = 6 -skirt_minimal_length = 0 -fan_full_height = .5 -fan_speed = 40 -fan_speed_max = 50 -cool_min_feedrate = 7 -cool_head_lift = False -solid_top = True -solid_bottom = True -fill_overlap = 10 -support_type = Grid -support_angle = 45 -support_fill_rate = 30 -support_xy_distance = 0 -support_z_distance = 0 -spiralize = False -simple_mode = False -brim_line_count = 2 -raft_margin = 3 -raft_line_spacing = 1.0 -raft_base_thickness = .5 -raft_base_linewidth = 0.7 -raft_interface_thickness = 0.2 -raft_interface_linewidth = 0.2 -raft_airgap = 0.22 -raft_surface_layers = 2 -fix_horrible_union_all_type_a = False -fix_horrible_union_all_type_b = False -fix_horrible_use_open_bits = False -fix_horrible_extensive_stitching = False -plugin_config = (lp1 - . -object_center_x = -1 -object_center_y = -1 - -[alterations] -start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Filament Diameter: {filament_diameter} - ;Nozzle Size: {nozzle_size} - G21 ; metric values - G90 ; absolute positioning - M82 ; set extruder to absolute mode - M107 ; start with the fan off - G92 E0 ; set extruder position to 0 - M140 S{print_bed_temperature}; get bed heating up - G28 ; home all - M109 S140 ; set to cleaning temp and wait - G1 Z150 E-30 F75 ; suck up XXmm of filament - M109 S160 ; heat up rest of way - G1 X45 Y174 F11520 ; move behind scraper - G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper - G1 X45 Y174 Z-.5 F4000 ; wiping ; plunge into wipe pad - G1 X55 Y172 Z-.5 F4000 ; wiping - G1 X45 Y174 Z0 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X45 Y174 F4000 ; wiping - G1 X55 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X80 Y172 F4000 ; wiping - G1 X60 Y174 F4000 ; wiping - G1 X90 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X80 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X100 Y172 F4000 ; wiping - G1 X110 Y174 F4000 ; wiping - G1 X115 Y172 Z-0.5 F1000 ; wipe slower and bury noz in cleanish area - G1 Z10 ; raise z - G28 X0 Y0 ; home x and y - M109 S160 ; set to probing temp - M204 S300 ; Set probing acceleration - G29 ; Probe - M204 S2000 ; Restore standard acceleration - G1 X5 Y15 Z10 F5000 ; get out the way - G4 S1 ; pause - M400 ; clear buffer - M109 S{print_temperature} ; set extruder temp and wait - G4 S15 ; wait for bed to temp up - G1 Z2 E0 F75 ; extrude filament back into nozzle - M140 S{print_bed_temperature}; get bed temping up during first layer -end.gcode = M400 - M104 S0 ; hotend off - M140 S0 ; heated bed heater off (if you have it) - M107 ; fans off - G92 E5 ; set extruder to 5mm for retract on print end - G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning - M190 R50 ; wait for bed to cool - M104 S0 ; - G1 X145 Y175 Z156 F1000 ; move to cooling positioning - M84 ; steppers off - G90 ; absolute positioning - ;{profile_string} -start2.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end2.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning -start3.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T2 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end3.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -start4.gcode = ;Sliced at: {day} {date} {time} - ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} - ;Print time: {print_time} - ;Filament used: {filament_amount}m {filament_weight}g - ;Filament cost: {filament_cost} - ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line - ;M104 S{print_temperature} ;Uncomment to add your own temperature line - ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line - ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line - G21 ;metric values - G90 ;absolute positioning - M107 ;start with the fan off - G28 X0 Y0 ;move X/Y to min endstops - G28 Z0 ;move Z to min endstops - G1 Z15.0 F{travel_speed} ;move the platform down 15mm - T3 ;Switch to the 4th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T2 ;Switch to the 3th extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T1 ;Switch to the 2nd extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F200 E-{retraction_dual_amount} - T0 ;Switch to the first extruder - G92 E0 ;zero the extruded length - G1 F200 E10 ;extrude 10mm of feed stock - G92 E0 ;zero the extruded length again - G1 F{travel_speed} - ;Put printing message on LCD screen - M117 Printing... -end4.gcode = ;End GCode - M104 T0 S0 ;extruder heater off - M104 T1 S0 ;extruder heater off - M104 T2 S0 ;extruder heater off - M104 T3 S0 ;extruder heater off - M140 S0 ;heated bed heater off (if you have it) - G91 ;relative positioning - G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure - G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more - G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way - M84 ;steppers off - G90 ;absolute positioning - ;{profile_string} -support_start.gcode = -support_end.gcode = -cool_start.gcode = -cool_end.gcode = -replace.csv = -preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added before the T(n) -postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. - ;This code is added after the T(n) - diff --git a/resources/quickprint/lulzbot_mini/T-Glase/option_brim.ini b/resources/quickprint/lulzbot_mini/T-Glase/option_brim.ini deleted file mode 100644 index 6c988c427c..0000000000 --- a/resources/quickprint/lulzbot_mini/T-Glase/option_brim.ini +++ /dev/null @@ -1,2 +0,0 @@ -[info] -disabled = 1 diff --git a/resources/quickprint/lulzbot_mini/T-Glase/profile.ini b/resources/quickprint/lulzbot_mini/T-Glase/profile.ini deleted file mode 100644 index a1032bf655..0000000000 --- a/resources/quickprint/lulzbot_mini/T-Glase/profile.ini +++ /dev/null @@ -1,2 +0,0 @@ -[info] -name = T-Glase |